keeping up to date with newer questions ;) - XPERIA X8 Q&A, Help & Troubleshooting

Firstly watch
this video
hi there reader, welcome to this thread will this will keep you up to date with the x8, custom kernels, custom roms, bugs with fixes, no signal bug in a rom and plenty more here. this will be updated each week.
remember, before you post a new thread search this post for the question and the answer, if you cant find it here then use the search button and if you cant find it then, you may post a new thread or post a reply here< either with a q or a normal replyAND DONT SPAM THIS THREAD!!!OR POST REPLY'S SAYING THANKS, THERE IS A THANKS BUTTON FOR THAT!!
Anyway, back to the thread!
if you need to root your phone.
Dont know what rooting is?
A: Well, it gives you superuser access, like running as a special administrator. having superuser rights means you can also modify your system, installing modification's and much much more.If you would like to root your phone then click here
done that? if you did splendid
right so now you'v rooted your phone you are in top controll now.
if you have cypress multitouch for your x8 then this should activate your special chip: here
if you have synaptics fake pinch to zoom then click this little link: here
great stuff, isn't it!
now to recoveries...
firstly xrecovery. this is sort of the main recovery for our x8. you can install doixanh's roms through it well at least v013 or lower now that he switched and now needs cwm recovery to install now.
you can also install rachts roms as well
Q: How do i install rachts roms because it wont work through updating custom zip ot choosing a custom zip!
A: what you do, is you unrar the file. you can use winrar, or what i have:RAR File Open Knife - Free Opener. which is an open source project that works a treat. my dad uses it too. he told me to get it since its easier to use...
anyway once you unrared the file, put the file into xrecovery>backup and save it to there.
After that, boot into xrecovery on your x8 and go to: Backup/Restore>restore then chose that rom you saved in there.
Q:why are there no more updates for rachts roms?
A: The thread got closed, so there will be no new updates, you will have to make fixes yourself.
Next up cwm recovery: This is hard to get for our phone. it comes preinstalled in gingerdx's roms
if, however you dont use a gingerdx rom, then you can manualy install it by clicking here
cwm is more advanced than xrecovery.
Q: is there anything special i need app i need to get to install xrecovery?
A: Yes! Its called busybox. its from the android market. once you have installed that, open the app and it will come up with which version to install, click the OLDEST version because new versions are not compatible with it. to install and learn a little more click here
the only reason its for x10 mini is because other versions such as v02 and v03 do not work with the x8. and because the x8 and x10 mini are very close relatives!
Did you get any of them?
now to roms:
heres the link to all rachts roms! remember, i said how to install them earlier... here
heres froyobread by doixanh: here
heres gingerdx also by doixanh: this
Install doixanh's roms the normal way>install update.zip
or> custom.zip!
gingercruzt rom: here
gingerxperia rom: here
install these the normal way too.
those are just main and recognized roms. the other roms you will have to search for yourself.
Now for the Questions and Answers!
Q: gingerdx seems to have a battery drain, how do i fix it?
A: battery drain seems only with a few people, boot into xrecovery, do a battery wipe.
Q:What is the best overclock frequency for the x8?
A: 710Mhz, you can go higher if your lucky but most of the time anymore and it becomes unstable.
so 710Mzh is the most stablest...
Q: can i get flash player for my phone?
A: Yes you can! all those people who disagree, they obviously dont research on this stuff! heres the link to adobe flash player 10.2 for armv6: here
Q:can i play gameloft games for my x8 such as modern combat, n.o.v.a?
A: yes you can. i have modern combat sandstorm and N.O.V.A for my phone. just google eg. n.o.v.a hvga
or n.o.v.a x8...
Q:help! iv bricked my x8, what do i do???
A: if you can get onto the se logo then boot into xrecovery and restore a working backup.
if that didnt work, restore it through seus (sony ecricsson update service)
Q:should i update the su binary?
A: no, for lots of people it leaves them with a broken su without working binary! never do that.
Q: there seems to be a camera bug in my rom!
A:lots of roms have trouble with camera.apk! also devs found it hard to make a new one so they started porting stock eclair's camera.apk and modifying it to make it work and look like a froyo or gingerbread camera
Q: which is rom is most dtable for our x8 out of froyo, gingerbread, honeycomb and ics?
A: Froyo because its a next platform up which makes it more stable and run faster, although there are some pretty good gingerbread roms out there, i myself use gingerdx. honeycomb is really no point sice it was made for devices with bigger screens and ics is out there it will just run like a snail racing an athlete...
Q:my market isnt working, it wont install the app/apps i want, iv tried everything but still it wont work!
A:click this
it should work, its the old market from android 2.1 i think. i must give a thanks to dimitrisioa for providing an answer to a question with this situation. he provided the link, thanks man
Q: what is freexperia and fxps cm7 project?
A: its a cm7 rom. The only reason I don't have it is because they rerote the entire kernal and ect. There is a link to their rom in the 3rd post
Q: my wifi keeps on switching on and off! is there any solution?
A: yes, try doing a full wipe in xrecovery/cwm. if that doesn't work then try wiping davlik cache/cache.
if that doesn't work then reinstall the rom. do both wipe data/factory reset and wipe cache.
if that doesn't work then find a wifi fix or get a new rom.
Q: got a question?
A: post it here!!
just remember, we dont accept trolling or flame wars here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remember to use the thanks button if i helped. this thread will be updated with newer questions every week on a tuesday and/or friday so keep the questions in!!!!!

