Database Develop

[HELP]GPRS/EDGE/3G not enabled in Cyanogenmod

guys i just flashed CM7 rom but im not able 2 get GPRS/EDGE/3G in my phone
Does ne bdy hav d same problem

killerxswagat said:
guys i just flashed CM7 rom but im not able 2 get GPRS/EDGE/3G in my phone
Does ne bdy hav d same problem
Click to expand...
Click to collapse
Please post at the CM7 thread , thankyou

killerxswagat said:
guys i just flashed CM7 rom but im not able 2 get GPRS/EDGE/3G in my phone
Does ne bdy hav d same problem
Click to expand...
Click to collapse
You need to create and set your operators APN settings under mobile networks in settings.
BTW ask your questions in general forum not here.

you probably don't have APN configured

lolowaty said:
you probably don't have APN configured
Click to expand...
Click to collapse
I use setting my APN .. n doesn't not working man... please help

If something isn't working I suggest to flash rom once again.
wipe data/cache factory reset.
Or check once again APN configuration..

CM7 "should" already have all APN Configs.
You can also download config file from here and put it into /system/etc.

yudhaz said:
I use setting my APN .. n doesn't not working man... please help
Click to expand...
Click to collapse
Did you put "internet" as the APN type?? If so keep the APN type field blank and try again..

Solution
Hi Bro this is very common problem... due to the fact you are flashing your cellphone with rom that maybe is from europe, you will need to get the modem from your country and flash the modem trough "ODIN" ,it works for me so eveytime i Use a rom from any developer from any country i just flash the modem with odin and wuala start working the 3g and hdsp+ connection do a little bit of search i will try to upload the files if you need help with that.... Do a little bit of search and this only flash the modem so it will not change any settings on your phone...

PabloPL said:
CM7 "should" already have all APN Configs.
You can also download config file from here and put it into /system/etc.
Click to expand...
Click to collapse
Not all APNs are included there and CM/Android is a worldwide available product, for example my APN is not there and having that bunch of useless APNs wouldn't help in any way, what I do agree is that a simple pop up at the beginning reminding users that they need to set up their APN manually would help avoid these kind of questions to continuously pop up all over the internet.

[Q] week network signal

Hi , i have Samsung galaxy s captivate i897 , after hard reset for the mobile
(power button + up/down key) , the phone is reset and every thing is right !! at that night , next day , i figured that the network signal is very low and can't speak or here others clearly , any help with this->Issue what is wrong ?!!!!

What is ur info under "About Phone" ??
U may have to flash a different modem...
Sent by XDA Premium App

that is the status
Status of Mobile
phone number (unknown)
network (unknown)
network type (HSDPA)
Service State (out of service )

Try and reset ur APN to default.
Sent by XDA Premium App

mody_yousef91 said:
Status of Mobile
phone number (unknown)
network (unknown)
network type (HSDPA)
Service State (out of service )
Click to expand...
Click to collapse
You can try flashing a stock rom under the stock roms thread under Android development section
Sent from my SGH-I897 using XDA

4-2ndtwin said:
Try and reset ur APN to default.
Click to expand...
Click to collapse
how to do this ?

mody_yousef91 said:
how to do this ?
Click to expand...
Click to collapse
Copy somebody else's setting or flash a stock ROM
Sent from my CM9 ICS i897 Captivate

mody_yousef91 said:
how to do this ?
Click to expand...
Click to collapse
Go to Settings/ Wireless and network/ Mobile networks/ Access Point Names/ then Menu button and then select "Reset to default".
Sent by XDA Premium App

4-2ndtwin said:
Go to Settings/ Wireless and network/ Mobile networks/ Access Point Names/ then Menu button and then select "Reset to default".
Sent by XDA Premium App
Click to expand...
Click to collapse
didn't work + configured my network form provider didn't work either !!!

patrick8996 said:
You can try flashing a stock rom under the stock roms thread under Android development section
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
You mean this ?
http://forum.xda-developers.com/showthread.php?t=1300843
Did not find mine "i897UCKK4" !!

thanks guys for trials , i appreciate
but i remembered something may help you in helping me my mobile was bought
from
at&t then i traveled to another county doesn't support at&t network , so i have
had to unlock this mobile to the new notwork and then i choose to unlock to (Any
network) , my bro had the same mobile i tried to but other SimCard different form
his own and didn't work too !! and he was unlocking to any network too !!!
does this relate to my problem ?
i want to clarify that the network is UN stable sometimes works and other no !!

Sounds like the network that u r connecting to may have one frequency that the captivate can use and so sometimes u get a signal and sometimes not.
This is what happens if u try to use the captivate on t mobile---u can only get the edge.
U need to look at that networks frequencies and see if that is the case as far as what the captivate is designed to work on.
Sent by XDA Premium App

You should look into flashing a custom rom, with a custom modem. I have serendipity 7 flashed on mine, and I get full bars where ever I go. I am also on att though. Serendipity 7 comes with its own custom bootloaders, kernel, and modem i believe too. I get very good service, and data connection (HSDPA). I think it's hsdpa, whatever the "H" means.
Sent from my Serendipity VII flashed Captivate using xda premium

Just wondering..
Out of curiosity, Limitz, when you're getting those full bars of yours, what signal strength are you getting under 'About Phone'? Been thinking of switching to a new modem (I9000UGKG3, Slim ICS 3.4, Semaphore 1.0.0) but it's hard to know what's normal without a frame of reference.

