Ok I know I borked my VZW gtab. I had GB2.3.4 running fine and when 2.3.5 came out I tried to flash it and some thing went wrong. Got from http://forum.xda-developers.com/showthread.php?t=1328177
Ok I think it is just soft bricked, cause I can get odin3 1.7 to recognize the gtab. And heimdall 1.1 also recognizes it, but when I tried to flash stock rom from http://forum.xda-developers.com/showthread.php?t=967175 it only gets to 31% and stops.
Thanks in advance for any help I can get
Ted
Related
I have the SGS GT-I9000M from Bell, was running Froyo 2.2
Decided today to dabble around with rooting and roms.
Followed all the directions to installed Darky's v9.2 Extreme Edition w/ Voodoo 5.4.1 kernel.
Everything went flawlessly and everything runs slick. Except for one small issue.
Now I seem to be losing network connectivity. Sometimes it will remain on "Bell", other times it will just display "No Service" or "Emergency Calls Only".
Have I missed something or done something incorrectly?
Any insight on this would be great.
Thanks in advance.
Also, is there a way to revert back to stock 2.2 if necessary?
Revert to stock via Odin
Darky problems check Darkys posts and FAQS .
jje
Tried and failed.
Went through every Darky's post I could find and can't seem to see anything like this being mentioned.
I even tried the Resurrection version, now my phone is a brick.
Does nothing but reboot over and over at the start.
Can't get into Recovery, only Download mode..
Suggestions?
Go to sam firmware.com download the android version 2.1 update 1 ughj2 or whatever its called. when its done downloading put your phone in download mode but first open up odin. select 512 pit and check repartion. Choose the firmware as pda and connect your phone to the computer and press start wait until odin finish flashing it and comeback and tell us what happened
I was able to get the phone working again, pretty much what you just said.. but with 2.2
Only issue is now I have no data network connectivity.
Zero options for it in the settings, and I've even called my cell provider..
They keep telling me to wait a few minutes and it will reconnect..
It's been a few hours..
I've been running 2.2 now for over a month with no problems but noticed it was a little bit laggy so Installed and applied the one click lag fix from the marketplace which worked beautifully. I noticed later on that my computer would no longer recognize my device which is a big problem so I did a factory reset but that didn't help at all so I decided to reflash to stock. Problem is now my phone keeps flashing the i9000m splash screen over and over. I'm flashing with I9000UGJK3.tar which is stock 2.2, ive tried repartitioning since I did have the lag fix using the s1_odin_20100512.pit file and im still stuck on this damn screen. I have no issues getting into download mode or anything like that but i've spent the past few hours reading posts on here and trying to fix this and I just can't figure it out. Help anyone?
JK3 is 2.1 if I remember right. JL2 is the 2.2 for bell phones. I think the problem is you were on JL2, which has a secondary boot loader, which means you can't flash a 2.1 rom on it. Try flashing with JL2.
According to samfirmware - I9000UGJK3 Version 2.2 2010 November. I'll try flashing with that anyways and see what happens. Thanks for replying!
Worked!!! Thanks so much! Looks like i was using the wrong version, although both were 2.2 the one you suggested worked like a charm!
Worked!!! Thanks so much! Looks like i was using the wrong version, although both were 2.2 the one you suggested worked like a charm! Well it boots up into the OS now but for some reason I can't use the internet over 3g, only wifi :S
you may have to enter your apn settings
Ok, I was at the stock Froyo 2.2 update yesterday and saw 2.3.5 GB and installed using ODIN. There's a couple of aggravating features, mainly every time I plug in via usb or AC, the tethering process crashes. I don't even use tethering and don't know how to disable this process.
Anyways, all I want to do is return to the stock AT&T froyo. I've tried several one click packages for ODIN to return to stock, I CAN get into download mode, but once its plugged into the PC it says its installing device drivers, then it always fails. I tell Windows to search, and of course it can't find any.
How can I get this to work again, all I want is my 2.2 back
Read this thread
Hi Guys,
I'm having a bit of a Problem here.
Today I Installed Cyanogen Mod to my Phone. Everything worked just fine but I didn't liked it much so I reflashed to Stock Rom.
So far so good now the Problem.
I Accedently flashed a Greece ROM (I'm from Germany) The Rom worked fine but I don't understood a word.
So I got back to Download Site and found an Austrian Version. I downloaded it and tried to Flash it to my device but at one Point The Installation got stuck.
I waitet an Hour but It weren't going any further.
I didn't saw another option to get out of this and pulled the USB Cable out.
Now the Phone is only running in Download mode.
The Recovery mode isn't available. Only a screen with a Phone a PC and an ! in the middle appears.
I already tried to install the Stock rom again (tried another one as well) But it always gets stuck at one Point.
Please help me.
Greetings
Solved. I Flashed FROYO and then Gingerbread again worked fine!
Hmm back to original Rom.
minimodx addict
I started having issues with the MIUI rom and wanted to get a different ROM. The devices menu shows for the captivate device that there is no driver. I have tried to let windows find a driver but it cannot find one and I tried installing one manually but still has the same error. My only idea is that the device name changed so it cannot find a driver. Can someone tell me what their machine says the device name is for your samsung captivate? Or if I am wrong can anyone help me out?
MIUI version: MIUI-109160
Kernal: [email protected]#1
Thank you
Have you tried a Heimdall one-click (like the one in my signature)? That should detect your phone as part of the installation process, and let you flash back to stock (with CWM) as well.
Edit: okay I got it to work. Thanks I am now back to the default. If i have any more issues I will come back. Thank you
Yeah even tho it got back to the stock it can't read the sim card now. suggestions?