Related
Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
You've been here long enough to know that this doesnt belong in Dev.
DirtyShroomz said:
Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
Click to expand...
Click to collapse
The ones from Fresh Toast and Darchdroid are the only ones with setcpu. Or, you could compile his source. The best bet is to just run Fresh Toast.
DirtyShroomz said:
Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
Click to expand...
Click to collapse
for you to run the overcloked kernal u need to the kerrnal by toast but he hasnt publicly realesed it yet look for it today and tomorrow it probaly wont be a update.zip but if you know how they can be made but liliand has plans to use the kernal in his v2.5 rom so just wait a couple days
VinceOB said:
You've been here long enough to know that this doesnt belong in Dev.
Click to expand...
Click to collapse
Sry dude forgot about the q&a
I would say just run Fresh Toast 2.1 Final.. Its amazingly fast.
Also, I recommend overclock widget instead.. Flipz noticed that SetCPU was unnecessarily taking up over 10% of your CPU usage constantly, which doesn't sound like much, but it can add up quickly.
jUgGsY said:
I would say just run Fresh Toast 2.1 Final.. Its amazingly fast.
Also, I recommend overclock widget instead.. Flipz noticed that SetCPU was unnecessarily taking up over 10% of your CPU usage constantly, which doesn't sound like much, but it can add up quickly.
Click to expand...
Click to collapse
+1 Fresh Toast 2.1 w/ OCWidget. Works great for me.
DirtyShroomz said:
Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
Click to expand...
Click to collapse
Just rip the boot.img from Fresh 2.1OC, then implement it into regaws build.
It's actually a lot easier than it sounds.
Decad3nce said:
Just rip the boot.img from Fresh 2.1OC, then implement it into regaws build.
It's actually a lot easier than it sounds.
Click to expand...
Click to collapse
I work from my phone, i just hopped on fresh. Loving it so far
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
yay. will report back on battery life after some use. i think i need to donate to u now. god ive been stingy lately
Edit: do u have a paypal???
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
You're the stuff!
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
Do you have BLN integrated into your kernels?
birgertime said:
Do you have BLN integrated into your kernels?
Click to expand...
Click to collapse
Yes, BLN is available in both of them.
jumaaneface said:
yay. will report back on battery life after some use. i think i need to donate to u now. god ive been stingy lately
Edit: do u have a paypal???
Click to expand...
Click to collapse
I added the donate thing to xda. Thanks for asking.
Can this be flashed over voodoo?
Sent from my SGH-T959
Internal memory not mounting...
The internal memory is not mounting at all. It is not mounted by the phone or by the PC.
Seems like a good idea. Flashing now.
This kernel is injected with voodoo, correct?
Sent from my SGH-T959 using Tapatalk
After I flashed this I soft bricked and could not get back into cwm but I used odin flashable voodoo kernel and everything was fine I'm going to try this again
I used the Dragon kernel from the i9000 source. The OC version never worked, but the non-OC version worked extremely well.
Same issue it appears with the 959d source. i don't have issues with other OC kernels...any ideas why this would be happening?
Dan_Brutal said:
This kernel is injected with voodoo, correct?
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Yes, voodoo is enabled.
ttabbal said:
Yes, BLN is available in both of them.
Click to expand...
Click to collapse
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Everything working great here. Brillliant work! Thanks for the effort. Oc'ed and voodoo'd...w/nero 4.1
A reminder to noobs, flash with recovery in power menu options.
Sent from my SGH-T959 using XDA App
MTC44 said:
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Click to expand...
Click to collapse
You should have a BLN Settings app installed with the kernel.. use that.
MTC44 said:
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Click to expand...
Click to collapse
You need to run the BLN control app. It was supposed to be installed with the kernel. Just open the app and "Activate BLN". If the app wasn't installed for you, you can download it here.
U need a app
MTC44 said:
I used the Dragon kernel from the i9000 source. The OC version never worked, but the non-OC version worked extremely well.
Same issue it appears with the 959d source. i don't have issues with other OC kernels...any ideas why this would be happening?
Click to expand...
Click to collapse
It's probably the type of OC, they aren't all the same. If you have an OC mod that works good for you, and you want to see it in my kernel or any other, you need to get that dev to release the source. Some don't, and I can't reproduce what they do if I don't have the code. This OC is based on a patch from the i9000 forums, it works, but is less universal than some of the others on Vibrant hardware.
