Database Develop

Need to upgrade my Galaxy S, need your advices

Hi,
I need to upgrade my Galaxy S.
Currently, I have this:
- Model number: GT-I9000
- Microsoftware version: 2.1-update1
- Bandwidth version: I9000BVJF3
- Kernel version: 2.6.29 [email protected] #2
- Version number: ECLAIR.BVJG2
Can you let me know how I can upgrade this ? How do I have to start ?
I have installed Samsung Kies and sync the phone with it. I expected to be able to do a firmware update thanks to Samsung Kies. But Samsung Kies doesn't seems to offer any firmware update !?

Can you give me links for dummies on how to flash my devices?

I dont know if it works fine when you are still on Eclair.
I've updated first my sgs to 2.3.6 with kies. You must open Kies in admin mod then it should works fine. If it doesnt you can backup with Kies, or rather kies restores it. Or you flash a firmware with odin. Unfortunately I dont know a guidance in english, but here in the forum there are certainly many of them.
If you are powerfull in german language, you can use this one: Here
It is for CM9, but it is the same approach for another custom rom.

If you want to stay stock (that's official firmware), then download samsung kies and just connect your phone to your pc using a USB cable. A message will pop up saying there is a new updade (Gingerbread 2.3.6). Back your phone up, then click install. Easy!
If you want to go for a custom rom, I suggest you download CyanogenMod 10 stable from CyanogenMod.org (once downloaded, don't try to unzip or extract the file, leave it zipped!) The ROM is based on android 4.1.2 Jellybean. It's a great ROM and also very stable. You will need to root your phone first though before installing it. But before you do anything, you will need to do a factory reset, and wipe your phones cache/partition first. Just turn your phone off and press and hold the power button + home key + volume up button (all 3 together). A menu will will pop up with the options to 'wipe cache/wipe partition' and perform a 'factory reset'. Use the volume up/down buttons to navigate, and the home button to select each one.
Once you have done a factory reset and wiped your phones cache/partition, you will need to find a root file for the specific firmware that is on your phone at the moment (look in Chainfires CF-root thread here on xda). After downloading the root file unzip/extract it. Next, download odin. Almost any version of odin should do, but try finding (again on xda) odin version 1.85 or 1.87. Once you have downloaded the root file and odin, open odin, then put your phone into download mode (press and hold the power button + the home key button + volume down button. A yellow android should appear. Then, connect your phone to your computer via the USB cable.
In the bottom left corner of odin, you should see the word ADDED! in a small box (providing you have the right drivers installed). This just means your phone is now connected to odin and ready to flash. To the right you will see a button called PDA, click on it and it should take you to your root file (provided you extracted/unzipped it). Double click on it, and it will automatically go in the PDA box in odin.
Above the PDA button, there is a 'start' button. Click that, and odin will do it's magic. After your phone has rebooted it should be rooted and ready to go. Next, close odin and take the USB lead out, then plug it back in. An autoplay box should open. Click on the option 'open folder to view files'. In the left pane, click on 'removable disk (G), and look for your external SD card folder. Click on it to open, and drag the zipped CyanogenMod 10 stable folder there, then turn off your phone. Wait until it is completely off and vibrates, then press and hold the power button + home button + volume UP button together. Your phone should boot into recovery mode.
Look for the option 'install zip from sdcard'. Again, use the volume up/down button to navigate, and the home key to select. After you have selected 'install zip from sdcard', there will be another option that says 'choose zip from sdcard'. Click that, and you should see a long list of folders. Toggle down to the 'external_sd' folder, and open it. The zipped CyanogenMod 10 stable folder should be there. Use the volume or up down button to select it, then hit the home key button. It will then install the ROM. When it's finished, just select 'reboot phone', and you are done!

