Related
Hi, I have an hw6515 with a corrupted original Rom (0.92) and that it is imposible to upgrade via USB using the Huu rom upgrade application from HP. Then I´ve tried many things and discover that I can upgrade an entire image. I tried a hw6515c image, bigrom, Ipaqdisk from file farmer and everything works. Except my radio rom that is not recognized when I use the HP asset application.
So, how can I upgrade the original NBF files from HP not using activesync connection and not using HUU rom update utility from HP? How can I use the Romupdate utility (mtty) to update only Rom radio OS and Radio File system? Is there any command in DOS, Windows or Linux. How can I map the entire rom?
this cant be done with a corrupted rom i think the only thing can you do is reboot the device in bootloader mode and try it
enjoy it!!!!
***nEuEzIeL***
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
ok!!
tk3w said:
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
Click to expand...
Click to collapse
Tell me how can you change your language ??(becouse i know this cant be done )
try it with th same language of your device
enjoy it
***nEuEzIeL***
Yes, the change of language dont can be done.
but I did not know it and I have forced the flashing with an crakked program.
The flashing is go bad and now I have no image of old device.
The reflashing of the rom with upgrade of HP fail at %1 and the only way for to return at the old operative system is the restore the OS from the SD.
Please, can you share a backup of 6515d (english ) ?
Tank.
ups
no i dont have the 6515d i have the 6515b and your device are bricked you need to send to hp for a warranty or mailme to [email protected] and the topic need 6515 im from mexico and you can send me your device if you want but your device are briked
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
dim920 said:
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
Click to expand...
Click to collapse
Is better Honestly buy a new Morher Card or a New Device SEll That in a Spare pices
Hi, dim920.
I would be pleasing you of to receive material and informations about.
My email is [email protected] but you can share your package of tools also
elsewhere on the web.
Tank
Radio package 6515
For download my package with :
- Radiodump (adress 60000000 800000)
- Special hpruu for incorrect device sku or other error messages
- Beetles Radio Patch
- Bigrom
- Ntrw to write to sd
- Romupdate & mtty
- usb monitor trial
- winhex trial
- Hx 4700 bootloader to modify the header
- At command guide
go here : http://dl.free.fr/TOErXwWr/package6515rom.rar
THE Bootloader PASSWORD level 0 is : "BOOTLOADER"
the level 1 (pass1) is 0000000000000000 (zero x 16)
I exclude all official Hp rom package,
my device is french and a 6515a.
For change Your phone language,
Download special rom & read here :
http://mobilitytoday.com/forum/showthread.php?t=12231
I post in few moments all an short description of what i do
,what i think and what are the solutions for the same problem
on other device.
I try to regroup all i have for tomorrow night if you want to
speak before and have msn :
[email protected]
Tank you for your share.
I am trying to flash the rom from sd card.
I have downloaded a rom image of 6515 and I must put it in the SD card.
After to backup the PDA over SD with romupdate.exe dowloaded from :
http://www.filefarmer.com/2/dmc8742
with d2s, I have put the card ( SD 512 MB ) into card reader and ran
ntrw ( hw6515_bigrom112.zip in the link above ) for write bigrom112.nb1
into SD, but something does not work!!! My SD is blank.
I have an image of rom : IPAQROM.img and I could also try to mount it on the SD but I know that I have to use IPAQDISK.
I have tried to find it for many days on the web but I have not found it!!!!
I think that the single way for to resolve the problem is to make the flash from the SD card.
Makes to know your news me.
The single way that we have to resolve the problem is to work together.
Excuse for my English
Hi.
- For the problem of Dead Radio, nos gsm, and asset info blank,
A Classic Rom dump doesn't take the radio Gsm part.
- Flashing Bigrom or RomDump of a working device can only help you
to have extended memory on External rom, or to change language.
- When you do d2s, Romupdate format the sd in a special format when writing your rom. After copy backuped rom to your pc and finish by copy the new Rom on Sd via Ntrw. Move the sd from pc to pda, Finish via hard reset (1/Power 2/joystick down 3/Reset stay 5 sec, you see bootloader lightly, unpress in good order
1/ Reset 2/ Others. You see bootloader HP v0.21.
After few seconds "press action buttons to flash"
It's normal that the sd is blank, because it's a special formatted via d2s
for the pda can boot so pda os & os pc ask you if you wat to format.
So you can't see the file writed by ntrw, but she is ready for flash, if you follow steps & the bootloader stuck in bootloader and don't propose to flash, it's a problem of rom compatibility.
- So the D2s command don't take the gsm part.
I think we have to specify the good adress range, it's why
the file radiorom in my package is a rom dump d2s 60000000 800000 of a working device. If i copy back on the working device, he says upgrade radio stack and ok so solution is not too far.
Try it but my device don't wan't to take back this rom, stucked on "calculate checksum" on the pda and nothing never happen. If i do checksum command it's ok, but if i do a checksum 60000000 800000 he stuck too on "cal checksum".
So i think we have to erase manually with erase command & wdata, but really not sure to not brick more the devices but it's how they can solve the problem on other device...
Can't access bootloader menu on my hp 6515
How can I access bootloader menu on my hp ipaq hw 6515?
I tried all combinations POWER + Joystick + Camera + Reset
I only get a screen with message: Serial - hp - v0.21
This was because a ROM update went wrong...
Thx,
shaker308
That screen you see with Serial -HP - v0.21 IS the bootloader screen. You need to then connect the ipaq to a computer and use a terminal software to access the bootloader menu
ok... I didn't know that was the bootloader screen. I'll try what you told me.
Thanks cluurk.
shaker308
iPAQDISK.exe
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
shaker308 said:
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
Click to expand...
Click to collapse
http://blogs.unbolt.net/media/blogs/brinley/iPAQDISK.zip
found it just now.. Trying to play around with a H6365.
ipaq hw6515 dead
hi,
please help restore my device(spanish movistar hp),
it doesn't recognize Radio GSM after upgrading to 1.29sp
Radio presente: Si
Version del firmware:
Version protocolo de la radio:
Version de Cargador de inicializacion:
Version del sistema de archivo de la Radio:
Version GDFS predefinida de la radio:
Numero IMEI:
anything i can do please?
i need radio rom file to restore from sd card
i used to upgrade rom before but i dont kno wat happn suddenly lik my system shows error
popping a window statin MICROSOFT WINDOWS DIAMOND CUSTOM RUU HAS STOPPED WORKING i am usin vista ultimate the problem details are like this
Problem signature:
Problem Event Name: APPCRASH
Application Name: CustomRUU.exe
Application Version: 1.0.0.0
Application Timestamp: 483f28db
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c000007b
Exception Offset: 00008fc7
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 9d13
Additional Information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3: 9d13
Additional Information 4: 1abee00edb3fc1158f9ad6f44f0f6be8
The best solution is to try it on WinXP. I had some crashes with the hardspl with a Vista PC. If you dont want to install it, try a Virtual Machine.
marco.it said:
The best solution is to try it on WinXP. I had some crashes with the hardspl with a Vista PC. If you dont want to install it, try a Virtual Machine.
Click to expand...
Click to collapse
thnx for the reply wat do u mean by virtual machine?
try using the internal storage method or updating your ROM.
Installing from Internal Storage is the fastest and safest way to upgrade ROM.
1) Rename the ROM to DIAMIMG.nbh and copy into your internal storage
2) While pressing VolDown and Back, use your stylus to press the reset button
3) After a few seconds, it will ask you whether you want to proceed to install ROM from Internal Storage.
However, every ROM cooker recommends some type of HardSPL. You must make sure that you meet the requirement, lest you brick your TD.
Dear XDA Members,
I have now read the official Wiki five times, and I still haven't understood how to upgrade my BA to a Windows Mobile 6.
The Wiki "HTC Blueangel WM6 Home" links to a Wizard Style Wiki for this, however that link only returns a 404 Error. I also haven't found any information about this in the FAQ or orther threads. Maybe it's just me?
Where can I find a WM6 image for the BA (T Mobile MDA III)?
What software do I need to flash it via USB to the BA?
Thank you in advance.
Chris
Please refer to http://forum.xda-developers.com/showthread.php?t=630416
The instructions are there in Posts 1-6. Good luck.
Sunny
hi and welcome to the forum
as stated by sunny, my tutorial thread should cover all aspects of the upgrade process, including links to most of the recent roms.
the blueangel wiki suffered from the transfer to the new mediawiki project, which is why it should not be used for tutorials anymore.
Thank you both for your fast and helpful support.
