Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
a lot of users suggest others - who are having a similar problem with you, to try cleaning the usb port...
musashiro said:
a lot of users suggest others - who are having a similar problem with you, to try cleaning the usb port...
Click to expand...
Click to collapse
It looks clean. The cable is okay too. I'm working at Gameloft so we have lot's of micro-usb devices and they're working just fine with the exact same PC and cable.
Anyway, to be 100% sure - how to clean the port? I mean - it's so tiny little hole and there isn't any direct access to it.. But I think it's gone.. It randomly shows "charging" while the cable is not plugged at all. Then it stops.. and starts again.
ZeroCGTI said:
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
Click to expand...
Click to collapse
Put stock rom on your external sd,install mobile odin pro from market and use it to flash the stock rom.And remember donot select ever root,inject su,inject mobile odin.And after it finish flashing,you can send it for service
Put a stock rom and then try cleaning the USB as someone suggested. My usb port would stop working at random and I cleaned the port with a toothbrush and it has worked ever since. That was 2-3 months ago.
Well, thanks guys.. I'll try the tooth-brush trick when I get home and if it fails to solve the problem, I'm gonna flash the stock ROM with MOP and take it to the service. I'll keep you posted.
ZeroCGTI said:
It looks clean. The cable is okay too. I'm working at Gameloft so we have lot's of micro-usb devices and they're working just fine with the exact same PC and cable.
Anyway, to be 100% sure - how to clean the port? I mean - it's so tiny little hole and there isn't any direct access to it.. But I think it's gone.. It randomly shows "charging" while the cable is not plugged at all. Then it stops.. and starts again.
Click to expand...
Click to collapse
Work at GAMELOFT?!? Tell them to turn off the air push ads in my PAID game Shark Dash (turning them off in settings does ansolutey nothing)... Three emails to your support and NO reply. Pathetic
ZeroCGTI said:
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
Click to expand...
Click to collapse
download stock... flash it with mobile odin... dont forget to untick the forever root and cmw injection... ur note will be good as new...
sorry didint see vijays post... he has posted already...
kvsandeepreddy said:
download stock... flash it with mobile odin... dont forget to untick the forever root and cmw injection... ur note will be good as new...
sorry didint see vijays post... he has posted already...
Click to expand...
Click to collapse
If you want bone stock you have to use PC Odin not mobile
Atrix_E said:
If you want bone stock you have to use PC Odin not mobile
Click to expand...
Click to collapse
out of curiosity... what difference do u c when u flash a stock with pc odin or mobile odin???
kvsandeepreddy said:
out of curiosity... what difference do u c when u flash a stock with pc odin or mobile odin???
Click to expand...
Click to collapse
Not a difference you "see" technically. From my understanding mobile Odin cannot touch bootloaders. Pc Odin can. Someone can correct me if I'm wrong. From Chainfires first.post in his Mobile Odin thread, "While in theory Mobile ODIN can repartition and flash EFS and bootloaders, it will cowardly refuse to do so, for your own safety."
Atrix_E said:
If you want bone stock you have to use PC Odin not mobile
Click to expand...
Click to collapse
But his usb port doesnt work
vijai2011 said:
But his usb port doesnt work
Click to expand...
Click to collapse
Hadn't had my coffee yet lol. I woke up to an air push ad asking me to play Shark Dash
Atrix_E said:
Hadn't had my coffee yet lol. I woke up to an air push ad asking me to play Shark Dash
Click to expand...
Click to collapse
Lol go and sleep again thn...
Try another usb cable. You might be able to find one that fit better to the Note.
vijai2011 said:
Lol go and sleep again thn...
Click to expand...
Click to collapse
I'm about to carve up this shark and eat him for breakfast
Assumign that you have a micro SD in the slot-
Take the micro SD out and connect it to your computer. Or use airdroid for file transfer over wifi. Whichever way you use, create a folder called firmware and put the .md5 in the folder and flash it through CWM or mobile odin.
Atrix_E said:
I'm about to carve up this shark and eat him for breakfast
Click to expand...
Click to collapse
I already sent you a personal message.. And I'm not responsible for your problems btw! I'm not customer support after all..
ZeroCGTI said:
I already sent you a personal message.. And I'm not responsible for your problems btw! I'm not customer support after all..
Click to expand...
