This is "999Switch".
It's like an init.d process. Competible recently with ext4 filesystems.
Changelogs:
+Fixed Various reported bugs
+Now supported ext3 too
+Now BFQ as default scheduler setted in bpp file
+Fixed wifi bug and ringtone bug
+Misc. Tweaks regarding TCP/IP -Network settings
+Tweaks regarding vm and heapsize Based on ch33kybutt's concept : http://forum.samdroid.net/f53/ch33kymod-ckmod-kernels-tweaks-cm-3343/ & Voku's process : http://forum.samdroid.net/f53/dev-ssswitch-auto-switch-settings-4607/ Credits to ch33kybutt and Voku1989 from my previous phone's forum
+Auto-e2fsck file system check for /data and /cache partition
+Disabling various LG services, running in backgrounds and proximity delay during call, for this credits to this guy knzo: http://forum.xda-developers.com/showthread.php?t=1227269
+Optimized for locking several apps, by changing OOM values and renice values.
+BPP(Bits-Per-Pixel) on-the-fly support
+No boot-animation, Disabled boot-animation
More to come soon!
Downloads:
http://www.multiupload.com/6707LVLPFX
Installation:
-Reboot in-to-Recovery
-Nandroid backup
-Install 999switch
-Reboot
-Due to disabled boot animation it stays longer at lg processing screen.
Competibility:
+Any kernel/Rom with ext4/ext3 for LG Optimus 2x
THX a lot for your work I will test
...it is also compatible with ext3?
Craxx said:
THX a lot for your work I will test
...it is also compatible with ext3?
Click to expand...
Click to collapse
May be dint check:/
...so i can extract script and rename to 999switch.sh and start for testing with ext3 (I have BlazingDragon) before putting in init.d?
Craxx said:
...so i can extract script and rename to 999switch.sh and start for testing with ext3 (I have BlazingDragon) before putting in init.d?
Click to expand...
Click to collapse
No need to rename if you dont want to install through recovery than copy both files BPP and 999Switch after extracting 999switch through ES FileExplorer and paste it in /system/etc/init.d then change permissions of both to rwx-rx-rx and reboot
but so it is starting every boot...and if something is going wrong....it is crashing perhaps...so i would test before ONLY starting the script (not in init.d folder), but i think with the needet bpp file testing is not working...??
this can work with supercharger script already installed?
thx
....oh i see both are scripts so i can test both bpp after 999switch...right?
Craxx said:
....oh i see both are scripts so i can test both bpp after 999switch...right?
Click to expand...
Click to collapse
hi craxx
fuer was ist das eigentlich gut? ich hab ja den supercharger schon drauf bei mir...gruss
Craxx said:
....oh i see both are scripts so i can test both bpp after 999switch...right?
Click to expand...
Click to collapse
Yes Both are different scripts
vivmar said:
this can work with supercharger script already installed?
thx
Click to expand...
Click to collapse
YEs both has different functionality
Hy bir
Bin mit kids gerade daussen und teste später .... spica meinte ist anders als supercharger...schau einfach mal ins script...
Craxx
Send from my 2x with Tapatalk
spica123
Im a bit confused...im using supercharger and it works fine...what is the different with supercharger and this one...do you recommend flashing it over sr1 and what does it exactly?
ty
Its unrelated to supercharger it doesnt work on low memory killer alike supercharger. Try it if you like it then keep it its not must to install
Sent from my LG-P990 using Tapatalk
i'm having "insufficient space" problem on market after installing this via CWM..
When i run HP with bpp16 the bpp script is not neccessary?
Craxx
Send from my 2x with Tapatalk
spica1234 said:
Its unrelated to supercharger it doesnt work on low memory killer alike supercharger. Try it if you like it then keep it its not must to install
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
i know but what is the advantage disadvantage with this scrip?
@Ehmjay
Try reboot...
Craxx
Send from my 2x with Tapatalk
Its not related with market, try wiping cache and dalvik cache:/
ehmjay said:
i'm having "insufficient space" problem on market after installing this via CWM..
Click to expand...
Click to collapse
Sent from my LG-P990 using Tapatalk
is it worth a try on CM ?
Related
WARNING:THIS METHOD CAN BE DANGEROUS. DONT DO ANYTHING IF YOU DO NOT KNOW WHAT YOU DO.I AM NOT RESPONSIBLE IF YOU TRANSFORM YOUR PHONE INTO A BRICK.