For the record, my source is posted here: https://github.com/travistabbal
I'm uploading the source for the 959d kernels now.
Great work
I think u actully did it with this one, the battery seems to be way better then the last 2.7 kernel. Im running oc and voodo
I downloaded mik kernel from his git repo and I patched it to add BFS Scheduler (0.404 patch works very well) and to set smartass governor to default.
I use it on CM7 Beta 6.5.2 and it works!
DOWNLOAD: http://www.multiupload.com/917W030Y00
EDIT: ZIP file is unsigned!
What is BFS scheduler used for and how does that help CM7 6.5.2 apart from setting default governor, Waiting for the patch, Thanks.
bfs - performance wise
cfs - multi tasking wise
i hope tun.ko from mik' s rom can be on this kernel since the tun.ko on mik's,rom is not updated, openvpn is not working, and i need it badly
Sent from my LG-P500 using Tapatalk
I didn't used BFS because of strange perfomance issues in GB. If this one is ok I maybe try to use it.
About tun.ko: in 6.5.2 it has been built directly in kernel, but I don't have openvpn to test it.
mik_os said:
I didn't used BFS because if strange perdomance issues in GB. If this one is ok I maybe try to use it.
Click to expand...
Click to collapse
Yeah there was an issue with dynticks and low CONFIG_HZ (phones were affected since they shouldn't really go above 100); it should have been fixed in bfs 404 I've been using it since your 6.5.2 release and no issues have arose (and no groundbreaking performance improvements either).
@cmangalos: actually, CFS is the default kernel scheduler, and is therefore supposed to be very scalable (i.e. works well enough on machines ranging from 1 to thousands of (logical) cpus), while BFS uses a different approach which privileges user interaction and minimizes latency (hence *theorically* improving system responsiveness), at the cost of lower throughput.
for anyone interesting here's an enlightening read: http://www.cs.unm.edu/~eschulte/data/bfs-v-cfs_groves-knockel-schulte.pdf
A.
Indeed! I've tried with higher CONFIG_HZ but nothing good came off it, but in my desktop HZ as 1000 is a good boost.
mik_os said:
I didn't used BFS because if strange perdomance issues in GB. If this one is ok I maybe try to use it.
About tun.ko: in 6.5.2 it has been built directly in kernel, but I don't have openvpn to test it.
Click to expand...
Click to collapse
With 0.404 there aren't bugs... if you want, you can release a new version with CFS and a version with BFS... or maybe you can release flash zip kernel! Or maybe i can do it for you!
mik_os said:
I didn't used BFS because if strange perdomance issues in GB. If this one is ok I maybe try to use it.
About tun.ko: in 6.5.2 it has been built directly in kernel, but I don't have openvpn to test it.
Click to expand...
Click to collapse
im always using openvpn, and when i started to use cm7 roms, tun.kos are always not compatible with the kernel, if you want mik, i can give you servers, username and pw, and use openvpn setting app found in market
Sent from my LG-P500 using Tapatalk
DookMatt said:
I downloaded mik kernel from his git repo and I patched it to add BFS Scheduler (0.404 patch works very well) and to set smartass governor to default.
I use it on CM7 Beta 6.5.2 and it works!
DOWNLOAD: http://www.multiupload.com/917W030Y00
EDIT: ZIP file is unsigned!
Click to expand...
Click to collapse
if its unsigned, do i need to sign it before flashing?
if yes, how?
dongimin2 said:
if its unsigned, do i need to sign it before flashing?
if yes, how?
Click to expand...
Click to collapse
no you dont need to. but you will have to uncheck the option "toggle verify signature" in the recovery. thats all
Works great can't test wifi right now but everything else works, good benchmark scores (not very high Oc 245/768 performance kp beyond that ). Testing it further.
Sent from my LG-P500 using XDA Premium App
Do I have to wipe something before flashing?
kovidd said:
Do I have to wipe something before flashing?
Click to expand...
Click to collapse
Not necessary .. but you can wipe dalvic cache.
Sent from my LG-P500 using XDA Premium App
i wonder if its working with open optimus rom v1.148?????????
gkalenis said:
i wonder if its working with open optimus rom v1.148?????????
Click to expand...
Click to collapse
before you wonder, read some posts/threads about the optimus series and kernel variants
Even though BFS has nice loading times and boot times , it sucks in video playback . Just tested it and it shocked me at how many times it would stutter
Zerobarat1 said:
Even though BFS has nice loading times and boot times , it sucks in video playback . Just tested it and it shocked me at how many times it would stutter
Click to expand...