i need some feedback
like questions, did it help?

also...
oh yeah, i nearly forgot, the freexperia's cm7 project by fxp
click here

also....
also you can check dare devil insides FAQ. i just did this one to help you guys and keep up to date with the newest questions

seriously guys, i need to know if it helped or not

ok and what can happen if i updated SU binaries? something bad or....?
and short question. instaling add-on on custom rom. HOW? rename add-on to update.zip or how?
thx

I really don't know whats about those SU binaries. I updated them succesfully and after that everything worked just as before.
Sent from my X8 using XDA App

gferen said:
ok and what can happen if i updated SU binaries? something bad or....?
and short question. instaling add-on on custom rom. HOW? rename add-on to update.zip or how?
thx
Click to expand...
Click to collapse
For sum people yes for some it breaks root. Addons rename them to update zip and flash em
sent from my rooted x8 using gingerdx

Godra said:
I really don't know whats about those SU binaries. I updated them succesfully and after that everything worked just as before.
For some people it breaks there root access but you really lucky. I can update my app but I don't need binary updates.
Sent from my X8 using XDA App
Click to expand...
Click to collapse
sent from my rooted x8 using gingerdx

Godra said:
I really don't know whats about those SU binaries. I updated them succesfully and after that everything worked just as before.
Click to expand...
Click to collapse
For sum people it breaks root access but u were lucky

wilbso said:
For sum people yes for some it breaks root. Addons rename them to update zip and flash em
sent from my rooted x8 using gingerdx
Click to expand...
Click to collapse
and install of addons is beter to perform in Xrecovery or CWM or is te same?

Flash them with xrexovery. You could try with cwm. But I prefer xrecovery

hehe ok then i was too fast. i didnt notify any speciality. so i will try update again with xrecovery

gferen said:
hehe ok then i was too fast. i didnt notify any speciality. so i will try update again with xrecovery
Click to expand...
Click to collapse
Cool
sent from my rooted x8 using gingerdx

i wanna factory reset the data of my x8...
how can i do it...?

sunnysadnani said:
i wanna factory reset the data of my x8...
how can i do it...?
Click to expand...
Click to collapse
Boot into xrecovery or cwm go down until you see full wipe and click that

sunnysadnani said:
i wanna factory reset the data of my x8...
how can i do it...?
Click to expand...
Click to collapse
If you're not rooted, goto Settings > Privacy > Factory Data Reset
Leave a thanks if I helped!

tnx . but i can't understand !!! lol

hye there!
sorry for noob question
currently i'm using stock rom,
(btw,im rooted oledi )
how can i backup all my contacts number and messages?
(coz everytime i'm flash new rom,all data will be lost)
thanx 4 da info given

21th century apes said:
hye there!
sorry for noob question
currently i'm using stock rom,
(btw,im rooted oledi )
how can i backup all my contacts number and messages?
(coz everytime i'm flash new rom,all data will be lost)
thanx 4 da info given
Click to expand...
Click to collapse
for messages, u need to download any backup n restore app in market.
for contacts, just open contact,push menu button, select import contact to SD. it will create a .vcf file (if im not wrong) in ur SD