I am running a non-english Windows Mobile 2003SE (GER) and executed the steps from your Guide to downgrade it to a WWE version. On xplode.tk I downloaded the latest T-Mobile UK Version and extracted the files mentioned in step 1b from the Temp folder while executing the .exe file. I also copied the files into the RUU folder.
When I open the task manager in step 6 i can only find and kill "wcescomm.exe"; "WCSEMgr.exe" isn't there. I am running WinXP SP3, logged in as administrator.
When I start Maupgradeut_noid anyway, I doesn't show me the rom versions.
Where am I going wrong?
Edit: I forgot to mention I have read the thread "Cant' Downgrade from Win2003 SE GER to ENG", but renaming the folder and then trying it didn't work for me either.
if you can't see those processes, you are probably not running activesync. install the latest version (a link can also be found in that thread in the 2nd post) and create a temporary partnership. just connect the device in normal running mode and set it to sync something small, like notes or favorites, after syncing go to the connection settings and untick "allow usb connections" then you should be fine and you can continue with the next step, connect in bootloader mode, make sure the display changes from serial to usb. at that point, a new driver will be installed and then running the ruu should get the upgrade process working, meaning, then there will be numbers in the 2nd window. if not, please post the RUU.log found in C:\
I have already installed ActiveSync 4.5.0.
I created a temporary partnership syncing favourites and after that unticked USB syncing in ActiveSync.
Then I connected in bootloader mode, making sure the display changed to USB V2.07. No new driver was installed, but I guess that already happened in my earlier attempts.
The HTCRUU.log (no RUU.log there) i found on C:\ contained a "Image Radio Checksum Error", so I downloaded another image from another mirror, but got the same problem.
Here is the log from the 2nd attempt:
11:50:02:843 [msg] : Config Info : [000000],[0],[0].
11:50:02:875 [err] : Image Radio Checksum Error.
11:50:02:875 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
____
I HAVE however been able to flash a WindowsMobile 6.5.3beta image to the device without formatting, so thank you for helping me with that!
I reverted back to Win2003SE, because I would still like to get the 60MB if possible.
ah, ok, apparently the radio rom is damaged and shows a crc error, since you are planning on downgrading and then upgrading, just delete the radio_.nbf from your update folder and try again.
no worries, obviously, you did nothing wrong, but there have been a lot of corrupted radio roms around lately, xplode's rom archive has them and so mine and d-two's have them as well.
in general, a first indicator for corrupted roms is the file size, a nk.nbf rom must always have 32,769kb (1kb more than 32mb) and a radio has 4,097kb (1kb more than 4mb)
you can ignore (delete) all radio roms in the process of upgrading, frankly, it has nothing to do with the operating system itself, it is just the bridge between the operating system and the hardware. if you are not running radio 1.15.00 yet, which is the latest and according to most users, the best version, you can upgrade it any time you want, so i'd suggest: try and upgrade to wm6.x first and then, when you got used to flashing, flash the radio, or, if you are satisfied with your phone's in-call sound quality, bluetooth and wi-fi performance, don't flash it at all.
Ah, ok.
I deleted the radio file and tried again. This time it showed me an ms_.nbf Checksum Error. I deleted that one as well and got this:
09:51:05:968 [msg] : Config Info : [000000],[0],[0].
09:51:05:968 [msg] : RadioFile Not Exist !
09:51:05:968 [msg] : MSystemFile Not Exist !
09:51:06:171 [err] : Image CE Checksum Error.
09:51:06:171 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
I also redownloaded the MaUpgradeUt_noID.exe right from your signature to ensure I didn't use an old one. Still the same problem.
My radio file DOES have 4,097kb; the nk.nbf has 32,769kb as well...I have to admit i'm still puzzled.
I also downloaded the two most recent radio files from your tutorial thread. Same problem: Checksum error. But I do not get a checksum error when I try to flash one of d-twos os-images.
i'm changing the radio roms, i will only provide radio 1.15.00 from now on, and i will post the entire package, as it came from htc (including the original RUU).
Thanks.
Where can I find them? Your tutorial thread seems untouched.
flash
hi WeissenbornC,
are you flashing with vista or win7??
if yes read please d-two´s tut for flashing with vista/win7.
http://forum.xda-developers.com/showthread.php?t=622768
hope it helps
cheers scudo
Hi scudo2709,
I am using Windows XP. Flashing a ROM is no problem, I have now had 5 different ROMs on my BA. However, I haven't been able to flash a shipped english rom (WM2003) in order to format the flash drive. I keep getting Checksum Errors with all of the ones I've been able to try so far.
Thank you for trying anyway.
Most of you are stuck on a yellow screen with”Emergency mode!!” or the phone is not responding at all. You guys wanted a custom rom like Optimus Prime-v2 and let me tell you, this time it will work. Optimus One P500 comes with stock android 2.2 – V10a, V10b … and android 2.2.1 – V10n. They might be done for different regions depending upon the phone release and its popularity and definitely bug fixes and enhancements. To have Prime-v2 on your handset you will require V10a or V10b on your handset. Reason, V10n stock cannot be rooted easily. Rooting the handset is must if Prime-v2 is required on the device. Steps to install V10a, V10b series. I am using Windows 7 32-bit, 3 GB RAM laptop:
1. Clean your system first; get rid of LG PC suite and other stuff shown in Uninstall Program with vendor name as LG. Remove MSXML builts from the handset. Remove Nokia and other drivers if they are on system like Ovi suite etc. I also removed a lot of Microsoft runtime environments. Not sure about the reason but it worked for me.
2. LG usb device drivers, download the application B2CAppSetup.exe http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe .
3. In the Menu Bar, click "Options & Help", and click "Country & Language". Select the appropriate Country & Language. I used India and select P500 from the list that popup after you change the country and region. It will download, install and save the drivers somewhere in C:\LGP500\USB_Driver, it will prompt to open the rar files, just click and install the exes seen in them.
4. Reboot the system.
5. Right click on Computer -> Properties -> Device Manager and see for three drivers – LG android usb modem, LGE serial usb port and LG composite USB device. Disable the modem driver and reboot once again.
6. Switch off the phone and press volume up + BACK button + POWER button. Phone should turn yellow with text “Emergency Mode!!” To switch it off you have to remove the battery (I know it hurts, but that’s the only way out here). Switch off and let’s continue with the setup.
7. To do the KDZ of system you will require the KDZ software updater, links keep going off and on internet. Try searching for “KDZ_FW_UPD_EN” or “KDZ_FW_UPD_EN.7z” in Google and download the software. It should be somewhere around 2.3 MB. To use it you will required some good version of WinZip or winrar again Google it and install the 7z archive utility.
8. Install msxml.msi as the manual or readme.txt says to do so.
9. To get the V10x Official ROM, you need to first determine the ROM of your choice. List of all firmware available for LG Optimus One P500 (list of codes) http://csmg.lgmobile.com:9002/csmg/b2c/client/ezlooks_model_list.jsp?model=LGP500 , search for your country (use IE it looks sexy in it), I looked out for IND/INDIA. Download link to the ROM is http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/XXXXX/V10a_00/V10A_00.kdz where XXXX is code from list of codes. In my case it was: AINDBK. Save the file.
10. Prepare the handset by removing the SD card and boot it to emergency mode (some are already stuck on it so reading this post…: D) using the key combination stated above.
11. Connect to the PC and it should say, installing drivers’ blah… blah … your device is ready to use now.
12. Run the KDZ updater downloaded in step 7. Select 3GQCT in Type, DIAG in PhoneMode, and browse for ROM V10a in KDZ file and hit Launch Software update. Wait for somewhere around 5-10 minutes. It should say ===FINISHED=== in the log window of updater.
13. Handset will reboot, if not wait for another 5 minutes. Unplug from USB and try to switch it on.
If you guys wants help with details on setting up the custom ROM, I mean more detailed information like above let me know. I will try to help you out.
What's about some kind of merge...
http://forum.xda-developers.com/showthread.php?p=10006406#post10006406
Yes, I think we should + I am thinking of doing detailed notes on How to Root and do the custom rom with proper steps for newbies.
Tell me what you need from me... my post is also not having stuff in bold/italics and proper links.
"[HowTo] Newbie guide to recover a dead P500"
I think if the phone can start in emergency mode is not completely dead. Here people have the realy dead phone http://forum.xda-developers.com/showthread.php?t=878286
This is very similar thread.
I sugest you to merge your thoughts with The_ERROR that has already this one:
http://forum.xda-developers.com/showthread.php?t=883314
Thread closed!
