One-Click Fastboot Restore to recover from bootloop or softbrick - Atrix 4G Android Development

Thanks to dhacker29 for the orginal idea and script!
Check out his orginal post for the Droid Bionic here!
Also, thanks to kennethpenn for providing the files you are about to use!
You have to be unlocked to use this!!
I AM NOT RESPONSIBLE FOR ANY THING THAT HAPPENS TO YOU OR YOUR PHONE!
I will try to help as much as possible, but that does not allow you to hold me responsible for anything whatsoever.
Step 1. Download this zip file and extract it, putting all the files in a folder.
Step 2. Download the file "One-Click Fastboot Restore.zip" and extract it, putting all the files in the same folder as the one above.
Step 3. Run the .bat file and follow the instructions.
DO NOT FIX PDS PARTITION UNLESS NECESSARY! IT WILL WIPE YOUR MAC ADDRESS FOR WIFI AND BLUETOOTH!
(Found some typos, not serious. Will fix soon)

No comments yet? I take that as a good sign, I haven't screwed up the script!

What does this do? Restore a backup from fastboot
Sent from my MB860 using XDA App

I'm also curious what exactly it does. At 140k it isn't replacing very much. Does it just fix files related to booting?

Didnt run it because I'm on linux and my phone is fine, but looking at the batch file, it automates flashing the stock gingerbread rom and restores PDS via fastboot.

when I run it, it gives me AdbWinApi.dll error. any suggestions?

I ran this for ****s and giggles and it returns everything back to stock AT&T 2.3 while giving you options along the way of what exactly you wanna restore to stock? webtop, system,pds, wipe data etc. works perfectly! makes life easier really! Phone booted right up after running no problems! Thanks!

beidave said:
when I run it, it gives me AdbWinApi.dll error. any suggestions?
Click to expand...
Click to collapse
Look for that dll file on Google and put it in the folder

Javi97100 said:
What does this do? Restore a backup from fastboot
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tapeworm_george said:
I'm also curious what exactly it does. At 140k it isn't replacing very much. Does it just fix files related to booting?
Click to expand...
Click to collapse
It restores your phone back to stock AT&T android via fastboot automatically. It also gives you the option to *fix* your pds partition.
It's also an alternative to RSD
Gutterball said:
I ran this for ****s and giggles and it returns everything back to stock AT&T 2.3 while giving you options along the way of what exactly you wanna restore to stock? webtop, system,pds, wipe data etc. works perfectly! makes life easier really! Phone booted right up after running no problems! Thanks!
Click to expand...
Click to collapse
Thanks for your reply, it assures me that the file isn't screwed up!

What happens if i run this on a non-US retail-EU Atrix?

Nevermind.
Sent from my MB860 using XDA App

hkkla said:
What happens if i run this on a non-US retail-EU Atrix?
Click to expand...
Click to collapse
Anyone has a clue? Is this a complete restore to out of the box-state?

sorry if this is a noob question. but dose this revert ext 4 format back to stock? haven't been keeping up lately and this ext 4 ext 3 stuff is new to me.

It restores it back to stock AT&T. EVERYTHING will be restored to stock.

hkkla said:
What happens if i run this on a non-US retail-EU Atrix?
Click to expand...
Click to collapse
It restores it back to stock AT&T. I tried this on an international Atrix.

Pardon my ignorance, i'm trying to restore a bricked Atrix 4G for a friend. It gave error Failed to boot SVF 105:1:2 0x1000 after bad upgrade. Is it possible to use this as a solution? How can i find that out? and in any case, i have downloaded all files, what's the correct procedure to do this?
Thanks in advance.

Anyone?
Sent from my X10i using XDA App

Barzobius said:
Anyone?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
If its already bricked it can't get much worse using this script. Try it.
Sent from my MB860 using Tapatalk

Phalanx7621 said:
If its already bricked it can't get much worse using this script. Try it.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Well, been trying but haven't been able to do anything with it. I mean I never used it before and seems like it needs to boot into fastboot mode which I haven't been able to do.
Is in any way possible to make the phone boot into that via usb cable with this software? I installed all requiered software including drivers but it never detected the phone in that (bricked) state, not even once. The phone turns a green light when u connect the usb without battery in, thats it.
I haven't found any solution yet, only seen ppl saying to buy a new one. Is this brick really that bad that there's absolutely no solution? And it all seems to be caused by lack of SBK as ive read on the net...
Well if there's any good news I would like to hear them
Sent from my X10i using XDA App