Click to collapse
stutter must not be come with the bfs ... it can have more reasons i think.
Zerobarat1 said:
Even though BFS has nice loading times and boot times , it sucks in video playback . Just tested it and it shocked me at how many times it would stutter
Click to expand...
Click to collapse
I don't get any stutter its all butter smooth. Will test further though.
Sent from my LG-P500 using XDA Premium App
@DookMatt, is it possible to create a kernel that enable blink like void?
heiszakee said:
@DookMatt, is it possible to create a kernel that enable blink like void?
Click to expand...
Click to collapse
blink is an app. "Missed message flasher free"
Hi guys, Decided to make a new thread as since you guys asked for it
The kernel is based off the work of Arco, forfivo and castanaIT.
Id like to also note please use extra caution when useing extreme edition kernels. (the overvolt).
For those of you that decide you dont want this kernel you can use this to restore back to core2's 11-09 2.6.35 kernel without doing a full rom flash.
When using either kernel 1.7ghz is most likely gonna be the highest you want to run on. @1.8 we either become unstable or get too much heat.
This part im just going to relink the old build for my first attempts. They mostly didnt work.(just for archiveing purposes)
Beta v1, Beta v2, Beta v3, Beta v4
In this section ill list the newer builds and what they added.
Beta 5.2
Adds Govs: brazilianwax, intellidemand, interactivex, lagfree, lazy, lionheart,
lulzactive, ondemandx, savagedzen, scary, smartass1/2, smoothass, wheatley
Adds OC up to 1.8( 1.8 only stable in OV edition but still included just because)
Beta v5.2 + Overvolt v2
Adds the same as above but uses more volts for the higher frequencies to try and make them more stable.
(Was later reported that its stable but gets pretty Hot)
Adds same as above but lowers the volts a little to try and find a happy spot between stable and temps.
Source- http://github.com/doadin
_____________________________________________________________________________________________
Overall Feature list:
Govs:
brazilianwax
intellidemand
interactivex
lagfree
lazy
lionheart
lulzactive
ondemandx
savagedzen
scary
smartass2
smoothass
wheatley
BFS (Brain **** Scheduler)
______________________________________________________________________________________________________________________
reserved
Things from users
Note: i do not suppport nor will i trouble shoot things for users of anything listed here.
Apps found useful by other users of this kernel:
link to the tweaking app
This is the greatest kernel ever, use it! I promis you wont be disappointed!
I love it, however beta 5 broke wifi for me, but it doesnt for some, so please try it!
Added a link to the wiki http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G#Custom_Kernels
Beta5 is what broke wifi for me as well
-sent from outerspace
Running the latest CM9 stable with Beta 5 kernel OC to 1.4GHz everything working here. (WiFi, camera, video, everything)
Can't wait for the next CM9 stable with the additional camera fixes. Combined with this kernel will be great!
Sent from my SGH-T679 using xda app-developers app
Look forward to testing this
It's nice to see more development! 2 overclockable kernels in less than a week, after a year of nothing like this Keep up the great work, guys!
Just wanted to chime in to say I just flashed CM9 (stable 11-09), then flashed gapps, and the beta 5 kernel - all within the same CWM session. My Wifi is working just fine. Fast and stable so far Lovin' it! Great job. I especially love all the various governors - that'll give me a lot to play with today
Hey guys, im working on makeing beta 6. When i tested the build wifi didnt work, however i havent changed anything with the wifi so if anyone whos willing to do wipes and stuff possibly try this build? http://d-h.st/ouL
I would do the wipes and stuff my self but this is my only phone/daily used device. So wipeing isnt exatly something id like to do. I did try wipeing cache/fix permissions but that didnt work. Id guess it would work with wipes cause all the wifi code is untouched from beta 5, but before i go telling people to wipe id like to know if that works. Some people said beta 5 broke wifi too which i guess is possible as with this beta 6. However i believe it to be due to not wipeing not the kernel it self.
I clean installed 9/28 plus gapps and this but it broke wifi and usb connection. I chose smartassv2 plus 368 min and 1.4 max and it immediately froze. Am gonna download the latest stable and do this again.
Mwas. said:
I clean installed 9/28 plus gapps and this but it broke wifi and usb connection. I chose smartassv2 plus 368 min and 1.4 max and it immediately froze. Am gonna download the latest stable and do this again.
