some 1 plz help me with rom upgrading - Touch Diamond, MDA Compact IV General

i used to upgrade rom before but i dont kno wat happn suddenly lik my system shows error
popping a window statin MICROSOFT WINDOWS DIAMOND CUSTOM RUU HAS STOPPED WORKING i am usin vista ultimate the problem details are like this
Problem signature:
Problem Event Name: APPCRASH
Application Name: CustomRUU.exe
Application Version: 1.0.0.0
Application Timestamp: 483f28db
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c000007b
Exception Offset: 00008fc7
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 9d13
Additional Information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3: 9d13
Additional Information 4: 1abee00edb3fc1158f9ad6f44f0f6be8

The best solution is to try it on WinXP. I had some crashes with the hardspl with a Vista PC. If you dont want to install it, try a Virtual Machine.

marco.it said:
The best solution is to try it on WinXP. I had some crashes with the hardspl with a Vista PC. If you dont want to install it, try a Virtual Machine.
Click to expand...
Click to collapse
thnx for the reply wat do u mean by virtual machine?

try using the internal storage method or updating your ROM.

Installing from Internal Storage is the fastest and safest way to upgrade ROM.
1) Rename the ROM to DIAMIMG.nbh and copy into your internal storage
2) While pressing VolDown and Back, use your stylus to press the reset button
3) After a few seconds, it will ask you whether you want to proceed to install ROM from Internal Storage.
However, every ROM cooker recommends some type of HardSPL. You must make sure that you meet the requirement, lest you brick your TD.

