I want to root and install Custom rom on my Samsung galaxy s3 19305T on stock android 4.3
Sent from my GT-I9305T using XDA Free mobile app
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Related
Hey all!
I recently updated my phone's firmware to 2.3.5 (S5570XWKS7 firmware).
Has anyone tried downloading the recovery image from here
http://www.clockworkmod.com/rommanager
and installing it on a gingerbread firmware?
Thanks in advance!
Go here, download and flash from odin in 2 seconds last CWM for own phone ;-)
yeah works fine
lol
Tried to flash it through normal recovery (renamed to update.zip) but the screen went all fuzzy!
At least i didnt brick the phone!
quendil said:
lol
Tried to flash it through normal recovery (renamed to update.zip) but the screen went all fuzzy!
At least i didnt brick the phone!
Click to expand...
Click to collapse
well changing recovery from recovery is like to say someone kill yourself and when you finish make me a sandwitch
quendil said:
lol
Tried to flash it through normal recovery (renamed to update.zip) but the screen went all fuzzy!
At least i didnt brick the phone!
Click to expand...
Click to collapse
That simply will not work on a un-rooted phone. The stock / original recovery has very limited functionality.
Well, it's easy. Just follow this way:
1. Download the attachments to this post. (tass-recovery.cwm is the recovery, the other .rar has odin and tass.ops)
2. Put upd_1.zip on the root (On top, not in a folder) of your SD-card.
3. Boot into recovery. (When phone is powered off: Home-button + power) (Now you'll root your phone.
4. Use the volume buttons to highlight 'apply update from sdcard', then press home to select.
5. Use volume buttons to highlight 'upd_1.zip', then select with the home button.
6. Press home button to 'reboot system now'. Your phone is now rooted.
7. Power down your phone.
8. Enter download mode by pressing 'Volume down + Home button + power button.
9. Connect through USB to your PC.
10. Launch ODIN v4.38.
11. Wait for Odin to recognize your phone. (At the left, there will be a yellow box that says COM "?", the number can be different.)
12. Select Tass_v1.0.ops by pressing the 'OPS-button'
13. Make sure 'One package' is marked at the left of the window.
14. Select tass-recovery-cwm.tar with the 'One Package-button' at the bottom of your window.
15. Press start, wait 'till your phone reboots. Now you'll have ClockWorkMod-recovery installed.
then you're ready to flash any custom roms
via Public Phone ^-^
Hello,
So I have a galaxy mini s5570i version and I tried to flash recovery on it. As i realized Odin can't seem to identify this version, I might be wrong tho, god hope so. So i tried to find another way of flashing it. I managed to get root on it (with an update.zip) but I couldn't find any cwm for it, so at last I tried my luck by putting the s5570 cwm 5.2.0.8 touch recovery on it via the original recovery.
Now the phone hangs on boot logo, I assume it can't find the system partition or something like that.
I'm still able to get into stock recovery and download mode.
What are my options?
Can I get custom recovery on it via odin or sd card or somehow?
Can I get back to original Android at least via sd and downloaded stock ROM and update that?
Thanks in advance
Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!
missing parts
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.
dglteam said:
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.
Click to expand...
Click to collapse
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead
FixMyProblems said:
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead
Click to expand...
Click to collapse
yes, it turns into Download mode. but Odin did not recongnise phone. it says: odin mode..check platform verification
FixMyProblems said:
Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!
Click to expand...
Click to collapse
many many thanks to you my friend.. finally finished .. thanks a lot
sir plz guide me my phone is stuke when i start mobile
How to root your Samsung galaxy S3 Running Android 4.3 XXUGNA8
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Raistlin1158 said:
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Click to expand...
Click to collapse
my Galaxy S III i9300 not i9305
Then why are you posting in the wrong forum....
Raistlin1158 said:
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Click to expand...
Click to collapse
what about knox etc? is it safe to flash this? will knox will change from 0x0 to 0x1 after this?
godlesplay said:
what about knox etc? is it safe to flash this? will knox will change from 0x0 to 0x1 after this?
Click to expand...
Click to collapse
Yes this will trip knox, but you can use Triangle Away to reset the counter
If you are thinking of changing to custom ROMs then use CyanogenMod installer
G33k_ said:
Yes this will trip knox, but you can use Triangle Away to reset the counter
Click to expand...
Click to collapse
is there any other way to root s3 lte without rising knox?
Hi,
i got this Phone for my Girlfriend yesterday. There is 4.4.2 on the Phone. Does this work on this Version too?
Best regards
Chris
EDIT: sorry, wrong phone version.
Unterwegs @ G-Pad
To do this you would need the files listed below;
1. Download Odin 3.07
2. Samsung USB drivers
3. Download (recovery-cwmtouch-6.0.2.7-GTI8190.rar ) OR ( recovery-twrp-2.4.3.0-GTI8190.rar )
4. Finally the most important file: Enable_3_button_Boot_Recovery_GTI8190.rar
STEPS TO FOLLOW
1. Download and install Odin 3.07 to your PC
2. Install Samsung USB drivers to your PC
3. Now boot your phone to Download mode by holding (Volume down + Home + Power button)
4. Launch Odin 3.07 on PC and plug your phone via USB to your PC. Odin should detect your phone with blue icon (ID:COM) indicator
5. Using Odin 3.07, find and Install (recovery-cwmtouch-6.0.2.7-GTI8190.rar ) OR ( recovery-twrp-2.4.3.0-GTI8190.rar ) to phone if you don’t have either files pre-installed before.
6. After installing, your phone should reboot up normally and then turn it off again and repeat step 3
7. To activate or restore booting to CWM or TWRP mode, Use Odin to find and install: Enable_3_button_Boot_Recovery_GTI8190.rar
8. Once installation is complete, your phone should reboot up again normally and then turn it off again
9. Hold (Volume up + Home + power button) to boot to CWM or TWRP recovery mode. Finally your CWM or TWRP mode should boot up and display on screen in few seconds.
10. Congratulations, you have restored booting CWM or TWRP mode.
PROVIDED BY: REVOS VISION BLOG
revos_vision said:
To do this you would need the files listed below;
1. Download Odin 3.07
2. Samsung USB drivers
3. Download (recovery-cwmtouch-6.0.2.7-GTI8190.rar ) OR ( recovery-twrp-2.4.3.0-GTI8190.rar )
4. Finally the most important file: Enable_3_button_Boot_Recovery_GTI8190.rar
STEPS TO FOLLOW
1. Download and install Odin 3.07 to your PC
2. Install Samsung USB drivers to your PC
3. Now boot your phone to Download mode by holding (Volume down + Home + Power button)
4. Launch Odin 3.07 on PC and plug your phone via USB to your PC. Odin should detect your phone with blue icon (ID:COM) indicator
5. Using Odin 3.07, find and Install (recovery-cwmtouch-6.0.2.7-GTI8190.rar ) OR ( recovery-twrp-2.4.3.0-GTI8190.rar ) to phone if you don’t have either files pre-installed before.
6. After installing, your phone should reboot up normally and then turn it off again and repeat step 3
7. To activate or restore booting to CWM or TWRP mode, Use Odin to find and install: Enable_3_button_Boot_Recovery_GTI8190.rar
8. Once installation is complete, your phone should reboot up again normally and then turn it off again
9. Hold (Volume up + Home + power button) to boot to CWM or TWRP recovery mode. Finally your CWM or TWRP mode should boot up and display on screen in few seconds.
10. Congratulations, you have restored booting CWM or TWRP mode.
PROVIDED BY: REVOS VISION BLOG
Click to expand...
Click to collapse
Wrong forum my friend you need to post this information here >> http://forum.xda-developers.com/galaxy-s3-mini << in the Q&A section..
Anybody reading this do not download these files for your S3 I9300 they are for the Galaxy S3 Mini it will damage your device or brick your device
I'M NOT RESPONSIBLE IF YOUR PHONE GOT BRICKED, DO THIS AT YOUR OWN RISK!
ROOTING (CUSTOM RECOVERY + SUPERSU)
MAKE SURE YOUR PHONE’S 80% CHARGE OR ABOVE!!!
1) Download Odin.
LINK: https://www.dropbox.com/s/fivpr9btf6667hr/Odin 3.07.rar?dl=0
Download “philz_touch_6.26.6-i9305.tar”
LINK: http://goo.im/devs/mskip/recovery/samsung_galaxy_s3/philz_touch_6.26.6-i9305.tar.md5/
2) Unzip Odin to your desktop.
Copy the “philz_touch_6.26.6-i9305.tar” to the same directory.
3) Make sure your phone is in DOWNLOAD MODE.
Power OFF your phone if you haven't done so.
Press Volume Down + Home Button + Power Button.
You will see a screen saying “Warning!”
Just ignore what it says and PRESS the Volume Up button.
4) Now, connect the phone to your Windows computer/laptop.
Connect the USB cable to your phone first then to your computer.
Let it detect your phone.
5) If Kies is running on your pc shut it down.
6) Open the Odin application.
7) In the Message Box (located at the bottom left corner of Odin), you should see "Added!!" there.