[NEW] HP PerformancePack V10 R ( Strongly recommended for v20Q stock rom users facing auto-wipe internal sd during every boot)
*DOESNT WIPE SYSTEM & DATA*
Compatibility:
Stock GB ROMs incl. V20 a/c/e/i/j/L/q/g
CHANGELOGS:
+(PP10R) Overally optimized for Quadrant Standard and advanced more smoothness and minox bug fixes (PP10R)
+(PP10) Compiled sqlite3 binary for DB mode WAL, now more performance more snappiness and never seen higher quadrants (especially I/O)
+(PP9) Removed switchlite and iosched files and added more fixes for battery
+Add init.d support to any stock ROM
+Delayed switch execution for smoother boot-up and smooth boot UI responsce
+EXT4 competibility
+Misc performance and battery life enhancing tweaks
+Fixed v20l ramdisk acting weird and wiping internal sd crazy when v20l sourced custom kernl is introduced)
+smooth scrolling back
+Might fix wifi on other ROMs
Installation:
-reboot to recovery
-nandroid backup
-install RC
-Install pp
IT DOESNT WIPE SYSTEM AND DATA BUT CACHE.
DOWNLOADS: HP PERFORMANCE PACK V10R
http://www.box.com/s/lqnp61xf1f7vasxqnz22
Old ChangelogsFeatures:
+FIXED Broken init.d support in V20L
+FIXED Added an init.d auto force file system check during boot to prevent data loss
+Faster Read/Write and Overall UI responce in compare to EXt3
+Faster Boot (Thanks to Trym Hanson)
+Less micro-lags in APP responce
+Disabled some PCSYNC and OSPD daemon related services in init.rc of RAMDISK
+Many services and optimiaatons in init.rc
+Faster scroll
+Featuring HP RC8-Recompiled Kernel Version inbuilt
Competibility:
+Tested only on V20L but ideally It should work with Other ROMs with EXT3
+Recently only withHP Krnls
Caution Before Installation:
*You must be on STOCK/Leaked ROM with EXT3/4 like V20L,Blazing Dragon Amoon ROM ext.
*Recently It works only With HP with EXT2 Supported Kernel
Installation Procedure:
+You must be on STOCK/Leaked ROM with EXT3 like V20L,Blazing Dragon Amoon ROM ext.
+Reboot in to recovery
+Do a Nandroid BackUP
+Install HP Performance Pack
+Install HP RC10/9 or any of HP kernels only
+Reboot
Older Downloads:
DOWNLOADS: HP PERFORMANCE PACK V9 Lite
http://www.multiupload.com/RVU0USCAOW
Credits:
Trym Hanson for faster boot support, Topogigi
Reserved for future use
Frag, I just converted to ext4.
Any way to go back to ext3 without flashing rom new?
spica1234 said:
FAQ:
Q: What's it now?
A: Never satisfied with an EXT3? This is in real mean a performance booster pack for STOCK ROM with EXT3 support, It doesnt work with EXT4.
*You must be on STOCK/Leaked ROM with EXT4 like V20L,Blazing Dragon Amoon ROM ext.
Click to expand...
Click to collapse
So which part is the correct one?
Dzhedaj said:
So which part is the correct one?
Click to expand...
Click to collapse
Corrected, Re-Read, Thank you
Hy spica1234 is it possible to integrate an init.d Support for Stock V20L?
Craxx said:
Hy spica1234 is it possible to integrate an init.d Support for Stock V20L?
Click to expand...
Click to collapse
I've succeeded with Rebuild Version of V20L of hell_97
Yes i know that was the first 20L Rom i testet and works. But to solve the FD-Bug i flashed the KDZ File (but FD-Bug still exist!!) and now i am on original Stock ROM without init.d support. So is it possible to integrate in this version?
take a look here for init.d support
http://forum.xda-developers.com/showpost.php?p=16310539&postcount=32
ilos said:
take a look here for init.d support
http://forum.xda-developers.com/showpost.php?p=16310539&postcount=32
Click to expand...
Click to collapse
I follow that method only thanks
Download link updated
Sent from my LG-P990 using Tapatalk
only /system and /data converted to ext2, /cache remain ext3 as per my screenshoot
( nothing wiped before and after applying this pack )
RC8 Kernel is included
Yes it doesnt wipe anything wait let me check about cache issue
ilos said:
only /system and /data converted to ext2, /cache remain ext3 as per my screenshoot
Edit: try to reapply
( nothing wiped before and after applying this pack )
Click to expand...
Click to collapse
Sent from my LG-P990 using Tapatalk
Yes you are right fixing
Sent from my LG-P990 using Tapatalk
Here you go with fixed version
http://db.tt/ACeoEpT2
Sent from my LG-P990 using Tapatalk
perfect now
And performance and smoothness?
ilos said:
perfect now
Click to expand...
Click to collapse
Sent from my LG-P990 using Tapatalk
very responsive and smooth
scrolling really smooth too !
spica1234 said:
Here you go with fixed version
http://db.tt/ACeoEpT2
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
So has the main post been update with this now?
Thanks.