mody_yousef91 said:
...my mobile was bought from at&t then i traveled to another county doesn't support at&t network...
Click to expand...
Click to collapse
I'm running an AT&T captivate in Malaysia running on the Maxis network GSM/WCDMA. You just need to make sure you have the right things installed.
Under your Settings>About Phone, what do you have listed for the following sections:
- Android Version
- Baseband version
- Kernel Version

whisky23 said:
Under your Settings>About Phone, what do you have listed for the following sections:
- Android Version
- Baseband version
- Kernel Version
Click to expand...
Click to collapse
Firmware version : 2.3.5
Baseband version : I897UCKK4
Kernel version : 2.6.35.7-I897UCKK4-CL614489
Build number : GINGERBREAD.UCKK4

Limitz Cash said:
You should look into flashing a custom rom, with a custom modem. I have serendipity 7 flashed on mine, and I get full bars where ever I go. I am also on att though. Serendipity 7 comes with its own custom bootloaders, kernel, and modem i believe too. I get very good service, and data connection (HSDPA). I think it's hsdpa, whatever the "H" means.
Click to expand...
Click to collapse
if i did that custom ROM flashing for my modem !!! it does not relate to which network i am using ? when ever i install it will work ?
sorry i have a question you mean by " ROM flashing"
a driver for my modem because of the hard reset i have done ?

^ OP,
Who is ur Cell Provider, since it is not at&t ??
And do u know what network frequencies they use ?
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] 3g not workng

hey my 3g is not working on ace s5830...
can anyone help??

siddharthbball said:
hey my 3g is not working on ace s5830...
can anyone help??
Click to expand...
Click to collapse
Yes i can tell me you are on stock or cm7. have you tried apn to work it correctly

free2choose said:
Yes i can tell me you are on stock or cm7. have you tried apn to work it correctly
Click to expand...
Click to collapse
yes i have tried apn ..i m on cm7
2g is workng ..as soon as i turn wcdm on singnal goes off

APN problem??

JBMe94 said:
APN problem??
Click to expand...
Click to collapse
apn iif fine but 3g doesnt work
2g is working fine

siddharthbball said:
apn iif fine but 3g doesnt work
2g is working fine
Click to expand...
Click to collapse
I have a same problem...How can I fix it,I don't know ...
APN settings are exactly true because 2g is working.
3g cut when I made root
Please help... (but your helps must be in root way) :laugh:

How to get 4G on ATT

My Mi Mix is on ATT and is running on 3G . How can I get the 4G that ATT uses in USA ???
Thanks

Just change apn to att nxtgenphone and change radio to lte/wcdma my never lost lte.

Abdiel1224 said:
Just change apn to att nxtgenphone and change radio to lte/wcdma my never lost lte.
Click to expand...
Click to collapse
If you can explain what you mentioned in lay language , I'll buy you a jar of coffee.

mskup1 said:
If you can explain what you mentioned in lay language , I'll buy you a jar of coffee.
Click to expand...
Click to collapse
Which rom do u have? Aosp or miui?

Abdiel1224 said:
Which rom do u have? Aosp or miui?
Click to expand...
Click to collapse
I think I have miui . Original from China .

mskup1 said:
I think I have miui . Original from China .
Click to expand...
Click to collapse
Ok go to settings and look for mobile network or sim cards. If founded go to the option that said access point name click that. It should said att nextgenphone if not look for it and press it.

Abdiel1224 said:
Ok go to settings and look for mobile network or sim cards. If founded go to the option that said access point name click that. It should said att nextgenphone if not look for it and press it.
Click to expand...
Click to collapse
Thanks !

Does it worked?

Abdiel1224 said:
Does it worked?
Click to expand...
Click to collapse
It Worked . Thanks a lot .

I upgraded to version MIUI 8.5.2 and now get in About Phone - Status - Sim Status :
For Cellular network type : HSPA : I need for GSM another one , but it greyed out and for cellular network state : Disconnected : Greyed out .
Help !!!

[solved]mobile data communication NOT avilable

xiaomi.eu_multi_MI9_9.4.26_v10-9.zip
ROS-MIUI_MI9_9.5.1_v10-9.zip
xiaomi.eu_multi_MI9_9.4.26_v10-9.zip
Mobile data communication is not available in either ROM.
flushed them with TWRP.
Only available in cepheus_global_images_V10.2.6.0.PFAMIX_20190327.0000.00_global
flashed with flash_all.bat.
How can I solve this problem?

Kaeru Sapporo said:
xiaomi.eu_multi_MI9_9.4.26_v10-9.zip
ROS-MIUI_MI9_9.5.1_v10-9.zip
xiaomi.eu_multi_MI9_9.4.26_v10-9.zip
Mobile data communication is not available in either ROM.
flushed them with TWRP.
Only available in cepheus_global_images_V10.2.6.0.PFAMIX_20190327.0000.00_global
flashed with flash_all.bat.
How can I solve this problem?
Click to expand...
Click to collapse
Have been having the same issue for my 4G data only sim.... But 2G, 3G seems to work.....! Have not find any solution yet....!

Addymore said:
Have been having the same issue for my 4G data only sim.... But 2G, 3G seems to work.....! Have not find any solution yet....!
Click to expand...
Click to collapse
Thank you for your reply
In places where 4G signal is weak, that method seems to be useful.
but in my place 4G signal is strong.
And in the case of ROM flashed by FAST BOOT, the problem does not occur.

What twrp r u using?

Did you remove all SIM and lockscreen codes before you installed those 'custom' / non-stock ROMs ?

derKoder said:
What twrp r u using?
Click to expand...
Click to collapse
Mi9-twrp-3.3.0-b8-cepheus-wzsx150.img
thank you.

SKiLLa XP said:
Did you remove all SIM and lockscreen codes before you installed those 'custom' / non-stock ROMs ?
Click to expand...
Click to collapse
already solved.
thank you.

The cause was the lack of APN type setting.
It solved by inputting "default, supl, dun" to APN type..
Thank you so much Powell:laugh: