Hi,
This is by far the most hi-tech question on the board... ;-)
I've lost the stupid little rubber cap that used to cover the antenna port. Cingular and Siemens are unable/unwilling to assist. Has anybody found an alternate source for replacements?
Thanks in advance!
Annoying little rubber piece
You the same exact thing happen to me. I ended up taking it from the non working display model at the sprint store. But then I lost it again. So if anybody knows, please let me know
Hum... I tried that with the styalist only to find that it was glued! Oh no let me correct that a friend of mine told me that he...
Try using the plastic bit on the non-writing end of a Bic stick ballpoint pen; it's about the right size & shape.
i-mate said they'd replace mine. Maybe I can get a few extras, too.
TheLastOne
You must be on great drugs! were do you get them from? LOL
OK then,
I was going to get a new housing for my sad looking Ameo. They come in the standard Ameo silver or a rather smart HTC black. I already have a silver case, but here is the question.
Do the black housings, wear, scratch, or paint rub away easy? I don't want to get one and find it looks crap after six months. They ain't cheap! before anyone else says it, I know it depends how you treat it. I'm on about normal wear and tear use. How does yours look now? are there any signs of the metal underneath showing?
Regards
Jay
Black Case On The "advantage"...
Hey Jay,
I have a HTC Advantage x7501, with the black case of course, and have been using it with "typical" every-day use now for about 6 months. I have never even seen one of the silver cased "Ameo" versions of the device in person, so my review is a bit "one-sided," if you will... Also, I have a friend with whom I work with that also owns the same model as I. With saying all that, and without having experienced the silver model, I would bet the silver model would hold up a bit better on the finish due to the fact that if the silver gets scratched, the metal beneath it looks much closer to the silver finish than the black. I have a couple small blemishes on mine, and I am very particular with my mobile devices, but after using day-by-day at work and home, it has managed to get marked up just a bit. The biggest problem is, if you get a scratch on it, the metal below sticks out "like a sore thumb!"
I definitely believe that the black finish is a bit more professional looking, where sometimes the silver finishes can make a device look cheap or make it stand out.
Anyways, to give you my honest account on TWO Advantage x7501 devices (black finish) after 6 or so months of daily use, it is overall good, and neither one shows any major signs of wearing finish. Also, we both use a case that the device "slides" tightly in and out of each time you use it (without the keyboard attatched), and the device really hasn't shown any real signs of wear on the sides where it rubs the case. However, if you do happen to mark it up in any way, you will definitely notice it. Again, I am very picky, so keep that in mind, but so you have a better idea of what I am saying, I attatched a couple of pics so you can see what it looks like when or if you do scratch or mark it.
HOPE THIS HELPS!!!
-Ryan
Also Note: Only one of the devices I wrote about is pictured, but are very similar in condition, and were both purchased slightly used.
X7501 Cosmetics...
I have had my X7501 for almost 10 months now and it only has one very tiny mark on the top right corner (you have to look hard to even see it).
Since I'm also very particular about my devices (I always keep them looking new) I just used a Sharpie (permanent marking pen) to "erase" the offending mark. This works great and I would recommend it to anyone wanting to touch-up black anodized aluminum like the Athena housing.
Wow! thanks for the reply Guys, Ryan that was one hell of a reply. Must have took you a while to do that and I appreciate it. toyfreak, the idea with the marker pen is a great one. I think on just that idea alone I will get black. Its harder to touch up silver! It looks better too.
Regards
Jay
Indeed is surprisingly hard coating, I carry mine in my pockets and can't say I'm careful with it, rather the opposite, I have it since it came out and there is only a little wear in one of the corners, hardly noticeable, where the scratches are more visible, is on the silver border next to the screen, not that it look bad or anything.
Black housing - Where?
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Silver / AMEO
Hi guys,
Proud owner of a wonderful brick since 6 months in grey color I should say that if I new I would have choosen a different color.
The grey AMEO housing is far from being "time resistant"...
Since few weeks the "video camera" around the front cam as disappeared and the "Alert" will soon do the same.
I allways take good care of my stuf and I'am bit disapointed for a 1.000 bucks machine to see it !
hmeyer said:
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Click to expand...