Related

Update Rom Radio

Hi, I have an hw6515 with a corrupted original Rom (0.92) and that it is imposible to upgrade via USB using the Huu rom upgrade application from HP. Then I´ve tried many things and discover that I can upgrade an entire image. I tried a hw6515c image, bigrom, Ipaqdisk from file farmer and everything works. Except my radio rom that is not recognized when I use the HP asset application.
So, how can I upgrade the original NBF files from HP not using activesync connection and not using HUU rom update utility from HP? How can I use the Romupdate utility (mtty) to update only Rom radio OS and Radio File system? Is there any command in DOS, Windows or Linux. How can I map the entire rom?
this cant be done with a corrupted rom i think the only thing can you do is reboot the device in bootloader mode and try it
enjoy it!!!!
***nEuEzIeL***
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
ok!!
tk3w said:
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
Click to expand...
Click to collapse
Tell me how can you change your language ??(becouse i know this cant be done )
try it with th same language of your device
enjoy it
***nEuEzIeL***
Yes, the change of language dont can be done.
but I did not know it and I have forced the flashing with an crakked program.
The flashing is go bad and now I have no image of old device.
The reflashing of the rom with upgrade of HP fail at %1 and the only way for to return at the old operative system is the restore the OS from the SD.
Please, can you share a backup of 6515d (english ) ?
Tank.
ups
no i dont have the 6515d i have the 6515b and your device are bricked you need to send to hp for a warranty or mailme to [email protected] and the topic need 6515 im from mexico and you can send me your device if you want but your device are briked
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
dim920 said:
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
Click to expand...
Click to collapse
Is better Honestly buy a new Morher Card or a New Device SEll That in a Spare pices
Hi, dim920.
I would be pleasing you of to receive material and informations about.
My email is [email protected] but you can share your package of tools also
elsewhere on the web.
Tank
Radio package 6515
For download my package with :
- Radiodump (adress 60000000 800000)
- Special hpruu for incorrect device sku or other error messages
- Beetles Radio Patch
- Bigrom
- Ntrw to write to sd
- Romupdate & mtty
- usb monitor trial
- winhex trial
- Hx 4700 bootloader to modify the header
- At command guide
go here : http://dl.free.fr/TOErXwWr/package6515rom.rar
THE Bootloader PASSWORD level 0 is : "BOOTLOADER"
the level 1 (pass1) is 0000000000000000 (zero x 16)
I exclude all official Hp rom package,
my device is french and a 6515a.
For change Your phone language,
Download special rom & read here :
http://mobilitytoday.com/forum/showthread.php?t=12231
I post in few moments all an short description of what i do
,what i think and what are the solutions for the same problem
on other device.
I try to regroup all i have for tomorrow night if you want to
speak before and have msn :
[email protected]
Tank you for your share.
I am trying to flash the rom from sd card.
I have downloaded a rom image of 6515 and I must put it in the SD card.
After to backup the PDA over SD with romupdate.exe dowloaded from :
http://www.filefarmer.com/2/dmc8742
with d2s, I have put the card ( SD 512 MB ) into card reader and ran
ntrw ( hw6515_bigrom112.zip in the link above ) for write bigrom112.nb1
into SD, but something does not work!!! My SD is blank.
I have an image of rom : IPAQROM.img and I could also try to mount it on the SD but I know that I have to use IPAQDISK.
I have tried to find it for many days on the web but I have not found it!!!!
I think that the single way for to resolve the problem is to make the flash from the SD card.
Makes to know your news me.
The single way that we have to resolve the problem is to work together.
Excuse for my English
Hi.
- For the problem of Dead Radio, nos gsm, and asset info blank,
A Classic Rom dump doesn't take the radio Gsm part.
- Flashing Bigrom or RomDump of a working device can only help you
to have extended memory on External rom, or to change language.
- When you do d2s, Romupdate format the sd in a special format when writing your rom. After copy backuped rom to your pc and finish by copy the new Rom on Sd via Ntrw. Move the sd from pc to pda, Finish via hard reset (1/Power 2/joystick down 3/Reset stay 5 sec, you see bootloader lightly, unpress in good order
1/ Reset 2/ Others. You see bootloader HP v0.21.
After few seconds "press action buttons to flash"
It's normal that the sd is blank, because it's a special formatted via d2s
for the pda can boot so pda os & os pc ask you if you wat to format.
So you can't see the file writed by ntrw, but she is ready for flash, if you follow steps & the bootloader stuck in bootloader and don't propose to flash, it's a problem of rom compatibility.
- So the D2s command don't take the gsm part.
I think we have to specify the good adress range, it's why
the file radiorom in my package is a rom dump d2s 60000000 800000 of a working device. If i copy back on the working device, he says upgrade radio stack and ok so solution is not too far.
Try it but my device don't wan't to take back this rom, stucked on "calculate checksum" on the pda and nothing never happen. If i do checksum command it's ok, but if i do a checksum 60000000 800000 he stuck too on "cal checksum".
So i think we have to erase manually with erase command & wdata, but really not sure to not brick more the devices but it's how they can solve the problem on other device...
Can't access bootloader menu on my hp 6515
How can I access bootloader menu on my hp ipaq hw 6515?
I tried all combinations POWER + Joystick + Camera + Reset
I only get a screen with message: Serial - hp - v0.21
This was because a ROM update went wrong...
Thx,
shaker308
That screen you see with Serial -HP - v0.21 IS the bootloader screen. You need to then connect the ipaq to a computer and use a terminal software to access the bootloader menu
ok... I didn't know that was the bootloader screen. I'll try what you told me.
Thanks cluurk.
shaker308
iPAQDISK.exe
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
shaker308 said:
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
Click to expand...
Click to collapse
http://blogs.unbolt.net/media/blogs/brinley/iPAQDISK.zip
found it just now.. Trying to play around with a H6365.
ipaq hw6515 dead
hi,
please help restore my device(spanish movistar hp),
it doesn't recognize Radio GSM after upgrading to 1.29sp
Radio presente: Si
Version del firmware:
Version protocolo de la radio:
Version de Cargador de inicializacion:
Version del sistema de archivo de la Radio:
Version GDFS predefinida de la radio:
Numero IMEI:
anything i can do please?
i need radio rom file to restore from sd card

can't format extRom..

hi people...
i tried to install a wm5 and a wm6 rom in a qtek 9090 but i can't format and merge ExtRom... i tried to use the rom unlocker found in the a77ila wm5 rom pack but i have a lot of error during unlock.. and when i try to format this error will show: FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed!
i tried with xda-developer unlocker but an unable to find exe file will show..
and repart_doc still not work...
anyone can help me?
my device:
qtek 9090
SO WM2003SE ver. 4.21.1088 (Build 15045.2.6.0)
ROM : 1.40.04ITA
Radio: 1.12.00
Prot Ver: 1337.42
ExtRom ver: 1.40.153 ITA
tnx in advance... and sorry for my bad english
1. You cannot reformat extROM without unhiding and unlocking it first. Follow the procedure step by step. (remeber aboutsoft reset
2. Correct links to both tools as well as the procedure you can find on Wiki (http://wiki.xda-developers.com/index.php?pagename=Helmi - Installation)
3. Report effects.
3b. Your english is OK
here i am...
followed tutorial step by step...
1. installed the unlocker
2. launched unhide
3. soft reset
4. launched unlock
5. system displays a windows named debug showin ERROR: press OK
6.another system window named debug showin FL_IOCTL_BDTL_HW_PROTECTION press ok
7. another window saying a peripheral connected to system in not working press ok
8. a debug window saying extrom unlocked
9. soft reset
10. launched repart_doc
11. error window saying "FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" press ok
tried also without soft reset at point 9. same results..
i only see Ext_Rom in memory page of Setting but still remain full
------------------------------------------------------------------
Finally solved...
i don't know why but ita extrom can't be formatted...
so i used an escamotage... upgraded qtek9090 with this rom BA_TMNL_14200_119_11300_Ship
After used unlocker and repart_Doc and all goes on....
now go to upgrade to HELMI_BA_WM6_R0_Public
hiya
i cannot format my DOC too, i got the same error ,
i used TASK 28 under MTTY , but still i'm getting this error.
anyone can help with this problem ?
Hiya
I was searching XDA-DEVELOPERS website about 2 days to find a solution for this problem, I have an I-mate PDA2K, i used all EXTROM tools on this website like this:
1- Installed EXTROM_tools,
2- run UNHIDE ,
3- then run UNHIDE,
4- Soft Reset,
5- now i can see Extended_ROM on my file explorer, i can read it , and able to write on it ... copy paste ...
6- run REPART_DOC.exe on my device,
7- tried many sizes like 128kb, 1024, 2048, 512, 61000, .................
but on this step i always get the god damned FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed,
i finally used Task 28 under MTTY but nothing happened, still have this problem,
No Wayyyyyy ! No wayyyyyyyyyy to repart my DOC size, .... noooooooooooo wayyyyyyyyyyyyyyyy
anyone going to help me plzzzzzzzzzzz ?
try it in this order...
1. downgrade to 2003
2. in WM2003 unlock... unhide... softreset
3. then repart_doc...
4. then upgrade to WM5/WM6
PS:
@Borbor...
hmm... i cannot see any part on your post that you tried to UNLOCK the extrom.
mastermoon DID. you need to unlock it first in order to modify it.
unhiding it just simply makes it visible to filemanagers.
SilverSamurai said:
try it in this order...
1. downgrade to 2003
2. in WM2003 unlock... unhide... softreset
3. then repart_doc...
4. then upgrade to WM5/WM6
PS:
@Borbor...
hmm... i cannot see any part on your post that you tried to UNLOCK the extrom.
mastermoon DID. you need to unlock it first in order to modify it.
unhiding it just simply makes it visible to filemanagers.
Click to expand...
Click to collapse
Hiya
I'm not a braincracked one, I'm a computer software engineer and i write CNC machines programs, so i don't need to someone to teach me instructions !!!! i did all, but i got FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed. !
find me a good solution plz !
and i thought landmark's the only one who is bossy...
if you dont need instructions then what are you looking for in here??? duh!!!
you're both at the same level of intelligence... are we downgrading humans now?
P.S.
look at the end of the third post... that is solved.
Everybody is allowed to name themself software engineers nowadays?
Please people start behaving like grown up's we are no longer in kindergarten.
Please:
- listen to each other
- be prepared to be wrong
- try explaining your problem in another way
- but most of all don't try to solve your listening problems by yelling and cussing to each other.
TIA, Flar

HardSPL Crashes windows 7

Hi all,
My hardspl crashes in windows 7 ultimate 32bit.
Any thoughts what I'm doing wrong?
Application Version: 0.0.0.0
Application Timestamp: 21000000
Fault Module Name: Rhodium-HardSPL_V2_00R3.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 21000000
Exception Offset: 000000c4
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Htchanes said:
Hi all,
My hardspl crashes in windows 7 ultimate 32bit.
Any thoughts what I'm doing wrong?
Application Version: 0.0.0.0
Application Timestamp: 21000000
Fault Module Name: Rhodium-HardSPL_V2_00R3.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 21000000
Exception Offset: 000000c4
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Click to expand...
Click to collapse
Hi try running exe as administrator
Thanks for the speedy reply
New error
roblem Event Name: BEX
Application Name: Rhodium-HardSPL_V2_00R3.exe
Application Version: 0.0.0.0
Application Timestamp: 21000000
Fault Module Name: Rhodium-HardSPL_V2_00R3.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 21000000
Exception Offset: 000000c4
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Regards
hanes
re-download the HardSPL again. Right click and run as admin as stated above but under the compatibility tab select Windows XP. See if that works for you.
Thanks for the responses, but still no success
Set comp. to Windows XP Pack 2
Run as adim (I'm always in admin mode anyways, but set it there just incase)
and still same
stopped working error
Regards
Hanes
i had this once or twice.....i just disabled all antivirus\firewall n other security stuff....n it worked fine
try disabling the UAC
Great info everyone but....
I've disabled UAC (should have done that a long time ago) and still error.
Nuked all the virus and firewall... and still error
Any more?
Regards
Hanes
Htchanes said:
Great info everyone but....
I've disabled UAC (should have done that a long time ago) and still error.
Nuked all the virus and firewall... and still error
Any more?
Regards
Hanes
Click to expand...
Click to collapse
"format c:"
Sounds like it could be a problem with your PC/installation. HardSPL is usually fine on Win7.
ScooterG said:
"format c:"
Click to expand...
Click to collapse
hehehehe
Haha fun guyz.
Still no luck for the Hardspl and my pc.
When you have Windows7 Profession, Enterprise, or Ultimate you can try it in "Windows XP Mode" (Not to be Confused with Compatiblity Mode).
"microsoft.com/windows/virtual-pc/download.aspx"
(I cant post links now, so just Copy&Paste it in you Adress Bar)
Google a bit for "Windows XP Mode" if you want how to use it, i´m too tired now....
I have the same problem and tried everything mentioned here before, but it didn't work.
Then I ran the Rhodium-HardSPL_V2_00R3.exe in XP Mode and it works, but I seems to be impossible to install Active Sync 4.5 in XP Mode...
Shani Ace said:
I have the same problem and tried everything mentioned here before, but it didn't work.
Then I ran the Rhodium-HardSPL_V2_00R3.exe in XP Mode and it works, but I seems to be impossible to install Active Sync 4.5 in XP Mode...
Click to expand...
Click to collapse
If you put your phone in bootloader mode, as long as the drivers are loaded for the "device" you can do whatever needs to be done without activesync.
:OTHER OPTION:
Go buy a cheap xp computer
please post your questions/problems about hardspl in the appropriate thread, not start a new one.
thread closed, not rom development.

flash tells me it isn't a BA, when I know it is

I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?
for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416
These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,
Is d-two's manual, the HTC service manual in you sig?
no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts

HardSPL stopped working? Help!

Ok, so I tried using hardSPL, and I keep getting an error message as soon as I launch the program saying that it stopped working. Im using windows 7 premium home edition. I read through the forum on HardSPL, and nothing fixed this problem. No antivirus software was running, or firewalls. Does anyone have any advice? Anything at all would be very much appreciated....
I followed this to the T and had no issues using windows 7. I noticed you stated you read through the HardSpl forum but did not see if you attempted to use this guide. Based on a few assumptions, on the forum you posted in, hopefully this helps.
http://forum.xda-developers.com/showpost.php?p=5084595&postcount=1132
shiftylock said:
Ok, so I tried using hardSPL, and I keep getting an error message as soon as I launch the program saying that it stopped working. Im using windows 7 premium home edition. I read through the forum on HardSPL, and nothing fixed this problem. No antivirus software was running, or firewalls. Does anyone have any advice? Anything at all would be very much appreciated....
Click to expand...
Click to collapse
Hm... that's very strange. I'm also running on Windows 7 and I had no problems at all. Are you sure literally everything was turned off? I know my computer came with McAfee for free and it was being TOO good. I had to go into it and disable every little thing to get it to work. Maybe try that and see what happens... security programs always give a big fuss with this. Also, make sure you have the enablerapinew.cab installed on your phone, it doesnt say that in some of the walkthroughs.
Im positive everything is turned off. The second I try to open the program, it says it stopped working. I don't see any menus or anything. When I clicked the "additional details" box, here's what came up
Problem Event Name: BEX
Application Name: Rhodium-HardSPL_V2_00R3.exe
Application Version: 0.0.0.0
Application Timestamp: 21000000
Fault Module Name: Rhodium-HardSPL_V2_00R3.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 21000000
Exception Offset: 000000c4
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
did you try running it as an Administrator? if not try downloading it again on a different computer or try the Old HardSPL good luck
Please post in the existing thread rather than creating a new one.
Thanks
Dave

Categories

Resources