Click to collapse
Not just my problems but many other paid users if you read the Market comments. I know you're not responsible but if you're QA like you said, technically you are.
Anilisali method will work btw.
Atrix_E said:
Not just my problems but many other paid users if you read the Market comments. I know you're not responsible but if you're QA like you said, technically you are.
Anilisali method will work btw.
Click to expand...
Click to collapse
I'm a WEB-Tester, not a game tester It's not my business at all. Anyway, I asked for your email address if you're willing to get some help from me. Send me a PM and I'll see what I can do for you.
Related
Hey there everyone, I have to take my phone to warranty tomorrow, and I am currently on Serendipity 6.2 and using the Paragon kernel. My problem is, I can't connect via USB, hence going to warranty. I can use swiFTP to get files to the SD and then cwr to flash them, but I don't know how to get back on the stock rom and master clear without odin..
Any help is really appreciated since I don't want to pay the $430 for broken warranty.
umm why cant you connect by usb?
and worse case scenario, they cant proove you voided the warranty if it never turns on again *for some reason*. the electronic guts are worth about $50 to them, they dont waste valuable time and specialized equiptment to read a broken device to see if you voided you warranty. its not financially feasable.
you would have to find a cwm stock flash NOT rooted, with stock kernel, could get messy...
I don't know why I can't connect, I got the phone from At&t as a warranty replacement, and it shows that it is connected (lightning bolt on battery) but it never actually charges or shows up on my computer. (Win7 64 bit)
do you have the drivers installed? the proper ones NOT the automatic ones?
Trusselo said:
do you have the drivers installed? the proper ones NOT the automatic ones?
Click to expand...
Click to collapse
Yes, I've tried every driver I can find. I know its the port on the phone, because when I go to use the wall charger, the phone says its "charging" but it doesn't go up at all.
Trusselo said:
if it never turns on again *for some reason*
Click to expand...
Click to collapse
+1
"Power Surge"
I think I got it. I flashed a KB1 rooted/deodexed rom and kernel, and my phone looks stock now Only problem, it shows superuser as an app. Any way to at least hide it/change name and icon?
wave it infront of a large speaker magnet for a while until it doesnt turn on.
or microwave for 2 second intervals. avoid physical damage!!
super user gone... and everything else
TAKE OUT YOUR SIM!!!!!!!!!!!
Poke around here a little more!
I am pretty sure I saw cwm flashable stock rom files on this forum. Might have been in the development sub-forum.
AReynante said:
I think I got it. I flashed a KB1 rooted/deodexed rom and kernel, and my phone looks stock now Only problem, it shows superuser as an app. Any way to at least hide it/change name and icon?
Click to expand...
Click to collapse
I think Clockwork can uninstall and reinstall Super User.
Sorry, it's SpeedMod that has that.
Say, nooby answer, but y not try the aio toolbox and try to boot into revovery? Just guessing....
Sent from my GT-I9000 using XDA App
I had a problem that sounded exactly like what your explaining and the only thing i needed to do to fix it was use a different usb cord. Bending the cheap pos cable from samsuck can break the soldered contact points more easily then you would think.
whiteguypl said:
I had a problem that sounded exactly like what your explaining and the only thing i needed to do to fix it was use a different usb cord. Bending the cheap pos cable from samsuck can break the soldered contact points more easily then you would think.
Click to expand...
Click to collapse
+1 ... that cable just screams "fragile"
Hi
Ive bricked my Tab from updating to Gingerbread through ODIN, I knocked the USB lead out by accident. The bootloader froze and couldn't get it to flash again, so I turned it off (BIG MISTAKE) and now it wont turn on. It won't boot in to bootloader mode either.
BUT
If I plug it in to my PC, it is recognised as 'SEC S5PC110 Test B/D'. The drivers wont install, if I hold the power button while plugged in to the PC then it disappears from Device Manager.
Ive searched the forums and found nobody with the same 'SEC S5PC110 Test B/D' detection.
Could somebody please help me, I cant find my receipt for it and im worried about the price of the repair.
Many Thanks
Ryan
does odin recognize it ? if does , flash again gingerbread and this time be more careful
k0sh said:
does odin recognize it ? if does , flash again gingerbread and this time be more careful
Click to expand...
Click to collapse
Thanks for the reply, I cant seem to get odin to recognize it. Only each time when I plug it in, 'SEC S5PC110 Test B/D' pops up trying to install drivers. I've left it to charge on the mains for the rest of the day and going to see if that helps.
Ive found a bank statement with my purchase on it, so I might be able to use that as a proof of purchase. Do you think I could get this repaired under warranty even though Ive bricked it?
Ryan_G said:
Thanks for the reply, I cant seem to get odin to recognize it. Only each time when I plug it in, 'SEC S5PC110 Test B/D' pops up trying to install drivers. I've left it to charge on the mains for the rest of the day and going to see if that helps.
Ive found a bank statement with my purchase on it, so I might be able to use that as a proof of purchase. Do you think I could get this repaired under warranty even though Ive bricked it?
Click to expand...
Click to collapse
Go ahead and do a RMA with Samsung, i'm sure they will send you a new device, or at least they can try to repair the broken one. Good luck!
PS. don't tell that you've bricked the tab!
lucian777 said:
Go ahead and do a RMA with Samsung, i'm sure they will send you a new device, or at least they can try to repair the broken one. Good luck!
PS. don't tell that you've bricked the tab!
Click to expand...
Click to collapse
Thanks,
what should I say in the description of fault, should I just say that the Tab wont turn on?
go ahead dude , they will fix it for u , in 20mins u don't leave without your tab
k0sh said:
go ahead dude , they will fix it for u , in 20mins u don't leave without your tab
Click to expand...
Click to collapse
Cheers, Just got my Tab back today all working. I will never leave without my tab
Keep It Safe
Ryan_G said:
Cheers, Just got my Tab back today all working. I will never leave without my tab
Click to expand...
Click to collapse
nice .. we should have a party now ... just be more careful next time and do NOT do anything without reading\understanding every step you going through
Cheers
I was trying to downgrade from 2.2 to 2.1 using odin3, and the process removed.
So i left it alone for a couple mins and the progress bar hadn't moved. So i unplugged the phone from the usb cable. Now the phone wont boot and wont go into download mode.
Any help would be massively appreciated.
{sry if its the wrong forum, this looked like the correct one}
Anyways thanks guys
SoLost89 said:
I was trying to downgrade from 2.2 to 2.1 using odin3, and the process removed.
So i left it alone for a couple mins and the progress bar hadn't moved. So i unplugged the phone from the usb cable. Now the phone wont boot and wont go into download mode.
Any help would be massively appreciated.
{sry if its the wrong forum, this looked like the correct one}
Anyways thanks guys
Click to expand...
Click to collapse
Is there any life at all on the phone, anything on the screen or do the buttons light up at all?
SoLost89 said:
I was trying to downgrade from 2.2 to 2.1 using odin3, and the process removed.
So i left it alone for a couple mins and the progress bar hadn't moved. So i unplugged the phone from the usb cable. Now the phone wont boot and wont go into download mode.
Any help would be massively appreciated.
{sry if its the wrong forum, this looked like the correct one}
Anyways thanks guys
Click to expand...
Click to collapse
I had this same thing done on my phone some time back.....!
since it is not getting into download mode just open odin first then connect your phone,hopefully it recognizes it.!
let us know if it works
There is no life on the phone at all.
Nothing lights up and nothing turns on.
When i plug it into my computer, neither odin nor my computer recognize that a device has been plugged in.
And i already checked the usb cable, works fine on my other phone
Thanks for the replys
SoLost89 said:
There is no life on the phone at all.
Nothing lights up and nothing turns on.
When i plug it into my computer, neither odin nor my computer recognize that a device has been plugged in.
And i already checked the usb cable, works fine on my other phone
Thanks for the replys
Click to expand...
Click to collapse
well i guess its a hard brick after all.....
here are your options that you can do:
1. You can call up samsung/ ATT and try to get a replacement captivate (data on phone
will be lost)
2. You can send your phone to connexion2005 (mobile tech videos), the have an
unbricking service for 50$
3. You can try Adam Outler's UnBrickable Mod :http://forum.xda-developers.com/showthread.php?t=1206216
Personally, I would take it to AT&T. I dunno how the stores around your area are, but I took it to a warranty center here in Cleveland, and they replaced it after looking at my old one for like 2 minutes. Sure it's a refurb, and it most likely will have a KB2 baseband making things a little trickier, but easiest (and cheapest) method by far.
How do you convince them to do a warranty claim with a bricked phone? Slightly curious. I know of insurance plans that provide more coverage but doesn't flashing the phone in any manner void the warranty on at&t, samsung, or even the insurance warranty?
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
Yeah im just going to go ahead and take it back to the att store.
xijar said:
How do you convince them to do a warranty claim with a bricked phone? Slightly curious. I know of insurance plans that provide more coverage but doesn't flashing the phone in any manner void the warranty on at&t, samsung, or even the insurance warranty?
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
Click to expand...
Click to collapse
They wont have time checking what you did with it,they will just try turning it on and if doesnt they just replace it....!
adicool said:
well i guess its a hard brick after all.....
here are your options that you can do:
1. You can call up samsung/ ATT and try to get a replacement captivate (data on phone
will be lost)
2. You can send your phone to connexion2005 (mobile tech videos), the have an
unbricking service for 50$
3. You can try Adam Outler's UnBrickable Mod :http://forum.xda-developers.com/showthread.php?t=1206216
Click to expand...
Click to collapse
UnBrickable Mod is not ready yet. We are working out the details of the communications protocol.
I provide JTAG unbricking service for $30. My method is a bit different then connexion2005. I don't fumble around with wires. I install a header which Samsung skimped out on during manufacturing. The header remains in the phone so it is a simple plug-in operation to reJTAG the phone later if required. This is the proper way of connecting to the JTAG port, through a JTAG header.
When I conect my Black to the pc there is no notification and there is nothing in the pc either. It charges but the Black doen't recognize that it is charging, if i go to the phone status in settings it says it's discharging. there is also a massive battery drain (about 45% at night) that I believe that's related to that since i've tried many different roms including the stock one.
This looks like the usb brick that happens a lot in htc, but I'm not sure.
Does anybody know what's wrong?
Have you tried flashing stock rom back onto it to make sure that it is not an error of the ROM?
This is probably obvious but have you tried reinstalling the USB drivers?
Have u tried mounting USB storage in CWM? Or are you willing to reformat ur SD card?
What is the current state of ur phone? What ROM, kernel, software version, etc?
Plenty of questions to answer so we can narrow down ur query or maybe even direct the questions to the maker of the ROM.
FunkyGanja said:
Have you tried flashing stock rom back onto it to make sure that it is not an error of the ROM?
This is probably obvious but have you tried reinstalling the USB drivers?
Have u tried mounting USB storage in CWM? Or are you willing to reformat ur SD card?
What is the current state of ur phone? What ROM, kernel, software version, etc?
Plenty of questions to answer so we can narrow down ur query or maybe even direct the questions to the maker of the ROM.
Click to expand...
Click to collapse
The drivers are instaled. I'm currently with zeus v6.39n and with the rom kernel, but I don't think that it has to do with it since i've tried other roms including the official one and the problem was the same. I'd would preffer not to format my sd card. Do you really think it could help?
NO it wont help. Are you able to charge your phone or not? And did you maybe put any liquid over it? Or maybe ran around with your phone in the rain? Should be pretty easy to solve, if you know someone with technical skills, or give it to a LG service center. I mean I may be wrong, but if it doesnt even recognize a charger, then the USB is definitly broke... If it is still charging properly, try to flash it with smartflash or B2C app if possible. If it doesnt get better then, your USB is definitly malfunctioning. Sorry dude...
N00BY0815 said:
NO it wont help. Are you able to charge your phone or not? And did you maybe put any liquid over it? Or maybe ran around with your phone in the rain? Should be pretty easy to solve, if you know someone with technical skills, or give it to a LG service center. I mean I may be wrong, but if it doesnt even recognize a charger, then the USB is definitly broke... If it is still charging properly, try to flash it with smartflash or B2C app if possible. If it doesnt get better then, your USB is definitly malfunctioning. Sorry dude...
Click to expand...
Click to collapse
Yeah. I figured that I would have to send it to Lg. I was just hoping for someone to have a solution since it's realy inconvinient to not have my phone.
But thanks anyway.
Have a look here: http://forum.xda-developers.com/showthread.php?p=29315863
Same issue, problem was short circuit in the board. Maybe suck up to some of ur friends who are good at circuits and get then to have a look.
Sent from my LG-P970 using Tapatalk 2
This happened to me. Sent it to service and they said it was a problem with the motherboars. So LG was kind enough to replace it for free and for less than 2 weeks
Hello, my situation is this: S3 Mini running Carbon Rom 4.4.4 , flashed with TWRP. After running great for a few weeks, suddenly after charging all night the phone froze ( was on FB on CM Browser). It was totally unresponsive to any attempts so I pulled the battery ( this did happen a couple times before) and when I tried to restart, nothing. The phone responds to nothing, no download, no recovery, no charger.... battery is charged and I did try a different battery to no avail. The only response I get is if it is connected to a PC before I install the battery then when I install it (the battery) the PC tries to install u8500 usb rom drivers, which of course it never finds. Samsung device drivers are installed on the PC. Odin also fails to see it.
Is it dead? Is it salvageable? Can I recover any data off it?
Sorry for the new thread but it seemed I could not find a case exactly like mine.
Pino Fundez said:
Hello, my situation is this: S3 Mini running Carbon Rom 4.4.4 , flashed with TWRP. After running great for a few weeks, suddenly after charging all night the phone froze ( was on FB on CM Browser). It was totally unresponsive to any attempts so I pulled the battery ( this did happen a couple times before) and when I tried to restart, nothing. The phone responds to nothing, no download, no recovery, no charger.... battery is charged and I did try a different battery to no avail. The only response I get is if it is connected to a PC before I install the battery then when I install it (the battery) the PC tries to install u8500 usb rom drivers, which of course it never finds. Samsung device drivers are installed on the PC. Odin also fails to see it.
Is it dead? Is it salvageable? Can I recover any data off it?
Sorry for the new thread but it seemed I could not find a case exactly like mine.
Click to expand...
Click to collapse
I had the same issue after flashing a wrong bootloader. I gave the phone back where I bought it telling that I doesn't know why he didn't started anymore. They replaced my telephone motherboard and now it works.
theov3rc0mer said:
I had the same issue after flashing a wrong bootloader. I gave the phone back where I bought it telling that I doesn't know why he didn't started anymore. They replaced my telephone motherboard and now it works.
Click to expand...
Click to collapse
There's no warranty on my device so taking it back is not an option. The phone was working fine for while so I suppose it's not the bootloader... what suprised me is that it happened outta the blue, not during start up... thanks for the advice though mate.
Pino Fundez said:
There's no warranty on my device so taking it back is not an option. The phone was working fine for while so I suppose it's not the bootloader... what suprised me is that it happened outta the blue, not during start up... thanks for the advice though mate.
Click to expand...
Click to collapse
I think you can try with an usb jig or you can find someone with a jtag (there are millions of guides about those solutions, just google it). :good:
theov3rc0mer said:
I think you can try with an usb jig or you can find someone with a jtag (there are millions of guides about those solutions, just google it). :good:
Click to expand...
Click to collapse
The jig I can do, no harm trying but the jtag is hard to find....
Guys i have this exact same problem and i'm getting desperate. i remember there was a special usb cable but i can't remember the name...
Could you please link me to anything? Absolutely anything? i really need this phone alive
M4v3r1cX said:
Guys i have this exact same problem and i'm getting desperate. i remember there was a special usb cable but i can't remember the name...
Could you please link me to anything? Absolutely anything? i really need this phone alive
Click to expand...
Click to collapse
basically from what I've read, the jig you either buy off Ebay for 3$ or solder 300kΩ across pins 4 and 5 of a micro usb connector, But look it up before cause a nuclear holocaust
Pino Fundez said:
basically from what I've read, the jig you either buy off Ebay for 3$ or solder 300kΩ across pins 4 and 5 of a micro usb connector, But look it up before cause a nuclear holocaust
Click to expand...
Click to collapse
Today i bought the usb jib and... no, it didn't work. God damn
I guess i'll just let the phone die and i'll buy a new one... it was a good phone.
M4v3r1cX said:
Today i bought the usb jib and... no, it didn't work. God damn
I guess i'll just let the phone die and i'll buy a new one... it was a good phone.
Click to expand...
Click to collapse
Honestly, I didnt think the jig would work, which is why Im not in much haste to do it, before you dump it though mate, try and find someone close to you with a JTAG setup.... I havent had much luck with that.
It was an ok phone... either I had high expectations or it was below the hype but that is just my 2 cents... at the end of the day it was a useful tool....