Related

DEVELOPMENT STOPPED[ROM][mod] THE VISION GINGERBREAD ROM for THRILL overclocked

development stopped
Selling phone
FOR TESTING AS I DO NOT HAVE REPLACEMENT PHONE SENT TO ME YET
Based on 03D gingerbread. Heavily themed with a stock like look... just does not have a stock LG look.
This is not my first rom. I have modded and/or ported roms for the x10 and the motorola bravo. I am slowly getting used to lg files.
This rom is a diet of the original with some tweaks. Thanks to all the other developers in the thrill and o3d Roms. My base file is used gingerbread 21a with some parts of framework from THAIZ (used mainly for battery step xml. It is overclocked with THAIZ kernel and picked up on some modding tricks from several developers. You can use most gingerbread kernels from 03D with this rom. I will add miscellaneous files to be added later i.e. games, and apps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Must have cwm recovery to install and already be on the gingerbread baseband or Gingerbread 03D rom from kdz. Tutorials for gingerbread are in the development section of 03d and thrill. This install does not erase data so you may have to manually erase in recovery menu depending on what rom you come from. PLEASE USE APN BACKUP AND RESTORE IN MARKET BEFORE INSTALLING
Just put in sdcard and install as zip in recovery.
Widgets and other files that can be installed by market are not included in rom. ​
I am not responsible for what you do to your phone. Use at your own risk.
Rom download
http://hotfile.com/dl/137107632/79c3607/GB_P920.zip.html
want your 3d games than just install this in recovery
Not uploaded yet
GB P925
removed tons of apps
apn backup and restore to restore your apn (please back it up before install)
sony ericsson wallpaper and picker
Ultima battery notifications 1%
tons of changes to icons and appearance
looks like a new phone
removed lg home (used Arc Launcher)
astro file manager
xda app
many .png files I made myself from original .png files
3d game converter
SONY BRAVIA ENGINE
removed apps that can easily be downloaded from market
made some modifications and tweaks to make it snappier and faster. Give me some time and I will do some other mods to it, maybe make a new lockscreen and stuff. I haven't had the phone very long.​
​
upload is done
http://hotfile.com/dl/135976654/a6670ad/GB_P925.zip.html
whats working/broken? want to give my co-worker some GB love, but hes afraid of the "beta" tag
Give me one more day and the beta tag will be done. Only not working is 4g but 3g is pretty fast... i get similiar download and upload speeds
Just have to do some minor cosmetic changes....
Im going to release a o3d version and a thrill version
nickL0V3 said:
whats working/broken? want to give my co-worker some GB love, but hes afraid of the "beta" tag
Click to expand...
Click to collapse
Sent from my LG-P925 using XDA App
Uploading rom... please try and leave some feedback
Sent from my LG-P925 using XDA App
Can you post up a link to the GB baseband for the Thrill? I went perusing around the O3D forum and didn't see it there.
Thanks in advance.
kiltedthrower said:
Can you post up a link to the GB baseband for the Thrill? I went perusing around the O3D forum and didn't see it there.
Thanks in advance.
Click to expand...
Click to collapse
Sadly its not out anywhere yet :-/ we have to wait for a leaked p925 GB or better yet an official release from ATT to get it.
Sent from my LG-P920 using XDA App
AeRo0 said:
Sadly its not out anywhere yet :-/ we have to wait for a leaked p925 GB or better yet an official release from ATT to get it.
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
I find it to be pretty much bs that GB is out yet to get official ATT update we have to wait for them to dumb down the system and add their bloat. I probably wont even update to it when it comes out i will just flash baseband and keep this euro open version, much nicer not being restricted.
...fighting ninjas at night. Talking about this and that.
Urabewe said:
I find it to be pretty much bs that GB is out yet to get official ATT update we have to wait for them to dumb down the system and add their bloat. I probably wont even update to it when it comes out i will just flash baseband and keep this euro open version, much nicer not being restricted.
...fighting ninjas at night. Talking about this and that.
Click to expand...
Click to collapse
Lol that's what I'll probly end up doing too I just meant that official is usually better than a leak
Sent from my LG-P920 using XDA App
bugs?
super fast and nice looking rom!
just a few things (not sure if they're bugs or just something im doing wrong):
1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
2. i cannot download some programs via market. its says "your device is not compatible with this item"
someone PLEASE, quickly help me with this....the market, i'll survive with...the network not working will only last so long...im going to have to leave the house sometime....
thanks!