Yes
spences10 said:
So has the main post been update with this now?
Thanks.
Click to expand...
Click to collapse
Sent from my LG-P990 using Tapatalk
a lot of people write me now after writing thats very easy to port how it works... (my english sry)
here a copy guide : works perfekt ... happy porting
PORTING
Download LeWa OS base ROM here- http://forum.xda-developers.com/showthread.php?t=1451850
Download thekraven's CM7 (you can try one of the ZVH basebands) i have use the cm from sub !
Open up both in an archive manager (7zip, winrar, etc.) i use android kitchen
Delete apps, framework, and media from the CM7 ROM ONLY
Replace these files with the one's from LeWa.
You will boot.. lol.
UPDATING
You will need to monitor the LeWa OS ROM carefully and look for updates
When an update comes out, simply download it and replace the framework, apps, and media folders just like the porting process. This will keep it up to date.
When an update comes out for a new CM7, simply download the new CM7, delete the apps, framework, and media folder and replace with LeWa ones.
Note that if an update for CM7 comes out and it has some edits to the framework, this will not have the same fix. But all the basic fixes; such as if MMS gets fixed, will work.
Happy porting
Thank You Friend
Will try it
What if we're using squad's os? there are necessary apk's for his port, instead of deleting all apks, can I just replace the files so that other apk's that shouldn't be touched will still remain?
Delete only 3 folders in cm7. App, framework and media, and now copy the 3 folder app, framework and media from the lewarom into ur cm 7. Thats done
Thanks
Thanks Friend I successfully ported JOY ROM to MINi but is need to resize the lockscreen
but you need resize a lots of png to fit ldpi screen.
I know. Any one wanna do this?
One question, is there anybody that can translate german into english? I have found a guide that shows how port miui to gingerbread .. mdpi and ldpi is possible say the guide. Thats what we need i think.
flatzki said:
One question, is there anybody that can translate german into english? I have found a guide that shows how port miui to gingerbread .. mdpi and ldpi is possible say the guide. Thats what we need i think.
Click to expand...
Click to collapse
How many is it to translate?? How many sites??
Sent from my GT-S5570 using xda premium
8 is a PDF... 20 o clock London time i upload it. I am at work
galaxy mini said:
How many is it to translate?? How many sites??
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Oh ich seh du bist deutsch. Wenn du nicht warten willst im deutschen miui forum ist die anleitung. Solltest sie nicht gefunden haben lade ich sie dir hoch...
no stress ;-)
flatzki said:
Oh ich seh du bist deutsch. Wenn du nicht warten willst im deutschen miui forum ist die anleitung. Solltest sie nicht gefunden haben lade ich sie dir hoch...
Click to expand...
Click to collapse
Iam to lazy to search, load it up and i will take a look on it but
i promise nothing ;-) cause iam a bit ill these days ;-(
ok here are the files :
1/2 http://www.mediafire.com/?ag5lo47e933rm52
2/2 http://www.mediafire.com/?8lfp4tgr6pjb133
gute Besserung dir
flatzki said:
ok here are the files :
1/2 http://www.mediafire.com/?ag5lo47e933rm52
2/2 http://www.mediafire.com/?8lfp4tgr6pjb133
gute Besserung dir
Click to expand...
Click to collapse
Thx will download and take look tomorrow!! Hope it will get better tomorrow !!
Danke hoffe morgen gehts mir schon besser, selten dass jemand hier deutsch schreibt habs schon fast verlernt ;-)) schaus mir morgen früh gleich mal an!!
Sent from my GT-S5570 using xda premium
Ok. I ported it and signed the zip. Flashed. Booted. Dint like the ROM so much. The icons look crappy. Cant check currency balance with no.'s like *123#. Most of it has CM7 apps. Its totally similar to CM7 only the user Interface is different.
The status bar looks cool and the memory killing apps are fine. Memory info (avail/total) 177MB/279 MB after killing. Btw ty for tutorial. Can you give the original link of the tutorial pls?
chemicalrage said:
Ok. I ported it and signed the zip. Flashed. Booted. Dint like the ROM so much. The icons look crappy. Cant check currency balance with no.'s like *123#. Most of it has CM7 apps. Its totally similar to CM7 only the user Interface is different.
The status bar looks cool and the memory killing apps are fine. Memory info (avail/total) 177MB/279 MB after killing. Btw ty for tutorial. Can you give the original link of the tutorial pls?
Click to expand...
Click to collapse
From lewo or miui
From lewo -
chemicalrage said:
From lewo -
Click to expand...
Click to collapse
http://pastebin.com/ZvV1Ghsw
would this work for porting lewa to another device?
chemicalrage said:
Ok. I ported it and signed the zip. Flashed. Booted. Dint like the ROM so much. The icons look crappy. Cant check currency balance with no.'s like *123#. Most of it has CM7 apps. Its totally similar to CM7 only the user Interface is different.
