Code:
This is the stock kernel from the N7000XXKJ4 firmware. Nothing more.
This can be used to remove that pesky yellow triangle after you root.
Please let me know if this works. I do not own a note and I cannot
test, however honestly not sure why it wouldnt.
Place the .tar file in PDA section of odin. Flash.
http://db.tt/BUmxqqTP - Supposedly not working.
http://db.tt/TfalWJj6 - Here is the stock zImage, no .tar format. Works the same as a .tar file however, flash in PDA of odin.
Again please let me know if this works.
Remember to press thanks if you use it and it works
HOW TO REMOVE YELLOW TRIANGLE
(1) Flash netchip's kernel, to obtain root.
(2) Make sure you have the netchips kernel in zImage. (ZIP --> extract --> TAR --> extract --> zImage).
(3) Push the zImage file to /sdcard . It must still be called zImage !
(4) Install The CWM app ---> http://db.tt/psc0JdvG
(5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed)
(6) Fire up ODIN, and flash the Samsung kernel from the above post
(7) Boot the device with the stock kernel. CWM Manager will still be available.
(8) Start CWM Manager, select Flash Kernel, and select the zImage from netchip you previously put on your SD-card. The kernel will flash and the device will reboot.
(9) You will now notice you no longer have the warning triangle during boot, but you are actually running netchips kernel.
(10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files)
You may also leave the stock Samsung kernel installed and you will still be rooted, however no clockwork recovery. If you want to leave the stock kernel installed SKIP STEPS 2,3,4,5.
Credits to Chainfire for the write up! Since I know people are lazy and wont search for it.
antiochasylum said:
HOW TO REMOVE YELLOW TRIANGLE
(1) Flash netchip's kernel, to obtain root.
(2) Make sure you have the netchips kernel in zImage. (ZIP --> extract --> TAR --> extract --> zImage).
(3) Push the zImage file to /sdcard . It must still be called zImage !
(4) Install The CWM app ---> http://db.tt/psc0JdvG
(5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed)
(6) Fire up ODIN, and flash the Samsung kernel from the above post
(7) Boot the device with the stock kernel. CWM Manager will still be available.
(8) Start CWM Manager, select Flash Kernel, and select the zImage from netchip you previously put on your SD-card. The kernel will flash and the device will reboot.
(9) You will now notice you no longer have the warning triangle during boot, but you are actually running netchips kernel.
(10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files)
You may also leave the stock Samsung kernel installed and you will still be rooted, however no clockwork recovery. If you want to leave the stock kernel installed SKIP STEPS 2,3,4,5.
Credits to Chainfire for the write up! Since I know people are lazy and wont search for it.
Click to expand...
Click to collapse
or use the Dongle Usb...right
andromeda1968 said:
or use the Dongle Usb...right
Click to expand...
Click to collapse
does it work?
faby71 said:
does it work?
Click to expand...
Click to collapse
Did not work on my Galaxy Note.
andromeda1968 said:
or use the Dongle Usb...right
Click to expand...
Click to collapse
Right, but it does not work on the Note.
Sent from my Insanity powered SGS2
Provide Note
I will provide a Note tomorrow afternoon for you (antiochasylum) to test and verify what you are providing is working for all.
nascar24usa said:
I will provide a Note tomorrow afternoon for you (antiochasylum) to test and verify what you are providing is working for all.
Click to expand...
Click to collapse
Sounds good
Sent from my Insanity powered SGS2
But does it reset the counter ?
aalupatti said:
But does it reset the counter ?
Click to expand...
Click to collapse
no
Maybe we can ask Odia for solution!
netchip said:
Maybe we can ask Odia for solution!
Click to expand...
Click to collapse
Maybe. But the USB JIG DOES NOT WORK, so correct it will not reset the counter. As netchip stated, maybe Odia can help.
antiochasylum said:
Maybe. But the USB JIG DOES NOT WORK, so correct it will not reset the counter. As netchip stated, maybe Odia can help.
Click to expand...
Click to collapse
Maybe flashing the older bootloaders from the SGS2 will make it work...but this might be very risky to try.
clubtech said:
Maybe flashing the older bootloaders from the SGS2 will make it work...but this might be very risky to try.
Click to expand...
Click to collapse
Please dont do that, it will brick your device 100%
Sent from my GT-I9100
antiochasylum;18884167
[url said:
http://db.tt/BUmxqqTP[/url]
Again please let me know if this works, if not I will upload just the zImage.
Click to expand...
Click to collapse
Your archive is not working ..
bodivas said:
Your archive is not working .. I have prepared and verified this archive., works 100%..Kernel stock
Click to expand...
Click to collapse
If it does not work please do not post a link to a multiupload. Send me a PM, and let me know. Please edit your post and remove the link.
And what doesn't work about mine?
Sent from my Insanity powered SGS2
http://imageupload.org/?d=57C5963B1
standing still and not move beyond..
the trick with CWM&zImage does not work! The phone will restart with stock recovery 3e..
and I had to reinstall busybox..
Same here. Flashing netchip's zImage from within CWM-Manager works (or at least it looks like), but "Reboot into Recovery" ends up in the standard Android System Recovery. Also, according to Settings -> Phone Info -> Kernel there's still the stock kernel in place ([email protected] #2)
I am busy with learning howto write an app.
You can expect it over a 1 a 2 week time.
Sent from my GT-I9100
Not work
Related
I tried to install CF-Root-JPJPA-v1.2-Busybox-1.15.3
(did everything correct, not sure is my JPJPA or w/e is good (since it doesn't say where to check, so I kept searchin and I found "JPA")
Now I cant boot, I get some pic with a phone and a doted line to a pc with a caution sign on the line
plz help
Flash again. Try different kernel speedmod by hardcore, presumably you have 3br?
3br?
I'll try to flash that speedcore.
bizzyd said:
3br?
I'll try to flash that speedcore.
Click to expand...
Click to collapse
3 button recovery to get to download and recovery to reflash kernel or rom.
I can go in download mode, not in recovry mode >_>
Thanks; the speedcore kernel works!
Now, how do I get the CF-Root working?
http://forum.xda-developers.com/showthread.php?t=788108
I have no clue what version I need :/
bizzyd said:
I can go in download mode, not in recovry mode >_>
Thanks; the speedcore kernel works!
Now, how do I get the CF-Root working?
http://forum.xda-developers.com/showthread.php?t=788108
I have no clue what version I need :/
Click to expand...
Click to collapse
Go to settings/about phone/ to exactly what firmware you are using.
when i was on xwjpa there is a matching cf root kernel for it id say you used the wrong one the xwjpa is in the second post the 1.17.1zip works for me.
Ah it says xwjpa; Ill get File Type: zip CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1.zip then, thx!
If my note is was never rooted and I just flashed a speedmod kernel which is already rooted, will i have a rooted phone? thanks.
I don't think so.. You may not have root access now. For a complete and proper root follow this thread.. Here is the link
http://forum.xda-developers.com/showthread.php?t=1424997
JoJo2211 said:
If my note is was never rooted and I just flashed a speedmod kernel which is already rooted, will i have a rooted phone? thanks.
Click to expand...
Click to collapse
If you are not rooted, then how you flash sppedmod kernel?
Yes, it will be rooted. In fact this was exactly how I first rooted my phone...
Steps:
1. Open PC Odin 1.85 (make sure adb drivers are installed in your PC)
2. Click PDA and select Speedmod kernel in .tar archive
3. Click Start!
Result: rooted stock ROM with working CWM recovery
Extra bonus: Yellow triangle AND custom binary counter +1 (Free of Charge!)
In case you don't want the extra bonus, do a jig method to remove them (which I did too).
kopitalk said:
Yes, it will be rooted. In fact this was exactly how I first rooted my phone...
Steps:
1. Open PC Odin 1.85 (make sure adb drivers are installed in your PC)
2. Click PDA and select Speedmod kernel in .tar archive
3. Click Start!
Result: rooted stock ROM with working CWM recovery
Extra bonus: Yellow triangle AND custom binary counter +1 (Free of Charge!)
In case you don't want the extra bonus, do a jig method to remove them (which I did too).
Click to expand...
Click to collapse
Why u wanna go around when you can directly do it thru Zergrush exploit method?!!
priyanv said:
Why u wanna go around when you can directly do it thru Zergrush exploit method?!!
Click to expand...
Click to collapse
There is only one logical answer to that... it was not directly rootable...
Thread should be closed.
I can confirm, he has successfully rooted.
I have assisted him with routine method to root.
here is msg i recieved.
JoJo2211 said:
Yeah I just updated the LA6 rom using CWM. Now to flash LA6 cf-root kernel, do I put that on the external sd or internal sd? thanks
Click to expand...
Click to collapse
Hi, i installed franco kernel the r1 a few days ago using cwm, today i saw the r3 and wanted to install it,
when i enterned the cwm program i got this:
"This version of cwm manager should be used with cf-root v5.0 or newer .it appears you are running a different kernel.various features have been disabled."
When i ask it to reboot into recovery, it asks me i say yes and nothing happens
I tried to enter the recovery manually but there was no succes,
What can i do?
Sory for my english, thanks for your help.
vovagershon said:
Hi, i installed franco kernel the r1 a few days ago using cwm, today i saw the r3 and wanted to install it,
when i enterned the cwm program i got this:
"This version of cwm manager should be used with cf-root v5.0 or newer .it appears you are running a different kernel.various features have been disabled."
When i ask it to reboot into recovery, it asks me i say yes and nothing happens
I tried to enter the recovery manually but there was no succes,
What can i do?
Sory for my english, thanks for your help.
Click to expand...
Click to collapse
Follow the instruction in the website:
http://forum.xda-developers.com/showthread.php?t=1329360
You can put back the appropriate kernel into your SGN.
Can it be possible that my rom kingdroid 1.6 cant work with this kernel?
franco kernel ics(r1/r2/r3) is ok for ICS stock rom and also for kingdroid ICS
check your root
And how do i do that?
vovagershon said:
And how do i do that?
Click to expand...
Click to collapse
If you can paste a file into the system folder then you have root. You need a root file manager like es explorer available free in the Market. You need to go into the setting of this program, enable root and allow write on the system folder.
I checked and my phone is rooted, when im trying to flash the kernel from cwm app it says zlmage not found.
Whar should i do?
Install a kernel using the odin?
Can u just extract zimage and flash it using mobile odin... pc odin wud increase the flash counter and even bring triangle with exclamation on boot screen...
OK, that's what i did,
i downloaded the r3 kernel zip, turned it into a tar file using this method
http://forum.xda-developers.com/showthread.php?t=1644240
flashed via odin and that's it. everything is back to normal, i can enter the recovery
By the way, that yellow triangle, i got it since my first custom rom, what that means? and the counter to?
Thanks for the help guys.
that means, your warranty has been voided if you show up to a service center with that yellow triangle. there are ways to remove, but that includeds re-flashing kernels and/or roms, removing the triangle notice (and flash counter) and doing everything from scratch.
search the forum.
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/
I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.
ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.
andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help
Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?
You should be on rooted ICS. Then you flash Criskelos rom from CWM
ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!
Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same
Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.
Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.
By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!
same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...
FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.
juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.