8) Choose PDA button and select the "philz_touch_6.26.6-i9305.tar".
9) Now, click on START. Your phone will be flashed and reboot when it is finished.
10) After rebooting, copy “UPDATE-SuperSU-v2.02” to your SD Card.
LINK: http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
11) Power it off again.
12) Put the phone in recovery mode.
Hold down Power, Volume Up and Home when the device is turned off and unplugged and release once you see the Samsung logo.
13) After that you can flash the “UPDATE-SuperSU-v2.02” to be ROOTED to any firmware.
UN-ROOTING USING PC ODIN
MAKE SURE YOUR PHONE’S 80% CHARGE OR ABOVE!!!
1) Make sure your phone is in DOWNLOAD MODE.
Power OFF your phone if you haven't done so.
Press Volume Down + Home Button + Power Button.
You will see a screen saying “Warning!”
Just ignore what it says and PRESS the Volume Up button.
2) Now, connect the phone to your Windows computer/laptop.
Connect the USB cable to your phone first then to your computer.
Let it detect your phone.
3) Extract both files (Odin & Stock Rom) to your Desktop.
Double-click on the Odin executable file and it’ll launch.
4) In the Odin, click on PDA tab and select the Stock Firmware file you extracted to your Desktop.
5) Make sure only Auto Reboot and F. Reset Time boxes are checked in the Odin.
6) Click on Start button in the Odin and leave the rest of the work on the tool.
Your device should reboot once flashing’s done.
7) You have successfully un-rooted your S3!
USING MOBILE ODIN
1) Ensure you’re having root access using “Root Checker”.
2) Copy the Stock Firmware file to your SD Card.
3) Install Mobile Odin APK and open it.
4) Choose “Open File…”
5) Navigate to where you put the Stock Firmware and choose it.
6) Now scroll down till you see “Ever Root” and uncheck it.
7) Now tap “Flash Firmware”, you’re phone will restart and start flashing.
8) After flashing is done it’ll reboot.
9) You have successfully un-rooted your S3!
Credit goes to @SeyMedia for original aid, I just made this into a tutorial. Good Luck!:good:
root/recovery won't work that way for 4.4
as soon as you let the phone reboot into system after flashing custom recovery, it will get overwritten by original one; so after you turn the phone off and reboot manually then, don't be surprised to see stock recovery
After flashing custom recovery don't turn the phone on. Just return with 3combo to recovery and flash su. This is how worked for me
Regarding the rooting process:
- just untick F. Reset Time in Odin when you flash philz_touch_6.26.6-i9305.tar;
- when flashing is done, disconnect phone from pc and pull up the battery for a few seconds;
- put back the battery;
- enter in recovery mode (you will enter in Philz Touch);
- flash UPDATE-SuperSU-v2.02.
This will do the trick!
SeyMedia said:
Regarding the rooting process:
- flash UPDATE-SuperSU-v2.02.
This will do the trick!
Click to expand...
Click to collapse
I downloaed SuperSU 2.02 two times from official site, but it didn't want to flash...
I think it is corrputed. After that i downloaded 1.96 and it worked.
yozo
yozotheboss said:
I downloaed SuperSU 2.02 two times from official site, but it didn't want to flash...
I think it is corrputed. After that i downloaded 1.96 and it worked.
yozo
Click to expand...
Click to collapse
I used this downloaded from official site a few months ago and it worked.
Why you use “philz_touch_6.26.6-i9305.tar” and not more new "philz_touch_6.48.4-i9305.tar"?
psychok9 said:
Why you use “philz_touch_6.26.6-i9305.tar” and not more new "philz_touch_6.48.4-i9305.tar"?
Click to expand...
Click to collapse
I used this and i didn't checked if is a new version when i talked with Yousef Khashaba.
Do you have to use a custom recovery to root kk 4.4.4 or can I just use CF-auto root and triangle away with the stock recovery?
going to test .. any one know chainfire cf-root works for i9305 or not ?
afraaa said:
going to test .. any one know chainfire cf-root works for i9305 or not ?
Click to expand...
Click to collapse
Yes it works pefectly
Raistlin1158 said:
Yes it works pefectly
Click to expand...
Click to collapse
i mean .. chainfire has i9305N for kitkat 4.4.4 ... we have i9305 no N no T ... just 9305 .. can i use 9305N for root ? they are sharing same CPU . different is software build number .. what do u suggest man .. appreciate your answer and w8 for your answer
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
PS : sry thanks button reach limit will give it tomorow . do u suggest i use chainfire or this method ?
i guess above question answer is no ...
about this OPS method : confirming root on GT-i9305 model running kitkat 4.4.4 ?