Click to expand...
Click to collapse
I figured out what kept breaking wifi, it was a noob mistake by me. Fixing it and uploading new builds now.
Edit: Beta 6.3 released, Overvolt edition comeing soon.
cars1189 said:
I figured out what kept breaking wifi, it was a noob mistake by me. Fixing it and uploading new builds now.
Edit: Beta 6.3 released, Overvolt edition comeing soon.
Click to expand...
Click to collapse
Can I flash this over without rom wipe?
Mwas. said:
Can I flash this over without rom wipe?
Click to expand...
Click to collapse
Yes, but it's usually a good idea to wipe cache+dalvik.
Just flashed and booting up now.
Btw, absolutely loving the Lulzactive governor. Maybe you should update the OP with a link to the tweaking app
Bloodflame said:
Yes, but it's usually a good idea to wipe cache+dalvik.
Just flashed and booting up now.
Btw, absolutely loving the Lulzactive governor. Maybe you should update the OP with a link to the tweaking app
Click to expand...
Click to collapse
All future builds should work fine without a rom wipe or cache/dalvik as of right now.(beta6)
Sure ill add it to my second/reserved post for now.
Also gonna update the OP with links to 5.1 which is an updated beta5 that shouldnt break wifi.
Beta 6.3 overvolt edition is out now too.
I wiped davlik/cache and flashed beta 6.3. Now wifi works and my previous issue with usb was due to a faulty cable. Only problem now is the phone freezes when I set max to 1.4. 1.3 works fine so am guessing that's my sweet spot.
Mwas. said:
I wiped davlik/cache and flashed beta 6.3. Now wifi works and my previous issue with usb was due to a faulty cable. Only problem now is the phone freezes when I set max to 1.4. 1.3 works fine so am guessing that's my sweet spot.
Click to expand...
Click to collapse
Glade to here its fixed/figured out. sorry to hear 1.4 isnt working for you,I just ran a benchmark @1.4 and it ran fine, i believe this is where the every hardware is different.
Just re-read your previous post and saw you used smartass gov. Thats the same one i used. You may wana play with some other govs it may or may not effect the frequency you can use. It probably wont and smartass is a good gov.(imo) but just a thought.
cars1189 said:
Glade to here its fixed/figured out. sorry to hear 1.4 isnt working for you,I just ran a benchmark @1.4 and it ran fine, i believe this is where the every hardware is different.
Just re-read your previous post and saw you used smartass gov. Thats the same one i used
Click to expand...
Click to collapse
Yea I used smartass. btw is there a difference in 6.3 and 5.1 and should I flash 5.1 since I used 6.3?
Mwas. said:
Yea I used smartass. btw is there a difference in 6.3 and 5.1 and should I flash 5.1 since I used 6.3?
Click to expand...
Click to collapse
As stated in the OP 6.3 Adds:
GPU frequency changing
Added V(r) and SIO schedulers
You can use whatever version you want. 5.1 fixes wifi for people who had problems with beta 5. So any of the 5.1 - 6.3 builds are ok to use its just what you want out of the kernel. Each build is a new kernel you can flash w.e. you want and doesnt have to go in any order. Builds older than 5.1 are not recommened to use but they are basicly unchanged from the Kernel you get in core2idiots latest cm9.
Mwas. said:
Yea I used smartass. btw is there a difference in 6.3 and 5.1 and should I flash 5.1 since I used 6.3?
Click to expand...
Click to collapse
6.3 just fixes wifi and adds a couple I/O schedulers. You might as well just stay with it. Even if you don't use the schedulers, there's no harm in staying where you are.
Also, just wanted to say that SmartassV2 will save more battery when the screen is off, as compared to basic Smartass.
As far as your issue at 1.4, that bites! Mine tops out at 1.7 without any voltage adjustment. Most people should be able to get 1.6-1.7 as well. The best chips should get 1.8... That said, 1.3 seems pretty low for you to top out with. In any case, it's usually a good idea to go at least 1 step below where you don't freeze or reboot, just to be safe... In your case, that would be 1.2 - just putting it out there. In my case, even though 1.7 works, I have it set to 1.5 just to make sure I'm not running into problems.
I made this kernel for my own use.
Decided to share it.
My reason for making this kernel is because I have been trying kernel after kernel and have not been able to stay on a single one.