Did you install new baseband?
mafiadesi said:
super fast and nice looking rom!
just a few things (not sure if they're bugs or just something im doing wrong):
1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
2. i cannot download some programs via market. its says "your device is not compatible with this item"
someone PLEASE, quickly help me with this....the market, i'll survive with...the network not working will only last so long...im going to have to leave the house sometime....
thanks!
Click to expand...
Click to collapse
Sent from my SGH-I997 using XDA App
well i used this method to install the original files
http://forum.xda-developers.com/showthread.php?t=1287236
i just assumed that this installed the new gingerbread baseband. when i finished the process, it said everything was successful. am i missing anything?
---------- Post added at 04:13 PM ---------- Previous post was at 03:24 PM ----------
i guess something went wrong with the kdz steps.
i redid it, but now im having a problem rooting with superoneclick. im using super one click v.1.9.5.0. is there some newer one i should be using??
cuz it gets stuck on "running psneuter" and it wont root
thanks!
mafiadesi said:
well i used this method to install the original files
http://forum.xda-developers.com/showthread.php?t=1287236
i just assumed that this installed the new gingerbread baseband. when i finished the process, it said everything was successful. am i missing anything?
---------- Post added at 04:13 PM ---------- Previous post was at 03:24 PM ----------
i guess something went wrong with the kdz steps.
i redid it, but now im having a problem rooting with superoneclick. im using super one click v.1.9.5.0. is there some newer one i should be using??
cuz it gets stuck on "running psneuter" and it wont root
thanks!
Click to expand...
Click to collapse
There is a newer version 2.2, I used it to root my again.
Sent from my LG-P920 using XDA App
yup! new 2.2 version did the trick!
thanks guys!
mafiadesi said:
super fast and nice looking rom!
just a few things (not sure if they're bugs or just something im doing wrong):
1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
2. i cannot download some programs via market. its says "your device is not compatible with this item"
someone PLEASE, quickly help me with this....the market, i'll survive with...the network not working will only last so long...im going to have to leave the house sometime....
thanks!
Click to expand...
Click to collapse
Do you have the gingerbread baseband?
i'm wondering what tweaks need to be applied to the o3d rom to make it stable on our thrill.
I'm happy with King 3D except I have a wierd battery issue. When I reboot the device, i lose 30% of my battery and have to recharge. It seems like a software issue because on stock roms that issue doesn't happen.
King 3D is an 03D rom, so im thinking its something slightly different, perhaps you've cracked it.
I don't know what he did to tweak his Rom.. Probably a memory leak causing it
Sent from my SAMSUNG-SGH-I997 using XDA App
Hello guys,
I am having the same problem as mafiadesi: I HAVE NO PHONE OR MOBILE NETWORK CONNECTIVITY. AND ALSO, MY HOME SCREEN AND ALL THE SCREENS DOES NOT SHOW THE NOTIFICATION BAR.
"1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
This is what I did, I restored my Thrill to the Android 2.2 stock, and then I used this method on
http://forum.xda-developers.com/showthread.php?t=1343915
It worked fine to get to the stock android 2.2.
Then i used his step 23 to install the O3D ROM. It looked okay, but it had no mobile connectivity neither.
"23. Boot into CWM recovery and wipe data/factory reset, wipe dalvik cache, install zip from sdcard, choose zip from internal sdcard, select Rom. Reboot system and enjoy."
I used the GB_P920.zip to get to the O3D rom.
So, I repeated the method to go to new GBP925 using the same method, and like I said, the cellular modem or radio and the notification is not showing.
PLEASE TELL ME WHAT I DID WRONG, AND WHERE I COULD FIND THIS BASEBAND, AND HOW TO INSTALL IT, IF YOU THINK THAT IT IS MISSING.
THANK YOU SO MUCH.
Maybe try the kdz method first.
Sent from my LG-P925 using XDA App
Hi
Thanks for the quick reply. I just tried the KDZ method of this site:
http://forum.xda-developers.com/showthread.php?t=1287236
I used the V21A_00.kdz file ... and I had no error messages that I could noticed,... It finished the upgrade, and then the phone rebooted and stayed on a loop, with teh LG logo and the lg animation... I tried removing the battery and but now it is stuck on this loop boot.
I tried the recovery mode, (Vol - + Power button) and it goes to the Android recovery, and no longer the CWM recovery. The only option now is the to errase all data. But even that option is not available.. the Power button option to say Yes does not respond, so the only option is the pull the battery.
I am stuck.. please help me. any ideas?
I am thinking about going back to Stock 2.2, if i can do that.. i will try it now.

