Cant flash stock firmware.nb0 file from stock recovery - Huawei Ideos X6

My usb cable doesnt work and I try to flash stock firmware.nb0 from wellcom a99 by stock recovery (power volum +, volum -) but recovery say that the file firmware.nb0 is not pass the check of it so I can flash my phone. So anyone can help me?

Rush to the nearest service center first of all and get the usb repaired ... u will face too many problems if u flash roms without working usb connection

dtbang721 said:
My usb cable doesnt work and I try to flash stock firmware.nb0 from wellcom a99 by stock recovery (power volum +, volum -) but recovery say that the file firmware.nb0 is not pass the check of it so I can flash my phone. So anyone can help me?
Click to expand...
Click to collapse
hi
go here : https://www.sugarsync.com/share/jvtv2zosagsz
download the same rename to firmware.nb0
put it on ur SD root not a folder and flash it via recovery
may be the copy u have is corrupted.Then give ur phone for service

If your USB is actually not working, you need to get it fixed from service centre.....

Related

HELP!! Bootloop!!!!

was trying out the app "Anim Mod" installed chose animation reboot..... now stuck in a bootloop. volume and power combo dosent work please please help!!
What?you mean you can't enter software upgrade mode?
nope i cant.... tried the known key combinations cant even get it to go into recovery or s/w update mode
tried pulling out the battery sim card and micro SD and then hold volume up and plug in the usb cable?
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Troubleshooting required..!!!
Hey guyz I need some help in getting down to download mode. I have a out of the box Captivate. I flashed and installed the latest version of Cyanogen mod 9 and was facing a problem in connecting to my laptop as it was not detecting and then downgraded to previous version to check.
Got stuck in boot and restarts repeatedly and the 3 button mode is not working. Could you help me get into Download or Recovery mode ....?
Sorry dude but people from thecaptivate forum could help you best
Sent from my LG-P970 using Tapatalk
Zaihanzainal said:
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Click to expand...
Click to collapse
And if it doesn't work, you can connect your phone to your computer, start adb shell and type in 'reboot recovery'. Your phone will enter cwm and you can restore a backup, reflash a rom..
I use this method if I get a bootloop. (I'm developing a rom.) I think it's very helpful, because you don't must use smartflashtool.
cakebomb.
in some situation adb cannot connect the phone and you have to use the smartflash tool
Anim Mod bootloop
I have the same problem here! I got bootloop after using anim mod. I'm able to go to stock recovery. I had backup my file then did factory reset but problem still not solved. I had backup my framework-res.apk file but it's not on a flashable zip format.
i've tried using apk multi tool on trying to do and adb push but it's not working
what can I do next?
connect your phone to pc in s/w upgrade mode->pull out your battery, hold + and plug in the usb in phone..and after that, use smart flash tool to flash firmware(v20) with CWM included..and after firmware flash your phone will enter in CWM recovery, now from CWM you need to flash supersu from sd card..after flashing firmware and superuser, DO a data,cache,davlik cache wipe !..and just after this you can exit from CWM(reboot)
Here's a link to all tools that you need to repair your phone. You need to use smartflash tool, a V20 firmware with cwm( you can download it from here), and put the Superuser.zip to your sd card..and install USB driver if you haven't installed it yet
I use this method every time when my phone is stuck on bootloop or if I've flashed a ROM that doesn't have root..or other situations.. This method brings you to a rooted gingerbread with CWM(this is all what you need, because from here you can do what you want..for example flashing which ROM you like )
!!! You can use this method anytime...doesn't matter which ROM you have or if your phone is rooted or not. After using this method your phone will be fully rooted, will have CWM recovery and android 2.3 gingerbread !!!

[Q] recovery not working in x8

x recovery not working on my x8 handset....
if i reboot my handset in the x recovery mode then it reboots but it goes hangs into the boot screen...
plz help me for solving this problem....
On some ROMs reboot into recovery doesn't work. Try turn off your phone and after that turn on and tap rapidly back button (or volume down button). It should get into recovery mode.
if pressing back button dont work......just copy the xrecovery files again to the system/bin directory
binhari said:
if pressing back button dont work......just copy the xrecovery files again to the system/bin directory
Click to expand...
Click to collapse
with root explorer(find apk`s in the internet)of course
Installing Flashtool via FlashTool is the safest way and it works (Tested !)
1) Flash back the original firmware (.ftf) of the x8
2) root
3) install recovery
Maybe u do wrong when u put it in bin
Sent from my E15i using xda premium

[Q] Flash Custom ROM with Odin?

Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro

[Q] download mode problem ..power button not working

running jelly beer4 rom....
my power button ic on motherboard is melted....
cant use my power button..
how to go into download mode to unroot ans install stock rom
avid jinx said:
running jelly beer4 rom....
my power button ic on motherboard is melted....
cant use my power button..
how to go into download mode to unroot ans install stock rom
Click to expand...
Click to collapse
use ADB command to reboot into download mode and install stock rom from pc odin or simply use Mobile odin pro without the need of going into download mode.
command is
adb reboot download

My p9 was died .. still on ur device booting now screen

Hello ,
I have unlocked bootloader and rooted my phone
The. I changed the offical rom for unoffical rom
While i tried to flash the new android n 7.0 noghat its go die and i cant log to recovery mode just its still on ur device is unlocked and cant trusted , now i want someone help me to get the stock rom and how i can flash it with fastboot , i try to download stock roms but all theards take me to .app files and i cant use that methods with dead phone help me plz.
Hi,
U have an SD card? If yes, create on it a folder named dload and put the update.app in it. Start your phone with 3 keys (vol down, vol up and power) hold and wait until it shows the update screen.
dkionline said:
Hi,
U have an SD card? If yes, create on it a folder named dload and put the update.app in it. Start your phone with 3 keys (vol down, vol up and power) hold and wait until it shows the update screen.
Click to expand...
Click to collapse
I will try it
its dont work with (wol down , wol up , power key)
alwayes still on that screen Says to me
ur phone booting up...
i want just login to recovery but its didnt work
Thx for ur care man , i have resloved the issue and booting my phone up .. close this theard
ruzitu said:
Thx for ur care man , i have resloved the issue and booting my phone up .. close this theard
Click to expand...
Click to collapse
how have you solved the problem pls ? I've got the same here and no SD card
Download stock rom and download huawei update extarctor , unzip stock rom to update.app open extrcator click on browse button and chhoae the update.app , then click with multi on boot.img , recovery.img , system.img .. and extract all to adb&fastboot folder and flash it all
Use this commands to flash :
1- fastboot flash boot boot.img
2- fastboot flash recovery recovery.img
3- fastboot flash system system.img .. this step take a while wait for finish .. and begin ur phone again

Categories

Resources