The status bar looks cool and the memory killing apps are fine. Memory info (avail/total) 177MB/279 MB after killing. Btw ty for tutorial. Can you give the original link of the tutorial pls?
Click to expand...
Click to collapse
@topic- after replacing those files. is it good to go for flashing?
Introduction:
Well,SlaidyBoost is a Script package By Me,Done After My experience With My old Scripts Released,It Contains New Features and Iprovements!!
Features and Improvements:
-RAM Manager,Less Lags,better Multitasking(LMK and MinFree Completly adapted For SGM)
-Automatic Zipalign(Zipalign xbin is included)
-TCP and 3G Tweaks For Better Network
-SD Card Read Speed ahead Set to 3072kb(4096 is Very agressive)
-Better Battery Life through Battery Tweaks and Linux Battery Tweaks too
-VM Tweaks
-Mutch More Smoother Phone!!
-A Lot More!!!
Requirements:
-Android Gingerbread 2.3.x Or Higher
-At least 1MB free on /system
-Root Acces
-Kernel that supports init.d
-Ext4 lagfix if you want to use the remount script
Installation:
1-Download Flashable Zip
2-Reboot to recovery
3-Mount /system
4-Flash via recovery
5-reboot and enjoy!!
6-No need to Fix permisisons the Updater Script Does
In Package:
-System/xbin/Zipalign
-System/etc/init.d/05Lagfixer(Contains,LMK and MinFree)
-System/etc/init.d/s78enable_touchscreen_1(TouchScreen Script)
-09sdcardspeedfix
-S70darky_zipalign
-S98system_tweak
-S98CFS(I/O ptimization)
Credits:
-Pikachu01
-Zeppelinrox
-Juwe11
-ChainFire
-Darkyy
-broodplank1337
-Any XDA Member/Dev That Helped me in this Project
Importants Notes:
-Do not Use any Other Script With This
-No need to Fix permisisons the Updater Script Does
-You can use It With ICS ROMS
-Please For anyone Who want to Use it in His Own ROM,ask For permissions Before
-Please If you have any Question/suggestions/anything Else,Please don't Spam Me With PM !!post In this Thread instead!!
Opinions of Some users:
spacecaker said:
Damm phone feels incredible fast now and not laggy
Click to expand...
Click to collapse
Sonic0509 said:
I didn't expected it to make Ace that smooth! Much smoother than LagFree3.
Click to expand...
Click to collapse
nishanty13 said:
Really a great script. Felt the difference just after the boot.
Click to expand...
Click to collapse
spacecaker said:
Lol my anims are much smoother
Tw works good
No bugs
Speedy
Lagless
Amazng speed
Mormally takes 3 minutes to load my apps nw they are there immidiatly wow
25 seconds to load sd card
Click to expand...
Click to collapse
Peteragent5 said:
WOW I thought I needed to reflash my MIUI GB because this script made my phone stuck at splash screen when it really wasn't.
I had to wait a long time though, but maybe that was the scripts doing its magic!
After my MIUI GB booted up, it felt alot smoother! No kidding!
Click to expand...
Click to collapse
Reserved 1
reserved 2
Reserved 3
Woohooo you really did it!
I mean special for mini! Hahah
Thanks sir!
What is ext4 lagfix?
Btw can I use it on custom rom?
I mean maybe in custom there is another scripts?
Sent from my GT-S5570
droidface said:
Woohooo you really did it!
I mean special for mini! Hahah
Thanks sir!
What is ext4 lagfix?
Btw can I use it on custom rom?
I mean maybe in custom there is another scripts?
Sent from my GT-S5570
Click to expand...
Click to collapse
EXT4 Lagfix Mean File system in EXT4,and as montioned in OP Clean init.d From Scripts/Tweaks Before Flashing Mine!!
slaid480 said:
EXT4 Lagfix Mean File system in EXT4,and as montioned in OP Clean init.d From Scripts/Tweaks Before Flashing Mine!!
Click to expand...
Click to collapse
So I just delete everything in init.d folder?
Sent from my GT-S5570
waiting for tester,testimony from other mini user then I'll flash this
I posted in the ace forums so as to try on our mini too...thanks OP
And btw do i need to partition my sd card for this ? No rite ?
Goin to try as soon as i get a reply...
freakyfriday said:
I was posted in the ace forums so as to try on our mini too...thanks OP
And btw do i need to partition my sd card for this ? No rite ?
Goin to try as soon as i get a reply...
Click to expand...
Click to collapse
no need to Partition,EXT4 mea File system Format o internal transflash,If you have a Custom Kenrel Just Flash it Directly!