It's a hard brick. I'm sorry, but it cannot be fixed. You can always try a factory cable, but so far, nothing can be done. I feel your pain

Related

Returning rooted phone

As a quick FYI, I've returned two rooted Revolutions to Verizon with clockwork and both went through just fine. Anyone been charged for returning a rooted phone?
Sent from my VS910 4G using XDA App
returned my bricked rooted+rom'd LG ally without a problem.
Does anyone have the bloatware that came with this device? I will be shipping back my revo to Verizon in exchange for another phone, and I'm back on the stock room, but I'm missing bloatware. Also, how can I get the stock boot image back? I think they'll realize I was rooted when they see the Droid boot animation lol .
Samsuck said:
Does anyone have the bloatware that came with this device? I will be shipping back my revo to Verizon in exchange for another phone, and I'm back on the stock room, but I'm missing bloatware. Also, how can I get the stock boot image back? I think they'll realize I was rooted when they see the Droid boot animation lol .
Click to expand...
Click to collapse
If you have a back up from when you first rooted it should give you the stock boot.img. Then flash the stock rom found in the dev section. Then using revotoolkit.apk reinstall stock recovery. Then gingerbreak to unroot. Then update to zv6 from the about phone area and you should be good to go.
Sent from my VS910 4G using xda premium
crap...
I formatted my SD card recently, and kept my latest backup , but not my original
Is there anything I can do in regards to the boot.img?
Could someone be kind of enough to make a CWR zip file for me?
I'll even pay you $5 bucks or whatever sounds good.
Samsuck said:
crap...
I formatted my SD card recently, and kept my latest backup , but not my original
Is there anything I can do in regards to the boot.img?
Could someone be kind of enough to make a CWR zip file for me?
I'll even pay you $5 bucks or whatever sounds good.
Click to expand...
Click to collapse
My recommendation would be to flash this: http://forum.xda-developers.com/showthread.php?t=1129117
If it gives you the option to update, perhaps you should try that, and it may unroot your phone.
As far as CWM, I doubt the clerks are going to play with recovery... (that's not a guarantee, however).
If you are really desperate and scared, you should use the VZW tool for reflashing the phone, but I AM NOT RECOMMENDING IT. The tool has been known to do bad things to phones that need expert help to undo if not done properly (not only that, it's a pain in the arse).
Can I flash the boot image from that nandroid?
I was going to use the tool to run the downgrade again but I keep getting errors that I was not getting when I first rooted the phone. Mostly .msi installer package errors when selecting the .tot file.
If its in there it should be fine. If not i can make a zip of the stock boot.img when i get home but it will be about 7 central time.
Sent from my VS910 4G using xda premium
Samsuck said:
Can I flash the boot image from that nandroid?
I was going to use the tool to run the downgrade again but I keep getting errors that I was not getting when I first rooted the phone. Mostly .msi installer package errors when selecting the .tot file.
Click to expand...
Click to collapse
I don't think the boot image was included with the earlier ROMs. I *probably* have a few boot images from when I was working with Cubed on CWR, but I don't know which is which, and some of those actually can cause bricks. Boot image was p8? I don't even remember now.
As far as selecting the .tot file, it requires the support files... They come with the LGNPST Store & Lab... they would look like:
LGNPST_GenericModels_Ver_3_0_17_0.msi
I'm not positive which one is the right one as it's been a long time. Sorry this is vague, but I went through the process once, and then never again.
The person whose phone we recovered through this method had an issue after the flash where everything looked kosher, but the data would no longer work (no 3g, 4g, etc), and required Cubed's intervention to repair. So I haven't touched it since.
-mtmichaelson, thanks man, i'll just wait for you to be safe! I can wait. I'll buy you some brewski's.
-Majorpay: Yeah, I'm not too sure I want to play around with that program lol. It worked perfectly when I first rooted the phone, although I had to manually register the .dll but now it doesn't work at all.
Thanks again for all the help guys! ****, you guys have great support for this small Revo community.
Samsuck said:
-mtmichaelson, thanks man, i'll just wait for you to be safe! I can wait. I'll buy you some brewski's.
-Majorpay: Yeah, I'm not too sure I want to play around with that program lol. It worked perfectly when I first rooted the phone, although I had to manually register the .dll but now it doesn't work at all.
Thanks again for all the help guys! ****, you guys have great support for this small Revo community.
Click to expand...
Click to collapse
Alright, here you go! Let me know if there are any problems!
http://www.multiupload.com/X1DIJDNPCV
thanks man! worked perfectly. sent some money your way.
Samsuck said:
thanks man! worked perfectly. sent some money your way.
Click to expand...
Click to collapse
Thank you kind sir!
Sent from my VS910 4G using xda premium