Every time my main issue was that the phone would get uncomfortably hot, the only kernel that wouldn't was always @showp1984's kernel with his 3-phase thermal. At first I was enjoying it until I saw all these other kernels getting updated with new features so I decided to update showps kernel, it wasn't a big update but it still suffered from the SODs caused by his in-kernel mpdecision (which I'd prefer over Qualcomm's) so I decided to just grab my next favorite kernel and update it with thermal. I've been testing it for a few days and haven't had it get as hot as it used to so I'm happy with it. I'm not a developer I just wanted something for me. It has the same features as @Faux123's kernel which include...
-Dynamic FSync
-Eco Mode
-Turn MPDecision on/off
-OC up to 1.8GHz
-UV to 700000mV
-Sweep2Wake
-Fast Charge
-Veno/Reno/Bic/Cubic/Westwood+/HTCP
-GPU OC up to 487MHz
-3 phase thermal
-FIOPS/NOOP/DEADLINE/ROW/CFQ/SIO schedulers
-compiled with the latest Linaro toolchain O2 optimized
-its also hard coded with moles' colors that everyone is raving about (they are good though thats why i included them)
I personally like using Kernel Tuner which allows modifying the 3 phase thermal parameters.
Hope you guys enjoy it.
New release method:
Each release will have a folder, in the folder will be a kernel with hardcoded values from Molesarecoming. I'll just use the most popular few because id rather not wait a few mins uploading each kernel from my phone :l
February 8, 2013
http://www.mediafire.com/?3t5vz8t21m2wl
About the source:
It took me a few hours to download each repository (faux123 and showp) since im tethering off my phone (which is faster to download than upload with TMo speeds) , so i haven't uploaded the source. I can probably upload the patches (a lot smaller in size) which can be applied to Fauxs source thus producing this same kernel
Glad i was trying my hand at git, still such a noob but i was able to figure something out. Sorry if it isn't proper :l
https://github.com/jassycliq/mako
so this is based on faux's kernel?
Yes, it is up to date with his github source.
and i'm assuming BLUEHOLO color tweak?
What do you mean? I posted everything that I included, nothing more nothing less
jassycliq said:
What do you mean? I posted everything that I included, nothing more nothing less
Click to expand...
Click to collapse
He's talking about PA color... lol That's what everyone is talking about lately...
Did you replace the mpdecision ? i didn't quite understand the op
meangreenie said:
Did you replace the mpdecision ? i didn't quite understand the op
Click to expand...
Click to collapse
No, I previously had compiled a kernel that replaced Qualcomm's proprietary mpdecision with showps in-kernel mpdecision but it would cause SODs so i decided against it.
It still uses Qualcomms mpdecision but just like Faux123's kernel you can turn it off and use intelli_plug.
jarjar124 said:
He's talking about PA color... lol That's what everyone is talking about lately...
Click to expand...
Click to collapse
yes, its in OP.
jassycliq said:
yes, its in OP.
Click to expand...
Click to collapse
molesarecoming color tweak has different revisions, his latest release is called BLUEHOLO. I didnt know which one you implemented.
Sent from my Blenzderz 9000
---------- Post added at 07:54 PM ---------- Previous post was at 07:52 PM ----------
scratch that.. latest one is now 4th rev halfbreed
Can you link me? I had recently checked in their github and didn't see anything new.
jassycliq said:
Can you link me? I had recently checked in their github and didn't see anything new.
Click to expand...
Click to collapse
Link
Updated
reboot, reboot, reboot, reboot and more with the update. I have AOKP Official
AW: [Kernel]FrankenKernel
You need to flash the rest kernel from faux( you find it in faux thread opener) than Franken Kernel, this will work for me.
Nexus 4 Tapatalk
Wow. This kernel is packed with features. I just flashed it now. I'll report back with battery in a day. Nice job!
Sent from my Nexus 4 using xda premium
will test and report back
what settings do you recommend ? any governor over the others ?
CheesyNutz said:
will test and report back
what settings do you recommend ? any governor over the others ?
Click to expand...
Click to collapse
I like ondemand and intellidemand governors. I/O I like is sio. I would also recommend UC'ing to 1113MHz.
Sent from my Nexus 4 using xda premium
android88 said:
I like ondemand and intellidemand governors. I/O I like is sio. I would also recommend UC'ing to 113MHz.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
thanks im still new to the quadcore .... do i set all cores to the same gov ? or what