You can still use A2SD programs with these scripts right? (but not superchargerv6 etc)
slaid480 said:
no need to Partition,EXT4 mea File system Format o internal transflash,If you have a Custom Kenrel Just Flash it Directly!
Click to expand...
Click to collapse
K thanx...goin offline..givin a try..wish me luck lol
Will report again as soon as the script does its wonders as the claims it will
slaid480 said:
no need to Partition,EXT4 mea File system Format o internal transflash ,If you have a Custom Kenrel Just Flash it Directly!
Click to expand...
Click to collapse
How do I know that my File system Format o internal transflash supported?
Sent from my GT-S5570
droidface said:
How do I know that my File system Format o internal transflash supported?
Sent from my GT-S5570
Click to expand...
Click to collapse
what kernel you are using??
slaid480 said:
what kernel you are using??
Click to expand...
Click to collapse
I'm sorry sir... I don't know...I'm totally noob
But I'm using emanom v5 rom...
Sent from my GT-S5570
Is this flashable? I tried flashing it but nothings happening...How do I know this script is working?
If its not flashable, I have to move everything to the right place and set permission to wat? Please help me..
JoK€R said:
Is this flashable? I tried flashing it but nothings happening...How do I know this script is working?
If its not flashable, I have to move everything to the right place and set permission to wat? Please help me..
Click to expand...
Click to collapse
Like I said In OP mount /system before Flasinh it set permisisosn too!
JoK€R said:
Is this flashable? I tried flashing it but nothings happening...How do I know this script is working?
If its not flashable, I have to move everything to the right place and set permission to wat? Please help me..
Click to expand...
Click to collapse
did you read first post if you hawe rom befor flashin this script check init d and then flash script and check init d folder and watch if this work or not
yes this flashable
May I use this for my MORe rom?
slaid480 said:
Like I said In OP mount /system before Flasinh it set permisisosn too!
Click to expand...
Click to collapse
Wat are permissions to set? Sorry m noob..
Hello to all.
I'm here again
STOP! THIS MOD IS ONLY FOR SAMMY JB AND ICS BASED ROM! IT DOESEN'T WORK ON CM10, ASOP, AOKP, MIUI OR OTHER ROM!
THE PROBLEM
Our gs3 has a very bad memory managment. Ram decrease, lags, memory leak and a lot of problem with multitasking are present on this wonderful device. We have a very important hardware but 1gb of ram and a bad software optimization make our gs3 not give a good feeling in heavy usage.
THE SOLUTION
bestMultiTaskingFix is a set of tweaks that allows to solve bugs management of memory and no possibility of mulitasking the galaxy s3.
Through this zip you can solve these problems and eliminate lags and manage a very large number of applications at the same time without having problems of slowness of poor memory.
In addition app phone, contacts and camera are locked in memory to make these faster to run.
I can play 2games togheter and navigate on internet with firefox and send messages with gosms without lags. Of course more apps are opened more is the risk of lags and leak of memory so be carefull.
FIRST OF ALL, do a Nandroid backup, as well as a backup of your sd-card content !
You're doing this at your very own risk, I'm not to be held responsible if something goes wrong
There is a very small risk of damage your internal memory since the continued operations of I/O of swap but is a very small risk.
Click to expand...
Click to collapse
What do you need
Galaxy s3 , root and custom recovery
Kernel with swap support
If you have Supercharger disable it!!
If you have Zram enabled, disable it!!
If you have HardSwap enabled disable it!!
Donwload the zip attached
Buil prop editor installed (https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor)
Remove all memory app, task killer with oom or minfree settings like AutoKiller Memory Optimizer, System turner, rom toolbox or similar. You can use these but not for set up memory stuffs!!!
THE GUIDE
Download latest bestMultiTaskingFix
1)Edit your build.prop file
Open Built prop editor and change these value:
- davilk.vm.heapsize must be setted to 192m
- davilk.vm.heapstartsize must be setted to 8m
- davilk.vm.heapgrowthlimit must be setted to 64m
Then reboot
2)Go into recovery and flash file
a) Flash bestMultiTaskingFix.zip
b) Reboot your phone
Notes
Not use any memory app, task killer with oom or minfree settings like AutoKiller Memory Optimizer, System turner, rom toolbox or similar. You can use these but not for set up memory stuffs!!!
Not use supercharger!!
You can check if swap is working installing terminal emulator and writing free. If values of space in Swap line are different from 0 value, you are ok.
If you have lags, kill all process with a task killer like advanced task manager(https://play.google.com/store/apps/details?id=mobi.infolife.taskmanager)
Changelog
Code:
8.0
Removed lock app script. Is not necessary anymore and may cause lags
[B]New parallels and prioprity swap method for incredible performace[/B]
Tweaked and fixed busybox included
New kernel tweaks
Minfree values optimized
------
7.0
ALL OPENED APPS IN LATEST 4 SECONDS ARE LOCKED IN MEMORY EVERY 4 SECONDS so the possibility of killed apps is now ridicolous! (0 battery drain!!)