[Q] Update/Upgrade GingerDX on X8

Hello Community,
I've installed a time ago GingerDX v22
on my Xperia X8. Now theres a new Version out (v24).
I wanted to ask if I should update/upgrade the
version on my phone just with the option Install update.zip
or should I do it like the first installation with full wipe and so on...
And if I should the update.zip will it kill my data and my apps installed on?
Thanks for quick answers that will help.
Greets xdix
PS.: Sorry for my bad english if it is bad... xD
------------------------------------------------------------------------
EDIT
------------------------------------------------------------------------
I've just tried it.
At my phone it worked without full wipe.
But but I think not everywhere it will work so fine. But if
you don't want to lose all your data (e.g. apps)
just try it. But without warranty that it will work so...
Re:
xdix said:
Hello Community,
I've installed a time ago GingerDX v22
on my Xperia X8. Now theres a new Version out (v24).
I wanted to ask if I should update/upgrade the
version on my phone just with the option Install update.zip
or should I do it like the first installation with full wipe and so on...
And if I should the update.zip will it kill my data and my apps installed on?
Thanks for quick answers that will help.
Greets xdix
PS.: Sorry for my bad english if it is bad... xD
------------------------------------------------------------------------
EDIT
------------------------------------------------------------------------
I've just tried it.
At my phone it worked without full wipe.
But but I think not everywhere it will work so fine. But if
you don't want to lose all your data (e.g. apps)
just try it. But without warranty that it will work so...
Click to expand...
Click to collapse
You don't need to make full wipe if you are just updating the version of the ROM. If you are changing the ROM, then a full wipe is needed.
Can you please tell me how it's working, cuz im on GingerDX v022 and i wanna try v024

