I've had not luck with any button combination, battery pulling, pulling/installing the usb jib etc.
I have had NO luck.
I have noticed that the phone will go blank and NOT show the (phone-!-desktop) icon.
Please advise. Any and all attempts to put the phone into download does not work. The Jig actually just keep the phone screen, that's it.
The screen/ phone shows the 'phone ! computer' screen.
You are trying to use the jig with the phone powered off, right? Trying to use it with the phone on will not work at all.
mrhaley30705 said:
You are trying to use the jig with the phone powered off, right? Trying to use it with the phone on will not work at all.
Click to expand...
Click to collapse
The screen/ phone shows the 'phone ! computer' screen.
ericd1 said:
The screen/ phone shows the 'phone ! computer' screen.
Click to expand...
Click to collapse
Congratulations you have achieved download mode.
I am not amused by your phones performance
ericd1 said:
The screen/ phone shows the 'phone ! computer' screen.
Click to expand...
Click to collapse
Does it say something about firmware upgrade failure?
mrhaley30705 said:
Does it say something about firmware upgrade failure?
Click to expand...
Click to collapse
yes, and to try recovery mode.
no go on all
Doesn't matter if you use a JIG and and you get a random screen you always try to see if ODIN sees it....
prbassplayer said:
Doesn't matter if you use a JIG and and you get a random screen you always try to see if ODIN sees it....
Click to expand...
Click to collapse
ODIN recognizes a device. What then? Reinstalling anything failed.
Then its not the Jig's issue its either you doing it wrong or a faulty cable. Basics run ODIN as admin and put your phone in DL mode. Connect your phone to a Mother board usb hub and that should work. If that doesn't work then your cable could be faulty.
prbassplayer said:
Then its not the Jig's issue its either you doing it wrong or a faulty cable. Basics run ODIN as admin and put your phone in DL mode. Connect your phone to a Mother board usb hub and that should work. If that doesn't work then your cable could be faulty.
Click to expand...
Click to collapse
Yes sir. OK. I'll look into the cable question. It may well be the cable as I've experienced issues with it when putting movie files on the phone to play on TV in the past.
prbassplayer said:
Then its not the Jig's issue its either you doing it wrong or a faulty cable. Basics run ODIN as admin and put your phone in DL mode. Connect your phone to a Mother board usb hub and that should work. If that doesn't work then your cable could be faulty.
Click to expand...
Click to collapse
You were right on the money. Bought a new gigaware cable from the shack and was able to just simply work the ODIN magic on the phone. Wow. I'm amazed at how some problems have such simple solutions.
ericd1 said:
You were right on the money. Bought a new gigaware cable from the shack and was able to just simply work the ODIN magic on the phone. Wow. I'm amazed at how some problems have such simple solutions.
Click to expand...
Click to collapse
You should probably consider that before calling out someones product.
^ What he said. That being said Good to hear you got it running.
THANK YOU!
prbassplayer said:
Doesn't matter if you use a JIG and and you get a random screen you always try to see if ODIN sees it....
Click to expand...
Click to collapse
This post saved my phone. thank you for those words of WISDOM.:good:
Related
I don't know what I did but I can't get my phone to do anything. I tried to do a factory reset and now when I turn my phone on all it does is have this little computer voice saying factory reset detected. I tried the whole download thing over 100x's i'm getting pissed and I don't know what to do. I need my phone for work someone please help.
Can you get it into download mode? Put cable into usb on computer ( do not connect to phone ) pull battery on phone. hold down the volume button, plug battery in and then plug into usb should put it in download mode. If you can do that you can use Odin and flash the rom back on the phone. Follow this thread for files and directions.
http://forum.xda-developers.com/showthread.php?t=731989&highlight=Odin
No i can't get to download mode
Search out the jig solution to get into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
mcord11758 said:
Search out the jig solution to get into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
The resistor in the jig solution cost more than insurance I'm good lol.
Have you tried all the various button combos to get to Download Mode?
yes, I have tried them all. The only thing my phone does is boot the att logo then the galaxy s logo and then the screen turns black but the buttons stay lit.