[NEEDED] 6.893 100% stock backup

Does anyone have a backup of 6.893?
Typically I am very diligent, but somehow I forgot to make a backup of stock.
I have not switched to any other update. I have read through everything thoroughly and I apologize for failing to follow instructions. With 5 android devices and multiple flashes I have never missed this before. And I realized it as soon as I flashed TH3ORYS rom
From what I gather the easiest and most effective way to get back on track is to flash a stock 6.893 rom make a backup and move on from there.
I appreciate anyone's help!
I am also open to using this thread or creating one in delopment to post the stock roms of every version.
Sent from my DROID BIONIC using xda premium
http://forum.xda-developers.com/showthread.php?t=1279825
Restore the system apps and you'll be back to square one.
Mustang02 said:
http://forum.xda-developers.com/showthread.php?t=1279825
Restore the system apps and you'll be back to square one.
Click to expand...
Click to collapse
Not entirely true. His system will be back to 5.5.886, but his kernel/radio will be his previously upgraded 5.6.893. He is off the upgrade path until he gets the matching system file of 5.6.893. Only then can he continue updating. I just went through this exact thing, used the one step recovery, but went back to .886 and had to beg to find someone to send me a CWR back up of their 5.6.893, which got me back on track.
Oh yeah...nevermind. I completely thought you were wanting stock not the ota. That's what I get for speed reading.
stevessvt said:
Not entirely true. His system will be back to 5.5.886, but his kernel/radio will be his previously upgraded 5.6.893. He is off the upgrade path until he gets the matching system file of 5.6.893. Only then can he continue updating. I just went through this exact thing, used the one step recovery, but went back to .886 and had to beg to find someone to send me a CWR back up of their 5.6.893, which got me back on track.
Click to expand...
Click to collapse
You don't still have this do you? Because I am not above begging!
Sent from my DROID BIONIC using xda premium
I'm afraid I dont, I got back to 5.6.893 then immediately upgraded to 5.7.893 and backed that up, since .6.893 was no good to me any more. I'm sorry.
Someone out there has to have this!
....I hope
Sent from my DROID BIONIC using xda premium
Give this a try. (Can't post links yet)
rootzwiki.com/topic/8562-easily-upgrade-to-57893-and-keep-root/
I'm thinking you will only need steps 1 and 2.
Hope it helps!!
ripper2860 said:
Give this a try. (Can't post links yet)
rootzwiki.com/topic/8562-easily-upgrade-to-57893-and-keep-root/
I'm thinking you will only need steps 1 and 2.
Hope it helps!!
Click to expand...
Click to collapse
Wont it fail because I'm not coming from stock? And if I go all the way back it wont work because ill end up with a hybrid?
Sent from my DROID BIONIC using xda premium
I'm in the same situation. Yes, all attempts to upgrade fail because our sys filed don't match our radio. I need this nandroid as well.
Sent from my DROID BIONIC using Tapatalk
Giving someone a backup made on your device or restoring a backup made on someone else's device is an extremely foolhardy proposition. You are cloning the Android_id from one device to the other, which means that apps that use it as an identifier will push and pull data from both devices without any intervention from the unknowingly affected user.
system img
correct me if im wrong but, all we need is the system img right because im stuck with a hybrid
Does anyone know if restoring my 5.893 back up will work, or create a hybrid? I ask because I think it is the same radios?
Sent from my DROID BIONIC using xda premium
If anyone is just now rooting and starting to make their way up the update ladder I would greatly appreciate it if you would make a backup of 6.893 and send it to me. Thank you!
Sent from my DROID BIONIC using xda premium
Dakota0206 said:
If anyone is just now rooting and starting to make their way up the update ladder I would greatly appreciate it if you would make a backup of 6.893 and send it to me. Thank you!
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Check your pms and please don't share in case there is some of my data still left in the backup. just download all the files and put them in a folder and put in your clockwork backup folder on your sd/ext, probably the best way is to restore with advanced restore and just restore system only.
rgb2448 said:
Check your pms and please don't share in case there is some of my data still left in the backup. just download all the files and put them in a folder and put in your clockwork backup folder on your sd/ext, probably the best way is to restore with advanced restore and just restore system only.
Click to expand...
Click to collapse
Mad thanks!
Sent from my DROID BIONIC using xda premium
Dakota0206 said:
Mad thanks!
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Let me know if it works or you need some more help
I'm in the same boat here too. I hope someone can find a way to fix it soon. I'd really appreciate a backup too, but I understand the concern about data.
Calla969 said:
I'm in the same boat here too. I hope someone can find a way to fix it soon. I'd really appreciate a backup too, but I understand the concern about data.
Click to expand...
Click to collapse
What steps have you done already. and what is your current system and what updates have you done.
rgb2448 said:
Let me know if it works or you need some more help
Click to expand...
Click to collapse
rgb2448 said:
What steps have you done already. and what is your current system and what updates have you done.
Click to expand...
Click to collapse
I have really been through the ringer today. I started off this morning by noticing that I had no data at all. I was on 6.893 and TH3ORYROM 2.1 and have been for a few days with no trouble until today when I lost data. I tried everything to get it back, but nothing. I called VZW to make sure there wasn't a network problem in my area and they suggested that I try everything that I had already done (bat. pull, sim card re-register, turn off LTE radio, etc). When they couldn't fix anything, they wanted to transfer me to tier 2 tech support, but they apparently need to talk to me on a different phone so they can diagnose this one, but I didn't have access to another phone. So I decided I would try to flash one of the updates hoping it would reflash the radio file and wake it up. When I got home, I used the R3L3AS3DRoot to restore to stock and tried to install 7.893, but the update failed. I searched around and tried every method I could to get any of the updates to install, but nothing worked, still no 3g either. Eventually, in my desperate attempt to fix this myself I decided to wipe everything and start over. I wiped the webtop partition. I think that's what really screwed me up, because nothing else I did was any different that what I've done in the past. After wiping everything, I went back to the R3L3AS3DRoot and tried to run it. No matter which option I selected, it seemed to run fine, but I couldn't boot past the fastboot screen. I tried to fxz using RSD Lite, but every flash I tried failed. Then, in a panic, I came across P3's moto-fastboot method used to "get you back on the update path". I ran that and it freaking worked!! Then I figured I'd try to get up to 7.893, but I've tried absolutely everything I can find mention of and nothing works. Every install fails. I am getting some intermittent 3G now though. And to top it all off, I discovered that none of the nandroid backups I've made will restore and most of them don't even exist. I just discovered that I needed to check "use external storage" for the backups to take. I thought I had been covering my ass by making backups, but they weren't valid. Currently I have stock, rooted phone with an intermittent 3G signal. System Version 5.5.886, baseband CDMA_N_03.1C.57RLTEDC_U_05.15.02, kernel [email protected] #1, and build number 5.5.1_84_DBN-55. As I sit now, my plan is to see how it acts tomorrow and if I still have a lot of trouble with data, I will return it to stock unrooted and take it into a Verizon store and see if they will let me try a new SIM card. I don't really know what else to do at this point.