Warning cm9/cwm bricks (Spam/solutions/support thread)

hello everyone,
please post the problems here i try everything to get you guys out of trouble!
do not spam the cm9 thread spam here
i read sometimes here since today that some users had brick there tablet by installing the new cwm 6.0.1.2 or the CM9
the problems are:
# cwm version broken
# the 3.1 kernel is broken
after you have flashed one of these things your tab will stay black!
we still sourcing for a solution
kallt_kaffe's tab is also bricked lucky my tab is still alive!
very sadly for alk the peoples that have bricked there tablet and kallt_kaffe good luck i hope you can get your tab up and running again!
#YOU HAVE BEEN WARNED#
support
SUPPORT:
we have not found any working solutions yet as we have found one you will hear from me
maybe this will work: http://forum.xda-developers.com/showpost.php?p=31166314&postcount=3
or this maybe: http://forum.xda-developers.com/showthread.php?t=1478361
ALWAYS FEEL FREE TO PM ME!
or message me:
[email protected]
[email protected]
you might want to change the title.
bricks brick support? lol
would be great it getting bricked would get bricked and bricking your tab would no longer be "supported"
pseudoheld said:
you might want to change the title.
bricks brick support? lol
would be great it getting bricked would get bricked and bricking your tab would no longer be "supported"
Click to expand...
Click to collapse
haha yes im using swype on my tablet so there went something wrong i think
CHANGED!
i flashed the latest error prone cwm and luckily didn't have any issues. now im contemplating flashing back the old one 6.0.0.8 i think but i don't want to risk getting a brick whilst flashing back the old cwm.
does the brick only occur when formating something? is there any further info on that.
i think i will just keep my tab running as it is for the time being until there really is the need to flash sth (ie ics 7300 coming out) then i will try and go back to the old cwm
pseudoheld said:
i flashed the latest error prone cwm and luckily didn't have any issues. now im contemplating flashing back the old one 6.0.0.8 i think but i don't want to risk getting a brick whilst flashing back the old cwm.
does the brick only occur when formating something? is there any further info on that.
i think i will just keep my tab running as it is for the time being until there really is the need to flash sth (ie ics 7300 coming out) then i will try and go back to the old cwm
Click to expand...
Click to collapse
you can just flash back from 6.0.1.2 i have also done that now running on 6.0.0.8!
now i need some sleep see ya tommorow guys!
i have problem after using cm10 preview and the cmw from kallt_kaffe thread , it's probably cmw that caused the problem because JB was running smooth without any issues but when i tried to restore the stock HC the cmw stuck for some time but i was able to return back to HC .
after this the device was lagging a lot and couldn't enter cmw again the screen was black but the device still wasn't dead , i managed to turn it off and reboot it again and used it for two days before it's completely dead and connects only as APX device, i will try you the first method you posted and post back here .
there also this method form tab 10.1 sections for the unlocked devices: http://forum.xda-developers.com/showthread.php?t=1130574]
my device is locked and can't Bass (rcm version 0x4) error . so if there is anyone can help figuring out or providing the secure boot key for the locked devices that will be great .
Im not really sure what makes this bugs happen..
But this issues is not new for me in galaxyNOTE gt n7000 and Sgs2 I9100 we call this as EMMC superbrick..
It happen in ICS kernel stock if you operates some EMMC_CAP_ERASE in kernel such as wiping your data or system.. Format.. Or deleting large file in recovery operation or factory reset in EMMC with firmware revision 0x19(firmware of this chip)..
It cannot recover with regular utility like JTAG coz This superbrick makes EMMC faulty in /data partition or /system partition blocks..
If you go to Samsung Service Centre.. Your device should be on mainboard replacement..
Sorry for my english.. You could use this app for testing your emmc has a bug or not..
If you had the emmc bug.. Dont use any recovery from ICS sources until someone with expert knowledge confirm that everything is fine..
Please read this thread for complete issues and discuss..from recognized developer entropy512
http://forum.xda-developers.com/showthread.php?t=1633938
Edit:
After testing i got my EMMC had a bugs warning from chainfire got brick bug app...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tested my tab apparently it got the bug too. So, have anyone know what the problem exactly? Is it the ICS kernel or CWM which causing the brick?
---------- Post added at 02:26 AM ---------- Previous post was at 02:21 AM ----------
Is it safe to flash KK's CM10 ROM cause it still using GB kernel? And what CWM version to use for flashing? I know CWM versions 5. cannot use to flash CM10. Thanks
nexus_g said:
I've tested my tab apparently it got the bug too. So, have anyone know what the problem exactly? Is it the ICS kernel or CWM which causing the brick?
---------- Post added at 02:26 AM ---------- Previous post was at 02:21 AM ----------
Is it safe to flash KK's CM10 ROM cause it still using GB kernel? And what CWM version to use for flashing? I know CWM versions 5. cannot use to flash CM10. Thanks
Click to expand...
Click to collapse
Use CWM 6.0.0.8 NOT CWM 6.0.1.2!
You still have the 2.6.36.4.... Kernel Yes I know You can just upgrade to cm10 no problem!
nexus_g said:
I know CWM versions 5. cannot use to flash CM10. Thanks
Click to expand...
Click to collapse
I can't recall reading that before... What happens if you would do so?
Kallt_kaffe is currently recommending 6.0.0.8, post 2 of cm9 thread.
I heard of changes in the nandroid backup file structure in 6.x that I don't like, personally, but that's IMHO I'm still on 5.1 because the menu structure of 5.5.0.4 is incomplete (e.g. no shutdown)
fred_be9300 said:
I can't recall reading that before... What happens if you would do so?
Kallt_kaffe is currently recommending 6.0.0.8, post 2 of cm9 thread.
I heard of changes in the nandroid backup file structure in 6.x that I don't like, personally, but that's IMHO I'm still on 5.1 because the menu structure of 5.5.0.4 is incomplete (e.g. no shutdown)
Click to expand...
Click to collapse
From what I remember from the cm10 or AOSP JB thread, somebody tried to use cwm 5. to flash cm10 and he was getting error massage and cwm won't let it flash. That is why persoot and KK recommend cwm 6.
Could someone confirm using the good old CWM 6.0.0.8 or below and has flash ICS kernel and do wipe recover and survive the brickbug? Thanks.
safariking said:
you can just flash back from 6.0.1.2 i have also done that now running on 6.0.0.8!
now i need some sleep see ya tommorow guys!
Click to expand...
Click to collapse
Could you tell us what is the best way to flash back to CWM 6.0.0.8? Do you use cwm 6.0.1.2 or Odin? Thanks
nexus_g said:
Could you tell us what is the best way to flash back to CWM 6.0.0.8? Do you use cwm 6.0.1.2 or Odin? Thanks
Click to expand...
Click to collapse
I have flashed CWM 6.0.0.8 from 6.0.1.2!