Sounds like you'd benefit from a JIG, but it looks like you would rather replace the phone.
Good luck
have you seen the cost of the jig procedure. you would to lol
Jig is about 9$ if you do it the quick way, which is cheap. if you can order the breakout board then its about 5$
Have you tried to do a "adb reboot download" during the boot process ??
the little part you connect to your usb cable is 163 bucks
silvertag said:
Have you tried to do a "adb reboot download" during the boot process ??
Click to expand...
Click to collapse
i tried but command prompt says that their is no device found. I don't know if I'm doing anything wrong with the command prompt.
driver issue an or usb port on pc issue
Soulweaver said:
have you seen the cost of the jig procedure. you would to lol
Click to expand...
Click to collapse
I am VERY familiar with the JIG procedure (as you can see in my sig).
Soulweaver said:
the little part you connect to your usb cable is 163 bucks
Click to expand...
Click to collapse
That's a JTAG box, not a JIG
norcal einstein said:
That's a JTAG box, not a JIG
Click to expand...
Click to collapse
How would i go about buying one from you
in order to do your way what steps should i do all together for me to boot through adb
Soulweaver said:
How would i go about buying one from you
Click to expand...
Click to collapse
You can just PM me your PayPal address and I'll send over an invoice for you to pay if you'd like. $15 shipped and I can still get one out today.
norcal einstein said:
You can just PM me your PayPal address and I'll send over an invoice for you to pay if you'd like. $15 shipped and I can still get one out today.
Click to expand...
Click to collapse
sent you a pm
Like, this isn't even funny anymore. My phone is bricked and I've used the Jig. Now it doesn't even go to the download screen, it just skips to a Galaxy S Gt-i9000 screen and when I try to run Odin one click - it gets stuck on File Analysis.
/Worst brick ever
WHAT SHOULD I DO NOW??!?!??
What happens when you use jig
mcord11758 said:
What happens when you use jig
Click to expand...
Click to collapse
It goes to a screen that says...
GALAXY S
GTi-9000
SAMSUNG
miahsoul said:
Like, this isn't even funny anymore. My phone is bricked and I've used the Jig. Now it doesn't even go to the download screen, it just skips to a Galaxy S Gt-i9000 screen and when I try to run Odin one click - it gets stuck on File Analysis.
/Worst brick ever
WHAT SHOULD I DO NOW??!?!??
Click to expand...
Click to collapse
Okay, your phone is obviously getting to the stage that it can receive commands (seeing as Odin can recognize it). Download ADB (android debug bridge). I'm not going to go into a tutorial now. Ask if you need one, I'll write one.
Once you have that downloaded and installed, go to the directory containing adb.exe and type "adb reboot download" without the quotes. Your phone should reboot into download mode.
Edit: Found this standalone ADB file, in case you don't want to download and install the whole SDK. Props to velnens123.
BTW; I'm assuming you already have drivers for your phone installed. If not, this will not work, nor will pretty much anything else.
Loggik said:
Okay, your phone is obviously getting to the stage that it can receive commands (seeing as Odin can recognize it). Download ADB (android debug bridge). I'm not going to go into a tutorial now. Ask if you need one, I'll write one.
Once you have that downloaded and installed, go to the directory containing adb.exe and type "adb reboot download" without the quotes. Your phone should reboot into download mode.
Edit: Found this standalone ADB file, in case you don't want to download and install the whole SDK. Props to velnens123.
BTW; I'm assuming you already have drivers for your phone installed. If not, this will not work, nor will pretty much anything else.
Click to expand...
Click to collapse
Fingers crossed. Hope this works. :X
EDIT
"Device not found"
The drivers, I'm assume are the ones you need to mount the phone right?
miahsoul said:
It goes to a screen that says...
GALAXY S
GTi-9000
You are not touching the right prongs in the usb port
Click to expand...
Click to collapse
mcord11758 said:
You are not touching the right prongs in the usb port
Click to expand...
