How to flash Darky XXJVT Base RE
http://www.hdtechvideo.com/?p=216
Great. Could you do a video for installing CM7 on the I9000 that is stock. Thanks.
Sent from my GT-I9000 using XDA App
ehtoeh said:
Great. Could you do a video for installing CM7 on the I9000 that is stock. Thanks.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Already made the video.. will upload soon...
Related
Ive just flashed ficeto's jvp and now want to try TweakyRom. However, in the guide it says to make you have gingerbread bootloaders. How do i check if i have them and if not how do i get them?
If your jvp is working then you have gb bootloaders, to change bootloaders use ezboot in dev section
Sent from my GT-I9000 using XDA Premium App
slaphead20 said:
If your jvp is working then you have gb bootloaders, to change bootloaders use ezboot in dev section
Are you sure I have the bootloaders? I dont want to mess this.up
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
seeraj15 said:
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Well to be safe in your own mind just flash ezboot gb, then you are certain!
Insanity cm 012/glitch
If you have Froyo bootloaders but Gingerbread ROM, you'll se multicoloured stripes while booting.
Ive just flashed juwe's 5.0 and now there is no baseband version meaning i cant make or recieve calls or anything like that. What do i do?
You've flashed correctly and done all the steps described in the flashing manual? If you had Froyo before: did you flash a Gingerbread-firmware including bootloader?
Lunchbox115 said:
You've flashed correctly and done all the steps described in the flashing manual? If you had Froyo before: did you flash a Gingerbread-firmware including bootloader?
Click to expand...
Click to collapse
I was on gingerbread jvp so I assumed I already had the gingerbread bootloaders, correct?
Sent from my GT-I9000 using XDA App
Well, if you update from Froyo to Ginger via Odin you have to flash a Ginger-vresion including the bootloaders (here on XDA there are mostyl versions WITH and version WITHOUT bootloader available, and you need one WITH bl.).
You could try to flash a modem seperatly with Odin, but normally everything should work with Juwe's 5.0.
But i wasnt on froyo, i was on gingerbread so i must of already had gingerbread bootloaders? Anyway if i didnt have the bootloaders why did it still boot me into juwe 5.0?
Hm, ok. Were you able to make calls with your previous Ginger-ROM?
If I was you I'd flash stock-Ginger again and - if the telephone-function works - flash Juwe's 5.0.
Yes I was able to make calls.
Sent from my GT-I9000 using XDA App
seeraj15 said:
Yes I was able to make calls. How should I flash stock gingerbread. Atm I am back on jvp with dark core 2.7.3.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Just flash a modem!
U can pick the JVP one from my rom addons
Sent from my GT-I9000 using XDA Premium App
simone201 said:
Just flash a modem!
U can pick the JVP one from my rom addons
But I'm not on your rom, will it matter?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
seeraj15 said:
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Modems are UNIVERSAL for ALL roms!
Flash directly with no probs
Sent from my GT-I9000 using XDA Premium App
simone201 said:
Modems are UNIVERSAL for ALL roms!
Flash directly with no probs
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Not correct, there are seperatly modems for CM7 for example. But for Samsung-based ROMs you are right.
simone201 said:
Modems are UNIVERSAL for ALL roms!
Flash directly with no probs
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I cant find the jvp one from your addons
Sent from my GT-I9000 using XDA App
Hey, My phone is Galaxy GT I-9000 and I'm using CM 10 Stable and Semaphore Kernel 2.6.5s and for some reason the youtube isn't working... can anyone help me with that please?
did you enabled bigmem in semaphore app
or did you flash the 720p patch
erpurohit said:
did you enabled bigmem in semaphore app
or did you flash the 720p patch
Click to expand...
Click to collapse
I fllashed the one with the s... I guess it's the 720p one... cause i didn't enable bigmem in the semaphore app... 720p not working means no youtube on the phone?
you need to flash the 720p patch also...
Blackherted said:
Hey, My phone is Galaxy GT I-9000 and I'm using CM 10 Stable and Semaphore Kernel 2.6.5s and for some reason the youtube isn't working... can anyone help me with that please?
Click to expand...
Click to collapse
You don't flash the 's' version with CM10.
Sent from my GT-I9000 using xda premium
NIMBAH said:
You don't flash the 's' version with CM10.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
why?.... I am using it....
I suppose using the s version explains why I can't steam videos, at all...
Sent from my GT-I9000 using xda premium
hi guys, help me to downgrade from cm 10.1 to cm 7.2.0
i wanna downgrade to gingerbread cm 7.2.0 from cm-10.1-20130813-NIGHTLY,
i know i have to use odin flash, but i dont know the way of flash via odin, so any one can help me out here?
thanks
bangalimahbub said:
hi guys, help me to downgrade from cm 10.1 to cm 7.2.0
i wanna downgrade to gingerbread cm 7.2.0 from cm-10.1-20130813-NIGHTLY,
i know i have to use odin flash, but i dont know the way of flash via odin, so any one can help me out here?
thanks
Click to expand...
Click to collapse
Flash to stock via Odin. Then flash cwm and install cm7.2.0 plus GB gapps which you can find on too.im
Sent from my SGH-T959 using xda app-developers app
cannondaleV2000 said:
Flash to stock via Odin. Then flash cwm and install cm7.2.0 plus GB gapps which you can find on too.im
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
how i can flash to stock via odin?
which files i needed and how. i have no idea about it. noob here.
bangalimahbub said:
how i can flash to stock via odin?
which files i needed and how. i have no idea about it. noob here.
Click to expand...
Click to collapse
Look here at the link
http://forum.xda-developers.com/showthread.php?t=1647890
Sent from my SGH-T959 using xda app-developers app
cannondaleV2000 said:
Look here at the link
http://forum.xda-developers.com/showthread.php?t=1647890
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
http://www.ibtimes.co.uk/articles/4...9000-unroot-official-firmware-gingerbread.htm
can i use this instruction?
bangalimahbub said:
http://www.ibtimes.co.uk/articles/4...9000-unroot-official-firmware-gingerbread.htm
can i use this instruction?
Click to expand...
Click to collapse
As long as its for the i9000 then yes you can use it
Sent from my SGH-T959 using xda app-developers app
cannondaleV2000 said:
As long as its for the i9000 then yes you can use it
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Thanks
I have a simple Question! Which kernel in this following thread i have to choose?
When i'm on a Samsung Galaxy S I9000BOJP3
http://forum.xda-developers.com/showthread.php?t=788108
valykuu said:
I have a simple Question! Which kernel in this following thread i have to choose?
When i'm on a Samsung Galaxy S I9000BOJP3
http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
Hmm. I always flashed semaphore gingerbread .tar
Sent from my GT-I9000 using xda app-developers app
DerRomtester said:
Hmm. I always flashed semaphore gingerbread .tar
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for replying but i don't know which one should I download