I9000 still useable?

Hi,
About a year ago I bought my wife an i9000 off ebay. It is the UK unlocked version. It came with the stock rom. I rooted it and have installed various different roms over the year. At first, the phone was fine, but its gradually got slower and now, it's almost unusable. The phone constantly lags, hangs, crashes etc. It drives the wife up the wall and I get it in the neck.
I finally decided to go back to the last official gingerbread rom to see if that would help (XXJVU), but its the same.
I am starting to think that the phone simply isn't powerful enough to run today's versions of the apps a smartphone should be able to run. Her list of 'must have' apps, on top of what's installed as standard is as follows:
Apps that will run in the background:
Facebook app and widget
accuweather app and widget
BBC news app and widget
stock calander widget
viber
Apps that will be opened and closed:
skype
memoires diary app
adobe reader
google translate app
samsung mobile print app
CTK (Czech news app)
Is this list of apps excessive? Should an i9000 be able to run today's versions of these apps without any problems? A lag here and there won't bother her, it's the freezing and crashes that drive her crazy.
If the above should be possible, could someone recommend a ROM or ROM/kernel combo that would work? I don't care if its stock or custom, or what version of android it is, I just want the phone not to freeze.
Thanks
kingkevbo said:
Hi,
About a year ago I bought my wife an i9000 off ebay. It is the UK unlocked version. It came with the stock rom. I rooted it and have installed various different roms over the year. At first, the phone was fine, but its gradually got slower and now, it's almost unusable. The phone constantly lags, hangs, crashes etc. It drives the wife up the wall and I get it in the neck.
I finally decided to go back to the last official gingerbread rom to see if that would help (XXJVU), but its the same.
I am starting to think that the phone simply isn't powerful enough to run today's versions of the apps a smartphone should be able to run. Her list of 'must have' apps, on top of what's installed as standard is as follows:
Apps that will run in the background:
Facebook app and widget
accuweather app and widget
BBC news app and widget
stock calander widget
viber
Apps that will be opened and closed:
skype
memoires diary app
adobe reader
google translate app
samsung mobile print app
CTK (Czech news app)
Is this list of apps excessive? Should an i9000 be able to run today's versions of these apps without any problems? A lag here and there won't bother her, it's the freezing and crashes that drive her crazy.
If the above should be possible, could someone recommend a ROM or ROM/kernel combo that would work? I don't care if its stock or custom, or what version of android it is, I just want the phone not to freeze.
Thanks
Click to expand...
Click to collapse
My suggestion is gamerzrom ive been running it and its perfect no freezes or crashes and ive been running much more than you mentioned above. The phone is still going strong
Sent from my GT-I9000 using xda app-developers app
Hi, if u already suitable with flashing, then its easy, GB got really good sense on videos n app but its to buggy to use, Using ram manager n sometimes reboot ur fone will clearing cache so ur fone will be fast again, but only on limited time. Cache will start to bulky n slowing down da fone.
If ur familiar with flashing, then upgrading ur fone to ICS or JB is wise decision. As 4.x Android have a good ram manager n easy to use, and did say, clearing cache would be good but sometimes check ur internal sd if it get too bulky. Insufficient space will makes operation apps to became failure as app need space to launch either in RAM or sd.
and still, if ur fone still became lag or slow, after upgrading, i suggest u use some script available here in XDA to make ur fone systems manageble like supercharger or fly on script.
but be xtra careful and read carefully before doing something. Doesnt want to risk bricking ur fone rite, so Good Luck
darkknigh_t said:
My suggestion is gamerzrom ive been running it and its perfect no freezes or crashes and ive been running much more than you mentioned above. The phone is still going strong
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
And hi Mr darkknigh_t
it seems u really infatuated with GamerzROM, seen ur suggesting everyone to use it. :cyclops:
well try to break my high stock JB antutu score with my own modification : see pic
ruandic candidate
compacity said:
And hi Mr darkknigh_t
it seems u really infatuated with GamerzROM, seen ur suggesting everyone to use it. :cyclops:
well try to break my high stock JB antutu score with my own modification : see pic
Click to expand...
Click to collapse
Thanks for your replies.
So what is your modification?
Juz choose any custom ROM in dev section, as for me, i juz using nightlies with supercharger and script by slaid, thats all, but really, da post before juz for jokin, and if u wanna to gain it, u need to OC ur fone.
There are tons of quite dependable custom ROM out there, try every one of it. as i also do da same before. and decide it on ur own
compacity said:
Juz choose any custom ROM in dev section, as for me, i juz using nightlies with supercharger and script by slaid, thats all, but really, da post before juz for jokin, and if u wanna to gain it, u need to OC ur fone.
There are tons of quite dependable custom ROM out there, try every one of it. as i also do da same before. and decide it on ur own
Click to expand...
Click to collapse
Ok, I've installed the latest slim bean, and I want to try the mods you suggested above. Could you explain what you've installed from slaid and supercharger?
Have you patched services.jar?
It all looks a bit complicated to me..
Thanks.
compacity said:
And hi Mr darkknigh_t
it seems u really infatuated with GamerzROM, seen ur suggesting everyone to use it. :cyclops:
well try to break my high stock JB antutu score with my own modification : see pic
Click to expand...
Click to collapse
Its known that antutu scores and any benchmark scores mean nothing the performance shows in games. Benchmark scores change if you make 50 tests itl be always different .
Yes i suggest gamerzrom because it has everything in one package no scrips needed. The dev tried everything out and used only the best in his rom and so far its flawless
Sent from my GT-I9000 using xda app-developers app
GamerzRom it's closed at the moment.
I haven't tried it so I can't comment on it's performance.
I've flashed countless Roms and in my experience I'm most satisfied with C-RoM Mix.
Sent from my GT-I9000
GrippingSphere said:
GamerzRom it's closed at the moment.
I haven't tried it so I can't comment on it's performance.
I've flashed countless Roms and in my experience I'm most satisfied with C-RoM Mix.
Sent from my GT-I9000
Click to expand...
Click to collapse
New version is comming out soon and a new thread will be made
Sent from my GT-I9000 using xda app-developers app
haha, maybe i ll try ur suggestion and try ur recommendation.
---------- Post added at 11:42 PM ---------- Previous post was at 11:12 PM ----------
kingkevbo said:
Ok, I've installed the latest slim bean, and I want to try the mods you suggested above. Could you explain what you've installed from slaid and supercharger?
Have you patched services.jar?
It all looks a bit complicated to me..
Thanks.
Click to expand...
Click to collapse
if u choose GB, just go here http://forum.xda-developers.com/showthread.php?t=2273317 and choose any 2 attached link (CM or Stock (not both) ) then choose what Ram Manager u wanna use and copy it to internal sd. Boot to recovery and flash RAM MANAGER first, then da Fly On script after. Reboot. Thats all.
If u from ICS/JB Rom (custom or stock)
Hav u rooted? Root first and update ur superuser binary. And ur chosen rom must have kernel that support init.d (see if u got init.d folder in /system/etc/ thats all. or juz ask ur ROM dev
1. Download script manager from GPlay
2. Download this script (.sh) http://forum.xda-developers.com/attachment.php?attachmentid=1200973&d=1342401278 and dont change anything. Save da script inside root of internal sd
3. Go here http://forum.xda-developers.com/showthread.php?t=2273317 and download da 1 of 2 last attachment (choose it, CM or STOCK depend on ur ROM. Most custom rom based on CM Nightlies)
4. Choose any RAM Manager u wanna used (for me its hard multitasking)
5. save it at da root of ur internal sd.
6. Run script manager and choose da script from supercharge RC10, dont forgot to tick da skull (permission from superuser).
7. Read carefully da instruction in script manager. As it will tell u everything, u can choose no for all except da one that change ur services.jar, click yes for it.
8. After da script done, it will ask u to reboot. Juz say no and it will come back to da main menu, Now u can choose again of 34 option (maybe got more option, i juz forgot about it) from script. Juz see da option to unsupercharger and choose it (coz u just want it to patched da services.jar, not to use da supercharge. Only RC10 have da option to alter da services.jar quite easily or if u wanna da hard way, see here : http://forum.xda-developers.com/showpost.php?p=16635544&postcount=2 )
9. Follow any of da instruction. , it juz wanna to revert back to normal, except for da services.jar
10. Reboot. Now u hav alter ur services.jar.
Now reboot to recovery, wipe cache and dalvik cache.
1. In recovery, choose to install zip, dan choose RAM MANAGER first.
2. After it done, choose da fly on script and flash it.
3. Reboot after it done.
in case of update da script,
1. delete da RAM Manager in /system/etc/init.d and delete file named ram_manager. (or if ur recovery got option to clear init.d juz pick it.)
2. Reboot to recovery and as usual, repeat da above instruction (juz for da script, altering services.jar already been done) and dont forget, any changes must be followed by wiping cache.
thats all and if in case u dont hav guts to try, dont do it.
Wow. Thanks for the detailed instructions!
I have followed them and done everything you said. The phone seems to run a lot smoother now. I just hope that it stays that way and doesn't start to slow down after time.
The slim rom comes with the semaphore kernel which does not seem to have the ability to overclock. Can I install a new kernel with that rom to enable overclocking?
Thanks
Semaphore can overclock the system. However it needs it's own app - semaphore manager. With that app you'll get a few nifty features on top so it's worth downloading anyway.
find semaphore manager from stores
however, any circumstances occur over OC will not be my reeponsibilities.
Sent from my GT-I9000 using xda app-developers app
screenlock on i9000 and way forward
Hi guys,
cool to see there are still some SGS activities going on with that device. Since I have my GNEX I did not look at my SGS anymore.
So, had it in my hands yesterday and thought about updating it.
Problem I have is: I can not access the phone anymore because I dont remember the screenlock anymore (numbers) ;-(
The phone is fully rooted and unlocked with a
Darky Rom and
Dark kernel
Via the lockscreen I can boot to Recovery (CWM) or Download mode (as well as via the buttons of course)
Question: is there a similar tool like the Galaxy Nexus Toolkit for backing up or do a nandroid with the SGS?
I guess I have 2.3.x version running currently.
Well the external SD i backuped already - but I am afraid there is still some stuff i would like to get before wiping..
Would be great if you could help me out.
Br Wakonda
Lol man, you can't use official Facebook app on the phone, It's the slowest s*it ever made . Use m.facebook.com in browser, or any alternative Facebook client instead, official Facebook app kills all the performance .
Install GamerzROM, delete the MORPH folder from the .zip file BEFORE installation. Do NOT restore any apps using TitaniumBackup or similar. If your phone gets too slow, use Clean Master to clean the cache, that helps too (use especially this app!). Do NOT use custom launcher, use Xperia launcher, which is pre-installed in GamerzROM, it's really fast . Do NOT install any additional performance tweaks, because the best ones are pre-installed in GamerzROM.
My phone is blazing fast with these settings, hope I helped . BTW také jsem z České Republiky, zdravím
Edit: I just noticed that there ain't no download link for GamerzROM 3.0, so you can just wait for the next release .

Xperia X8 wi-fi not working(JB Mini Project)

Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
so noone knows nothing in here?thats sweet
SrSGr said:
so noone knows nothing in here?thats sweet
Click to expand...
Click to collapse
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
use back stock ROM (just kidding
CKKnot said:
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
Click to expand...
Click to collapse
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With a few words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
SrSGr said:
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With little words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
Click to expand...
Click to collapse
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
CKKnot said:
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
Click to expand...
Click to collapse
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
SrSGr said:
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
Click to expand...
Click to collapse
Replied. It because I forgot to mention that 06 has a little bit changes that will make normal jb rom that is not released pior to the kernel release data will not boot
SrSGr said:
Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
Click to expand...
Click to collapse
hey i had same problem with jbmp when i used jbmp kernel but when i flashed with nAa jb 05 kernel it worked fine..

Categories

Resources