Click to collapse
Never heard that one before, but don't think that's possible. Some of the guides I've read suggest placing the resistors on the outside places of the usb port, not on any specific prong. Regardless, if his computer recognizes the phone (which it does... Odin can see it), then ADB should work perfectly.
mcord11758 said:
miahsoul said:
It goes to a screen that says...
GALAXY S
GTi-9000
You are not touching the right prongs in the usb port
Click to expand...
Click to collapse
Highly unlikely. When I do the button combo I get this screen too...
Click to expand...
Click to collapse
miahsoul said:
mcord11758 said:
Highly unlikely. When I do the button combo I get this screen too...
Click to expand...
Click to collapse
Trust me you are
Which button combo, that screen comes up when phone turns on
Click to expand...
Click to collapse
nbs11 said:
Drivers: http://www.mediafire.com/?fr8bkogcu923wdu
Click to expand...
Click to collapse
Those are the ones you need. Dunno if you have x64 or x32 Windows, but that file should have both.
Also, be sure to run ADB more than once. If you get Device Not Found, do not close the command prompt window, try unplugging and replugging the phone and wait for Windows to make it's hardware detected noise, then try again.
Yeah, the jig needs to be on pins 4&5, closest ones to headphone port iirc. Never had to use one personally but pretty sure that is what I've read.
jig can and will turn your phone in if the wrong prongs are touched
Thread is getting off topic; there are more than three posts about the same fix without a reply from the OP. Give it a rest...
Anyway, any proper jig should, should, be made with an actual mini USB, not just shoving the resistors into the phone, though it would work, it's just a lot less safe.
I have to agree with every one. I have had to make and use a jig. Sense I had it i tested all the how to's here and if you are not touching the right pins in the port (i highly suggest using a USB plug in) then all it will do is turn it on. They have to be touching pins 4 & 5 otherwise it will just boot up
Loggik said:
Those are the ones you need. Dunno if you have x64 or x32 Windows, but that file should have both.
Also, be sure to run ADB more than once. If you get Device Not Found, do not close the command prompt window, try unplugging and replugging the phone and wait for Windows to make it's hardware detected noise, then try again.
Click to expand...
Click to collapse
RGHHHHHHHH!!
I hear the sound that window makes when it detects the device, but ADB command prompt says error device not founddd.
Trust me, it's not the Jig, I've gotten it to start up to this screen 10 times with the closest to the jack.
mcord11758 said:
miahsoul said:
Trust me you are
Which button combo, that screen comes up when phone turns on
Click to expand...
Click to collapse
Vol up + Down
Done the way you said to do it in my last thread.
Click to expand...
Click to collapse
Have you fixed it yet?
I bricked my captivate pretty badly about 1.5 months ago too but i built a jig and fixed it. It doesn't sound like you've done that yet, though...
If i were you I'd build a jig and make sure the pins and resistances are correct and try again. I've heard the resistance from the skin on your fingers can affect it enough that it not work.
I attached a picture showing which pins to connect on a micro-usb "plug in"
Good luck,
Eric
ericstewart22 said:
Have you fixed it yet?
I bricked my captivate pretty badly about 1.5 months ago too but i built a jig and fixed it. It doesn't sound like you've done that yet, though...
If i were you I'd build a jig and make sure the pins and resistances are correct and try again. I've heard the resistance from the skin on your fingers can affect it enough that it not work.
I attached a picture showing which pins to connect on a micro-usb "plug in"
Good luck,
Eric
Click to expand...
Click to collapse
I made a jig, just not with the USB one. :S
I'll probably just buy one off of Ebay for simplicity's sake and lack of interest of wasting more time. I spent more time :/
Can anyone here tell me how C-fone is?
http://cgi.ebay.com/Samsung-Galaxy-...Cell_Phones&hash=item230d45e4ec#ht_546wt_1156
He seems legit to me, but I just want other member feedback to make sure.