Q&A for [ROM] HUAWEI Ascend W1-U00 | v1.00
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
DerSchorsch1 said:
It seems that in this video it's described, how the sdcard-problem can be permanently solved, so that we don't have to put the card out and in after a shutdown. Is this right?
Can this be implemented in the rom?
I don't understand the steps to do in the video. I can only recognize that i has something to do with visual studio. Can someone describe it more detailed?
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
Everyone please donate, so he can buy a new gorilla glas display!
Click to expand...
Click to collapse
You did notice that this is an emulated device I hope? Rules for an emulator and for a live device are usually different.. just because a fix works in the emulator it doesn't have to work with the device.. and as far as I'm aware it doesn't.
Carrier Lock
Hi there,
Thanks for the ROM dev work!
I have a W1 which was O2 branded, after the procedure of installing the ROM, my phone has become carrier locked..
Is there an option I missed during install?
Regards,
Ed
I need help
Hello, I also use the HUAWEI Ascend W1 I come from China, I would like to know about the method of making the rom, and I open the app file will get a mbn file and do not know how to proceed, and I'm very interested in this, you can explain under it? (My English is not very good, but please forgive me use google) If you teach me, would be extremely grateful!
Hello,
thanks WojtasXda for the effort!
---------- Post added at 08:19 AM ---------- Previous post was at 08:13 AM ----------
It will be possible to install the rom from Osx or linux?
Registry tweaks from russian forum (4pda)
Here, guys, tweaks for our HUAWEI W1.
Go to \Windows\Packages\RegistryFiles and place OEMSettings.reg here.
First bootup will be ~2 minites.
Tweak list:
-Camera sound on/off in sound settings;
-Wi-Fi connection sound on/off;
-3g/Wi-Fi arrows in status bar switched on;
-Activated PfD (don't install program);
-Jailbreak(interop unlock,capabilities unlock)
-Can be installed hacked appx's from wp-seven
-SDK registered
-Search button opens google
-Any app can be placed to camera's button (e.g. OneShot)
-Now you have Nokia Lumia 920 (doesn't really work).
To make your phone 'NL920', you must mount in regedit 'SYSTEM' and install 2nd (zip). After that, you can easily install all Nokia Exclusives via SysApp Pusher (also, more apps in store!).
I think you've got a typo in the OEMSettings.reg file (inside the same-named archive), on one of the tweaks that's supposed to give file system via USB:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvn]
should be
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvc]
unless it's supposed to control the Media Transfer Protocol Subversion
Will this work with Huawei Ascend W1-U00 from Globe PH plan?
Hi.
My phone was given to me by my mother who received it with her Globe (a Philippine mobile network service provider) postpaid plan (which unusually uses prepaid services). I've been frustrated with this phone's storage becoming full very easily even though I only have very few apps (except for Spider-Man Unlimited which downloaded a 200-MB DLC) installed and I don't put any files in the phone storage. Since Huawei seemingly abandoned their Windows phones, there's no hope of us getting any update so we're stuck with the stock WP8 update 1. Will this custom ROM work with this particular W1-U00? Does anyone know where I can get a stock ROM for this particular phone?
Name: Windows Phone
Model: HUAWEI W1-U00
Software: Windows Phone 8.0
Screen Resolution: 480x800
OS version: 8.0.10211.204
Firmware revision number: 1030.5614.29400.20500
Hardware revision number: HD1U8835M Ver.B
Chip SOC version: 8230
WojtasXda said:
Hello everyone !
I have new W1, but this is U34 version. Anyone tried flashign this model? Acctually QPST shows error "Cookie (if present) not received.
Click to expand...
Click to collapse
I have the U34 and I've not been able to flash it. I always get the same cookie error in QPST, and handshake failure error in WP8 Flash Tool.
I hope you will be able to find the way to flash the U34.
You need install Windows 7, Use Qemu or Vmware. Drivers from package with QPST doesnt works in W8.
Click to expand...
Click to collapse
That's not true at all. QPST works perfectly fine on Windows 8. The only issue is if you're running a x64 OS, in which case you need to run the QPST programs as admin.
Is this ROM only in English language?
Problems with Flashing
Hello!
At First thanks for the good work. I will donate it, if i getting it work for me.
I got some Problems with flashing.
1) With Flash Tool:
Diag Setting is on, Phone is resetted and with the Flashtool i get the "Firmware Handshake Fail"-Error.