Better performance without any lags up to 12 apps running in same time (MAX 20 APPS RUNNING IN SAME TIME WITH A 301 APPS INSTALLED IN MY SCENARIO!)
Optimized for multiwindow use!
Minfree changed for best performaced and quick app load!
Adj values restored to stock (not need to
Random reboot problem fixed
New kernel tweaks and tweaked values
Bigger swap size
------
6.0
[SIZE="4"][B]NO LAGS WITH UP TO 18APPS![/B][/SIZE] (please report now!)
Phone app, contacts app, camera app and the android core are locked in memory for fast access and better performace
Vm HeapSize changed (see build.prop edit and chage it in your configuration)
[B]Minfree changed for best performance![/B]
Big swap size
New kernel tweaks and tweaked values
Adj values changed
New prop values added directly in the script!
No need to wipe dalivk cache so first flash is quick now
Random reboot finally fixed
------
5.0
Random reboot problem fixed
Small Lags are fixed (please report)
Vm HeapSize changed (see build.prop edit and chage it in your configuration)
Minfree changed
Swap size decreased
Kernel tweaks
Adj values changed
------
4.5
[B]Lags completely gone[/B]
[B]Compatibile with SAMMY ICS[/B]
[B]Build.prop values tweaked. Be sure to use the latest one in firt step of guide[/B]
Swap size adjustament
Minfree values tweaked
Kernel tweaks and optimization
Adj value tweaks
------
4.0
[B]Mod of zeppelinrox is removed.It's not really necessary anymore[/B]
[B]Build.prop values tweaked. Be sure to use the latest one in firt step of guide[/B]
Little swap size adjustament
Minfree values tweaked
kernel tweaks and optimization
------
3.5
[B]Now system can swap more without lags with 18 apps opened![/B]
Swap size tweaked
A lot of kernel tweaks and optimization
Minfree tweaked according to new swap size
------
3.1
[B]Build.prop values tweaked. Be sure to use the latest one in firt step of guide[/B]
Little swap size adjustament
Minfree values tweaked
------
3.0
[B]Build.prop values tweaked. Be sure to use the latest one in firt step of guide[/B]
[COLOR="Red"]Service.jar includes Maximum MultiTasking Mods[/COLOR] (thanks to zeppelinrox)
Swap size tweaked
A lot of kernel tweaks and optimization
Minfree tweaked according to new swap size
[B]Smooth as a baby's ass :) with 15 application running at same time!![/B]
------
2.5a
Fixed no swap bug (need feedback)
------
2.5
[B]Build.prop values tweaked. Be sure to use the latest one in firt step of guide[/B]
Little swap size adjustament
Minfree values tweaked
Nova launcher add widget bug fixed
------
2.1
Swap size adjustament
Make upgrade system more easy: just flash and reboot
------
2.0
New minfree values to avoid small lags here and here
Bigger swap size to avoid small lags
Faster speed on boot since swap file is not always created but only started if present
Completely fixed no swap bug on some devices (need feedback to test)
------
1.4
FIxed not swap on some devices
-------
1.0
Initial relase
********************************************************************
Credits
Big thanks to gokhanmoral for his wonderful Siyah Kernel (http://forum.xda-developers.com/showthread.php?t=1709686)
Big thanks to Yank555 for swap idea
Big thanks to foxhound team for testing
Big thanks to rlorange for busybox and parallels swap with priority idea
********************************************************************
IMPORTANT NOTE FOR DEV/ROM COOKER/WHO WANT'S TO PORT MY MOD
If you want to use the bestMultiTaskingFix in your ROM, give proper credit and a HTML link to this thread.
Do not modify it, do not rebrand it: the name is bestMultiTaskingFix
Modification and redistribution of the attached script is not permitted at all without permission of Mattiadj member
This means that you cannot feel free to zip up the attached script with other tweaks and this means that it is not be edited and shared.
WARNING for USERS: If you use or encounter a ROM with the bestMultiTaskingFix without proper credit given and no bestMultiTaskingFix source links, please make the Developer aware of it, and if necessary, please let me know about it. Thank you.
Personal Use: You may tweak the bestMultiTaskingFix (leaving credits intact) to your own personal liking as long as it is NOT redistributed in any way.
If you like my job, buy me a beer
Now....feedback, feedback and feedback!
Great mate!! I hope in another great work!!!
Sent from my iPhone Fu**er S3 using Tapatalk 2
Thanks mattiadj! Gah.. makes me sad we have to go through all this just to make our phone function correctly.