I've sold to quite a few on here for what it's worth.
miahsoul said:
I made a jig, just not with the USB one. :S
I'll probably just buy one off of Ebay for simplicity's sake and lack of interest of wasting more time. I spent more time :/
Can anyone here tell me how C-fone is?
http://cgi.ebay.com/Samsung-Galaxy-...Cell_Phones&hash=item230d45e4ec#ht_546wt_1156
He seems legit to me, but I just want other member feedback to make sure.
Click to expand...
Click to collapse
Never bought a jig... never really had to (I just got mine replaced under thirty days). I can't give feedback on someone I've never bought from, though he seems to have some considerable rep (positive feedback). I can recommend though, this http://www.mobiletechvideos.com/blog/?page_id=100
Though for considerably more ($13.00), I can guarantee that that one will work.
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
a lot of users suggest others - who are having a similar problem with you, to try cleaning the usb port...
musashiro said:
a lot of users suggest others - who are having a similar problem with you, to try cleaning the usb port...
Click to expand...
Click to collapse
It looks clean. The cable is okay too. I'm working at Gameloft so we have lot's of micro-usb devices and they're working just fine with the exact same PC and cable.
Anyway, to be 100% sure - how to clean the port? I mean - it's so tiny little hole and there isn't any direct access to it.. But I think it's gone.. It randomly shows "charging" while the cable is not plugged at all. Then it stops.. and starts again.
ZeroCGTI said:
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
Click to expand...
Click to collapse
Put stock rom on your external sd,install mobile odin pro from market and use it to flash the stock rom.And remember donot select ever root,inject su,inject mobile odin.And after it finish flashing,you can send it for service
Put a stock rom and then try cleaning the USB as someone suggested. My usb port would stop working at random and I cleaned the port with a toothbrush and it has worked ever since. That was 2-3 months ago.
Well, thanks guys.. I'll try the tooth-brush trick when I get home and if it fails to solve the problem, I'm gonna flash the stock ROM with MOP and take it to the service. I'll keep you posted.
ZeroCGTI said:
It looks clean. The cable is okay too. I'm working at Gameloft so we have lot's of micro-usb devices and they're working just fine with the exact same PC and cable.
Anyway, to be 100% sure - how to clean the port? I mean - it's so tiny little hole and there isn't any direct access to it.. But I think it's gone.. It randomly shows "charging" while the cable is not plugged at all. Then it stops.. and starts again.
Click to expand...
Click to collapse
Work at GAMELOFT?!? Tell them to turn off the air push ads in my PAID game Shark Dash (turning them off in settings does ansolutey nothing)... Three emails to your support and NO reply. Pathetic
ZeroCGTI said:
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
Click to expand...
Click to collapse
download stock... flash it with mobile odin... dont forget to untick the forever root and cmw injection... ur note will be good as new...
sorry didint see vijays post... he has posted already...
kvsandeepreddy said:
download stock... flash it with mobile odin... dont forget to untick the forever root and cmw injection... ur note will be good as new...
sorry didint see vijays post... he has posted already...
Click to expand...
Click to collapse
If you want bone stock you have to use PC Odin not mobile
Atrix_E said:
If you want bone stock you have to use PC Odin not mobile
Click to expand...
Click to collapse
out of curiosity... what difference do u c when u flash a stock with pc odin or mobile odin???
kvsandeepreddy said:
out of curiosity... what difference do u c when u flash a stock with pc odin or mobile odin???
Click to expand...
Click to collapse
Not a difference you "see" technically. From my understanding mobile Odin cannot touch bootloaders. Pc Odin can. Someone can correct me if I'm wrong. From Chainfires first.post in his Mobile Odin thread, "While in theory Mobile ODIN can repartition and flash EFS and bootloaders, it will cowardly refuse to do so, for your own safety."
Atrix_E said:
If you want bone stock you have to use PC Odin not mobile
Click to expand...
Click to collapse
But his usb port doesnt work
vijai2011 said:
But his usb port doesnt work
Click to expand...
Click to collapse
Hadn't had my coffee yet lol. I woke up to an air push ad asking me to play Shark Dash
Atrix_E said:
Hadn't had my coffee yet lol. I woke up to an air push ad asking me to play Shark Dash
Click to expand...