Click to collapse
They are available on ebay, if you search athena case you should find them. any problems then let me know. There is a guy who does spares on there and he has them in black or Silver.
regards
Jay
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
responderman said:
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
Click to expand...
Click to collapse
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
tootallk2000 said:
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
Click to expand...
Click to collapse
Forgive my ignorance, What is the difference?
Jay
responderman said:
Forgive my ignorance, What is the difference?
Jay
Click to expand...
Click to collapse
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
I need a new housing too.
Anychance you could PM me a link or contact for this.
Thanks in advance.
tootallk2000 said:
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
Click to expand...
Click to collapse
7501 does have 2 cams. the 7510 doesnt
goodluckje said:
7501 does have 2 cams. the 7510 doesnt
Click to expand...
Click to collapse
LMAO dude have you been drinking? The 7501 has 1 camera and the 7500 and the 7510 has 2. I own the 7501 which is also cheaper than the 7500. I suggest you google them and you'll see the difference.
tootallk is correct. 7501 has 1.
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
wgary said:
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
Click to expand...
Click to collapse
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
oops my bad.
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
Here you go,
http://search.stores.ebay.co.uk/sk-...shopQQfsooZ1QQfsopZ1QQsaselZ239115870QQsofpZ0
Not cheap though!
Jay
P.S if im in trouble "Madbird" made me do it
Hi there,
the cover for the USB port of my HTC Dream /T-Mobile G1 became loose. The little plastic cable that holds it to the phone ripped but I still had it - I planned to glue the cover back to that plastic cable thing.
Unfortunately I lost that cover now. I was searching the web (including ebay) for replacement but even if I bought a complete housing they'd come without that little plastic cable holding the USB cover.
Does anybody know where to get replacement? By the way I would like to know where to get good (high quality) tools for opening the housing without breaking it.
I appreciate your help.
You would probably have to buy a broken phone and hope that the cover is still intact. While I managed to maintain that cover on mine, I did find it highly frustrating. Many people actually PREFERRED to rip it off. I certainly wouldn't go out of my way to replace it, since that cover really is quite redundant. You won't hurt anything by not having it.
Yes, you're right somehow, it is redundant. It looks a little ugly, though. Maybe someone can still point a way to that cover
2 bricked G1's for sale on ebay for parts:
http://cgi.ebay.com/2-BRICKED-G1-PH...652?pt=LH_DefaultDomain_0&hash=item20b72aa884
Thank's for the ebay link. I am already bidding on some broken phones on ebay.de. though. I though was hoping to find that cover as a sparepart somewhere.
jdb78 said:
Thank's for the ebay link. I am already bidding on some broken phones on ebay.de. though. I though was hoping to find that cover as a sparepart somewhere.
Click to expand...
Click to collapse
Try topicovers.com if you are still having problems. I bought some and now is a big fan of them. Good luck!
ordered a digitizer with bezel and all that stuff pre assembled from some phone seller in china (only one on the net selling the assembly). the chassis is different tho. I cant fit the black box that the signal wire attaches to in the new chassis.
anyone else run into this problem. do I need to post a pick to help you guys help me?
bump
montrese04 said:
ordered a digitizer with bezel and all that stuff pre assembled from some phone seller in china (only one on the net selling the assembly). the chassis is different tho. I cant fit the black box that the signal wire attaches to in the new chassis.
anyone else run into this problem. do I need to post a pick to help you guys help me?
Click to expand...
Click to collapse
Are you sure you didn't order parts for the Z1? The Z1 and the Z1s are different in size etc
Hi Guys I've Been Looking For A While Now For A Nice Enough Looking Case That Has The Port Covers And That Also Covers The Bezel Of The Phone ? Does anyone know of any as I'm struggling to find some. Many thanks
trayscragg said:
Hi Guys I've Been Looking For A While Now For A Nice Enough Looking Case That Has The Port Covers And That Also Covers The Bezel Of The Phone ? Does anyone know of any as I'm struggling to find some. Many thanks
Click to expand...
Click to collapse
this one does the trick http://forum.xda-developers.com/galaxy-s6-edge/accessories/ringke-fusion-case-smoke-black-t3119340
correct, that is the one;
you wont regret it; my phone felt from like 20ft the cover took a serious dent but the phone is ok; a very small shadow on the bezel