2) With QPST i can get into Download Mode (Qualcomm ... 9008) but then it shows me a "Cookie not received"-Error.
I tried the Flashtool in Downloadmode but that doesnt recognize my device.
My PC-Config:
Windows 7 Ultimate 64-Bit
Intel i5 Notebook
My Handy-FW:
Huawei W1-U00 Simlock Free
OS Version: 8.10.14203.306 Developer Preview
Thank you very much!
Edit:
I got the Problem. It only works for me without Diag Settings and only with QPST.
The folder from the Repair Bootloader was: W1-U00 Repair bootloader/flashing/
and i only copied the "flashing" folder. Now no "Cookie"-Error.
Hope this helps someone....
Step 2 error
I finish step 1. Flash custom ROM with QPST (Windows 8.1 x64).
Phone in mass-storage mode (all disk available).
Qualcomm MMC Storage USB Device present in Device manager.
When run WP8CRUU get error: Cannot open device "Qualcomm MMC Storage USB Device" Error 5 .
Whats wrong?
Problem solved:
With phone connected as mass storage reinstall Qualcomm USB drivers!
Lag issue on the scroll
Hi @WojtasXda, I installed this wonderful ROM yesterday and everything is working perfectly THANK YOU SO MUCH <3
but when I scroll something with the finger always placed in the screen it lags a bit.
Huawei Ascend W1-U00
If you could help me to find a fix I thank
Error 109 on WP8CRUU.exe
Does v1.10 require v1.00 flashed first? I'm getting an error 109 (Cannot open device Qualcomm MMC Storage USB Device) when I run WP8CRUU.exe. My phone's (W1-U00) already in mass storage mode.
Now, I'm getting an error 5 (Cannot open device Qualcomm MMC Storage USB Device).
Can anyone please help me with this? I was able to flash the ROM with mass storage mode capability and set my phone to mass storage mode. Now, I can't flash the custom ROM because of this error. I don't think I missed anything. I'm running this on a Windows 7 Ultimate 64-bit. I didn't install MS Visual Studio 2013 since it requires Windows 8.1. I did install the Qualcomm USB drivers, simpleio, and QPST. I have MS Visual C++ 2005, 2008, and 2012 (all 32-bit) installed.
Arhy's workaround didn't work for me, by the way.
personal settings/data
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
blonder_andi said:
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
Click to expand...
Click to collapse
Try going to Settings -> backup.
tempname said:
Try going to Settings -> backup.
Click to expand...
Click to collapse
Thanks for the reply...
As far as is can see you just can backup fotos, messages, and IE-settings.
(no contacts, calender-information, certificates,...)
Is there another way to get at least my contacts from WP8 to WP8.1?
An additional question:
Is it possible to get back to WP8 after flashing the WP8.1 rom?
Any hints welcome
best regards
andi
install HUAWEI Ascend W1-U00 | v1.10
Hi, i try to install these rom.
To install that i do this steps:
1) Enter Qualcomm emergency mode
2) Click Start>All Application>QPST>QPST Configuration and configure phone
3) Start>All Application>QPST>eMMC Software Download，Click “Load Build Contents…” Select contents.xml in unrared W1-U00(C00)Repair bootloader.rar，Check "Program Boot Loaders",UnCheck "Program MMC device", Click Download
4) After complete, the port will change into Qualcomm HS-USB Diagnostics 9006
5) UnCheck Program boot loaders，Check Program MMC device，Select Qualcomm MMC port，Click Download again.
6) Wait for it to complete, disconnect phone.
7) Press and hold "vol -" then also press and hold Power button and connect the phone to the computer, now the device manager will display WP8 UEFI USB SimpleI/O Port.
8) Run Flash Tool , select ROM file / Config XML and click "Scan && Download".
9) When phone displays 100%, and the inscription OK. The process of flashing rom is complete. Now you need Reset the phone (press power button on 15 sec or remove battery). Flash tool displays information about the bad file FFU, just ignore it
10) Run device in mass storage mode
11) Run WP8CRUU.exe... BUT
No instrunction, only black console. when i close the console the copy begin.. but stop at 45% with "Error: cannot write 5 file. Error 5"
Suggestion?
SOLVED: must be waiting on the black console
I can not find Data\\PROGRAMS\\WINDOWSAPP directory，how can I get full FS access ？