Click to collapse
Lol go and sleep again thn...
Try another usb cable. You might be able to find one that fit better to the Note.
vijai2011 said:
Lol go and sleep again thn...
Click to expand...
Click to collapse
I'm about to carve up this shark and eat him for breakfast
Assumign that you have a micro SD in the slot-
Take the micro SD out and connect it to your computer. Or use airdroid for file transfer over wifi. Whichever way you use, create a folder called firmware and put the .md5 in the folder and flash it through CWM or mobile odin.
Atrix_E said:
I'm about to carve up this shark and eat him for breakfast
Click to expand...
Click to collapse
I already sent you a personal message.. And I'm not responsible for your problems btw! I'm not customer support after all..
ZeroCGTI said:
I already sent you a personal message.. And I'm not responsible for your problems btw! I'm not customer support after all..
Click to expand...
Click to collapse
Not just my problems but many other paid users if you read the Market comments. I know you're not responsible but if you're QA like you said, technically you are.
Anilisali method will work btw.
Atrix_E said:
Not just my problems but many other paid users if you read the Market comments. I know you're not responsible but if you're QA like you said, technically you are.
Anilisali method will work btw.
Click to expand...
Click to collapse
I'm a WEB-Tester, not a game tester It's not my business at all. Anyway, I asked for your email address if you're willing to get some help from me. Send me a PM and I'll see what I can do for you.
Hello, my situation is this: S3 Mini running Carbon Rom 4.4.4 , flashed with TWRP. After running great for a few weeks, suddenly after charging all night the phone froze ( was on FB on CM Browser). It was totally unresponsive to any attempts so I pulled the battery ( this did happen a couple times before) and when I tried to restart, nothing. The phone responds to nothing, no download, no recovery, no charger.... battery is charged and I did try a different battery to no avail. The only response I get is if it is connected to a PC before I install the battery then when I install it (the battery) the PC tries to install u8500 usb rom drivers, which of course it never finds. Samsung device drivers are installed on the PC. Odin also fails to see it.
Is it dead? Is it salvageable? Can I recover any data off it?
Sorry for the new thread but it seemed I could not find a case exactly like mine.
Pino Fundez said:
Hello, my situation is this: S3 Mini running Carbon Rom 4.4.4 , flashed with TWRP. After running great for a few weeks, suddenly after charging all night the phone froze ( was on FB on CM Browser). It was totally unresponsive to any attempts so I pulled the battery ( this did happen a couple times before) and when I tried to restart, nothing. The phone responds to nothing, no download, no recovery, no charger.... battery is charged and I did try a different battery to no avail. The only response I get is if it is connected to a PC before I install the battery then when I install it (the battery) the PC tries to install u8500 usb rom drivers, which of course it never finds. Samsung device drivers are installed on the PC. Odin also fails to see it.
Is it dead? Is it salvageable? Can I recover any data off it?
Sorry for the new thread but it seemed I could not find a case exactly like mine.
Click to expand...
Click to collapse
I had the same issue after flashing a wrong bootloader. I gave the phone back where I bought it telling that I doesn't know why he didn't started anymore. They replaced my telephone motherboard and now it works.
theov3rc0mer said:
I had the same issue after flashing a wrong bootloader. I gave the phone back where I bought it telling that I doesn't know why he didn't started anymore. They replaced my telephone motherboard and now it works.
Click to expand...
Click to collapse
There's no warranty on my device so taking it back is not an option. The phone was working fine for while so I suppose it's not the bootloader... what suprised me is that it happened outta the blue, not during start up... thanks for the advice though mate.
Pino Fundez said:
There's no warranty on my device so taking it back is not an option. The phone was working fine for while so I suppose it's not the bootloader... what suprised me is that it happened outta the blue, not during start up... thanks for the advice though mate.
Click to expand...
Click to collapse
I think you can try with an usb jig or you can find someone with a jtag (there are millions of guides about those solutions, just google it). :good:
theov3rc0mer said:
I think you can try with an usb jig or you can find someone with a jtag (there are millions of guides about those solutions, just google it). :good:
Click to expand...
