Database Develop

SetCPU for Root Users [2.2.4] Undervolting and more 07/07/2011

ROM developers: Please do not include SetCPU in your ROM. I appreciate the work you're doing, but link to this thread instead, and I'd really appreciate it if you mention that SetCPU is available on the Android Market.
SetCPU is a CPU speed tweaking application for Android. More specifically, it allows control of certain aspects of the Linux cpufreq driver, allowing for overclocking, underclocking, or tweaking speeds and settings on many Android devices. It will work with most if not all rooted Android 1.5/1.6/2.0/2.1/2.2/2.3/3.0/3.1 builds on most devices.
The program is free here for XDA members. It costs 1.99 on the Android Market and available for purchase on the Amazon Appstore for users in the US.
QR code (please donate by buying it on the market ):
Warning: Extremely low or higher than normal frequencies may freeze your phone. Especially high frequencies (such as those enabled in certain custom kernels) have a risk of shortening the life of your phone. If your phone freezes, just yank out the battery.
Please buy it on the Market to donate if you like it.
Documentation and more information can be found here: http://www.setcpu.com/
Changelog:
1.4.0: Revamped the main interface quite a bit, and fixed a few minor bugs.
1.4.0a: fixed a bug where 122MHz was being called 128MHz.
1.4.1: * Using Eclair API. Will work on QVGA devices (Tattoo) and WVGA devices (Sholes)
* Major performance enhancements - setting frequencies should be much faster in every situation (in the main application, profiles, upon startup, etc.).
* Added a small home screen widget that shows the current maximum and minimum frequencies. Clicking this widget launches SetCPU.
* Frequency lists for Snapdragon devices, Samsung Galaxy, Motorola Cliq, and HTC Tattoo have been included, though support for these devices is experimental. The device can be selected on the introduction screen.
* Custom frequency lists are now supported. To enable custom frequencies, place a file called setcpu.txt on /sdcard/ or /system/sd/, sorting frequencies in kHz, separated by comma, from lowest to highest, then select the corresponding option on the introduction screen.
* There is no longer a "set" button - changing the seekbar positions will immediately set the frequency. As a result, all seekbars in the application will now snap back if the user attempts to place the maximum frequency below minimum.
* Instead of refusing to work at all, SetCPU will now operate in a read-only mode if root access is not detected.
1.4.2: Instead of choosing between performance (always max) and ondemand CPU governors, there is now a drop down list with all the available governors on the device. Thanks morfic! Added CPU scaling configurations for the OMAP3 processor of the Motorola Sholes/Droid/Milestone. This is strictly in beta. Custom frequency list now reads from /system/setcpu in addition to setcpu.txt on SD FAT or EXT.
1.4.3: Includes compatibility fixes for HDPI devices and UI enhancements. Frequency lists for the Samsung Moment (untested), the T-Mobile Pulse, and the Acer Liquid have been included. The application will no longer sometimes re-set CPU frequencies upon launch.
1.4.3a: Added more frequencies for the Nexus One.
1.4.3b: Fixed a widget issue on the Nexus One. Sorry for the rather rapid succession of updates the past few days!
1.4.3c: Adds support for 600MHz kernel patches on the Motorola Droid. On the Droid configuration. SetCPU will attempt to detect the existence of 600MHz and adjust the frequency list accordingly.
1.4.4: Adds an "autodetect" option that works on newer kernels (at the bottom of the device selection screen). This should enable the supercharged speeds in some of tasmanian_droid's newer kernels. Fixes a force close crash when selecting some frequency lists that were not compatible with the device (thanks Julian).
1.4.5: - Streamlined/refactored profiles code.
- Added "battery temperature" profile. SetCPU is now able to set a certain speed when the battery goes above a user-defined threshold. This would optimally be set to throttle the CPU lower at a high temperature. To ensure compatibility with your device, see if a valid temperature is displayed in the "System Info" menu. This profile does not take effect immediately and does not replace being cautious - it is not based on CPU core temperature, and must wait for a battery state change before reacting.
- Added an "About" button to the main screen with simple themes. Default color scheme is now "Dark"
- Adjusted the widget to display four digit speeds properly (thanks Berzerker).
- Various bugfixes and UI tweaks.
1.4.6: Fixed issues with the battery profile. Included a much better icon thanks to Josh Deere (dphase).
1.5.0: * CPU governors can now be defined in profiles.
* Included a notifications service for profiles - turn this on using the relevant checkbox in the profiles menu.
* Profiles now log which speed and governor is being set.
* Added "advanced" tweaking capability for conservative governor.
* The system info menu and profiles menu now show temperature in both Celsius and Fahrenheit, and the widget also now displays battery temperature in Celsius and Fahrenheit.
* Added a "long benchmark" option to the system info menu, which should be more consistent than the "short benchmark."
* Also added a simple stress test to the system info panel to test the stability of overclocks.
* Autodetect is now the default for devices that support it, and will be the first option in the menu if available.
* Improved I/O performance.
* Various bugfixes, especially in profiles.
1.5.0a: * Charging profile now no longer takes effect when the phone is at 100% battery and unplugged.
1.5.1: * Two more battery profiles added. Lower battery readings will always take priority (eg. under 80% will always take priority over under 100%).
* Governor will now refresh alongside the other readings. Added governor reading under current frequency reading.
* Added an auto-refresh checkbox to the main screen. If checked, SetCPU will periodically refresh the current frequency reading without the need for pressing the refresh button. This checkbox applies to the system info panel as well.
* Tweaked the widget, and attempted to fix the elusive bug where the widget did not update correctly sometimes.
1.5.1a: * Fixed widget being cut off in landscape mode.
* Fixed Fahrenheit temperature reading in profiles.
1.5.2: * Added optional failsafe notification warning system that plays a ringtone and flashes the LED red when the failsafe profile is active (thanks WootRoot!).
* Added "copy to clipboard" function for the System Info menu (press Menu).
* Added an optional "active" widget, which will refresh CPU speeds at an interval like the main interface.
* Added support for the OMAP3 temperature sensor for the Droid. If present, use of the OMAP3 temperature sensor can be enabled in the failsafe profile.
* If available, the OMAP3 temperature can also be read in the system info menu.
* CPU temperature settings will only appear if the sensor is present and support for the temperature sensor is enabled in the kernel! Right now, this is only for the Droid.
* The about menu now defaults to a "default" theme where SetCPU will not mess with any backgrounds defined in the XML layout.
* Fixed stress test failing when JIT is enabled.
1.5.2a: * Temperature sensor used in the widget for the Droid is now controlled by the failsafe setting. I will implement a proper appwidget configuration activity in a later update.
* Fixed an issue with the audible warning notification not being properly dismissed.
* Profiles optimizations.
1.5.3: * Memory/performance footprint decreased.
* Battery drain should be fixed on the Droid.
1.5.3a: * Active widget CPU usage optimized.
* Further profiles optimization for the Droid.
* Uncommon I/O force close fixed.
1.5.4: * Switched to the Android 2.2 SDK.
* Enabled external storage support (install location is automatic).
* Eliminated the distinction between the active and passive widgets, and replaced it with an appwidget configuration activity for the widget, allowing the user to choose the color of the max/min text, temperature display, temperature sensor (Droid), and refresh interval.
* Optimized the active widget refreshing.
* SetCPU will now hide non-autodetect frequencies by default on devices where autodetect is available, but hard coded frequencies and the custom option can be re-enabled with a button.
* Custom frequency list can now read from this exact file: /data/local/setcpu (in addition to the previous setcpu.txt on SD fat or ext).
* Includes various bug fixes and minor UI changes.
1.6.0: * Ported parts of the app to the NDK to improve performance.
* Fixed a bug where the widget was resetting colors upon reboot or launcher orientation change.
* Autodetect now works for all devices. It is recommended by default.
2.0.0: * User interface has been completely redesigned, and now uses tabs for switching between menus instead of buttons. Landscape mode in the main tab no longer requires scrolling down. The Advanced menu and Profiles menu have also been redesigned for a better landscape experience.
* The "auto-refresh" option and refresh button in the main interface and system info menu have been retired - SetCPU always auto-refreshes automatically.
* The profiles menu and service have been recoded from scratch, and now allows the creation of unlimited profiles with custom priorities. The "priority" meter for each profile determines the order in which it is evaluated - if two profiles apply to a given situation, the profile with the higher priority will be set. If you had profiles set before 2.0.0, you will need to set them again.
* Profiles have been further optimized for performance footprint as a result of the re-structure.
* Added "Charging AC/Full" and "Charging USB/Full" profile conditions to distinguish between fast charging and slow charging modes on some devices (thanks Julian).
* Added a beta "perflock disabler" feature that will enable frequency changing on stock HTC 2.6.29 kernels. Access the perflock disabler this by pressing Menu in the main interface. If this gives you an error, does not work, or crashes your phone, your kernel is not compatible - pull your battery to reset if necessary. E-mail me with your ROM, phone model and kernel information in "System Info" (thanks to Richard for a lot of help with the low-level stuff, and no thanks to HTC for implementing perflock in such a way . To access the perflock disabler, press Menu in SetCPU's main interface.
* Code cleanup and more.
* A big thanks to everyone who tested, especially those who gave feedback on this one, all the people who purchased SetCPU from the Android Market, as well as all my users.
2.0.0a: * Fixed a permissions error that was causing SetCPU to autodetect incorrectly and force close on some ROMs.
2.0.0b: * More fixes, sorry guys.
* Fixed an issue with profiles and custom frequency lists.
* Clarified the profiles priorities introduction.
* Fixed a bug with the Advanced menu erroneously reporting values if the governor was changed after onResume was called, and fixed a crash that sometimes occurred as a result.
* Fixed a bug where the passive widget acted like the active widget after frequencies were manually set.
2.0.0c: * Fixed issues with the Advanced menu and Advanced settings not being
applied on boot.
* Fixed an issue in where temperature warnings were not being dismissed
properly.
* SetCPU 2.0.0 no longer force closes on Android 1.5 devices, but the UI in
some menus is flawed. I recommend that you update to a more recent version of
Android if possible.
2.0.1: * Added a few widget backgrounds. Configure this when adding the widget.
* Added the ability to "swipe" to the next tab.
* Fixed various bugs.
* New documentation is up.
2.0.2: ** End of life for Android 1.5 support.
- Perflock disabler support for HTC-kernel 2.6.32.15.
- New native benchmark button in the system info menu. The results of this benchmark is unaffected by VM optimizations like JIT, so it's ideal for speed comparisons across different devices.
- Added support for tweaking the "min sample time" of the interactive governor, if available.
- Fixed a bug where the scaling governor would not change when the profile switched and SetCPU's main tab was visible.
- Fixed an ANR bug in the "set on boot" function which sometimes caused the Advanced settings to not apply.
- Fixed an issue where SetCPU sometimes did not start on boot when used with Superuser Permissions 2.2.x.
- Fixed a force close issue that occurred when SetCPU could not autodetect frequencies due to permissions errors in the ROM.
2.0.3 - Added a "safe mode" function that prevents SetCPU from running any tasks during boot if a file called "setcpu_safemode" exists in /sdcard or /data/local. This is useful if unstable settings were saved with "set on boot" checked.
- Reverted changes originally made to compensate for the old Superuser Permissions startup bug. SetCPU should perform startup tasks expediently again.
- Perflock disabler has been tested to be stable on supported kernels. The perflock disabler menu now has a "set on boot" function. Always disable this when switching to a new kernel or ROM. If you forget to do this and you get crashes, you can use the safe mode function above to disable it.
- Fixed crash issues with read-only (no root) mode, and disabled perflock disabler in read-only mode.
- Fixed a crash related to the widget service.
2.0.4 - Added the ability to back up and restore profiles to and from the SD card by pressing the Menu button in the Profiles tab. A "send" option is also available to send the profiles file as an attachment. Save the .setcpudb file to the SD card to restore it.
- Added perflock disabler support for HTC kernels 2.6.32.17 and 2.6.32.21 (T-Mobile G2, myTouch HD, Desire Z, Desire HD). "Set on boot" will not yet work on these devices because they only have temporary root.
- Fixed another crash in the widget.
2.1.0 - Significant UI and user experience revamp, including a new background for the widget, and new notification icons
- Added a quick priority swap button to the profile lists
- Significantly improved the reliability of autodetect on certain kernels
- Numerous bug fixes and crash fixes
2.1.1 - Fixed an issue with profiles backup in CM7.
- Added support for the Motorola Xoom, Atrix 4G, and other Tegra 2 devices.
- Fixed various bugs.
- Tablet optimized UI and more profiles coming soon!
2.1.1a - Fixed the 0 MHz display issue on some devices.
2.1.2 - Minor update. Adds a time of day based profile which will trigger based on a set time range. Fixes a bug with profiles and certain dual core kernels. Switched to the Android 3.0 SDK. Note that on some Tegra 2 kernels, scaling is completely controlled by the driver.
2.1.2.1 - Fixed a crash that occurred when updating from certain versions of the profiles database.
2.1.3 - Added perflock disabler support for HTC kernel 2.6.35.10 (in beta). Enhanced the Time in State readings in the System Info menu to include percentages. Removed WiFi permission until this feature is added to profiles. Fixed another database crash, and other bugfixes.
2.1.4 - Revamped Info tab UI. In portrait, clicking on an item in the Info tab will launch information on that category, and pressing back will return to the menu. In landscape, the content and the menu are split into two columns. Benchmarks are at the bottom. Added a chart for Time In State readings. Widget reliability fixes and optimizations. The main screen now indicates which kind of profile is currently active with an icon. Miscellaneous bugfixes and optimized performance.
2.2.0 - Added an "In Call" profile. Improved the Set on Boot safemode function by including a flashable zip that toggles SetCPU's safemode. Press menu on the main tab for more details. Added autodetect support for all Tegra 2 fakeShmoo kernels (ie. G2x). Added a "Voltage" tab for undervolting the CPU on fakeShmoo kernels, some custom Galaxy S kernels, and some Nexus S kernels. This is a full-fledged interface for undervolting these devices, and includes backing up and restoring and a Set on Boot checkbox. Improved the way SetCPU initially requests root. Various miscellaneous bugfixes.
2.2.1 - Fixed the voltage force close bug on some Galaxy S devices by adding undervolt support for older Galaxy S undervolt kernel patches. Added perflock disabler support for HTC kernel 2.6.35.9 (beta).
2.2.3 - Fixed an issue where the voltage menu displayed frequencies backwards on certain devices capable of voltage control. Added support for additional CPU temperature sensors.
2.2.4 - Improved support for the new MSM 8x60 devices (such as the HTC EVO 3D and Sensation).

thanks dude, that was a fast update!
I wonder if it is possible to add some more freq. between the range of 384 and 528 for the next udpate, e.g. like 500 or 480 for the non 1.5 cupcake build.

smagicmans said:
thanks dude, that was a fast update!
I wonder if it is possible to add some more freq. between the range of 384 and 528 for the next udpate, e.g. like 500 or 480 for the non 1.5 cupcake build.
Click to expand...
Click to collapse
The CPU won't set to anything else, unfortunately (if you set it to 500 for example nothing actually happens).

Sweet.. looking for something like this.

Works great
Faster Open Home load and no longer lags as much.
THANKS!!

Great app !!
Simple and efficient, the best cloacking app for Haykuro IMO. Just a question : how to keep the cpu running at 528 after reboot?
I know this may not be included in your app right now but I think with a script it might be possible. Any idea?
Thibaud

Thibale said:
Great app !!
Simple and efficient, the best cloacking app for Haykuro IMO. Just a question : how to keep the cpu running at 528 after reboot?
I know this may not be included in your app right now but I think with a script it might be possible. Any idea?
Thibaud
Click to expand...
Click to collapse
I'm kind of reluctant to add that feature because if someone's processor can't handle 528MHz I'm afraid peoples' phones will crash every time they start up forcing a wipe.

It has issues with Shake Awake app, everytime single time all day long shake awake forces close when I use SetCPU. Im I the only one with this issue?

Lakers3408 said:
It has issues with Shake Awake app, everytime single time all day long shake awake forces close when I use SetCPU. Im I the only one with this issue?
Click to expand...
Click to collapse
Do you have the lock feature "on?" SetCPU will query a file to see if the phone is awake if lock is on.

lol, i actually havent had any issues with the phone locking up at 528Mhz, and im using 1.5. However, I hate taking out the battery cover ( i manage to kill my phone in other ways) so something else to do woulld just be
-adb shell
-reboot

Voltage concerns
I've noticed that when using the 528 MHz setting, my phone freezes quite often, but only when the phone is not charging. When the phone is charging, freezing never occurs. This probably means that the voltage going to the CPU is probably inadequate to power the CPU at that frequency.

No freezing at all for me! Maybe some CPU are more tolerant to O/C than some others. That would explain why HTC/Google currently block the G1 to 384 Mhz max.

I installed Haykuro 5.0.2Hr3 and SetCPU works perfectly fine now. It would not work on my JF 1.42 RC33 build as I mentioned in the other thread for the overclock app. Im wondering if the Power Manger app could of been causing something or if simply 1.5 is better able to handle it. Don't know, I have had 0 freezes with the current setup though. Retro defense runs much better now when I have many towers setup and enemies attacking (on default clock it gets really laggy when the towers are firing) Thanks for the app cool!

SetCPU for Root Users has been updated to 1.1.6.
Reminder: *SetCPU supports all rooted 1.5 builds, including JF, Haykuro G/H, the Dude's, etc.
Pressing the "Menu" button allows you to read the introduction message again and choose your version of Android.
1.5 features only: Various bugfixes and enhancements. Added a green colored maximum/minimum reading to the top.
Android 1.1/1.0 support has been kept, but this feature will no longer be supported because the 1.5 Android OS is already very widespread. Please update to 1.5 as the overclocking is much more stable!

I just made a very quick hotfix to a bug that I found through the app's own max/min readings.
1.1.6a: Fixed a minor bug when some CPU settings required two presses to "Set Frequency" to set.

Hey I was wondering if there's a way to confirm that the phone's processor is actually stepping down to 128mhz. I have the processor set to max at 528 which is great and then step down to min 128 to save battery power. The phone's been idle for only a few hours and I've lost 30% battery. That makes me think the phone's not stepping down.
Pardon the n00b question, but what's the point of 19mhz? Is there any phone that can step down that low? Mine certainly couldn't.
Great app though! Thanks for you hard work.

There was some discussion about the additional energy consumption of the mode switching when the frequency step is too great. Also, idling your CPU too low will result in it stepping up more frequently when demand increases. Basically, if you set the minimum to 384 and max to 528, it may use less battery than setting the lower frequency as low as you have.

ah that's interesting. Another thing that makes me think the phone isn't stepping down is that the "Current Frequency" reading on the setcup screen never changes from maximum.
Does the processor only step down when the screen goes blank?

Could more frequency options besides max at 528 be added? A 428, 458 and 488 would be nice to have extra zip but stay away from the higher clock for battery and stability reasons (if stability is an issue for some).
Thanks

rushless said:
Could more frequency options besides max at 528 be added? A 428, 458 and 488 would be nice to have extra zip but stay away from the higher clock for battery and stability reasons (if stability is an issue for some).
Thanks
Click to expand...
Click to collapse
Only certain clock speeds are actually possible. The ones listed in the program are tested by me to working.
The point of 19.2MHz is to make that speed available. I don't think the phone will ever step down that low (the idle CPU load is more than enough to make it step up 19.MHz) but you can force 19.2MHz by setting both maximum and minimum to it. Be careful though, it's REALLY slow and you might think your phone is frozen.
ah that's interesting. Another thing that makes me think the phone isn't stepping down is that the "Current Frequency" reading on the setcup screen never changes from maximum.
Click to expand...
Click to collapse
Press "refresh" a few times and it might go down (it does for me when set to 528/384). Remember that simply refreshing the speed causes CPU load and might make the phone change the frequency before it is read. Same with reading the CPU Info dump.

[ROM][ICS][06/26] ICS StuNNeR - 1.6.26

Click Here for More Screenshots​
Featuring:
Click to expand...
Click to collapse
Latest PLAY apps. Working without any issues.
AOKP Features. Look below for the Euphoria Control in screenshots.
Device Settings. Tweaking data connection, screen color tuning, touch keys, and more.
Supernote for Tablet Mode & FreeNote for PhoneUI mode. Best S-Note replacements!
TabletUI and PhoneUI can be switched with one reboot.
MultiTasking Mode and Gaming Mode available for RAM Tweaking
Increased HEAP Size. Enjoy your large apps.
Ad-free browsing and applications you install.
Known Minor Issues:
Click to expand...
Click to collapse
None as for yet.
Visual changes like wallpaper, pre-set homescreen not done.
For other minor bugs, please read forum posts. I bet you won't find many.
Please DO NOT report bug if...
You haven't performed CLEAN INSTALL steps below atleast once before coming to any ICS ROM.
You haven't wipe data before flashing this ROM.
You are using MOD/Theme other than specified in the OP.
You aren't using latest version.
You haven't cleared market data after and before switching DPIs.
Install Instructions:
Click to expand...
Click to collapse
PLEASE READ CAUTION BELOW
It is highly recommended to back up your EFS Partition. You can use this backup in case you lose baseband or get corrupt IMEI.
Click HERE to proceed to EFS Backup.
NEW STEPS 1.6.26 ONWARDS:
If you are on version below 1.6.26, flash GB ROM.
Format DATA / Factory reset if you are on GB ROM or any other ICS ROM.
Flash latest Stunner
Check this video if you unsure about installation. This video starts with rooted GB ROM.
DO NOT FLASH LATEST STUNNER DIRECTLY OVER VERSION BELOW 1.6.26 !!
Disclaimer:
Click to expand...
Click to collapse
Code:
#include <std/disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these directions.
* YOU are choosing to make these modificiations, and if you point your finger at
* me for messing up your device, I will laugh at you.
*/
This is an AOSP ROM and not based on Samsung Touchwiz. So you won't find S-Pen apps like S-Memo and features like S-Pen screenshot. No Kies as well.
However, we have provided replacement apps to make use of S-Pen. This app is in no-way similar to S-Memo and all rights reserved with third-party apps author.
STOP ASKING THIS OR ASKING ABOUT ADDING THIS FEATURE OR ELSE YOU WILL BE CONSIDERED AS MENTAL RETARD.
AOSP refers to Android Open Source Project and we build from the code what's available as open source.
This ROM is only for AOSP lovers. Read FAQ before asking anything. Keep discussions healthy.
Download Link:
Click to expand...
Click to collapse
DOWNLOAD 1.6.26 HERE
If you are posting this ROM any where else please maintain credits, and donate links.​
Caution:
Click to expand...
Click to collapse
Rebooting first time if boot animation stops, long press power key and reboot again.
This is to be done until successfully reboots without freezing at boot screen.
This won't happen on rebooting device later.
The internal SD is mounted @ /mnt/sdcardand the external SD is mounted @ /mnt/emmc
Donate Links:
Click to expand...
Click to collapse
NeoBuddy89
NGiordano
Team Kang
Donations are always cherished for time we spent to develop/build (not just a port) and bring you best.
Credits:
Click to expand...
Click to collapse
Imilka for first AOSP and inspiration.
Team Passion
Team Kang and Romanbb
Cyanogenmod9
All involved in fixing issues for NOTE.
R3b0rn for ICS True Root Method.
You are always welcome to post fixes, review ROM.
Last but not least, you are responsible for flashing this ROM and if anything happens to your device.
​

Code:
[B][SIZE="5"]Changelog:[/SIZE][/B]
[B]1.6.26:[/B]
_CyanogenMod Kernel
_CyanogenMod Device Tree for N7000
_AOKP Merges upto Build 40
_Nelson's Chimera Build (Please donate him - Team Passion Member)
_Theme Support!! Use CM9 Themes now!
_added hardware info in Settings > About
_fixed DRM issues (including Hulu)
_made lockscreen weather much prettier
_fixed tablets
_added Achromatic theme
_fixed added custom WiFi SSID FC
_added ability to change host name (settings > dev > device hostname)
_added ad-hoc network support
_added adb over network
_added bluewall firewall - RC > General UI > Less Notification Sounds
_limits the number of notification sounds an app can play per X seconds
_so like 1 GTalk ping/30s, but notifications will still be coming in
_added "Device options" link in Settings for devices that have an app to tweak device-specific settings
_improved weather code, shouldn't bother you everytime it updates weather now
_added "copy to clipboard" option in "Share" dialogs throughout ANdroid
_added ability to toggle to "new" and "original" music controls on the lockscreen
_reverted tablet nav bar button padding change (back to stock ics padding now)
_fix SMS/BT crash bug when no msgs exist
_reworked lockscreen music layout to be cleaner
_fix ugly gradient on dark holo background
_added statusbar autohide for tablets (for apps that need full screen)
_added support for more lockscreen targets (2-8 options, your choice)
_cleaned up octo lockscreen layout
_fixed certain FCs with RC related to weather
_Mms: fixed stripping certain Polish characters
_decreased size of custom lockscreen apps to match other icons
_statusbar brightness enabled by default after you wipe (sliding thumb across statusbar to change brightness)
_added statusbar notification counter (RC > Statusbar General > Notification Counter)
_Out of range Bluetooth devices won't show up anymore in Settings
_Browser: added option to close all other tabs (besides current)
_Fixed data toggle
_Removed requirement to reboot when toggling keyboard switcher (IME switcher) in statusbar
_added nav bar widgets (to enable, go to nav bar settings > add toggle widgets as one of your nav bar actions/ long press actions, then _add widgets -- be sure to add at least 2 for best experience)
_as always, tons of fixes for devices and other backend fixes!
_fixed navbar glow resetting on reboot
_fixed hide navbar for tablets
_fixed back button disappearing on tablets
_auto-brightness fixes
_added volume adjust sound preference (Settings > Sound > Volume adjust sound)
_fixed memory leak with lockscreen code
_fixed auto-rotate toggle
_systemui will now restart on changing themes to avoid any potential errors
_navbar background is now set through XML to allow theming
_added aokp clock widgets
_reverted sd/emmc switch for Galaxy S devices
_fixed otter build
_navigation bar app icons now scale better
_fixed bug in native Email app that would cause wakelocks
_Support GSM AT commands for SMS over bluetooth
_added more padding to statusbar buttons
_updated Mms emoji code from CM
_wifi icon cut off has been fixed on tablets
_fixed volume slider showing incorrect volume in a voice call (making it look like it wasn't full)
[B]1.4.26.1:[/B]
_Corrected mount points in kernel: Camera pics saved on internal
_Minor fixes in kernel
_NTFS module for testing (may not work)
[B]1.4.26:[/B]
_Fixed Bootloop issue (Removed EXT4 Tweaks for now)
_Fixed ICS Long Press Home Key in Phone Mode
_Mount Points reverted back to original
_Re-stabilized
_Updated Google Maps
[B]1.4.25:[/B]
_Fixed root issues. Everyone should get proper root coming from any ROM.
_LP6 Rooted & Modded Kernel (on test; soon to be replaced with open source kernel)
_EXT4 Tweaks applied on second boot (long press power key if you get stuck)
_External SD card mount point is now /mnt/sdcard (following CM9 standards)
_Internal SD card mount point is now /mnt/emmc (following CM9 standards) Your titanium Backup location may need to be changed.
_Superuser app is back with Root Browser.
_X-plore removed. Can be installed from market though.
_GPS should be better. Don't expect to be perfect yet.
_Recording format set to "MP4".
_Updated Google apps and other apps.
_Fixed mobile data toggle not updating for serious
_Fixed navigation buttons for tablets
_Long press home options added to General Interface for phones that have hardware buttons
_Fixed icon transparency being applied to right-side buttons (BT, etc)
_Add BT MAP Profile
_Fixed font sizing in statusbar
_Fixed volume sliders not updating when volumes are linked
_Many fixes for ColorPicker in ROM Control
__gradient showing properly
__color picker should fit in all screens now
__show color preview before opening dialog (in-line)
_Fixed sound playing when volume zoom is enabled in camera
_last.fm AVRCP crash fixed
_Contact pictures now displaying properly in notifications when receiving new sms
_Bluetooth: Fixed memory leak and file handles leak
_Nav bar & tablet status bar FCs fixed
_Fixed some init.d scripts not running due to lack of bash
_Changing brightness by sliding on the top of the statusbar (if enabled) shouldn’t FC anymore
_ROM Control: Fixed scrolling cache not setting properly
_Weather will refresh whenever SystemUI starts instead of when the phone boots (so if it gets restarted, it should fetch weather again, it didn’t before)
_Lockscrens: Added lockscreen wallpapers to pin & pattern unlock screens
_Settings: fixed link mute states always being checked
_Added bluetooth headset config
_Other fixes of AOKP build 33 which where not included.
[B]1.4.19:[/B]
_Beta Testing Completed!
_Complete AOKP compiled (no separate patches from CM9)
_Added missing fonts
_Services.jar patched for OOM Tweaking
_DSP Manager removed
_Updated Apps: Google Maps, Xplore and Videos
_Camera: Pinch and Volume Zoom
_General UI: Customizable rotation delay is back!
_Bluetooth: AVRCP 1.3+ support
_Lockscreen/NavBar: Allow shortcuts to specify their own icons
_NavBar: Allow tablets to use “hide NavBar” feature
_NavBar: Custom NavBar is now available for tablets as well!
_NavBar: Customizable glow color (New Feature)
_Quiet Hours: Configure the hours your device should be quiet and/or still
_Statusbar: Added ability to WeatherPanel to start a custom app
_Statusbar: Added ability to hide signal bars
_Statusbar: Customizable font size
_Statusbar: Customizable icon transparency
_Added German translation for weather
_Fix CRT Off Animation
_Fix embedded flash on websites
_Fix compass
_Fix disabling Camera Sounds
_Fix NavBar showing up in landscape lockscreen
_Fix long-press resetting custom NavBar icons
_Fix incorrect bluetooth address on some devices
_Fix lockscreen events showing up 1 day before
_Fix quickunlock not allowing passwords longer than 8 chars
_Fix centered clock not showing the correct time
_Fix camera internal issues
_Other small fixes
[B]Beta 5.0 (14/4/2012):[/B]
_Android 4.0.4 - Complete New Build
_Big Big Update, Wipe Wipe Data!!
_Market purchase fixed
_Changing Lockscreen Wallpaper fixed
_Navigation bar overhaul (ability to set custom actions/icons and long-press actions)
_DSP Manager re-implemented (on test - please review this if you use this)
_Other AOKP Fixes - Complete sync upto build 31
_All scripts revised.
_Media scanner and media server related scripts removed as it's fixed internally.
_Updated apps. Modded market replaced with original one (to ensure proper purchase)
_Framework Fixes
_Dalvik Fixes
_Media Server Fixes
_Gallery FC Fixes
_Service Manager Fixes
_Embedded Flash Player Fixes (Not completely tested)
[B]Beta 4.5 (11/4/2012):[/B]
_Reverted system apps to 4.0.3. Fixed FCs.
[B]Beta 4.4 (10/4/2012):[/B]
_Integrated 95% of system apps from 4.0.4 (Framework base is still 4.0.3)
_Services.jar patched to improve OOM. (Better RAM management and kill lag)
_Kernel Tweaks. Default Governor - Ondemand.
_CPU Tweaks. Both cores set online on each boot.
_I/O Scheduling set to "Deadline".
_Application boost tweaks - Faster zipaligning on every boot and optimizing database.
_EXT4 Tweaks re-added (were removed in 4.3) to boost I/O.
_GMail and Play Store updated.
_Euphoria Control updated to integrate viewing calendar events on lockscreen. Changing LS wallpaper still FCs.
_Device Settings separated from Euphoria Control and available directly in system settings app.
_Root-browser removed as not compatible with SuperSU. Use Xplore from Market instead.
_Overall smoothness and response greatly increased. Blazing fast and rock stable.
_STK (Sim Toolkit) implemented and added.
_Torch app & File manager app added.
_OTG Support testing. Check /mnt/usbdisk.
_Launcher FC on reboot fixed. Latest Apex launcher.
_Launcher with increased heap size and zero lag. These tweaked settings will vanish if you update launcher.
_Modem Auto-Install Removed.
_New updater-script. Thanks to [I]antiochasylum[/I] for graphics.
[B]Beta 4.3 (3/4/2012):[/B]
_LP5 Kernel Auto-Install - 1.4 GHz Dual Core Activated
_LP5 Modem Auto-Install
_Market Fixed for missing apps
_Camera Fixes for LP5 Kernel
_LP5 RIL Library added
_WiFi Fixes
[B]Beta 4.2 (1/4/2012):[/B]
_Camera Recording Fixed.
_Added SuperNote for Tablet Mode and FreeNote for PhoneUI Mode.
_Audio Fixes.
_DSP manager removed due to some instability.
_First boot freeze at boot animation fixed.
_Market fixes.
_Minor media enhancements.
_[COLOR="Red"]This is not a new build rather fixes over previous build.[/COLOR]
[B]Beta 4.1 (29/3/2012):[/B]
_Added missing toggles: Data, 2G/3G, Tethering.
_Added missing fonts.
_Zip-aligned all apps.
[B]Beta 4 (29/3/2012):[/B]
_Complete new build with new device tree.
_Lot's of source work & fixes.
_Complete native USB Mass Storage. Removed UMS app developed by us.
_New RIL base from I220 ICS Leak. Before this we were using SGS2 RIL base.
_Storage option in settings don't FC.
_New options to explore in Euphoria Control (EC).
_Synced with AOKP-28
_DSP Manager added and working.
_Hardware keys backlight on by default. To turn it off use Device Settings in EC.
_Greatly increased I/O and thus quadrant if at all it matters.
_Updated few apps.
_Market fixes. No more error while installing app from market.
[B]Beta 3 (20/3/2012):[/B]
_USB Mass Storage using our app. Both external and internal mount!
_Nova Launcher replaced with Apex Launcher.
_Maps and Youtube added. Working.
_[strike]+ Titanium Backup works.[/strike] Still have minor issue with some.
_Some minor tweaks
[B]Beta 2 (18/3/2012):[/B]
_Proper ROOT and installation steps.
_All options of Euphoria Control works.
_Market Fixed.
[B]Beta 1 (18/3/2012):[/B]
Initial Release
Code:
[B][SIZE="5"]Stunner Mods/Themes:[/SIZE][/B]
_[URL="http://forum.xda-developers.com/showthread.php?t=1607038"]Various Transitions by tremerone[/URL]
_[URL="http://forum.xda-developers.com/showthread.php?t=1571347"]Recent Apps Mod by Matius444[/URL]
_[URL="http://forum.xda-developers.com/showthread.php?t=1546380"]Themes by m3dd0g[/URL]
[B][SIZE="5"]Useful Links:[/SIZE][/B]
_[URL="http://forum.xda-developers.com/showpost.php?p=25117410&postcount=5753"]ICS LP1 Direct Link[/URL]
_[URL="http://forum.xda-developers.com/showpost.php?p=24204609&postcount=759"]ICS LP1 Repack and TriangleAway[/URL]
_[URL="http://forum.xda-developers.com/showpost.php?p=24928440&postcount=4250"]ICS Modems LP5 and LP6[/URL]
_[URL="http://forum.xda-developers.com/showpost.php?p=25052556&postcount=5186"]Apps for Tablet Mode[/URL]
[B][SIZE="5"]Fixes:[/SIZE][/B]
_[URL="http://forum.xda-developers.com/showpost.php?p=25045431&postcount=5082"]SystemUI Crash Fix in Tablet Mode[/URL]
_[URL="http://forum.xda-developers.com/showpost.php?p=24860868&postcount=3865"]160 dpi Phone apk crash[/URL]
_[URL="http://forum.xda-developers.com/showpost.php?p=25031613&postcount=4796"]Random Reboots[/URL]
_[URL="http://forum.xda-developers.com/showpost.php?p=23889483&postcount=231"]Sleep of Death[/URL]
Code:
[B]Tip #1:[/B] [U]Switch between Tablet/PhoneUI, the easy way..[/U]
o get tablet mode on ICS Stunner, please follow this steps:
Settings > Euphoria Control > General UI > Switch Tablet/PhoneUI > Custom > 200 (Tablet) > Reboot.
After Reboot, go to Apex Launcher Settings and set grid size to 6x6 or 6x5 to enjoy full screen accommodation of icons.
If you still don't get Tablet Mode, that means your device isn't rooted properly and you need to clean install this ROM.
It is important to follow the steps mentioned there carefully.
[B]Tip #2:[/B] [U]Getting vibrant colors on screen.. the awesome AMOLED[/U]
Settings > Galaxy Note Settings > Screen Tab > Mode > DYNAMIC
This setting would give you stunning vibrant colors. Try it.

Forgive my delays in updating the list, will be updated soon.
Gratitude List:
Click to expand...
Click to collapse
_Maestro Marc
_saniko (Sandeep)
_antiochasylum (Justin) for second donation !!
_mikeemoz (Michael)
_afilopou (Anargyros) for second donation!!
_smoothface(Shaun)
_davidfrog (David)
_JoyR2 (Ryan)
_r3dcruz (Rick) for third donation!!
_Evaravenspell (Sarah)
_thechints (Chintu)
_DeKubus (Lukas)for second donation !!
_chasmodo (Bosko)
_Vasareth (Yannick)
_torseni5t (Mark)
_pvillasuso (Pablo)
_eternauta1949 (Nunzio)
_zylor (Ana)
_s204 (Ridzuan)
_encima (Encima)
_Octavian90 (Hung)
_dude_uuk (Jerome)
_Ashraf628 (Ashraf)
_kikouyou (Eric)
_rajuki (Rajeev)
Kindly mention xda nick and ROM name while donating. Please pm me if anything related to Gratitude list. Thank you for your donation.
F.A.Q.
Updated 3rd July.
Click to expand...
Click to collapse
Would I able to revert back to GB ROM ?
Yes. We don't mess with bootloader.
What are the changes of the latest beta ?
Read changelog post.
Can you add <feature> ?
No.
Can I have S-Pen functionality ported ?
No. This is an AOSP ROM and not based on Samsung's Touchwiz ROM. However S-Pen works.
Does BLN works ?
No.
Sometimes my phone goes to death (won't turn on), any fix ?
Try switching modem.
Camera recording doesn't work ?
YES, it works.

................................................

good luck man!
Sent from my GT-N7000 using XDA

Is camera workin and video play back? Thank you for your work. Welcom to Note devrlopment.

WOW,
Great to see another ICS ROM,
Hope you name it difference than beta1,2,3 ...

Rigby2011 said:
Is camera workin and video play back? Thank you for your work. Welcom to Note devrlopment.
Click to expand...
Click to collapse
yes camera working.

count me for beta tester of yours ICS STUNNER ROM..

I will test this rom asap, when phoneUi will be uploaded.
Is this rom using CM9 bluetooth stack ? Because no one rom support wiimote, I hope yours support wiimote controler

wow...sreenshot
Sent from my GT-N7000 using Tapatalk

Is video camera working and saving videos? Cuz thats like the biggest issue for me on all the other roms.

I read the first post, but wasn't sure on one point regarding the phone/tablet versions. Does this mean that the tablet ui version only has the tablet ui on it? Meaning I could not manually edit build.prop and change dpi to kick it into phone.

Progamersparsh said:
Is video camera working and saving videos? Cuz thats like the biggest issue for me on all the other roms.
Click to expand...
Click to collapse
Not working. Thanks for reporting.
Added to bugs list.

Smoothface said:
I read the first post, but wasn't sure on one point regarding the phone/tablet versions. Does this mean that the tablet ui version only has the tablet ui on it? Meaning I could not manually edit build.prop and change dpi to kick it into phone.
Click to expand...
Click to collapse
Kernel limitation won't allow you to change manually.

neobuddy89 said:
Not working. Thanks for reporting.
Added to bugs list.
Click to expand...
Click to collapse
Damn, we need sourses.

neobuddy89 said:
Kernel limitation won't allow you to change manually.
Click to expand...
Click to collapse
You can change DPI just by editing the /system/build.prop with Root Explorer
It works on every rom (aosp aokp miui...) so this should work here too

Great too see yet another nice build. Will see if I can get some time to spin it.
| GalaxyNote ICS | Tapatalk |

is HDMI out working on this ROM?
Sent from my Galaxy Nexus using xda premium

clubtech said:
is HDMI out working on this ROM?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
It should not be, because it is built upon the existing ics from imilika, which does not have working usb host/hdmi out (correct me if I got that wrong).
I don't think it works on any of the ics roms atm until we get a better leak or a true release.

[ICS] AAAwwwesome usability increasing settings

i've figured out the best settings without the supercharger. supercharger may allow multitasking but it makes the system crawl, barely any apps go to cache, app launches are slow etc, AND IT EATS BATTERY LIKE A CANNIBAL on it-self on the ICS beta roms.
what i have done to get incredibly smooth operation is by that i have changed a few and added a few more lines to my build.prop
1) change/add the dalvik.vm.heapsize to 96m from 64m (for lesser multitaskig but smoother apps - i get two apps to multitask with this) or reduce to 48m for more multitasking (i am getting 3 apps multitasking with this 2do, officesuite N email).
2) add MAX_HIDDEN_APPS=1 and MAX_ACTIVITIES=6 (this seems to prevent multiple apps for trying to access the memory and the cpu power at the same time, giving you a better experience, i haven't had any problems with notifications for my facebook, email, pulse n whatsapp)
3) delete the 99supercharger* script from your system/etc/init.d folder
4) i am using the supercharger's bulletproof apps thing for my phone, aNag, phone dialer (option 17) get the ICS services.jar from http://forum.xda-developers.com/show....php?t=1533044 (apparantly its needed to make ICS understand OOM adjustments.
5) go to cwm to clear the dalvik cache or just do superclean-restart with the supercharger script (option 30)
btw, you have to use the DoomLoRD's advanced stock kernel with the stock wifi modules - the doomkernel v4 is superbuggy and unstable. the stock kernel itself doesnt have init.d support for the bulletproofing so you'll need the advanced stock kernel
UPDATE : 5.5) force GPU rendering under developer options in settings.
UPDATE : 6) also add 3 more things via rom toolbox's kernel tweaks for faster launches : vfs_cache_pressure=10 dirty_background_ratio=60 dirty_ratio=95 (i got this from kickasskernelizer) n make em load on reboot. also in kernel tweaks under advanced change up threshold to 75 (higher battery but slower initiations) or 30 (super fast scaling, but lower battery) sampling rate to 200000, powersave bias to 30 (make this 0 for supersmooth, or 60 for more battery life) and i/o scheduler to noop.
UPDATE 7) if you want better multitasking (albeit lesser smooth) apply the superharger OOM+bulletproof launcher settings N lower the screen updates (**** i forgot its name) thing from 200 to 120 (supercharger changes it to 200, which causes lags n a hyper accelerated scrolling)
(I had posted this under JJ's rom, but since its applicable to all ICS beta based roms (out of which i find jj's rom to be the leanest n the meanest) I am posting this here to see what others say about it. also, try his Fold Animations w/buttons (if you like buttons, albeit with a smaller screen area) or my favorite Twister animations.
p.s. devs, please suggest other pros n cons of doing the above.
please press thanks if you like this

I'll try this too.
Thanks

Thanks for the info this weekend I test these things if I can. Looks nice

[NAND] N00bDroid (1.1) (Based on CRII CM7.2) [28 OCT 2012]

After following the progress made here, I decided to make my own modded ROM.
The name was chosen because I'm a total newbie in modding and I don't expect it to be very good, but well enough at least for me.
I DON'T TAKE ANY RESPONSABILITY FOR ANY PROBLEM WITH YOUR DEVICE(S)!
ABOUT:
- Based on CoolrunnerII's CM7.2
- LauncherPro (Because Nemus started to lag)
- Increased Heap Memory size to stop Market and Wallpaper problem (now the Market can be updated)
- Replaced Music with Winamp (Beta, but stable version of Winamp to be as light as possible)
- I "borrowed" Kuskro's ideas (like quicksettings and RealCalc)
- I included Rotation Locker (to change from portrait to landscape)
- I included some lines in build.prop which improve 3G and changing to wi-fi and wi-fi connecting speed
- I gave up on CPUTuner because it caused too much lag for the small ammount of saved battery
- Bootanimation changed.. Thanks to SDogo for the X1 Bootanimation.zip
N00bDroid 1.1 Download
N00bDroid (first release) Download
HOW TO:
- Format in CWM Recovery partitions /system, /data, /cache
- Install ROM - Detailed instructions HERE
- Boot into ROM
- Once booted, make sure it won't go in standby until after next step
- Go in Settings>CyanogenMod settings>Display and deactivate everything except 0 degrees
- Go in Settings>CyanogenMod settings>Performance and check Use 16bit Transparency
- Go in Settings>CyanogenMod settings>Performance>CPU Settings>Max CPU Frequency and set any freq between 528 and 576 MHz
- Reboot in recovery
- Install the GAPPS
- Reboot
- Have fun
I will put here a list of tweaks when I will have more time
Thanks: Sp3dev, Zargloub, CoolRunnerII, Jerrytan93, Kuskro, Elibl and BrianXP7 for contributing at this project

Working:
Mainly:
-Mobile data (Voice/3G Edge/HSDPA) - Improved HSDPA to wi-fi change speed
-Wi-fi (currently it works only with WPA)
-Bluetooth (as CoolrunnerII says, if you deactivate bluetooth, the battery will drain very fast, so after using bluetooth, deactivate then reboot)
-GPS (I haven't test yet, but it should work)
-Camera - Without Auto-focus
Secondary
-Flash LED
-Coloured LEDs
-Battery life about 18 hours (with 30-40 minutes music - that took a bit - , 10-20 minutes wi-fi, 5-10 minutes voice call and some messages)
-Market can be updated
____________________________________________________________________________________________________________________
Not working/problems
- battery still drains too fast (in standby it's about 25 times more power consuming by coolrunnerII's measurements)
- Wi-fi WEP is not working
- Battery meter goes to <20% after reboot. However, it will not influence overall battery life
- Camera is not focusing
- FM Radio
- HQ videos
- Front camera
___________________________________________________________________________________________________________________
TWEAKS:
- You can use SetCPU (thread - here) to enable better control of CPU as it goes (also on project's google page):
Stability
Minimum (MHz): 19.2
Maximum (MHz): 528
Governor: ondemand
Performance
Minimum (MHz): 128
Maximum (MHz): 614.4
Governor: performance
If you have the possibilities, you can support the developer by buying the app on Google Play
- For a easier use of Rotation Locker go in Settings>CyanogenMod Settings>Input>Long-Press menu settings>Choose behaviour>Custom application then Select custom application>Application>Rotation Locker
- Also for a easier use of Advanced Task Manager go in Settings>CyanogenMod Settings>Input>Long-Press home settings Uncheck "Show Recent apps tile", check "Use custom application", Select custom application>Applications>Advanced task killer free
- You can change the lock screen into a less-laggy one by going in Settings>CyanogenMod Settings>Lockscreen>Lockscreen style>Rotary(it's my favourite)/Sliding tab/Lense
- Go in Auto Mount app and tick "Enable SD Card Auto-Mounting"
______________________________________________________________________________________________________________________
Changelog
28.11.2012 V1.1
- Changed Nemus Launcher to LauncherPro
- Changed QuickPic to Picturen Lite
- Change Maxthon Browser to Boat Browser
- Included Advanced task killer
- Included OI Flashlight
- Included AutoMount
- Edited build.prop to often search for wi-fi (CAUTION - It may drain your battery if you don't turn off wi-fi when not needed)
25.10.2012 V1
- Initial release
________________________________________________________________________________________________________________________
NOTE: I am open-minded to any improvement idea as long at it's still in my understanding limits.

Many thanks to be there with new projects.
Let me tell you that CPU Tuner works properly on ZeamDroid but on CM7.2 doesn't because of CM CPU controller. For CM7.2 the best option is not the CM CPU controller the best choice is SetCPU.
Best.

kuskro said:
Many thanks to be there with new projects.
Let me tell you that CPU Tuner only works properly on CM7.1 but on CM7.2 doesn't. For CM7.2 the best option is not the CM CPU controller the best choice is SetCPU.
Best.
Click to expand...
Click to collapse
True, but SetCPU is a paid app, so even though I can pay it, I'm not allowed to include it in my ROM

ady_95 said:
True, but SetCPU is a paid app, so even though I can pay it, I'm not allowed to include it in my ROM
Click to expand...
Click to collapse
Well, the version 2.24 is free for xda user: http://forum.xda-developers.com/showthread.php?t=505419
.
The reason why CPU tuner doesn't work is because of CM CPU controller. But CPU Tuner is the best frequency switcher for our Xperia X1.

Dear ady_95
Thanks a lot, for your nice work, could you please tell us, what is working and what is not ?!
and what about the battey life?
thnx dude !

V1.1 released (V2 will be released when we will have a major change in the build... Until that, only 1.x.y)

BrianXP7 said:
Just wanted to point out the link is broken and it's October, not September.
Here's the link ady_95 gave me via PM: http://www.fileden.com/files/2012/10/28/3361429/kovsky_signed_102812_191920.zip
Click to expand...
Click to collapse
I edited the name and about the google drive link, it's now fixed...(so please, if you can, remove the link from your post, because I don't know what's the downloads limit - or if there is one) also, the DL speed on Google Drive is bigger

Well, guys, it seems the base ROM and the kernels had not changed in the last weeks so until an update comes I retire and go back to WM because my camera is f**ked up and my X1 is the only replacement, I have to manage a high-school radio (from everywhere) and also I have semestrial tests in the next 2 weeks.
I will still follow the forum and when a major update will come, expect for me
See ya!

Hi, this ROM works great for me, very good performance, but after awhile it's not letting me make any calls. Whenever y try to call someone it just shows in red "Call Ended 0:00".
Wish I could go back to windows mobile as well, as I love using my X1, but I wouldnt use it if i did, as there's no Whatsapp or decent gtalk app on windows mobile.
Anyway, thanks for the ROM, great work.

[DISCONTINUED][LINKS-DEAD][ROM][BETA][T710] Experience 8.1 Rebuilt 2.0 (21/09/2018)

DREAM UX N8/S8 ROM- TAB S2'S LONG AWAITED OVERHAUL[Updated 19 September 2018]
The group includes all variants as I am now beginning to stem out my ROM to other variants.
Hello fellow Tab S2 users. Ever seen a friends S8 or N8 and gotten jealous of their completely overhauled UI, lovely Always On Display (Edge Lighting too now), Smooth Performance in Games and day-to-day usage and their ridiculously loud mono speakers which sound louder than our Tab S2 speakers because Samsung wants to promote their Tab S3. Well no more! This ROM will do all of that and extra! This ROM is a careful combination and port of both Note's and S8's apps and features but ensuring that performance and efficiency is a priority above all else. The main goal of this ROM is to surpass all of the problems mentioned above but not lose out on awesome features i.e AOD.
NOW I know that I said I wouldn't do that many rebuilds for devices I don't own but I can't help it! This took a while to do so hit the thanks and I'll see you on the next one!
WHAT'S INSIDE?:
From The Top:
1. N8 Calculator
2. N8 Calendar
3. S8 Camera UI
4. S8 Clock
5. N8 Contacts
6. S8 Email
7. N8 Galaxy Apps
8. N8 Gallery
9. N8 Game Launcher
10. S8 Internet
11. S9 Messages
12. N8 My Files
13. S8 Dial UI (Phone)
14. Play Games Pre-installed
15. S8 Samsung Connect
16. N8 Samsung Music (No Edge)
17. N8 Samsung Notes
18. S8 Settings
19. Sidesync S2
20. S8 Video Library
21. S8 Voice Recorder
EXTRAS
1. Soundalive Tweaks
2. Fully Functional AOD (Note: Can cause a little more battery drain and also can bug out backlight keys. Extra app installed to unfreeze the buttons when this happens)
3. Build prop tweaks for improved performance
4. Magisk Compatible ( MAGISK PREINSTALLED)
5. Speaker and Headphone Values boosted.
6. Game Tuner Integrated into UI for GPU OC.
7. Kernel Adiutor included for Engine95's new kernel. OC upto 2000mhz for 1 hour for A57 Cores and 1500 mhz for 1 hour too:
Best settings for me ATM:
I/O Scheduler: 2048 R/W and CFQ.
LMK Default ( No change).
Virtual Memory: Swappiness 0 (Slows down if on any higher value. Laptop Mode:1 ZSWAP: Memory Pool: 35% Maximum Compression Ratio: 75%
8. Init.d Script to kill DVFS
9. Debloated a little (The objective is features, but also performance)
THATS ALL FOLKS! Install Instructions:
ITS FLASHABLE!
Wipe data (Optional but Recommended)System, Dalvik Cache and Cache
Then Flash THE ZIP!
V1.1: New Base equals some new stuff
1. Deprecated old thread
2. Complete Rebuild with optimizations for T710
3. Dolby Removed for now as reinstalling it takes a while to do so.
4. Magisk 16.0 updated
1.2:
Keyboard Bug Fixed!
Some mini fixes
1.3:
A tester just confirmed everything is working.
1. Bugs and Acore fixed
This has been one of the most pesky releases on my behalf and for this I am sorry!
---------------------------------------------------------------------------------------------------------------------------
Also You may find some random Note 8 Stuff as i ported a Note 8 Floating feature.xml file but adjusted the battery settings to our Tab S2 configuration. Also PLEASE READ what i wrote below!
Kernel Source: https://github.com/engine95
Enjoy! Special thanks to:
Engine95,Mcfy for development help

Unfortunately I haven't been able to get very far into this ROM, as there doesn't seem to be a keyboard installed, and even selecting the virtual keyboard option in the input settings causes the entire tablet to restart.

MixxxmasterMac said:
Unfortunately I haven't been able to get very far into this ROM, as there doesn't seem to be a keyboard installed, and even selecting the virtual keyboard option in the input settings causes the entire tablet to restart.
Click to expand...
Click to collapse
Same here, even installing a keyboard is out as the necessary binaries aren't in the room causing almost constant fc's
Sent from my SM-T710 using Tapatalk

Out of curiosity, does your script remove the permissions and keep them removed, like in the pic? I'm just wondering because the ramdisk in the kernel is setting permissions for DVFS. If your script runs after boot it should. But if it runs on boot then it probably doesn't stick.

engine95 said:
Out of curiosity, does your script remove the permissions and keep them removed, like in the pic? I'm just wondering because the ramdisk in the kernel is setting permissions for DVFS. If your script runs after boot it should. But if it runs on boot then it probably doesn't stick.
Click to expand...
Click to collapse
It runs after boot so it should be fine.
And a message to everyone else, ROM reuploaded with keyboard fixed!

What is this and how do I stop it. It won't stop popping up every few seconds

legojoe8 said:
What is this and how do I stop it. It won't stop popping up every few seconds
Click to expand...
Click to collapse
Just released one final zip. Hopefully! This will be the last fix ZIP I make for this release...

All issues fixex with t710 build. Tablet runs very smooth, thanks for your time and effort, keep up the good work.

AOD not work properly

Great rom! Thank you so much for you effort! Clean installed it today coming from Roadrunner rom. Samsung Themes can not be installed. I always get a message "download failed"...??

Not work, boot every time on TWRP
PS: I don't rooted the tablet.