[Q] Mini S5570I stuck on loading screen / failed recovery flash

Hello,
So I have a galaxy mini s5570i version and I tried to flash recovery on it. As i realized Odin can't seem to identify this version, I might be wrong tho, god hope so. So i tried to find another way of flashing it. I managed to get root on it (with an update.zip) but I couldn't find any cwm for it, so at last I tried my luck by putting the s5570 cwm 5.2.0.8 touch recovery on it via the original recovery.
Now the phone hangs on boot logo, I assume it can't find the system partition or something like that.
I'm still able to get into stock recovery and download mode.
What are my options?
Can I get custom recovery on it via odin or sd card or somehow?
Can I get back to original Android at least via sd and downloaded stock ROM and update that?
Thanks in advance

Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!

missing parts
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.

dglteam said:
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.
Click to expand...
Click to collapse
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead

FixMyProblems said:
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead
Click to expand...
Click to collapse
yes, it turns into Download mode. but Odin did not recongnise phone. it says: odin mode..check platform verification

FixMyProblems said:
Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!
Click to expand...
Click to collapse
many many thanks to you my friend.. finally finished .. thanks a lot

sir plz guide me my phone is stuke when i start mobile

[Q] How to root and install Custom rom

I want to root and install Custom rom on my Samsung galaxy s3 19305T on stock android 4.3
Sent from my GT-I9305T using XDA Free mobile app

Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.

How to root your samsung galaxy s3

How to root your Samsung galaxy S3 Running Android 4.3 XXUGNA8

Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.

Raistlin1158 said:
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Click to expand...
Click to collapse
my Galaxy S III i9300 not i9305

Then why are you posting in the wrong forum....

Raistlin1158 said:
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Click to expand...
Click to collapse
what about knox etc? is it safe to flash this? will knox will change from 0x0 to 0x1 after this?

godlesplay said:
what about knox etc? is it safe to flash this? will knox will change from 0x0 to 0x1 after this?
Click to expand...
Click to collapse
Yes this will trip knox, but you can use Triangle Away to reset the counter

If you are thinking of changing to custom ROMs then use CyanogenMod installer

G33k_ said:
Yes this will trip knox, but you can use Triangle Away to reset the counter
Click to expand...
Click to collapse
is there any other way to root s3 lte without rising knox?

Hi,
i got this Phone for my Girlfriend yesterday. There is 4.4.2 on the Phone. Does this work on this Version too?
Best regards
Chris
EDIT: sorry, wrong phone version.
Unterwegs @ G-Pad

[TUT] How to root and un-root GT-I9305 on KitKat 4.4.4.

I'M NOT RESPONSIBLE IF YOUR PHONE GOT BRICKED, DO THIS AT YOUR OWN RISK!
ROOTING (CUSTOM RECOVERY + SUPERSU)​
MAKE SURE YOUR PHONE’S 80% CHARGE OR ABOVE!!!
1) Download Odin.
LINK: https://www.dropbox.com/s/fivpr9btf6667hr/Odin 3.07.rar?dl=0
Download “philz_touch_6.26.6-i9305.tar”
LINK: http://goo.im/devs/mskip/recovery/samsung_galaxy_s3/philz_touch_6.26.6-i9305.tar.md5/
2) Unzip Odin to your desktop.
Copy the “philz_touch_6.26.6-i9305.tar” to the same directory.
3) Make sure your phone is in DOWNLOAD MODE.
Power OFF your phone if you haven't done so.
Press Volume Down + Home Button + Power Button.
You will see a screen saying “Warning!”
Just ignore what it says and PRESS the Volume Up button.
4) Now, connect the phone to your Windows computer/laptop.
Connect the USB cable to your phone first then to your computer.
Let it detect your phone.
5) If Kies is running on your pc shut it down.
6) Open the Odin application.
7) In the Message Box (located at the bottom left corner of Odin), you should see "Added!!" there.
8) Choose PDA button and select the "philz_touch_6.26.6-i9305.tar".
9) Now, click on START. Your phone will be flashed and reboot when it is finished.
10) After rebooting, copy “UPDATE-SuperSU-v2.02” to your SD Card.
LINK: http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
11) Power it off again.
12) Put the phone in recovery mode.
Hold down Power, Volume Up and Home when the device is turned off and unplugged and release once you see the Samsung logo.
13) After that you can flash the “UPDATE-SuperSU-v2.02” to be ROOTED to any firmware.
UN-ROOTING USING PC ODIN​
MAKE SURE YOUR PHONE’S 80% CHARGE OR ABOVE!!!
1) Make sure your phone is in DOWNLOAD MODE.
Power OFF your phone if you haven't done so.
Press Volume Down + Home Button + Power Button.
You will see a screen saying “Warning!”
Just ignore what it says and PRESS the Volume Up button.
2) Now, connect the phone to your Windows computer/laptop.
Connect the USB cable to your phone first then to your computer.
Let it detect your phone.
3) Extract both files (Odin & Stock Rom) to your Desktop.
Double-click on the Odin executable file and it’ll launch.
4) In the Odin, click on PDA tab and select the Stock Firmware file you extracted to your Desktop.
5) Make sure only Auto Reboot and F. Reset Time boxes are checked in the Odin.
6) Click on Start button in the Odin and leave the rest of the work on the tool.
Your device should reboot once flashing’s done.
7) You have successfully un-rooted your S3!
USING MOBILE ODIN​
1) Ensure you’re having root access using “Root Checker”.
2) Copy the Stock Firmware file to your SD Card.
3) Install Mobile Odin APK and open it.
4) Choose “Open File…”
5) Navigate to where you put the Stock Firmware and choose it.
6) Now scroll down till you see “Ever Root” and uncheck it.
7) Now tap “Flash Firmware”, you’re phone will restart and start flashing.
8) After flashing is done it’ll reboot.
9) You have successfully un-rooted your S3!
Credit goes to @SeyMedia for original aid, I just made this into a tutorial. Good Luck!:good:

root/recovery won't work that way for 4.4
as soon as you let the phone reboot into system after flashing custom recovery, it will get overwritten by original one; so after you turn the phone off and reboot manually then, don't be surprised to see stock recovery

After flashing custom recovery don't turn the phone on. Just return with 3combo to recovery and flash su. This is how worked for me

Regarding the rooting process:
- just untick F. Reset Time in Odin when you flash philz_touch_6.26.6-i9305.tar;
- when flashing is done, disconnect phone from pc and pull up the battery for a few seconds;
- put back the battery;
- enter in recovery mode (you will enter in Philz Touch);
- flash UPDATE-SuperSU-v2.02.
This will do the trick!

SeyMedia said:
Regarding the rooting process:
- flash UPDATE-SuperSU-v2.02.
This will do the trick!
Click to expand...
Click to collapse
I downloaed SuperSU 2.02 two times from official site, but it didn't want to flash...
I think it is corrputed. After that i downloaded 1.96 and it worked.
yozo

yozotheboss said:
I downloaed SuperSU 2.02 two times from official site, but it didn't want to flash...
I think it is corrputed. After that i downloaded 1.96 and it worked.
yozo
Click to expand...
Click to collapse
I used this downloaded from official site a few months ago and it worked.

Why you use “philz_touch_6.26.6-i9305.tar” and not more new "philz_touch_6.48.4-i9305.tar"?

psychok9 said:
Why you use “philz_touch_6.26.6-i9305.tar” and not more new "philz_touch_6.48.4-i9305.tar"?
Click to expand...
Click to collapse
I used this and i didn't checked if is a new version when i talked with Yousef Khashaba.

Do you have to use a custom recovery to root kk 4.4.4 or can I just use CF-auto root and triangle away with the stock recovery?

going to test .. any one know chainfire cf-root works for i9305 or not ?

afraaa said:
going to test .. any one know chainfire cf-root works for i9305 or not ?
Click to expand...
Click to collapse
Yes it works pefectly

Raistlin1158 said:
Yes it works pefectly
Click to expand...
Click to collapse
i mean .. chainfire has i9305N for kitkat 4.4.4 ... we have i9305 no N no T ... just 9305 .. can i use 9305N for root ? they are sharing same CPU . different is software build number .. what do u suggest man .. appreciate your answer and w8 for your answer
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
PS : sry thanks button reach limit will give it tomorow . do u suggest i use chainfire or this method ?

i guess above question answer is no ...
about this OPS method : confirming root on GT-i9305 model running kitkat 4.4.4 ?