Click to collapse
The jig I can do, no harm trying but the jtag is hard to find....
Guys i have this exact same problem and i'm getting desperate. i remember there was a special usb cable but i can't remember the name...
Could you please link me to anything? Absolutely anything? i really need this phone alive
M4v3r1cX said:
Guys i have this exact same problem and i'm getting desperate. i remember there was a special usb cable but i can't remember the name...
Could you please link me to anything? Absolutely anything? i really need this phone alive
Click to expand...
Click to collapse
basically from what I've read, the jig you either buy off Ebay for 3$ or solder 300kΩ across pins 4 and 5 of a micro usb connector, But look it up before cause a nuclear holocaust
Pino Fundez said:
basically from what I've read, the jig you either buy off Ebay for 3$ or solder 300kΩ across pins 4 and 5 of a micro usb connector, But look it up before cause a nuclear holocaust
Click to expand...
Click to collapse
Today i bought the usb jib and... no, it didn't work. God damn
I guess i'll just let the phone die and i'll buy a new one... it was a good phone.
M4v3r1cX said:
Today i bought the usb jib and... no, it didn't work. God damn
I guess i'll just let the phone die and i'll buy a new one... it was a good phone.
Click to expand...
Click to collapse
Honestly, I didnt think the jig would work, which is why Im not in much haste to do it, before you dump it though mate, try and find someone close to you with a JTAG setup.... I havent had much luck with that.
It was an ok phone... either I had high expectations or it was below the hype but that is just my 2 cents... at the end of the day it was a useful tool....
Hello.
When I try to power on the phone nothing happens.
The only thing I can feel — is a little vibration.
If I plug the charger, vibration becomes periodical.
Nothing more.
I can't plug it to the computer.
Windows doesn't see it, even doesn't show it as unknown device.
On *nix systems there is even nothing in dmesg.
So, is there any chance to resurrect the device?
That vibration let me hope for a miracle.
Thanks.
Have you tryed with microsoft device recovery tool?
augustinionut said:
Have you tryed with microsoft device recovery tool?
Click to expand...
Click to collapse
As I've said, I can't connect device to computer.
Really? Using this program?
augustinionut said:
Really? Using this program?
Click to expand...
Click to collapse
Yes, really, using this program.
It is not the matter of program or drivers.
I've already wrote that there is even nothing in dmesg, like I plug empty usb cable.
As I think you should take it to a service center of Microsoft to check status of your machine seems problematic
Check charge Battery and use Software Recovery Tools
chinitopex said:
Check charge Battery and use Software Recovery Tools
Click to expand...
Click to collapse
Battery is ok, also I've tried one from another device.
Software can't help! Device can not be connected to computer!
feherneoh said:
Check if there is an available emergency loader
If you find one, try forcing the phone into DLOAD mode
Click to expand...
Click to collapse
Can you please clarify, how can I find emergency loader? Thanks.
seelts said:
Can you please clarify, how can I find emergency loader? Thanks.
Click to expand...
Click to collapse
with windows phone recovery tool
it might be the USB PORT....
seelts said:
Hello.
When I try to power on the phone nothing happens.
The only thing I can feel — is a little vibration.
If I plug the charger, vibration becomes periodical.
Nothing more.
I can't plug it to the computer.
Windows doesn't see it, even doesn't show it as unknown device.
On *nix systems there is even nothing in dmesg.
So, is there any chance to resurrect the device?
That vibration let me hope for a miracle.
Thanks.
Click to expand...
Click to collapse
try buying a separated batt charger... once the batt is fully charged, it will boot up. no worries on software... it might be due to hardware... the charger pin (usb charger and data connection) might desolder due use and time... and if you where impatient, maaaybe it also might have damaged main board charging fuse...
it is repairable... but hard and not soft.
Guys,
I have few questions hope experts can solve.
Questions:
1. How to install xap from phone (not PC)
2. How can I access C: drive (like PC):crying: