So I wanted to go back to custom ROM. I did task29 and now i am here, cleuless.
The kovsimg file can't be found on my X1. What do I have to do? Am I supposed to do HardSPL? Thats going to be hard without a OS I suppose.
are you entering bootloader?
caliban2 said:
are you entering bootloader?
Click to expand...
Click to collapse
Ofcourse ._.
Is there a way to do HardSPL via SD card? Because I think this might be my problem.
uhm... nope. hardspl stays forever, unless you flash stockspl. and that's a procedure you can't do by accident and without reading how to do it. (if you had done this, you wouldn't ask)
so, let's assume you have hardspl on your phone for a long time already:
a) make sure it's "kovsimg.nbh" in root of your sdcard
or
b) enter bootloader and connect to your pc -> usb-method
caliban2 said:
uhm... nope. hardspl stays forever, unless you flash stockspl. and that's a procedure you can't do by accident and without reading how to do it. (if you had done this, you wouldn't ask)
so, let's assume you have hardspl on your phone for a long time already:
a) make sure it's "kovsimg.nbh" in root of your sdcard
or
b) enter bootloader and connect to your pc -> usb-method
Click to expand...
Click to collapse
Already figured out, used an other SD card, still thanks though.
I think your sd card is(was) not formatted in FAT32
ady_95 said:
I think your sd card is(was) not formatted in FAT32
Click to expand...
Click to collapse
It depends mate, I've 2 SD cards that are formatted in FAT32 and both of them didn't work with the SD card method. (Tried 0.72 AND 0.78). However, the PC method works nicely with the 0.78.
Related
Hey everyone!
Read lots of threads here on the xda-developers forum, many questions, many answers, lots of "good guys" who are willing and able to help (many have helped me, thank you goes to them and all the others).
The bottom line:
Saw many many questions concerning flashing, bad flashes, error messages and so on.
I really don't know WHY people won't go for the easy way?
Flashing from a PC involves a USB connection through Activesync/WMDC, an application, we all know the procedure thanks to racerx_ (http://trinityguides.info). There are so many things that can go wrong: think about it, from unplugging the device, app error, comm error, power drop, connection drop, system hang and so on.
I don't know about the rest of you but I have done it the hard way but also learned to do it the easy/safe way. There's nothing more to the story than flashing from SD card. Procedure is well described in the Wiki (http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing).
I mean, all you have to do is press three buttons and wait for the flash, no risky connection drops, error messages, driver incompatibilites (see Vista problems), no app hangs.
I have tried many ROMs from over here and except for my first two flashes (first was Des' Crash Proof SPL, second was a cooked ROM) I've made them all using the SD card method and never got an error nor a situation with it.
So here's the question: why won't people flash the easy way?
well, have you actualy tried this procedure before posting this?
banesi said:
well, have you actualy tried this procedure before posting this?
Click to expand...
Click to collapse
Read my post once again, carefully.
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
banesi said:
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
Click to expand...
Click to collapse
Follow the steps carefully.
1. SD card with FAT32 and no label (it can contain other files, no need to wipe it)
2. Renamed nbh file to TRINIMG.nbh placed on SD card root
3. Power+Camera+Reset
4. Follow instructions on screen (Power button to brgin flash and Soft reset when prompted at the end).
It don't get any easier!
It SHOULD work.
Totally agree, I don't understand why ppl persist with the multitude of errors that crop up from flashing via active sync.
Using the SD card you can chuck a few ROMs on board to test and just rename each in turn to TRINIMG.nbh, move it to the SD root and enter boot loader.
Before I test a new ROM I make a static settings image with SPB Backup so I can flash back to the old ROM and restore back to how it was in a jiffy.
Just to point out for some ppl, some of the ROMs here are packaged into EXEs, you will need to extract the contents and only use the file named RUU_signed.nbh.
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Good thread
P3600i saga continues
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
remofo said:
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
Click to expand...
Click to collapse
No, sorry, it's not the way.
Flashing from SD card is not a workaround for bypassing SPL.
You still have to have some kind of a Hard SPL installed.
Please check the Wiki.
evojulz said:
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Click to expand...
Click to collapse
...and also bootscreens.
In other words, this method can flash any nbh file which could be flashed through the update utility method.
Easy and reliable
Fully agree with you tnyynt!
I always flash using the SD method.
Sometimes I even download the new nbh and keep it on the SD and upgrade later on when having time, not connected to a Pc... (I also have all the cab I need on my SD card).
Quick, easy and reliable (done many times).
Would be fine if the nbh would be released on this forum (rather than the .exe package).
Would allow to download them directly from the Trinity. i.e.: no more need for a Pc !!!
I always use this method, it is the only one that works for me and it's the most convenient I think.
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Speed
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Sure SD is faster
g77 said:
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Click to expand...
Click to collapse
I flashed recently FinixNOver 3.0.2 (BTW - superb ROM) - only OS + splashscreens and it took 2.5 mins in SD (regular 2GB miniSD SANDISK). I think it is fast enough...
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
jukkus said:
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Click to expand...
Click to collapse
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
manos_23 said:
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
Click to expand...
Click to collapse
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
racerx_ said:
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
Click to expand...
Click to collapse
Ok, and thank's you very much!
ctrlaltdel said:
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
Click to expand...
Click to collapse
Interesting, I'm sure someone will shoot me down but I'm not convinced it works with all SDHC cards... is your 4GB SDHC?
I can't get it to recognise the NBH from my 8GB but I have flashed many times successfully from my 2GB. Not to bothered, as long as it works
Nope, I'm using 2Gb normal sd-card. Also tried 512Mb card.
hey...
i cant install any custom rom on my xperia.
i installed HARD SPL.
and during the bootloader...
it says what it suppose to say like in the guide[of biovolt]
i meant during the bootloader...when the tri color screen appears.
it says
KOVS110
SPL-0.72. 01iNex
MicroP1-787
MicroP2-707
i formatted my memory card. [fat 32]
then i put the rom, on the root of the memory.
naming it Kovsimg.nbh
[and yes there is nothing but Kovsimg.nbh]
even then...
it says no image found during the bootloader.
anyone! help me!
please....
Did you try to use other Roms?
everything looks ok there should not be a problem. maybe your Kovsimg.nbh is corrupt.
there als can be a transfer fail, i had this problem i copy it to my sd card but couldn't flash it. when you copiyed the nbh to sd card don't pull it out wait a moment then try to take out the cable/sd card. this is what i did and worked for me.
commodoor said:
Did you try to use other Roms?
everything looks ok there should not be a problem. maybe your Kovsimg.nbh is corrupt.
there als can be a transfer fail, i had this problem i copy it to my sd card but couldn't flash it. when you copiyed the nbh to sd card don't pull it out wait a moment then try to take out the cable/sd card. this is what i did and worked for me.
Click to expand...
Click to collapse
yes , i did.
about 5 roms.
and it's not corrupted...
cause i always check...
even inside my phone via file manager also.
maybe it's my micro sd.
that's the problem.
igoodbyes said:
yes , i did.
about 5 roms.
and it's not corrupted...
cause i always check...
even inside my phone via file manager also.
maybe it's my micro sd.
that's the problem.
Click to expand...
Click to collapse
Then you know what to do. Try other sd cards.
you can find the problem by trial&error method. what it means is you just have to try different things to find whats wrong it is one off the most used methods.
commodoor said:
Then you know what to do. Try other sd cards.
you can find the problem by trial&error method. what it means is you just have to try different things to find whats wrong it is one off the most used methods.
Click to expand...
Click to collapse
haha
i agree
thank you
btw i got my rom changed via pc method...
which i dont mind using...haha
sorry for the trouble!
I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.
thedon809 said:
I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.
Click to expand...
Click to collapse
Well, if you are in bootloader and you got the USB sign on it you are ok. Try to flash another rom or reflash your stock rom.
Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.
thedon809 said:
Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.
Click to expand...
Click to collapse
Just look here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Hope that helps
I flashed that rom and it still does the same thing.
thedon809 said:
I flashed that rom and it still does the same thing.
Click to expand...
Click to collapse
Let's try this one my friend http://forum.xda-developers.com/showthread.php?t=335568 probably you can revert back to the original spl and stock rom
What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.
thedon809 said:
I think what I did was
Click to expand...
Click to collapse
That bit made me shiver.
stuntdouble said:
That bit made me shiver.
Click to expand...
Click to collapse
lol, I know that's exactly what I did. I was just saying, that I think that has something to do with it not charging and syncing. I'm not sure though, because I'm not a pro at flashing and all that. I can rebuild an engine, but I can't flash a stupid rom on a phone . Whatever I have to do to fix it, will have to work the next time because I only have about 60% battery left.
thedon809 said:
What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.
Click to expand...
Click to collapse
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.
thedon809 said:
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.
Click to expand...
Click to collapse
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked
gmaniac2008 said:
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked
Click to expand...
Click to collapse
My hp laptop conveniently has an sd card reader.
Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?
thedon809 said:
Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?
Click to expand...
Click to collapse
Follow the instructions of how to flash via sd card from here: http://forum.xda-developers.com/showpost.php?p=2741200&postcount=1
Do I have to change the name of the att hardspl to KAISIMG.NBH?
thedon809 said:
Do I have to change the name of the att hardspl to KAISIMG.NBH?
Click to expand...
Click to collapse
No.
(message too short so adding more letters to post comment.......)
Like the title says, any possible method on flashing does not work on my Xperia anymore....what to do now?
I use a card which has always worked with Flashing, and my PC recognizes my phone as long as it is not in bootloader.....
more info on "doesn't work", how doesn't it work?
also try formatting your card again
Reset?
I take it you've tried a hard reset?!
Have you searched the forum as well? There's quite a few threads about flashing problems. Your answer might be there somewhere already!
Also, you haven't posted which ROM you are using but if its a stock R3AA series ROM then it might have written the stock SPL back to your device (and new radio firmware too) so that might be your problem, since the stock SPL doesn't support SD card flashing.
Without more information on your problem I doubt anyone will be able to help!
The Rom I use is Touch it BL, and I have formatted the card several times, that is all the info I can give you I guess...any idea on how to solve this? And thanks in advance for the help, I read through a lot of the forum but nothing seemed to help me...
re-check the image file name, make sure it is not KOVSIMG.nbh.nbh
Did that too, still no results...
SyntheticDistortion said:
Like the title says, any possible method on flashing does not work on my Xperia anymore....what to do now?
I use a card which has always worked with Flashing, and my PC recognizes my phone as long as it is not in bootloader.....
Click to expand...
Click to collapse
does that mean you can't get into boot loader or that when you are in boot loader mode no image is found?
DrakenKorin said:
does that mean you can't get into boot loader or that when you are in boot loader mode no image is found?
Click to expand...
Click to collapse
No Image is found, not on the card and not via the USB :S
Did you make sure that the image file is copied on to the root directory of your storage card? What brand and size SD card are you using? Is it formatted Fat32? Also, try a different SD card as there have been some problems with certain brands. Could also be that the image file is corrupted. Might try a different image file.
Same problem here!!!
can't flash via card and activesync anymore recently!
AND must boot with usb cable with power to pass the bootloader, otherwise, the screen will stuck in tri-color screen
Make sure you're using a Micro SD and not a Micro SDHC as that usually has the issue you mentioned. If you can still boot to windows try to access the card and see if it's corrupted. You may have a dead card. Just a couple things to try.
Tried all that, after some trying I found out that the phone is performing well when it has started up, WMDC does what it's supposed to and the phone behaves well..untill I try to flash, as soon as it's in bootloader it seems like my PC doesn't recognise my phone and the phone doesn't recognise it's arttached to a computer...
SyntheticDistortion said:
Tried all that, after some trying I found out that the phone is performing well when it has started up, WMDC does what it's supposed to and the phone behaves well..untill I try to flash, as soon as it's in bootloader it seems like my PC doesn't recognise my phone and the phone doesn't recognise it's arttached to a computer...
Click to expand...
Click to collapse
Have you tried re-flashing the Hard SPL to your device?
I know you've said that you can't flash once you are in bootloader but flashing the Hard SPL might work even though flashing a new ROM didn't.
I had a related problem ages ago and re-flashing Hard SPL fixed it for me.
Fingers crossed for you!
Still nothing...I appreciate for the help guys...but I'm getting desperate here...nothing is working!
SyntheticDistortion said:
Still nothing...I appreciate for the help guys...but I'm getting desperate here...nothing is working!
Click to expand...
Click to collapse
sry I didn't post this earlier, hopefully it helps
bootloader app
DrakenKorin said:
sry I didn't post this earlier, hopefully it helps
bootloader app
Click to expand...
Click to collapse
Sorry mate...again I am stuck in bootloader and the phone is unwilling to co-operate any further..
I was try to do that RSPL thing and it errored.
after that the SPL doesn't show Serial or USB on the white color section.
and i usb connection on SPL doesn't work ...
How can i fix my SPL??
Pic on SPL : yfrog.com/h43yyehj
I think your only option at this point is to try GoldCard method
victorrica said:
How can i fix my SPL??
Click to expand...
Click to collapse
you half-bricked your device.
three possible solutions to your problem:
Goldcard method, here
Y-Cable method, here
jtag
I was wondering if this can be done by taking out the SD card and putting the stock ROM files on it, and then flashing it. Or using an old 2GB card with the files on it.
Just a question, no need for flaming
I don't think by removing the SD Card and reinsert it again can work.But who knows.The best way is using what sh4dow86 recommend.
Ttblondey said:
I don't think by removing the SD Card and reinsert it again can work.But who knows.The best way is using what sh4dow86 recommend.
Click to expand...
Click to collapse
I read somewhere that someone flashed using sd card, looked for guides but found nothing.