[Q] Cannot update to Gingerbread - LG Revolution

Hey everyone. I rooted my phone a while back (around June), but it got unrooted during the update in July and I haven't bothered rooting it again. But now, when I try to update to Gingerbread, I always get a message saying "Update failed or incomplete" after downloading and rebooting. I noticed I still have SuperUser installed, so I tried unrooting with SuperOneClick, but SuperOneClick is stuck on "Waiting for Device". I have also tried to reset to factory settings, with the same result. Does anyone know how to fix this? Thanks.

rawrzar said:
Hey everyone. I rooted my phone a while back (around June), but it got unrooted during the update in July and I haven't bothered rooting it again. But now, when I try to update to Gingerbread, I always get a message saying "Update failed or incomplete" after downloading and rebooting. I noticed I still have SuperUser installed, so I tried unrooting with SuperOneClick, but SuperOneClick is stuck on "Waiting for Device". I have also tried to reset to factory settings, with the same result. Does anyone know how to fix this? Thanks.
Click to expand...
Click to collapse
You may not have updated like you thought. V6 should have gotten rid of root for you. I had to do a factory restore, wipe the data and image, all of it. When I went back to do all that stuff, I still had the Bionic splash screen, and it is because of that little change, that I was not able to update myself. You may have something similar going on with your phone, just in a different place. Anything beyond doing that, just ask, but it should take care of you. Make a backup first, just in case. You will have to set everything up again.

markapowell said:
You may not have updated like you thought. V6 should have gotten rid of root for you. I had to do a factory restore, wipe the data and image, all of it. When I went back to do all that stuff, I still had the Bionic splash screen, and it is because of that little change, that I was not able to update myself. You may have something similar going on with your phone, just in a different place. Anything beyond doing that, just ask, but it should take care of you. Make a backup first, just in case. You will have to set everything up again.
Click to expand...
Click to collapse
Thanks for your reply. I have performed a factory reset, but the update still fails. I also notice that after the reset, SuperUser is still listed under my installed apps.

rawrzar said:
Thanks for your reply. I have performed a factory reset, but the update still fails. I also notice that after the reset, SuperUser is still listed under my installed apps.
Click to expand...
Click to collapse
Does the update fail, or does it just say no update available?
Sent from my VS910 4G using xda premium

mtmichaelson said:
Does the update fail, or does it just say no update available?
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
It fails. the update downloads, and reboots to install. But about half way through the installation, the phone reboots again. when the home screen comes up, a screen pops up saying "update failed or incomplete".

I had the same problem. Did you reinstall the stock recovery program? I also had the bionic boot image from revolt1.5, which was messing things up. Once I reverted back to the stock boot image, the update went through.

JohnnyAn said:
I had the same problem. Did you reinstall the stock recovery program? I also had the bionic boot image from revolt1.5, which was messing things up. Once I reverted back to the stock boot image, the update went through.
Click to expand...
Click to collapse
How would I go about reverting back to stock image? sorry , I don't know much about this.

rawrzar said:
How would I go about reverting back to stock image? sorry , I don't know much about this.
Click to expand...
Click to collapse
The cubed had a stock revo file that he posted somewhere in the dev forum. Just flash that with CWM and you should be good to go.
Sent from my VS910 4G using XDA App

I am in a similar situation but when I try to update to gingerbread it says there is no update available. I too still have supreuser installed after reflashing from revolt 1.5 to thcubed zv4 rooted stock and then updating its to zv6. How can I get my phone to download zv7?
Sent from my VS910 4G using XDA App

jdleider said:
I am in a similar situation but when I try to update to gingerbread it says there is no update available. I too still have supreuser installed after reflashing from revolt 1.5 to thcubed zv4 rooted stock and then updating its to zv6. How can I get my phone to download zv7?
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
Apparently the update hasn't been pushed to all phones yet...there's several of us on xda that still don't have it. Jackpot08 is working on a .tot but until then, we just have to wait.
Some people have called Verizon and they can't force the update to your phone, so don't bother with that.

JohnnyAn said:
The cubed had a stock revo file that he posted somewhere in the dev forum. Just flash that with CWM and you should be good to go.
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
Thanks! Found it and got it working. Just waiting for the update now.
jamRwoo said:
Apparently the update hasn't been pushed to all phones yet...there's several of us on xda that still don't have it. Jackpot08 is working on a .tot but until then, we just have to wait.
Some people have called Verizon and they can't force the update to your phone, so don't bother with that.
Click to expand...
Click to collapse
Thanks for the info, guess the update hasn't been pushed to my phone yet.

I have been on stock for a week now, and its been horrible. I forgot how slow this was before devs streamlined the system, and how many rooted apps/functions I used.
I am going back to revolt today. I will see GB when the .TOT is available.

rawrzar said:
Hey everyone. I rooted my phone a while back (around June), but it got unrooted during the update in July and I haven't bothered rooting it again. But now, when I try to update to Gingerbread, I always get a message saying "Update failed or incomplete" after downloading and rebooting. I noticed I still have SuperUser installed, so I tried unrooting with SuperOneClick, but SuperOneClick is stuck on "Waiting for Device". I have also tried to reset to factory settings, with the same result. Does anyone know how to fix this? Thanks.
Click to expand...
Click to collapse
Were you attempting to update to gingerbread by using the TOT? Or was there an update available though your service provider?
If you were getting a failure through the network, it's likely because you haven't gone back to stock recovery and still have ClockWorkMod Recovery installed. Use DevToolKit to fix this.
If you are using the TOT and getting a failure, do a checksum on the TOT file.

I've been working on this actively as I have a revolution. LG has informed me the update push completed on November 2. Nobody at VZW or LG can tell me why some Revolutions haven't gotten the push.
VZW Engineering has apparently been alerted, but LG has been unresponsive to me to-date.
I'm not waiting and putting together a one-package manual update kit, but I do want to give LG and VZW time to give me an update. Thing is, it's been over 72 hours now and there hasn't been one, so my patience is wearing thin.
It's disappointing that LG hasn't responded to any of my inquiries... I'm asking the right people behind the scenes.

hatoncat said:
I've been working on this actively as I have a revolution. LG has informed me the update push completed on November 2. Nobody at VZW or LG can tell me why some Revolutions haven't gotten the push.
VZW Engineering has apparently been alerted, but LG has been unresponsive to me to-date.
I'm not waiting and putting together a one-package manual update kit, but I do want to give LG and VZW time to give me an update. Thing is, it's been over 72 hours now and there hasn't been one, so my patience is wearing thin.
It's disappointing that LG hasn't responded to any of my inquiries... I'm asking the right people behind the scenes.
Click to expand...
Click to collapse
I'm in Rochester NY and never got one. I gave it til 2 days ago and threw on the TOT.

Madert said:
I'm in Rochester NY and never got one. I gave it til 2 days ago and threw on the TOT.
Click to expand...
Click to collapse
Yeah, I'm leaning towards drafting an idiot-proof TOT guide, it's just going to be really upsetting if I have to do that. If this was Apple, and not LG, we wouldn't even have this thread right now.
Option-click .ipk and done... not that Apple would even let ~1-5% of a device "miss" an update.

So, I've confirmed a few things with LG officially:
1) The ZV7 update has not been pulled.
2) LG was not aware of this issue until I reported it.
3) LG is just now starting the process of investigating.
I can't flash a TOT on mine right now, as LG may want to capture my unit for evaluation. I'll know more soon, hopefully by Monday.

Verizon was trying to push an update on me back on the 11th. It was the V6 update, as I was running V4. It failed, and I manually ran the tot through with LGNPST. Since thecubed had posted the V7 tot as well, I ran that through as well.
I probably did not need to go from V4 to V6 to get to V7, but I figured it wouldn't hurt.
But as I said, the only push I had received was on the 11th, well after the 2nd.
As a semi-newbie, it was easier to push the tot on than anything else.

LG Engineering is at least listening... they have agreed to capture my unit and send me a brand new Revolution simultaneously.

antiwesley said:
Verizon was trying to push an update on me back on the 11th. It was the V6 update, as I was running V4. It failed, and I manually ran the tot through with LGNPST. Since thecubed had posted the V7 tot as well, I ran that through as well.
I probably did not need to go from V4 to V6 to get to V7, but I figured it wouldn't hurt.
But as I said, the only push I had received was on the 11th, well after the 2nd.
As a semi-newbie, it was easier to push the tot on than anything else.
Click to expand...
Click to collapse
Did you have clockwork recovery installed when you tried to get Verizon s update
Sent from my gingervolt`ed revolution

Related

[Q] Having issues trying to OTA update?

so i used odin to revert completely back to stock jf6 firmware, everytime i try and update it goes thru the process of updating and stops during reboot at 50 percent and says download failed, can anyone help me troubleshoot this issue. im all ears, thanks in advance...
this seems to be happening to all of us who had been rooted at one point or another
yea this will be my fourth try. this time im going to do a factory reset and sign into the market and see what happens. i wonder if this has something to do with the jf6 zip that all of us are flashing back to....
interesting. ive been seeing a fail message as well but 3-button recovery is working now.
beazie0885 said:
yea this will be my fourth try. this time im going to do a factory reset and sign into the market and see what happens. i wonder if this has something to do with the jf6 zip that all of us are flashing back to....
Click to expand...
Click to collapse
please update us after the factory reset
no go on factory reset hopefully someone will post the zip after they get it to work.
[edit] im on the phone with dumbass at&t customer service right now working my way up to level 3 tech support.
[EDIT again..] he found some errors on their side of things that he just corrected and pushed a new update directly to my phone via OTA.
ouch, live long and prosper and may the force be with you
life2monkeys said:
ouch, live long and prosper and may the force be with you
Click to expand...
Click to collapse
lol, just rebooted and.... fucx... no good still but hes gonna give me a call back in about a half hour.. will rpost then
still a no go, he said to try again tonight when he sends me another update. then again tomorrow, looks like till then, SOL
Can you use File Explorer or USB debug to see if there's an update.zip in /sdcard on your device?
same here. i've tried everything.
Also I should mention that you can cheat the 24 hour system by changing the clock manually to a day later... lol
brunson said:
Can you use File Explorer or USB debug to see if there's an update.zip in /sdcard on your device?
Click to expand...
Click to collapse
i checked and nothing...
having the same problem
Guys.. chill out - the Samsung official announcement said
"An update to improve the Samsung Captivate's GPS performance is now available. Captivate customers will receive a notification on their device that an update is available and will simply need to download the file to update their phone. The updates will be pushed to customers' devices over the next few weeks."
You do not need to check for the update yourself.
not the point. the point is, it is possible to get it now, and it's not working for us rooters :/
Eschmacher said:
not the point. the point is, it is possible to get it now, and it's not working for us rooters :/
Click to expand...
Click to collapse
Well said... I'm not even worried about the jh7 update, we've had that for a while now, I'm more worried about my phone being ABLE to receive updates than anything else.
Sent from my SAMSUNG-SGH-I897 using XDA App
well... i backed up my contacts with kies... i'm going to completely clear everything and go back to stock...
after that i'll re-root. but i'll be sure to use the adb shell to backup the stock kernel...
Its working now for me, I also got the updated failed message and have rebooted my phones several times through the day and just verified on google maps twice that it zoomed in accurately
My phone is rooted and have every setting in ryans lag fix set...oh yeah I got the beast unleashed installed.
Sent from my SAMSUNG-SGH-I897
TheRealXenu said:
Stock rom with update is ready here http://www.megaupload.com/?d=RZXMUXY4
Click to expand...
Click to collapse
From the General section. Good luck all.
cappysw10 said:
From the General section. Good luck all.
Click to expand...
Click to collapse
call me stupid, but how would I go about installing this?

New Bionic owner.

Receiving my Bionic in a day or two.. Should I root the Bionic before I update or update then root? The reason I ask is many times the carriers patch the root methods that are used and after the update they no longer work.
I also noticed the bootloader is still locked down and is this going to be figured out?? Coming from all HTC devices I have noticed the Recovery that is used is a little different then on my Thunderbolt.
The Recovery that is used is in the Android Market and is called the Bionic Bootloader?
I will be doing lot's of reading but my main concern was the new update that has just been pushed out, should I download it before I root??
Thanks,
Vinny
Go Patriots
I am also interested in this exact same question about what to do first. I just bought my wife a bionic and she came from a rooted Fascinate. She keeps asking me why she can't do certain things on her bionic and I have to keep telling her I'll fix it soon lol. Problem is I'm not sure if I should wait for the official update.
I'm definitely going to root because it will be her wifi at home while I'm at work.
Sent from my SHIFTAO5P
Our update process veers of the course of the official update path. We have a method of retaining root known as Forever Root by P3Droid (I believe?). In addition, our bootloader is still locked, but we are petitioning. Hoping for an Atrix type unlock. As for recovery, since we don't have unlocked bootloader, we can't write recovery. The one you see in the market is a paid donation. There is also a free one. This allows you to flash ROM's.
We also have Safestrap for CM7 and ICS, but they are still very early works.
Sent from my DROID BIONIC
I see there is a new official update rolling out and my phone will be delivered tomorrow. Should I root it right away and then download the update through recovery? Coming from a long line of HTC devices I can say that Motorola is all new to me. If I accept the new update I may not be able to root it thru the current methods. Carriers are great at plugging holes. If anyone can point me in the right direction I would appreciate it. Every article I read about the Droid Bionic there are so many different methods I am not familiar with.
Thanks,
Vinny
I was going to buy the razr but I like the idea of a battery I can get at. Both phones have just about the same specs and accessories. The Locked down bootloader really sucks.
I've been researching this question all day at work, shhh lol, and I'm pretty confident I know what to do now.
Those of us who are not rooted and have not accepted the new update will need to root first using the forever root method developed by the droidtheory crew. Then after we are rooted we can update to the newest ota and still maintain root. We will also be able to flash whatever rom we would like.
This is what I am going to do to my wife's bionic so hopefully I don't screw up! Someone correct me if I am wrong.
Sent from my SHIFTAO5P
Well I got it rooted fine, but I can't get the update to show up. I've rebooted 3 times so far and nothing. I'm currently making a nandroid backup of the complete stock rom. I'm hoping the update just hasn't rolled out yet to the South Dakota area.
Sent from my SHIFTAO5P
I was finally able to get the update. I rebooted into cwm and cleared data/factory reset. Rebooted and the update showed up. The update went smoothly and I was able to keep root. Flashed droidtheory's kinectix rom and everything is perfect now.
Word of caution: Do not format system in cwm and then try to use the reboot recovery option. It will soft brick your phone! Luckily it was very easy to fix, but it still scared the bejesus outta me!
Sent from my SHIFTAO5P
I would follow the steps you stated. follow this link and it works just fine. Be completely stock and should have no issues. Make sure to download the Blur to your SD card.
http://forum.xda-developers.com/showthread.php?t=1327537

Official Motoblur ICS for the Droid 4 possibly leaked

Just saw this thread at droidforums: http://www.droidforums.net/forum/droid-4-roms/208767-stock-motoblur-ics-droid4.html
Can anyone confirm if this is legit?
EDIT: Removed link to the update file for everyone's safety. This is not an update you want to install. It will take you off the update path and attempting to flash one of the currently available fastboot files will result in a brick.
I pulled the same thing by the cake method earlier today but was afraid to flash a unknown.
I tried, based on the instructions on the page, and as usual, cheesecake won't work for me. I get the "account needed" prompt. I'll try again tomorrow.
Thanks!
I'm downloading it now. I hope this works with Safestrap and I get to keep root. Or at least be able to re-root again. Have to be carefull. Need GSM to work
The day after I sold my T-Mo Sensation, and the day before I get my VZW Droid 4. Looks like the gods have decided not to smite me today.
Booted Safestrap. Flashed stock 215.
Can't update to 219 So no wonder I couldn't update to ICS... Here I go again...
It sounds like a couple of people over on DroidForums HAVE gotten this to load. To paraphrase what hashcode said over there, be very very careful with this guys. There are quite a few Razr owners now stuck outside of the upgrade path and unable to use fastboot to restore after flashing an ICS leak. I think I am going to hold off on this one personally. What I am REALLY hoping to see is some improvements to CM9, AOKP, and Gummy come out of this. Particularly the data issues.
Trying it the Cheesecake way and its downloading. Anyone tried it yet? Curious if Safestrap survived. As long as it works I'll be glad. Hope the different baseband fixed audio over UMTS/HSDPA.
Die Bruine said:
Trying it the Cheesecake way and its downloading. Anyone tried it yet? Curious if Safestrap survived. As long as it works I'll be glad. Hope the different baseband fixed audio over UMTS/HSDPA.
Click to expand...
Click to collapse
You are a brave man Try using OTA RootKeeper. It worked with the last update. I would be very interested to see if it works with the ICS update as well.
Ok guys, I installed it. Voodoo OTA RootKeeper did NOT work for me, and attempting to flash the 6.13.219 fastboot file resulted in a brick.
I would strongly advise not installing this update.
SGMD1 said:
Ok guys, I installed it. Voodoo OTA RootKeeper did NOT work for me, and attempting to flash the 6.13.219 fastboot file resulted in a brick.
I would strongly advise not installing this update.
Click to expand...
Click to collapse
Really sorry to hear that. Thanks so much for the information though. Did you try the .215 fastboot file? I'm guessing the result would be the same but might be worth a shot.
Can you tell us why you tried to install the fastboot file? You didn't like ICS or is it because of root priviliges? I've tried like 15 times. It just won't update. So now I temp unrooted, uninstalled Safestrap and hope for the best. Next step woul be to fastboot 219 and try on a fresh clean install. The only thing I can think of is that my build.prop gets in the way. Anyone mind posting a stock .219 build.prop?
XDA app on XT894
kwyrt said:
Really sorry to hear that. Thanks so much for the information though. Did you try the .215 fastboot file? I'm guessing the result would be the same but might be worth a shot.
Click to expand...
Click to collapse
Downloading .215 as we speak, but I'm not getting my hopes up. No big deal though, VZW is overnighting me a warranty replacement and I've got an old phone I'm using for the day.
EDIT: .215 failed at 6/18 as well.
Die Bruine said:
Can you tell us why you tried to install the fastboot file? You didn't like ICS or is it because of root priviliges? I've tried like 15 times. It just won't update. So now I temp unrooted, uninstalled Safestrap and hope for the best. Next step woul be to fastboot 219 and try on a fresh clean install. The only thing I can think of is that my build.prop gets in the way. Anyone mind posting a stock .219 build.prop?
Click to expand...
Click to collapse
There were a several things with this ICS build that were a bit disappointing (native ICS screenshot function didn't work, no "Charge only" mode when connected via USB to PC) but no root access was the dealbreaker. I knew flashing the .219 file was a risk based on what happened with the RAZR ICS leaks but I just figured I'd be the guinea pig
I had the same problem you did when attempting to install it, so I flashed the clean .219 fastboot file and then the ICS update was successful.
build.prop
Die Bruine said:
Can you tell us why you tried to install the fastboot file? You didn't like ICS or is it because of root priviliges? I've tried like 15 times. It just won't update. So now I temp unrooted, uninstalled Safestrap and hope for the best. Next step woul be to fastboot 219 and try on a fresh clean install. The only thing I can think of is that my build.prop gets in the way. Anyone mind posting a stock .219 build.prop?
XDA app on XT894
Click to expand...
Click to collapse
Here is the build.prop file... it is compressed into a zip archive since .prop cannot be attached.
****EDIT: THIS IS THE .215 build.prop
build.prop 219
rumgool said:
Here is the build.prop file... it is compressed into a zip archive since .prop cannot be attached.
****EDIT: THIS IS THE .215 build.prop
Click to expand...
Click to collapse
Okay... here is the 219 build.prop zipped
You gotta be kidding me pffffff. Those guys at Motorola check eeeeeeverything. Thnaks for the build.prop btw rumgool. But now it hangs on Motorola_XT894....3gp. Unbelievable...
Finally got it going. But like you said, had to flash SBF. That's some pretty scary **** . I'm used to Milestone / Droid 1 flashing and I've flashed a Razr before. This one takes twice as long. So for you wanting to flash SBF, don't be alarmed. It takes a while, a very loooong while.
Question: Why would the update prevent flashing via fastboot? I'm only familiar with SBFs, but the point of those were that no matter how bad things got, you could wipe everything out and start over. Is that no longer the case
GSM working!!!!!!
Yes!!!! audio over 3G GSM!!!!
Finally. Don't know what works and what doesn't. But audio works and you have GSM settings right from the get go. Now I'm gonna eat, then I'm gonna play and after that I'll tell you what I think of it.
Thanks guys!
podspi said:
Question: Why would the update prevent flashing via fastboot? I'm only familiar with SBFs, but the point of those were that no matter how bad things got, you could wipe everything out and start over. Is that no longer the case
Click to expand...
Click to collapse
The new fastboot files are nothing like the old sbf's. Wrong radio, different build number and many other things can cause it to fail. Then your stuck in fastboot mode with a soft brick.
Sent from my DROID4 using Tapatalk
This is a really nice build! I am not at all sorry to have risked being stuck, to be honest.
Everything appears to work very well so far and I am posting from Chrome Beta.
Still looking for the downside...

Safestrap won't open after install

I've been following the guide here to flash Jelly Bean onto my Atrix HD, so I could next flash the Batakang ROM as the guide recommends. I got Jelly Bean onto the device, but after I install Safestrap and try to open it, it immediately displays "Unforuntately, Safestrap has stopped working" and closes itself. I think I installed the right version (the one for Razr HD, tried both 3.04 and 3.05. I think it works with the Atrix HD as well). Voodoo OTA shows that all checkboxes under Status are checked, so I don't think it's a root issue.
I did a search for Safestrap and I didn't really see anything related to my problem. I'm kinda at a loss here. Maybe I got a bad flash and need to redo everything?
redphazon said:
I've been following the guide here to flash Jelly Bean onto my Atrix HD, so I could next flash the Batakang ROM as the guide recommends. I got Jelly Bean onto the device, but after I install Safestrap and try to open it, it immediately displays "Unforuntately, Safestrap has stopped working" and closes itself. I think I installed the right version (the one for Razr HD, tried both 3.04 and 3.05. I think it works with the Atrix HD as well). Voodoo OTA shows that all checkboxes under Status are checked, so I don't think it's a root issue.
I did a search for Safestrap and I didn't really see anything related to my problem. I'm kinda at a loss here. Maybe I got a bad flash and need to redo everything?
Click to expand...
Click to collapse
Try downloading safe strap again maybe you had a bad download.
Sent from my MotoAHD
Update superuser and binary
Sent from my MB886 using Tapatalk 2
Youngunn2008 said:
Try downloading safe strap again maybe you had a bad download.
Sent from my MotoAHD
Click to expand...
Click to collapse
SirHoover2010 said:
Update superuser and binary
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Updating Superuser and binary fixed it. I thought I had done that already, so I didn't think to try that. I feel kinda stupid now.
Thanks to both of you for your help.
Don't I did the same thing and got kinda mad for about 10 min till I checked that lol
Sent from my MB886 using Tapatalk 2
lost root
Had same problem and tried to up date Su Binary and lost root. Need Help. I am on ota 4.1.1 it said su has stopped and have not had root since. Any ideas?
fullpozzy said:
Had same problem and tried to up date Su Binary and lost root. Need Help. I am on ota 4.1.1 it said su has stopped and have not had root since. Any ideas?
Click to expand...
Click to collapse
You have voodoo ota root keeper with a backup of su? I'd restore root with that then make sure superuser is updated and move it to system/apps then update binary
Sent from my MotoAHD
Tried using voodoo and no success. Voodoo shows phone as rooted and have a back up of root, but doesn't have root access and no way of accessing back up of root. I can hit temp unroot but nothing happens. Any other suggestions?
I'm having this same issue with my Galaxy S4, build NC5. I rooted using Towelroot v3, then installed Safestrap (JFLTEVZW-3.71). Everything seemed to be working fine, I installed the recovery, rebooted, and now I can't open the app. This is frustrating because I decided I would rather use a different recovery, and want to remove Safestrap. I can get into recovery on boot, but no matter what I do the app won't open. SuperSU/binary seems to be up to date. Any ideas?
ahouse3733 said:
I'm having this same issue with my Galaxy S4, build NC5. I rooted using Towelroot v3, then installed Safestrap (JFLTEVZW-3.71). Everything seemed to be working fine, I installed the recovery, rebooted, and now I can't open the app. This is frustrating because I decided I would rather use a different recovery, and want to remove Safestrap. I can get into recovery on boot, but no matter what I do the app won't open. SuperSU/binary seems to be up to date. Any ideas?
Click to expand...
Click to collapse
I doubt you're having the same issue, because you have a completely different phone than the one contained within this thread. You posted your question in the forum for the Motorola Atrix HD.
Seeing as this is your first post, I will simply refer you to here: http://forum.xda-developers.com/galaxy-s4-verizon
Good luck over there.
quasihellfish said:
I doubt you're having the same issue, because you have a completely different phone than the one contained within this thread. You posted your question in the forum for the Motorola Atrix HD.
Seeing as this is your first post, I will simply refer you to here: http://forum.xda-developers.com/galaxy-s4-verizon
Good luck over there.
Click to expand...
Click to collapse
Sorry, I didn't think this sounded like a device-specific issue, and this was the only thread anywhere that seemed to address it. But anyway thanks for showing me the ropes . I ended up fixing it by changing SELinux from enforcing to permissive (I had done this to install Safestrap, but then it reverted back). Problem solved!
ahouse3733 said:
Sorry, I didn't think this sounded like a device-specific issue, and this was the only thread anywhere that seemed to address it.
Click to expand...
Click to collapse
Right, but you also should have noticed that the last post was back in December 2012. That's because the Atrix HD later had its bootloader unlocked, thus negating the need for anything Safestrap related on this phone. So if you really needed help, it's unlikely that anyone here would be able to help you, because no one is using Safestrap anymore. Which is why I was trying to steer you towards someone that could actually help.
Just another reason to use the correct forum. Otherwise, glad you figured it out.
I know this may be the wrong section.. But do u by any chance still have the safestrap apk because all of the downloads are bad now and I can't find one anywhere on the internet . I really need it.. My computer quit working so I can't unlock the bootloader right now.. I just need an easy recovery because I want to use xposed but I need recovery in case anything goes wrong. Any help will be appreciated

I have no ota updates anymore

Just curious if any one else is having this issue. While testing zvb rom, cwm corrupted my system folder and cwm would not format/mount it. System would not boot. Could not flash anything that wrote to the system folder. Would not boot so I couldn't flash a tot, normally. Had to flash in emergency download mode. Now everything is fine except that I can't get any ota's. it keeps saying that there is no ota available, that my system is up to date.
Just wondering if anyone that has used emergency download mode then tried to ota, is having this issue.
Not me. That's helpful, right?
I un-rooted and un-CWMed (by resetting the executable bit on install-recovery.sh), so I was, theoretically, stock zv9. I could download the OTA (for the, like, millionth time), but it wouldn't install. Finally I dusted off Windows and did the normal TOT, and then was able to OTA to zvb.
OrangeJoe said:
Not me. That's helpful, right?
I un-rooted and un-CWMed (by resetting the executable bit on install-recovery.sh), so I was, theoretically, stock zv9. I could download the OTA (for the, like, millionth time), but it wouldn't install. Finally I dusted off Windows and did the normal TOT, and then was able to OTA to zvb.
Click to expand...
Click to collapse
I'm just curious if anyone else is having or had (previous revo owners) this issue. Nothing more. I couldn't get my phone to boot, therefore, I couldn't flash the v8 tot normally. I had no choice but to use 'emergency download mode'. Doing so, put me in 'test mode'. Once getting out of test mode, I get the "No software update available".
No biggie. OG ZVB runs absolutely flawless on v8. But if there is a way to get back to zvb, then I'm game. I would like to run OG ZVB on zvb Only seems appropriate
I.M.famous XMAN said:
I
No biggie. OG ZVB runs absolutely flawless on v8. But if there is a way to get back to zvb, then I'm game. I would like to run OG ZVB on zvb Only seems appropriate
Click to expand...
Click to collapse
Just curious: how much zv8 is left behind when you flash OG ZVB?
I pm'd you yesterday or the day before about maybe getting zvb back, in case you didn't see it.
OG ZVB is just the software part of ZVB. I'm trying to figure out how to rip the firmware. One of the esteem guys is working on that and we will see where it goes.
Sent from my VS910 4G using xda app-developers app
If you previously ran ZVB then installed OG, you have the zvb firmware, correct?
If so, so far it is running great.
Haxcid said:
If you previously ran ZVB then installed OG, you have the zvb firmware, correct?
If so, so far it is running great.
Click to expand...
Click to collapse
Yes sir you are correct.
Sent from my Nexus 7 using xda app-developers app
i am having this same issue i just bricked my phone and flashed zv9 in emergency mode and now i cant get any ota updates have we figured this out yet please say that we have

Categories

Resources