Related
So I actually posted a thread detailing how to restore the Streak 7(Wifi only) back to stock. I put it into general in the main forum instead of under the streak 7 forum. So I am placing this here to lead to that post.
http://forum.xda-developers.com/showthread.php?t=1252840
Page not found for me.
Sent from my ADR6400L using Tapatalk
lrs421 said:
Page not found for me.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
Sorry not sure why that was happening. I changed the link. Thanks for letting me know.
AndroidOVERALL said:
Sorry not sure why that was happening. I changed the link. Thanks for letting me know.
Click to expand...
Click to collapse
No, thank you for sharing this guide
Sent from my Dell Streak 7 using Tapatalk
Thank you
Thank you vey much.
I have spent 2 days before finding your topics.
I was as many others : applying the update with CWM on my tablet.
Everything is OK now, i have followed every steps and it worked at the first time, my CWM was removed.
Thank you again to you and all the others contibutors !
Can I use this method to go back to 2.2 after the official 3.2 update?
Sent from my SGH-I777 using XDA App
98tiburonfx said:
Can I use this method to go back to 2.2 after the official 3.2 update?
Sent from my SGH-I777 using XDA App
Click to expand...
Click to collapse
Yes, you can.
when i double click the restore.bat file the command prompt windows starts up and it looks like its running some commands and then disappears. i have successfully installed the drivers and edited the restore file. cant figure it out.
BDR456 said:
when i double click the restore.bat file the command prompt windows starts up and it looks like its running some commands and then disappears. i have successfully installed the drivers and edited the restore file. cant figure it out.
Click to expand...
Click to collapse
If you are running Win 7, try running the .bat file as administrator.
someone help me get my Dell Streak into APX mode?
i tried the both volume buttons and connect to computer method, but neither adb or the computer recognizes it. the computer doesn't even see it i don't think. any ideas?
i'm trying to get this ROM to work because my Dell Streak got borked.. dumb move by me, trying to update using the OTA...
an now it's stuck booting into recovery EVERYTIME. like everytime i try to reboot it, it boots into Clockworkmod Recovery.
any help would be GREATLY appreciated...
saranhai said:
someone help me get my Dell Streak into APX mode?
i tried the both volume buttons and connect to computer method, but neither adb or the computer recognizes it. the computer doesn't even see it i don't think. any ideas?
i'm trying to get this ROM to work because my Dell Streak got borked.. dumb move by me, trying to update using the OTA...
an now it's stuck booting into recovery EVERYTIME. like everytime i try to reboot it, it boots into Clockworkmod Recovery.
any help would be GREATLY appreciated...
Click to expand...
Click to collapse
open up the device manager on your computer and push both volume button and then plug the streak in to the computer. if the list flashes its seeing something.
BDR456 said:
open up the device manager on your computer and push both volume button and then plug the streak in to the computer. if the list flashes its seeing something.
Click to expand...
Click to collapse
ok, so the computer sees it... but when i click update drivers and navigate to where the driver is located, it says "windows was unable to find the drivers"
mine did the same thing. it took me a few tries.
BDR456 said:
mine did the same thing. it took me a few tries.
Click to expand...
Click to collapse
How can I tell if the device is in apx mode? Besides the computer seeing it... Like does the device flash or vibrate or anything?
Sent from my HTC Glacier Sense 3.0 using xda premium
saranhai said:
How can I tell if the device is in apx mode? Besides the computer seeing it... Like does the device flash or vibrate or anything?
Sent from my HTC Glacier Sense 3.0 using xda premium
Click to expand...
Click to collapse
Yes, as said before.........
The screen will remain black and the three capacitive buttons will light up ( back, menu, home )
Sent from my Dell Streak 7 using XDA Premium App
so i used this method on my US 4g model... and it worked with exception of the backspace button ( <- arrow button) not working.. even asked and recognized a simple mobile sim then asked for a network unlock
but i would like to upgrade to HC... and the wifi updates do not come to the 4G models...
so im going to try install CWM from market and try the "Official-HC-Stage1" and "Official-HC-Stage2" zips and see how this works out
well, the install seems fine so far.. just experiencing the crashing of the android.process.acore issue
Hi there
multiupload is down. Could someone PLZ post the wifi only files as i have (wasn't even drunk!) flashed t-mobile version and am now very pissed
Hi everybody,
I need your helps.
My Dell Streak 7" is now always "force close" everything after using about 5-10 min. Then I need shutdown and restart, it formatted factory, all my settings, softwares be lost. It's running android 2.2.
I try to update with hoping it will be repaired, but mission impossible.
I think DS7's ROM has errors.
Pls help me how to repair my DS7. How to setup a stock ROM on it?
Thank you very much.
Sorry about my bad English level.
heroofyouy2k said:
Hi everybody,
I need your helps.
My Dell Streak 7" is now always "force close" everything after using about 5-10 min. Then I need shutdown and restart, it formatted factory, all my settings, softwares be lost. It's running android 2.2.
I try to update with hoping it will be repaired, but mission impossible.
I think DS7's ROM has errors.
Pls help me how to repair my DS7. How to setup a stock ROM on it?
Thank you very much.
Sorry about my bad English level.
Click to expand...
Click to collapse
Follow the direction on this thread to restore your ds7.
http://forum.xda-developers.com/showthread.php?t=1252840
otnos said:
Follow the direction on this thread to restore your ds7.
http://forum.xda-developers.com/showthread.php?t=1252840
Click to expand...
Click to collapse
My DS7 is T-mobile 3G version. Which stock ROM is good?
There is only one stock ROM, you use the one with the NVFlash method
cdzo72 said:
There is only one stock ROM, you use the one with the NVFlash method
Click to expand...
Click to collapse
I wouldn't listen that thread has many warnings about only being for the Wi-Fi version only.
Sent from my Dell Streak 7 using XDA App
Smurphjw said:
I wouldn't listen that thread has many warnings about only being for the Wi-Fi version only.
Sent from my Dell Streak 7 using XDA App
Click to expand...
Click to collapse
For you dumbasses too lazy or too ignorant to use the search function ans SEE that there is an entirely different thread for the 4G version here is the link...
http://forum.xda-developers.com/showthread.php?t=1018809
Why link yo the wifi version in the first place?.....either way this is a nand issue. It needs to be serviced by dell.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Smurphjw said:
Why link yo the wifi version in the first place?.....either way this is a nand issue. It needs to be serviced by dell.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Click to expand...
Click to collapse
IIIIIIIIIIII DID NOT like to the wifi fix thread, it was otnos's post that linked to the thread... learn how to read the entire thread.
On another note, @heroofyouy2k, IF the NVFlash fix does NOT revive your Streak 7, then Smurphjw is correct, only DELL can fix an Streak that has gotten stuck in Read-Only mode, which is what happened to yours, AFTER you reset from within Android, which is the detail you have probably failed to mention on purpose trolling for a possible fix to your user error
I stand corrected.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Smurphjw said:
Why link yo the wifi version in the first place?.....either way this is a nand issue. It needs to be serviced by dell.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Click to expand...
Click to collapse
cdzo72 said:
IIIIIIIIIIII DID NOT like to the wifi fix thread, it was otnos's post that linked to the thread... learn how to read the entire thread.
On another note, @heroofyouy2k, IF the NVFlash fix does NOT revive your Streak 7, then Smurphjw is correct, only DELL can fix an Streak that has gotten stuck in Read-Only mode, which is what happened to yours, AFTER you reset from within Android, which is the detail you have probably failed to mention on purpose trolling for a possible fix to your user error
Click to expand...
Click to collapse
Thanks for your replies.
Yesterday, I tried to update my DS7 with a file follow link mobileupdate.dell.com/?version=GLUNB1A132233&servicetag=9KBM2P1
But it coudn't fix my DS7.
Now, I will try to restore it.
I'm in Vietnam, so I can't ask for warranty services from Dell
i am experiencing same problem here. any good suggestion?
Try to factory reset. If your device just normally reboots without resetting than dell needs to fix or replace it cuz the system has somehow become read only.
Sent from my Nexus S using XDA Premium App
Smurphjw said:
Try to factory reset. If your device just normally reboots without resetting than dell needs to fix or replace it cuz the system has somehow become read only.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
so before dealing with Dell CS, I want to try the T-mobile restore using NvFlash, you think it should fix the prob or it is just a waste of time?
rome2high said:
so before dealing with Dell CS, I want to try the T-mobile restore using NvFlash, you think it should fix the prob or it is just a waste of time?
Click to expand...
Click to collapse
If your system has gone read only its a waste of time.
Sent from my Nexus S using XDA Premium App
so if its read only mode then only dell can fix it?
that would be correct, as of now no one has been able to come up with a solution
cdzo72 said:
that would be correct, as of now no one has been able to come up with a solution
Click to expand...
Click to collapse
dam that sucks cause i think my tablet is also in read only. i did a soft & hard reset & nothing gets deleted. tried going into safe mode but when i see safe mode i let go but then it goes blank then dell logo shows and it boots into regular. im only able to use it for a couple mins b4 i get all the errors & force to quit. So i was wondering since the tablet only works for a few mins what if the honeycomb up suddenly shows up. will updating fix the issue?
james_larson2001 said:
dam that sucks cause i think my tablet is also in read only. i did a soft & hard reset & nothing gets deleted. tried going into safe mode but when i see safe mode i let go but then it goes blank then dell logo shows and it boots into regular. im only able to use it for a couple mins b4 i get all the errors & force to quit. So i was wondering since the tablet only works for a few mins what if the honeycomb up suddenly shows up. will updating fix the issue?
Click to expand...
Click to collapse
No, your system is locked in read-only meaning anything you do will not save or resolve any issues. Even if you download the HC update you'll install it and once your system reboots nothing will change. You can't do a factory reset, you can't do anything. The system is stuck and as of right now the only way to get it repaired is through Dell CS. There are some guys on the forums getting together to try and see if they can solve the issue, which will be a waiting game if you are out of the country.
I was fortunate enough to come across a T-Mobile DS7 very cheap due to it having this read-only error. I called Dell on 10/4/11 around 2AM spoke with the tech, they said they will send me a box to repair it. Today, 10/5/11 I received the box at 8:30AM packaged up the Streak and put it in a FedEX drop box around 10:30AM, will keep you guys posted on how long the process takes for me to get this thing back.
just wanted to jump in on this topic. I had the same issues, (force close errors, read-only mode, etc..), I sent it back to dell after reading the last post and they had it back to me with-in 3 days. Up and running again. Very pleased with the results. I recommend just sending it back in.
Thanks to dhacker29 for the orginal idea and script!
Check out his orginal post for the Droid Bionic here!
Also, thanks to kennethpenn for providing the files you are about to use!
You have to be unlocked to use this!!
I AM NOT RESPONSIBLE FOR ANY THING THAT HAPPENS TO YOU OR YOUR PHONE!
I will try to help as much as possible, but that does not allow you to hold me responsible for anything whatsoever.
Step 1. Download this zip file and extract it, putting all the files in a folder.
Step 2. Download the file "One-Click Fastboot Restore.zip" and extract it, putting all the files in the same folder as the one above.
Step 3. Run the .bat file and follow the instructions.
DO NOT FIX PDS PARTITION UNLESS NECESSARY! IT WILL WIPE YOUR MAC ADDRESS FOR WIFI AND BLUETOOTH!
(Found some typos, not serious. Will fix soon)
No comments yet? I take that as a good sign, I haven't screwed up the script!
What does this do? Restore a backup from fastboot
Sent from my MB860 using XDA App
I'm also curious what exactly it does. At 140k it isn't replacing very much. Does it just fix files related to booting?
Didnt run it because I'm on linux and my phone is fine, but looking at the batch file, it automates flashing the stock gingerbread rom and restores PDS via fastboot.
when I run it, it gives me AdbWinApi.dll error. any suggestions?
I ran this for ****s and giggles and it returns everything back to stock AT&T 2.3 while giving you options along the way of what exactly you wanna restore to stock? webtop, system,pds, wipe data etc. works perfectly! makes life easier really! Phone booted right up after running no problems! Thanks!
beidave said:
when I run it, it gives me AdbWinApi.dll error. any suggestions?
Click to expand...
Click to collapse
Look for that dll file on Google and put it in the folder
Javi97100 said:
What does this do? Restore a backup from fastboot
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tapeworm_george said:
I'm also curious what exactly it does. At 140k it isn't replacing very much. Does it just fix files related to booting?
Click to expand...
Click to collapse
It restores your phone back to stock AT&T android via fastboot automatically. It also gives you the option to *fix* your pds partition.
It's also an alternative to RSD
Gutterball said:
I ran this for ****s and giggles and it returns everything back to stock AT&T 2.3 while giving you options along the way of what exactly you wanna restore to stock? webtop, system,pds, wipe data etc. works perfectly! makes life easier really! Phone booted right up after running no problems! Thanks!
Click to expand...
Click to collapse
Thanks for your reply, it assures me that the file isn't screwed up!
What happens if i run this on a non-US retail-EU Atrix?
Nevermind.
Sent from my MB860 using XDA App
hkkla said:
What happens if i run this on a non-US retail-EU Atrix?
Click to expand...
Click to collapse
Anyone has a clue? Is this a complete restore to out of the box-state?
sorry if this is a noob question. but dose this revert ext 4 format back to stock? haven't been keeping up lately and this ext 4 ext 3 stuff is new to me.
It restores it back to stock AT&T. EVERYTHING will be restored to stock.
hkkla said:
What happens if i run this on a non-US retail-EU Atrix?
Click to expand...
Click to collapse
It restores it back to stock AT&T. I tried this on an international Atrix.
Pardon my ignorance, i'm trying to restore a bricked Atrix 4G for a friend. It gave error Failed to boot SVF 105:1:2 0x1000 after bad upgrade. Is it possible to use this as a solution? How can i find that out? and in any case, i have downloaded all files, what's the correct procedure to do this?
Thanks in advance.
Anyone?
Sent from my X10i using XDA App
Barzobius said:
Anyone?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
If its already bricked it can't get much worse using this script. Try it.
Sent from my MB860 using Tapatalk
Phalanx7621 said:
If its already bricked it can't get much worse using this script. Try it.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Well, been trying but haven't been able to do anything with it. I mean I never used it before and seems like it needs to boot into fastboot mode which I haven't been able to do.
Is in any way possible to make the phone boot into that via usb cable with this software? I installed all requiered software including drivers but it never detected the phone in that (bricked) state, not even once. The phone turns a green light when u connect the usb without battery in, thats it.
I haven't found any solution yet, only seen ppl saying to buy a new one. Is this brick really that bad that there's absolutely no solution? And it all seems to be caused by lack of SBK as ive read on the net...
Well if there's any good news I would like to hear them
Sent from my X10i using XDA App
It's a hard brick. I'm sorry, but it cannot be fixed. You can always try a factory cable, but so far, nothing can be done. I feel your pain
WOW! HOLY CRAP THIS PLACE IS DEAD! Its been a while since I read around these Zio places. Yup, my ol Zio still bootlooped (its around here somewhere). I tried all the "guides" n zip's and skd's and all that other.....stuff, its koo gathering and installing stuff and gettin that lil rush of hope, but then one lil thing goes wrong or ain't in the step-by-step guied, BOOM- all bad, and nobody's around all of a sudden. Alot of HERE, TRY THIS POST FROM SO N SO (not for the Zio), GO TO BLAHBLAH.COM install that n profit (evil setup to rom someone's phone AND wipe it clean), BUT ITS ALL MY BAD, NEWBIE like me shouldn't mess with roots n roms. Don't get me wrong, if I can find somebody that would fix it for cash, id go back to my zio and chuck this HALLWIE A2 (whatever its called) to a dev. Well, I'm probly gona get smashed for posting this. DEEEEP BREATH........K, I FEEL BETTER NOW.
Now I'm soo broke I cant even pay attention!
What you need help on? Bootloop fix? I can help you. Pm me on the details. Could you still get into faatboot or recovery? What service sprint or cricket!?
Sent from my Zio using XDA App
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Not sure where it is but there was a fast boot zip of launcher apk. If you boot your phone into fast boot and cwm copy the zip to the phone and then flash the zip to your Zio it should resolve the issue
Sent from my Zio
Krsmqn said:
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Click to expand...
Click to collapse
I can make a launcher apk. flashable zip for ya,just let Me know.
Sent from my LG-P509 using xda premium
openZIO Rom issue
Hi, I just installed the openZIO 2.1.2 ROM. Everything worked fine, but after rebooting and going through the initial set up (i.e. the google user setup blahblah) the VTL Launcher continually force closes and I can't do anything but go back and recover my original boot.img has anyone else had this kind of issue? Any possible fixes? Any help would be appreciated, I know not to many people are in using the Zio forums anymore... but yeah.. Thanks in advance
Try Reflashing again
Sent from my LG-P509 using xda premium
I've actually already done that, and it's still doing the same thing. I've deleted and re-downloaded the ROM, and re-flashed it to my phone, and still having the same issue. VTL Launcher just continually force closes, and it sucks cause I've been waiting months to get to install the ROM cause I couldn't afford a new USB cord. I've read so much on this ROM and everything for the Zio and was excited to actually be able to overclock my phone, and get some pretty good performance boosts out of it. Now I got one, and can't get it to work.. what a sad day
Could you explain your steps when flashing?
Sent from my LG-P509 using xda premium
well I first move the .zip to the sd, then power down and boot up CWM, and "install from SD card" and once it's finished flashing, I reboot the phone. when it comes back up my kyocera logo comes back up and it takes me through the first-boot programming (google sign-in) and once I input my un/pw and sign in, it tells me that VTL had an error and must hit force close. and once I hit force close it continues to come up saying the same thing over and over again. so I rebooted my phone, still the same thing. SO I go back through and flash it back to my original boot.img. I have gone through and completely deleted the openZIO 2.1.2.zip file and re-downloaded it, and gone through the same steps to see if maybe it was just a bad file somehow. But to no avail, still having the same issues.
After you boot into cwm : wipe cache partition, then go into mounts and storage, format: system, data, cache :then go into advanced and wipe dalvick cache.
Now flash rom
Sent from my LG-P509 using xda premium
Ok just went through with what you had mentioned, and still getting the same results. "Sorry! The application VTL.Launcher (process android.process.acore) has stopped unexpectedly. Please try again. with the only option to force close. As soon as I force close, the same message pops up
Have you tryed flashing my rom?
I would try that, and see what happens.
You can always push a launcher with adb or Droid commander.
Sent from my LG-P509 using xda premium
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
XCmaster said:
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
Click to expand...
Click to collapse
Im outta suggestions, I think you might have a hardware problem, but can't be for sure on that.
I've never heard of anybody having that problem, let me know if you get the issue resolved
Sent from my LG-P509 using xda premium
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
XCmaster said:
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
Click to expand...
Click to collapse
Was your phone acting like that before you flashed openzio?
Sent from my LG-P509 using Tapatalk 2
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
XCmaster said:
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
Click to expand...
Click to collapse
I guess then its probably not a hardware issue.. hmm.. its almost Like the roms your flashing are getting corrupted some how.
Sent from my LG-P509 using Tapatalk 2
hmm.. .well maybe I'll format my sd and do a factory reset on the phone first, then try to flash the rom?
It gets to the end but shows install error 7 at the end, booted anyways, now just bootloops to eternity. No recovery is accessible only fastboot now.
Tried to install 3 recoveries through fastboot all passed but none bootup, factory resetted through fastboot, no go still. Not in anyway meant to steer people away from the ROM, others are reporting it is working fine for them. I can't and a few others it seems. Phones aren't done for, just temp out for the count.
Will clean up the thread and make things prettier but need to get to work, hopefully this gets some attention. Thanks for any help guys, I won't be able to trouble shoot for about 10 hours or more depending on work things.
Were you able to restore your backup, or perhaps adb push a new rom ?
If not, what is your fastboot getvar all output?
SaHiLzZ said:
Were you able to restore your backup, or perhaps adb push a new rom ?
If not, what is your fastboot getvar all output?
Click to expand...
Click to collapse
I can't access recovery. Others have posted they can get into recovery and revert back. I cannot get it to boot and stay in recovery for more then a second. I installed the latest cwm recovery before flashing all was fine. Any link to sideloading. Will try when I get home tonight, on a backup phone right now at work.
Sent from my LG-P999 using xda app-developers app
Also appears it is happening in the other 4.4 gpe rom. Reboots and such.
Sent from my LG-P999 using xda app-developers app
Time to RUU back!
SaHiLzZ said:
Time to RUU back!
Click to expand...
Click to collapse
That's what I figured, will have more fun tonight I guess and report back, thanks bud.
Sent from my LG-P999 using xda app-developers app
mt3g said:
That's what I figured, will have more fun tonight I guess and report back, thanks bud.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
So I tried it.
Got a boot loop to where i keep rebooting at the set up menu. -.-
I can't push via ADB for some reason, it says my HTC isnt found when the last time I tried, i removed all data, then adb pushed but that was dangerous .
sasaphrazz said:
So I tried it.
Got a boot loop to where i keep rebooting at the set up menu. -.-
I can't push via ADB for some reason, it says my HTC isnt found when the last time I tried, i removed all data, then adb pushed but that was dangerous .
Click to expand...
Click to collapse
So you side loaded and got it working now? Good news. Weird why its happening to some and not all. Dis you uncheck volume to wake option as well by chance? I'm just going to run the ruu when I get home later. Just need to read on how its done lol.
Sent from my LG-P999 using xda app-developers app
and im also on twrp 2633
To anyone that reads, me being stuck in an endless bootloop will a fastboot erase cache fix my issue? I've read that numerous times... thanks.
Sent from my LG-P999 using xda app-developers app
mt3g said:
So you side loaded and got it working now? Good news. Weird why its happening to some and not all. Dis you uncheck volume to wake option as well by chance? I'm just going to run the ruu when I get home later. Just need to read on how its done lol.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
I side loaded ARHD 31.0 HD fine.
what im probably gonna do is try sideloading it again, then S-OFFing my HTC. Idk why It wont let me s-off for some reason -.-
Tried without the volume thingy, still doesnt work btw.
Ok, cool. Did you check your download for md5 match. I didn't as the download size was correct, lazy and dumb move.
Sent from my LG-P999 using xda app-developers app
Okay now I need MAJOR help.
I deleted EVERYTHING off the sd.
I tried ADB sideloading and its not finding my device. I tried multiple drivers and still nothing. Im on Win 8.1
You should try it on windows 7
Ya I haven't read anything good about windows 8 and android. There is a thread around somewhere tho.
Sent from my LG-P999 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2543300 pass this around please
sasaphrazz said:
http://forum.xda-developers.com/showthread.php?t=2543300 pass this around please
Click to expand...
Click to collapse
How about you try a different computer not on win8??
Sent from my LG-P999 using xda app-developers app
just bricked mine too
This rom just bricked my htc one one too. i can't get to recovery no more... now im stuck on the fast boot and dont even know what to do next...can anyone help here plz...
mt3g said:
It gets to the end but shows install error 7 at the end, booted anyways, now just bootloops to eternity. No recovery is accessible only fastboot now.
Tried to install 3 recoveries through fastboot all passed but none bootup, factory resetted through fastboot, no go still. Not in anyway meant to steer people away from the ROM, others are reporting it is working fine for them. I can't and a few others it seems. Phones aren't done for, just temp out for the count.
Will clean up the thread and make things prettier but need to get to work, hopefully this gets some attention. Thanks for any help guys, I won't be able to trouble shoot for about 10 hours or more depending on work things.
Click to expand...
Click to collapse
---------- Post added at 08:35 AM ---------- Previous post was at 08:28 AM ----------
how to troubleshoot htc one from the fast boot btw...?
arso120120 said:
This rom just bricked my htc one one too. i can't get to recovery no more... now im stuck on the fast boot and dont even know what to do next...can anyone help here plz...
Click to expand...
Click to collapse
I just ran the ruu for my device, did it last night and all is good. What carrier and software do you have?
Sent from my HTC One using XDA Premium 4 mobile app
Good to know OP! Lucky you had a RUU to go back to!