I have no ota updates anymore - LG Revolution

Just curious if any one else is having this issue. While testing zvb rom, cwm corrupted my system folder and cwm would not format/mount it. System would not boot. Could not flash anything that wrote to the system folder. Would not boot so I couldn't flash a tot, normally. Had to flash in emergency download mode. Now everything is fine except that I can't get any ota's. it keeps saying that there is no ota available, that my system is up to date.
Just wondering if anyone that has used emergency download mode then tried to ota, is having this issue.

Not me. That's helpful, right?
I un-rooted and un-CWMed (by resetting the executable bit on install-recovery.sh), so I was, theoretically, stock zv9. I could download the OTA (for the, like, millionth time), but it wouldn't install. Finally I dusted off Windows and did the normal TOT, and then was able to OTA to zvb.

OrangeJoe said:
Not me. That's helpful, right?
I un-rooted and un-CWMed (by resetting the executable bit on install-recovery.sh), so I was, theoretically, stock zv9. I could download the OTA (for the, like, millionth time), but it wouldn't install. Finally I dusted off Windows and did the normal TOT, and then was able to OTA to zvb.
Click to expand...
Click to collapse
I'm just curious if anyone else is having or had (previous revo owners) this issue. Nothing more. I couldn't get my phone to boot, therefore, I couldn't flash the v8 tot normally. I had no choice but to use 'emergency download mode'. Doing so, put me in 'test mode'. Once getting out of test mode, I get the "No software update available".
No biggie. OG ZVB runs absolutely flawless on v8. But if there is a way to get back to zvb, then I'm game. I would like to run OG ZVB on zvb Only seems appropriate

I.M.famous XMAN said:
I
No biggie. OG ZVB runs absolutely flawless on v8. But if there is a way to get back to zvb, then I'm game. I would like to run OG ZVB on zvb Only seems appropriate
Click to expand...
Click to collapse
Just curious: how much zv8 is left behind when you flash OG ZVB?
I pm'd you yesterday or the day before about maybe getting zvb back, in case you didn't see it.

OG ZVB is just the software part of ZVB. I'm trying to figure out how to rip the firmware. One of the esteem guys is working on that and we will see where it goes.
Sent from my VS910 4G using xda app-developers app

If you previously ran ZVB then installed OG, you have the zvb firmware, correct?
If so, so far it is running great.

Haxcid said:
If you previously ran ZVB then installed OG, you have the zvb firmware, correct?
If so, so far it is running great.
Click to expand...
Click to collapse
Yes sir you are correct.
Sent from my Nexus 7 using xda app-developers app

i am having this same issue i just bricked my phone and flashed zv9 in emergency mode and now i cant get any ota updates have we figured this out yet please say that we have

Related

[SBF] Gingerbread - 4.5.91 with Unlocked Bootloader US AT&T Only

Here is a link to the latest US AT&T 4.5.91 sbf with the unlocked bootloader and /preinstall root added.
Warning!
Use this with caution, and don't downgrade to 1.26, 1.5.7, or 1.8.3 unless it has the unlocked bootloader properly integrated into the sbf, and you have already used fastboot to unlock. In general I don't recommend downgrading at all.
If you already installed the official sbf without modification or updated to OTA without unlock, and not unlocked, then I recommend waiting and not installing anything from anyone for now.
We do have reports of hard bricks. We don't yet understand why only a few people have hard bricked. You are doing this at your own risk.
Download:
4.5.91 sbf with unlocked bootloader and /preinstall root
Thanks the2dcour!
Thanks is awasome
Nice. Is this safe? This is the official GB AT&T update with unlocked boot-loader correct? Can you use the preinstall method to root afterwards?
Has anyone used this over Gingerblur?
Great, what's the difference between this and another sbf posted today itself. Looks like both are same.
Sent from my MB860 using XDA Premium App
Did someone already tested this?
Sent from my MB860 using XDA App
Noob question... can I update this over the OTA that was leaked by Sam? Since his wasn't unlocked..?
anupash said:
Did someone already tested this?
Click to expand...
Click to collapse
This was tested before release on two phones.
ceo.mtcl said:
Great, what's the difference between this and another sbf posted today itself. Looks like both are same.
Click to expand...
Click to collapse
This is the same sbf, but with the unlocked bootloader added.
n0kia916 said:
Noob question... can I update this over the OTA that was leaked by Sam? Since his wasn't unlocked..?
Click to expand...
Click to collapse
I'd also be interested to know whether this is a possibility.
Even better, can you update over the OTA version that I flashed using the Motorola Update Service???
n0kia916 said:
Noob question... can I update this over the OTA that was leaked by Sam? Since his wasn't unlocked..?
Click to expand...
Click to collapse
If you already installed OTA without an unlock. Then you have the fuse burned that prevents you from downgrading to the official 1.8.3 sbf. If you do, you will brick your phone.
This sbf should work over the OTA. Think of it like a full reinstall of Windows, but in this case it is Android. To extend the metaphor further, this sbf is like having SP1 slipstreamed in, in that it has the unlocked bootloader integrated.
gogorman said:
I'd also be interested to know whether this is a possibility.
Even better, can you update over the OTA version that I flashed using the Motorola Update Service???
Click to expand...
Click to collapse
As I said in the post above, yes.
Isn't there a rooted version of this on the pudding page? or is it different
I updated over the OTA 2.3.4 by Samcripp but..
edgan said:
If you already installed OTA without an unlock. Then you have the fuse burned that prevents you from downgrading to the official 1.8.3 sbf. If you do, you will brick your phone.
This sbf should work over the OTA. Think of it like a full reinstall of Windows, but in this case it is Android. To extend the metaphor further, this sbf is like having SP1 slipstreamed in, in that it has the unlocked bootloader integrated.
Click to expand...
Click to collapse
So I decided to try and use RSD Lite 5.0 to update with the sbf posted from edgan. Previous version I had was the OTA update that was posted by Sammcripp but I wanted an unlocked bootloader. While waiting for the rsd to finish it failed at 99 percent when the phone rebooted and got an error 0x1000.. at this point I was ****ting myself..wtf! So it automatically went to fastboot mode and nothing else.. not even volume down menu.
To resolve this issue.. I did a fastboot oem unlock (your UID #)
then did a fastboot reboot and first it was stuck at the dual core screen. I rebooted again and did the volume down~ approach and was able to get into Recovery mode then allowed me to wipe data / cache and restore to factory defaults... bam phone booted up fine with unlocked message and able to use my phone again.. thanks Edgan! lol sorry if It's hard to understand me..
Also just ran quadrant and comparing to the leak 2.3.4 by samcripp this one gives me 300 more points consistently....
n0kia916 said:
So I decided to try and use RSD Lite 5.0 to update with the sbf posted from edgan. Previous version I had was the OTA update that was posted by Sammcripp but I wanted an unlocked bootloader. While waiting for the rsd to finish it failed at 99 percent when the phone rebooted and got an error 0x1000.. at this point I was ****ting myself..wtf! So it automatically went to fastboot mode and nothing else.. not even volume down menu.
To resolve this issue.. I did a fastboot oem unlock (your UID #)
then did a fastboot reboot and first it was stuck at the dual core screen. I rebooted again and did the volume down~ approach and was able to get into Recovery mode then allowed me to wipe data / cache and restore to factory defaults... bam phone booted up fine with unlocked message and able to use my phone again.. thanks Edgan! lol sorry if It's hard to understand me..
Also just ran quadrant and comparing to the leak 2.3.4 by samcripp this one gives me 300 more points consistently....
Click to expand...
Click to collapse
I don't know why you would see any performance difference. It should be exactly the same.
As for your 0x1000 problem, I have no idea why you got this. I tried this on some phones, and didn't have this problem. Though I used sbf_flash instead of RSD Lite 5.0.
I went back and checked the fuses on one phone to be sure a new one hadn't been blown. It came up the way I expected, not blown.
cat ReservedOdm
10000000000010001000100000000
Is that cat /mnt/proc/ReservedOdm that gives those 32 bits?
10000000000010001000100000000
This is great. What version of RSD does this work with? I did my friends with another method, and was missing all sounds/motoblur login didn't work. I will refer him to this thread.
From seeing the new MotoBlur, it is really nice. The screen rotation animation is very nice (not sure why all OEM's don't do that) very smooth.
edgan said:
I don't know why you would see any performance difference. It should be exactly the same.
As for your 0x1000 problem, I have no idea why you got this. I tried this on some phones, and didn't have this problem. Though I used sbf_flash instead of RSD Lite 5.0.
I went back and checked the fuses on one phone to be sure a new one hadn't been blown. It came up the way I expected, not blown.
cat ReservedOdm
10000000000010001000100000000
Click to expand...
Click to collapse
Before I flashed with rsd my RerservedOdm was and still is after upgrade is 10000000000010001000300004000 which showed my fuse was blown.
I didn't use fruit/pudding with the samcripp update. just did update.zip from the recovery.
stvmac11 said:
Isn't there a rooted version of this on the pudding page? or is it different
Click to expand...
Click to collapse
I have the same question. I just finished downloading the one on the pudding thread then saw this and am downloading it now. Does this have root? Is there any difference between the two?
lutharigno said:
I have the same question. I just finished downloading the one on the pudding thread then saw this and am downloading it now. Does this have root? Is there any difference between the two?
Click to expand...
Click to collapse
This doesn't come rooted.. you would have to do it again real quick.
OK I just bought another atrix of my friend who had already updated to the ota last night, will it be safe for me to use this?
Sent from my MB860 using XDA Premium App

Did you install 5.5.893 before doing the forever root? (I can help!)

Tivo to the rescue! (edit: added numbers to make it easier to specify where to look for users caught in the middle somewhere)
1. You can do one of two things to get back to 5.5.886
You can use RSD Lite to sbf back to stock 886
http://briefmobile.com/droid-bionic-receives-fastboot-recovery-files
Or you can use this One click restore and root to get back to stock 886
http://forum.xda-developers.com/showthread.php?t=1279825
Both of these will erase your data (but not your sd card). There's no way around that.
Because you already updated your radio files and theres no way to downgrade that, the one click root method will not work anymore. There's no stopping that, its already been done.
2. Because of P3droid, however, there is a manual method of rooting that still works.
Follow this link
http://www.mydroidworld.com/forums/...-your-phone-back-upgrade-path.html#post106072
Look at the second post. I tested this method after I, myself, went to 893 and SBFed back to 886. It works.
3. After that you can follow this guide starting from step 5 to get keep root through any upgrade.
http://androidforums.com/bionic-all-things-root/434407-how-flash-893-update-maintain-root.html
4. Then download the 886>893 file from here and put it on your SD card
http://www.mydroidworld.com/forums/...found-update-files-read-before-you-flash.html
5. Boot phone into STOCK RECOVERY (not clockwork mod recovery). When the triangle is up, press BOTH volume keys. Use Volume Down to navigate and Volume Up to select the install zip option. Select the 886>893 file you just downloaded and let it install. It will take a while.
Boot back up after that and you should be rooted and be running 5.5.893
Tivo7 said:
Tivo to the rescue!
You can do one of two things to get back to 5.5.886
You can use RSD Lite to sbf back to stock 886
http://briefmobile.com/droid-bionic-receives-fastboot-recovery-files
Or you can use this One click restore and root to get back to stock 886
http://forum.xda-developers.com/showthread.php?t=1279825
Both of these will erase your data (but not your sd card). There's no way around that.
Because you already updated your radio files and theres no way to downgrade that, the one click root method will not work anymore. There's no stopping that, its already been done.
Because of P3droid, however, there is a manual method of rooting that still works.
Follow this link
http://www.mydroidworld.com/forums/...-your-phone-back-upgrade-path.html#post106072
Look at the second post. I tested this method after I, myself, went to 893 and SBFed back to 886. It works.
After that you can follow this guide starting from step 5 to get keep root through any upgrade.
http://androidforums.com/bionic-all-things-root/434407-how-flash-893-update-maintain-root.html
Then download the 886>893 file from here and put it on your SD card
http://www.mydroidworld.com/forums/...found-update-files-read-before-you-flash.html
Boot phone into STOCK RECOVERY (not clockwork mod recovery). When the triangle is up, press BOTH volume keys. Use Volume Down to navigate and Volume Up to select the install zip option. Select the 886>893 file you just downloaded and let it install. It will take a while.
Boot back up after that and you should be rooted and be running 5.5.893
Click to expand...
Click to collapse
I will give this a try tonight... I hosed up one the Bionic's last night....
I was able to get it back to 866 but lost the root. I tired to re-root it and it failed. So I can not re-do cheesecake and get to [ROM] [R3]BLURR3D V2.0 PBX MOTO Kernel .
Crossing fingers....
~Socks
sockstobed said:
I will give this a try tonight... I hosed up one the Bionic's last night....
I was able to get it back to 866 but lost the root. I tired to re-root it and it failed. So I can not re-do cheesecake and get to [ROM] [R3]BLURR3D V2.0 PBX MOTO Kernel .
Crossing fingers....
~Socks
Click to expand...
Click to collapse
Yeah you wont be able to use the current version of any one click root method anymore because you upgraded your kernel and radio and those cant be downgraded.
The only method I know that works after updating kernel/radio is p3droid's manual method.
What if you flash the original full FXZ file using RSD lite, will that put back the original kernal and radios?
No. It is currently impossible to downgrade kernels and radios.
OK, so question, pardon my newbness, coming from a Thunderbolt and bought the Bionic yesterday, I rooted, flashed bionic bootstrap, and made a backup of my stock rom. Then I flashed Blurred 2.0 which is based on .893. If for what ever reason I need to go back stock, can I do so, or am I hosed?
You can always go back to 886 by flashing the system.img file.
If you're talking about doing that while still running that ROM, I don't think you should. I don't kno what would happen.
You will never be able to downgrade your kernel or radio files though (these keep you from using the root method most people know). P3droid's manual method works though.
Wait, so when I want to sell this phone in a few weeks, can somebody post a method to return back to stock, etc?
Sent from my DROID BIONIC using XDA App on UNL3ASH3D R3BLURR3D V2.0 and will continue to be sent from here until I buy the Galaxy Nexus 32GB
Nvm, I thought I had read that one click restore wouldn't work, but it will
Sent from my DROID BIONIC using XDA App on UNL3ASH3D R3BLURR3D V2.0 and will continue to be sent from here until I buy the Galaxy Nexus 32GB
Tivo7,
i am back to .889 rooted and ready to brick my phone again wow Motorola really trying but thanks to everyone involve we could continue modding our phones with no worries.
thank you again.
I just bootstrapped my backup of my stock .886 back no problem, from blurry 2.0. Booted up fine, everything appeared to be working fine. Then I went back to my back up of blurry 2.0 and it went back fine.
droid3d said:
Tivo7,
i am back to .889 rooted and ready to brick my phone again wow Motorola really trying but thanks to everyone involve we could continue modding our phones with no worries.
thank you again.
Click to expand...
Click to collapse
Just follow my guide and you can get to 893 rooted.
You're welcome.
stevessvt said:
I just bootstrapped my backup of my stock .886 back no problem, from blurry 2.0. Booted up fine, everything appeared to be working fine. Then I went back to my back up of blurry 2.0 and it went back fine.
Click to expand...
Click to collapse
Nice. You can go to 893 with my guide.
Th3ory works on 893.
Thats what I was on,...went from th3ory R3 Blurr3d 2.0, based on .893, back to my stock .886 backup I made in bootstrap, worked fine, and back to the back up of Blurr3y I made in bootstrap again. No problems at all.
stevessvt said:
Thats what I was on,...went from th3ory R3 Blurr3d 2.0, based on .893, back to my stock .886 backup I made in bootstrap, worked fine, and back to the back up of Blurr3y I made in bootstrap again. No problems at all.
Click to expand...
Click to collapse
Cool cool.
stevessvt said:
What if you flash the original full FXZ file using RSD lite, will that put back the original kernal and radios?
Click to expand...
Click to collapse
I was unable to use the original full FXZ. When I tried to go back to stock 886, RAD would fail to flash. I had to use P3's method to get back to 886, and then used his method to root.
This is P3's post...
How to get your phone back on the upgrade path...
http://www.mydroidworld.com/forums/droid-bionic-forum/9800-how-get-your-phone-back-upgrade-path.html
Thanks, but since asking that question Ive nandroided back to stock .886 with a backup ive made. I know the radios and kernals are still .893, but everything worked fine.
stevessvt said:
Thanks, but since asking that question Ive nandroided back to stock .886 with a backup ive made. I know the radios and kernals are still .893, but everything worked fine.
Click to expand...
Click to collapse
Awesome. Good to know.
stevessvt said:
OK, so question, pardon my newbness, coming from a Thunderbolt and bought the Bionic yesterday, I rooted, flashed bionic bootstrap, and made a backup of my stock rom. Then I flashed Blurred 2.0 which is based on .893. If for what ever reason I need to go back stock, can I do so, or am I hosed?
Click to expand...
Click to collapse
If that's all you did you don't have 893 radio or kernel you have to do forever root and cheesecake app to get OTA update blurred 2.0 is based on update but dose not flash kernel or radio
Sent from my DROID BIONIC using xda premium
This saved me. Forever root didn't take when I updated to .893 so I had to do it manually off of a nandroid restore. Thank you so much!
anuraj1 said:
This saved me. Forever root didn't take when I updated to .893 so I had to do it manually off of a nandroid restore. Thank you so much!
Click to expand...
Click to collapse
You're welcome
I just didn't want others to feel all the pain I did on this, so I posted the steps I took to fix it.
This is basically just a guide putting everyone else's guides together in one place.

[Q] Cannot update to Gingerbread

Hey everyone. I rooted my phone a while back (around June), but it got unrooted during the update in July and I haven't bothered rooting it again. But now, when I try to update to Gingerbread, I always get a message saying "Update failed or incomplete" after downloading and rebooting. I noticed I still have SuperUser installed, so I tried unrooting with SuperOneClick, but SuperOneClick is stuck on "Waiting for Device". I have also tried to reset to factory settings, with the same result. Does anyone know how to fix this? Thanks.
rawrzar said:
Hey everyone. I rooted my phone a while back (around June), but it got unrooted during the update in July and I haven't bothered rooting it again. But now, when I try to update to Gingerbread, I always get a message saying "Update failed or incomplete" after downloading and rebooting. I noticed I still have SuperUser installed, so I tried unrooting with SuperOneClick, but SuperOneClick is stuck on "Waiting for Device". I have also tried to reset to factory settings, with the same result. Does anyone know how to fix this? Thanks.
Click to expand...
Click to collapse
You may not have updated like you thought. V6 should have gotten rid of root for you. I had to do a factory restore, wipe the data and image, all of it. When I went back to do all that stuff, I still had the Bionic splash screen, and it is because of that little change, that I was not able to update myself. You may have something similar going on with your phone, just in a different place. Anything beyond doing that, just ask, but it should take care of you. Make a backup first, just in case. You will have to set everything up again.
markapowell said:
You may not have updated like you thought. V6 should have gotten rid of root for you. I had to do a factory restore, wipe the data and image, all of it. When I went back to do all that stuff, I still had the Bionic splash screen, and it is because of that little change, that I was not able to update myself. You may have something similar going on with your phone, just in a different place. Anything beyond doing that, just ask, but it should take care of you. Make a backup first, just in case. You will have to set everything up again.
Click to expand...
Click to collapse
Thanks for your reply. I have performed a factory reset, but the update still fails. I also notice that after the reset, SuperUser is still listed under my installed apps.
rawrzar said:
Thanks for your reply. I have performed a factory reset, but the update still fails. I also notice that after the reset, SuperUser is still listed under my installed apps.
Click to expand...
Click to collapse
Does the update fail, or does it just say no update available?
Sent from my VS910 4G using xda premium
mtmichaelson said:
Does the update fail, or does it just say no update available?
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
It fails. the update downloads, and reboots to install. But about half way through the installation, the phone reboots again. when the home screen comes up, a screen pops up saying "update failed or incomplete".
I had the same problem. Did you reinstall the stock recovery program? I also had the bionic boot image from revolt1.5, which was messing things up. Once I reverted back to the stock boot image, the update went through.
JohnnyAn said:
I had the same problem. Did you reinstall the stock recovery program? I also had the bionic boot image from revolt1.5, which was messing things up. Once I reverted back to the stock boot image, the update went through.
Click to expand...
Click to collapse
How would I go about reverting back to stock image? sorry , I don't know much about this.
rawrzar said:
How would I go about reverting back to stock image? sorry , I don't know much about this.
Click to expand...
Click to collapse
The cubed had a stock revo file that he posted somewhere in the dev forum. Just flash that with CWM and you should be good to go.
Sent from my VS910 4G using XDA App
I am in a similar situation but when I try to update to gingerbread it says there is no update available. I too still have supreuser installed after reflashing from revolt 1.5 to thcubed zv4 rooted stock and then updating its to zv6. How can I get my phone to download zv7?
Sent from my VS910 4G using XDA App
jdleider said:
I am in a similar situation but when I try to update to gingerbread it says there is no update available. I too still have supreuser installed after reflashing from revolt 1.5 to thcubed zv4 rooted stock and then updating its to zv6. How can I get my phone to download zv7?
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
Apparently the update hasn't been pushed to all phones yet...there's several of us on xda that still don't have it. Jackpot08 is working on a .tot but until then, we just have to wait.
Some people have called Verizon and they can't force the update to your phone, so don't bother with that.
JohnnyAn said:
The cubed had a stock revo file that he posted somewhere in the dev forum. Just flash that with CWM and you should be good to go.
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
Thanks! Found it and got it working. Just waiting for the update now.
jamRwoo said:
Apparently the update hasn't been pushed to all phones yet...there's several of us on xda that still don't have it. Jackpot08 is working on a .tot but until then, we just have to wait.
Some people have called Verizon and they can't force the update to your phone, so don't bother with that.
Click to expand...
Click to collapse
Thanks for the info, guess the update hasn't been pushed to my phone yet.
I have been on stock for a week now, and its been horrible. I forgot how slow this was before devs streamlined the system, and how many rooted apps/functions I used.
I am going back to revolt today. I will see GB when the .TOT is available.
rawrzar said:
Hey everyone. I rooted my phone a while back (around June), but it got unrooted during the update in July and I haven't bothered rooting it again. But now, when I try to update to Gingerbread, I always get a message saying "Update failed or incomplete" after downloading and rebooting. I noticed I still have SuperUser installed, so I tried unrooting with SuperOneClick, but SuperOneClick is stuck on "Waiting for Device". I have also tried to reset to factory settings, with the same result. Does anyone know how to fix this? Thanks.
Click to expand...
Click to collapse
Were you attempting to update to gingerbread by using the TOT? Or was there an update available though your service provider?
If you were getting a failure through the network, it's likely because you haven't gone back to stock recovery and still have ClockWorkMod Recovery installed. Use DevToolKit to fix this.
If you are using the TOT and getting a failure, do a checksum on the TOT file.
I've been working on this actively as I have a revolution. LG has informed me the update push completed on November 2. Nobody at VZW or LG can tell me why some Revolutions haven't gotten the push.
VZW Engineering has apparently been alerted, but LG has been unresponsive to me to-date.
I'm not waiting and putting together a one-package manual update kit, but I do want to give LG and VZW time to give me an update. Thing is, it's been over 72 hours now and there hasn't been one, so my patience is wearing thin.
It's disappointing that LG hasn't responded to any of my inquiries... I'm asking the right people behind the scenes.
hatoncat said:
I've been working on this actively as I have a revolution. LG has informed me the update push completed on November 2. Nobody at VZW or LG can tell me why some Revolutions haven't gotten the push.
VZW Engineering has apparently been alerted, but LG has been unresponsive to me to-date.
I'm not waiting and putting together a one-package manual update kit, but I do want to give LG and VZW time to give me an update. Thing is, it's been over 72 hours now and there hasn't been one, so my patience is wearing thin.
It's disappointing that LG hasn't responded to any of my inquiries... I'm asking the right people behind the scenes.
Click to expand...
Click to collapse
I'm in Rochester NY and never got one. I gave it til 2 days ago and threw on the TOT.
Madert said:
I'm in Rochester NY and never got one. I gave it til 2 days ago and threw on the TOT.
Click to expand...
Click to collapse
Yeah, I'm leaning towards drafting an idiot-proof TOT guide, it's just going to be really upsetting if I have to do that. If this was Apple, and not LG, we wouldn't even have this thread right now.
Option-click .ipk and done... not that Apple would even let ~1-5% of a device "miss" an update.
So, I've confirmed a few things with LG officially:
1) The ZV7 update has not been pulled.
2) LG was not aware of this issue until I reported it.
3) LG is just now starting the process of investigating.
I can't flash a TOT on mine right now, as LG may want to capture my unit for evaluation. I'll know more soon, hopefully by Monday.
Verizon was trying to push an update on me back on the 11th. It was the V6 update, as I was running V4. It failed, and I manually ran the tot through with LGNPST. Since thecubed had posted the V7 tot as well, I ran that through as well.
I probably did not need to go from V4 to V6 to get to V7, but I figured it wouldn't hurt.
But as I said, the only push I had received was on the 11th, well after the 2nd.
As a semi-newbie, it was easier to push the tot on than anything else.
LG Engineering is at least listening... they have agreed to capture my unit and send me a brand new Revolution simultaneously.
antiwesley said:
Verizon was trying to push an update on me back on the 11th. It was the V6 update, as I was running V4. It failed, and I manually ran the tot through with LGNPST. Since thecubed had posted the V7 tot as well, I ran that through as well.
I probably did not need to go from V4 to V6 to get to V7, but I figured it wouldn't hurt.
But as I said, the only push I had received was on the 11th, well after the 2nd.
As a semi-newbie, it was easier to push the tot on than anything else.
Click to expand...
Click to collapse
Did you have clockwork recovery installed when you tried to get Verizon s update
Sent from my gingervolt`ed revolution

Update to ZV8 from ZV6

Hey guys, I've been fiddling with this phone for 7 hours now...
I live in US, phone's on the Verizon carrier.
Right now the phone is on "LG_VS910ZV6_TO_V6A", it's stock ROM
It's rooted, and has ClockWorkMod recovery v4.0.something
The main annoyance is that it keeps trying to get the OTA updates, but because it's in a custom recovery - fails. So I figured if I'm going to fix the failed OTA updates, I might as well put something good on it, so what I want is to get BrokenOutRevo1.1 rom working (forum.xda-developers.com/...7423), but it required ZV8 being already installed.
the trouble i'm running into is all the posts I can find are either how to get ZV7 to ZV8, or how to get an OTA, while keeping root...
I did find this thread, which says it can bring ZV8 to any LG revolution... I've set everything up, and am waiting for the ROM to download (5 hours remaining)... In the mean time, maybe anyone knows a faster way to get to the BrokenOutRevo from ZV6?
Wow 5 hours remaining to download a ROM!? Your effort is good but I think you're trying too hard lol. Easiest way to do what you're doing (and fastest), would be to update to ZV7 using the LGNPST method and then going here: http://forum.xda-developers.com/showthread.php?t=1583023
Quickest and easiest there is right now. There is no ZV6 to ZV8 method available that I'm aware of.
Could be wrong though.
Sent from my VS910 4G using Tapatalk
Well those *.tot files are almost 1gb, and their host is slow on speed.
So, LGNPST won't be able to update directly to ZV8?
Took a minute to find. http://forum.xda-developers.com/showthread.php?t=1337386 That has all tot files including ZV8. Then go here and try this: http://forum.xda-developers.com/sho... name.
Sent from my VS910 4G using Tapatalk
Thank you all I uploaded ZV8 to phone using LGNPST, and then installed BrokenOut, everything warks flawless, thank you all!

Droid 3 ROOT problems?

Im trying to ROOT my Droid 3 but keep running into issues. I am bone stock 5.7.906. I tried running the One-Click-Root, it works til the last step then fails. I was told to try going down to 5.6.890. So I tried that using RSD Lite, and it fails on step 6/18. Now everytime I reboot it goes into fast boot. I can get it to boot normally but only after being brought to fastboot (its just annoying). But basically nothing I try works. I cant ROOT, I cant downgrade software. I cant even reset my phone cuz when it reboots it goes into fastboot, cancelling the reset. Any help would be great. Thanks =)
Please dont tell me to search because I have and I couldnt find anything that helped me. Links and how to's would be a great help :good:
Seaaarch!
Naw, jk. I'm looking into it right now, because I don't remember exactly how I did it, but if I remember correctly you can not return to previous versions once you have the .906 firmware. I'm sure someone'll correct me if I'm wrong. x3 So you'll probably have to find a way to SBF the .906 before you can proceed to rooting.
When you went to .890, did you use a modified version with .906 bits or did you use an actual .890 SBF?
Edit Edit: And now if I remember correctly, I used MotoFail to obtain Root and then threw Hash-Code's SafeStrap on before flashing a new ROM.
ZionCorps said:
Seaaarch!
Naw, jk. I'm looking into it right now, because I don't remember exactly how I did it, but if I remember correctly you can not return to previous versions once you have the .906 firmware. I'm sure someone'll correct me if I'm wrong. x3 So you'll probably have to find a way to SBF the .906 before you can proceed to rooting.
When you went to .890, did you use a modified version with .906 bits or did you use an actual .890 SBF?
Edit Edit: And now if I remember correctly, I used MotoFail to obtain Root and then threw Hash-Code's SafeStrap on before flashing a new ROM.
Click to expand...
Click to collapse
I believe its the actual .890 BUT, I never got it to go back, so Im still on .906. It failed to go to .890 which is now why everytime I reboot it goes into fastboot saying Flash Failed. But i just hit normal boot and it boots up. Superuser is on it, and safestrap but safestrap force closes every time I try to open it. I downloaded ROOT Checker to see if Im actually rooted and it says that Im not.
Aah.. I would recommend you use the .906 to .890 one-click.
Just note at the bottom of the post it says you'll have to reinstall the .906 update either OTA or put the download on your external card. But I'm no pro. In your case, it would be my mindset to restart from the beginning.
Oh no, I assumed you're even using the XT862 version of the Droid 3, which that thread I linked states it is only for that model.
jburke90 said:
I believe its the actual .890 BUT, I never got it to go back, so Im still on .906. It failed to go to .890 which is now why everytime I reboot it goes into fastboot saying Flash Failed. But i just hit normal boot and it boots up. Superuser is on it, and safestrap but safestrap force closes every time I try to open it. I downloaded ROOT Checker to see if Im actually rooted and it says that Im not.
Click to expand...
Click to collapse
There is a sticky that has a sbf that works to bring you back to .890 as it has parts of 906 in it.
http://forum.xda-developers.com/showthread.php?t=1686911
Sent from my XT860 using xda premium
ZionCorps said:
Aah.. I would recommend you use the .906 to .890 one-click.
Just note at the bottom of the post it says you'll have to reinstall the .906 update either OTA or put the download on your external card. But I'm no pro. In your case, it would be my mindset to restart from the beginning.
Oh no, I assumed you're even using the XT862 version of the Droid 3, which that thread I linked states it is only for that model.
Click to expand...
Click to collapse
Im downloading this right now. ---> http://forum.xda-developers.com/showthread.php?t=1686911
Yep! Looks like they're all the same link. :] Should work well for you as long as you follow the instructions and use the MotoFail link provided down in that same thread.
ZionCorps said:
Yep! Looks like they're all the same link. :] Should work well for you as long as you follow the instructions and use the MotoFail link provided down in that same thread.
Click to expand...
Click to collapse
Use motofail afterwords right?
Correct. After you've done the one-click SBF and you've got your phone all up and running you can use the MotoFail.
ZionCorps said:
Correct. After you've done the one-click SBF and you've got your phone all up and running you can use the MotoFail.
Click to expand...
Click to collapse
Well, everything is good except one thing. Im running Steel Droid 4.8 smoothly. But, when I go into widgets to add Quick Contacts, it doesn't show on the home screen. Like it takes up space, i can remove it (if i hit the right spot), but it doesn't show up. Like its there but invisible. Why...?
jburke90 said:
Well, everything is good except one thing. Im running Steel Droid 4.8 smoothly. But, when I go into widgets to add Quick Contacts, it doesn't show on the home screen. Like it takes up space, i can remove it (if i hit the right spot), but it doesn't show up. Like its there but invisible. Why...?
Click to expand...
Click to collapse
Most likely a bug in the rom or the widget.

Categories

Resources