Sent from my GT-I9300 using xda premium
hi matt !
siyah tweaks zipp gives me error 7 in recovery (touch 6.0.1.2)
xanthrax said:
hi matt !
siyah tweaks zipp gives me error 7 in recovery (touch 6.0.1.2)
Click to expand...
Click to collapse
Which error gives?
Inviato dal mio GT-I9300 con Tapatalk 2
mattiadj said:
Which error gives?
Inviato dal mio GT-I9300 con Tapatalk 2
Click to expand...
Click to collapse
error (status 7) assert failed
-=-=-
i tried to toggle signature to(enabled) but still the same
could it be a bad zip ?
Sorry guys now siyah config cwm is fixed
mattiadj said:
Sorry guys now siyah config cwm is fixed
Click to expand...
Click to collapse
so ... where is it ? the same attachment ?
-=-=-
ok , is there , a new one , thanx !
---------- Post added at 04:00 PM ---------- Previous post was at 03:42 PM ----------
so , i`ve done all steps unless the kernel , i used yhe last siyah as long as i`m on Omega v25 but my memory seems to be the same or even less .
i use cool tool ram monitoring and it shows me 170 - 210 average
is there any way to check the status in android emulator ?
-=-=-
to be honest i`ve got about 350 apps (including system ) on my phone but still , before this tweak i use to have an average of 300 mb free ram using autokiller only
-=-=-
tell me how to check the status , i`ve done the swap with minitool
-=-=-
switced to ultimate the free ram is back to 300 ...Omega JB (not ICS) v25
xanthrax said:
so ... where is it ? the same attachment ?
-=-=-
ok , is there , a new one , thanx !
---------- Post added at 04:00 PM ---------- Previous post was at 03:42 PM ----------
so , i`ve done all steps unless the kernel , i used yhe last siyah as long as i`m on Omega v25 but my memory seems to be the same or even less .
i use cool tool ram monitoring and it shows me 170 - 210 average
is there any way to check the status in android emulator ?
-=-=-
to be honest i`ve got about 350 apps (including system ) on my phone but still , before this tweak i use to have an average of 300 mb free ram using autokiller only
-=-=-
tell me how to check the status , i`ve done the swap with minitool
Click to expand...
Click to collapse
As said... This method is tested on ics! For JB I don't know if it works...
Inviato dal mio GT-I9300 con Tapatalk 2
mattiadj said:
As said... This method is tested on ics! For JB I don't know if it works...
Inviato dal mio GT-I9300 con Tapatalk 2
Click to expand...
Click to collapse
at least has been tested on JB Omega v25
thanx !
xanthrax said:
at least has been tested on JB Omega v25
thanx !
Click to expand...
Click to collapse
i don't think siyah kernel for jb is stable as for ics.
mattiadj said:
i don't think siyah kernel for jb is stable as for ics.
Click to expand...
Click to collapse
you`re right ! it isn`t !
Updated minfree values in first post
Hi i have a couple of questions
1. What does your solution do exactly, can u explain in layman terms?
2. Why remove V6 supercharger? Because it conflicts with your solution or because it doesn't work as it should?
3. This is more of an unrelated question. If I already have supercharger installed default in my rom, using Autokiller together with it is ok or not?
This seems to hard isn't there a cwm file that we can flash. Thank you
gurbuza said:
This seems to hard isn't there a cwm file that we can flash. Thank you
Click to expand...
Click to collapse
Not at all... Not that hard actually..
Try trying it rather than thinking of trying it.
Sent from my GT-I9300 using xda app-developers app
This is what I am waiting for!
Sent from my GT-I9300 using xda app-developers app
Guys I'm testing something new stuff stay tuned
Inviato dal mio GT-I9300 con Tapatalk 2
Tomorrow I'll update the guide to make it more easy and with a cwm zip with the correct configuration of values all myself made!
I'm testing it from 36 hours and the result is excellent. Wonderful multitasking and no lags at all! Switching from nova 3 to dead trigger then to Facebook and Tapatalk then to nova 3 without lags is awesome! Now the power of quad core finally can come out!
Inviato dal mio GT-I9300 con Tapatalk 2
Might be worth commenting on how battery life is using this guide?
It's interesting to see how much free RAM you have on your screenshots. I always seem to be stuck at ~100mb. Might give this a try!
±SmartFluid±
Hello everyone,
this is a another contribution by me. This time it's a SCRIPT. I took some code from another scripts, modified them a little bit and added some own code. I tried it myself and saw more speed. Well, don't have much to talk about, so let's start...
Features
• Disable/Enable logger with terminal commands (Disable for more performance)
• R/W tweaks
• Network tweaks
• Better Remount
• Replaces /dev/random with /dev/urandom for more performance (maybe placebo)
• Disables syncookies
• Disable Journey (only effective if you have EXT4 filesystem)
• Set Renice to make phone more effective
• FPS Stabilizer
• Some Important Build.prop tweaks
• And much more... Test it yourself
To do things, write following in terminal:
Code:
su
smartfluid
Installation
1. Enter Recovery Mode (VOL UP + HOME BUTTON + POWER BUTTON)
2. Flash into Clockworkmod Recovery (Get it from here)
3. Mount /system AND /data
4. Flash the script
5. Enjoy!
If you want to uninstall this script, download the Uninstaller from the attachment and follow the above instructions.
Credits
pikachu01
ImBaWind
Pizza_Dox
Darkyy
tazlooney89
Me
And with some help from:
@devloz
@Sniper Killer
@El_Dark
If you have any question or suggestion, don't hesitate writing to me.
The latest attachment is the newest version.
Use the No-Renice version if you experience lags/high RAM usage
The FAQGot a question? Search here first for the answer, and THEN only post.
Q: Does it increases performance/battery life?
A: Just Try it. If you don't like it, you have an availible uninstaller.
Q: Is it compatible with ... ROM?
A: Yes, it's universal.
Q: Will you add ... feature in the next version?
A: Just PM me if you have any suggestions, I will decide what will come with the next versions.
(If you want sqlite and/or zipaligning, use this!)
Q: Can I flash the newer version over the older one?
A: Yes, you can. The newer script will do everything for you.
Q: When does the next version come out?
A: Only wait. It will come out when I do think it's new features are worth a new version.
Q: Can I use it for my ROM?
A: Yes, you may release a version with my script intergrated, only thing to do is to give proper Credit.
Q: Is this script compatible with ... script?
A: CrossBreeder does work and is a nice combination with this script. Cronmod has no problem too. Other tweaks will most probably not work (or slow down the device).
[Script][V1] ~SmartFluid~ == To Boost Your Ace
First. Seems good. Reserved.
EDIT: Cool. It's smooth. It doesn't affect much the battery duration :victory: . Keep it up bro :thumbup:
Sent from a thing that can send other things to other thinggy things
Second will test it
Gesendet von meinem GT-I9001
ProGameAndy said:
First will test it
Gesendet von meinem GT-I9001
Click to expand...
Click to collapse
Dont quote whole OP plz.
Hit Thanx If I helped U - Its frEE
Bootanimations-MDPI
Post Your DevicE History HerE.
Reserved!
Sent from my GT-I8190N using Tapatalk
interesting, i test it
Reserved
Sent from my GT-S5830i using Tapatalk 2
only for 5830i??
Отправлено с моего GT-S5830i через Tapatalk
+1 Reserved
misha1996 said:
only for 5830i??
Отправлено с моего GT-S5830i через Tapatalk
Click to expand...
Click to collapse
Could work with other devices, but it's mainly optimized for Ace(-i)
Gesendet von meinem GT-S5830i mit Tapatalk 2
This scripts is great , very smooth, no lag at all, very small size one question, for what is logger?
ivcha90 said:
This scripts is great , very smooth, no lag at all, very small size one question, for what is logger?
Click to expand...
Click to collapse
The logcat. If you aren't debugging something you ain't needing it, so you can turn it off. Disabling it can give some performance.
Gesendet von meinem GT-S5830i mit Tapatalk 2
Ok bro, for now working perfect, only in antutu benchmark i get lower score for GPU, but much more for RAM
I have a new test version, if you have enough time you can check and give feedback
Android-fany said:
I have a new test version, if you have enough time you can check and give feedback
Click to expand...
Click to collapse
Usually after booting my phone, the pattern unlock lags for about 5 seconds, after flashing this test, i get almost no lag at all, even when sd card is still being read!
This is by far my favourite tweak to date.
Wow! Very impressed!
Really nice work :good:
Got almost 0 lags today.
Some features which I would like to be included on the future :
- Low OOM/Minfree/LMK by default (No one will complain about RAM usage anymore)
- Some android features enabled by default (Like purgeable assets, Surface Dithering, Kernel JNI error checking)
- Mediascanning tweaks
Well thats enough. Later I will tell more suggestions.
Congrats for your work fany!
I try new version and its faster i agree with sniper to add 16-bit purgeable assets, Surface Dithering, Kernel JNI error checking so if possible i will be happy to see that in new release
Yea, 16-Bit won't be bad. Will try to add it in the next releases. Same applies to Media Scanning.
Oh, and btw, new test release
http://www.mediafire.com/?hivlw20ihlq7w14
Gesendet von meinem GT-S5830i mit Tapatalk 2
Umm...good work
I was about to make one,but I see your scripts more effective
I suggest you to add crossbreeder....if you need any sort of help PM me