[Q] Bricked?

I was attempting to work through applying the .218 update to my droid 4. It was giving me a system validation error while when it was running in recovery. I found a thread that stated I needed to replace the apks and odex's as well as the build.prop. I didn't read it carefully enough as it said to replace *THE* problem ones. My validation error was on the build.prop file, I think.
In any case, I was using root explorer to copy *ALL* the files from a base zip file's app folder into the /system/app folder. Things were going along fine, until the phone app forced closed, then the phone rebooted.
Now I'm boot looping.
What can I do? I don't have any safe straps.
Can't access safestrap? Stock recovery? Adb services?
Sent from my DROID4 using Carrier Pigeons
The Magician Type 0 said:
Can't access safestrap? Stock recovery? Adb services?
Sent from my DROID4 using Carrier Pigeons
Click to expand...
Click to collapse
thanks for the reply...
I don't have safestrap installed on the device, and I've never used it. I don't think that's an option, unless you have something up your sleeve there
As for Stock recovery, I'd love to give it a try, but I don't know how that would work. I can't get to ADB because I can't boot the phone.
I *CAN* get into the bootloader. From there, I can get into recovery, AP Fastboot, BP SBF Flash BP boot... and others.
So, I'm hoping there's some kind of way to push to the device from one of the boot loader options. I've had a Droid 1, and a number of other android devices, but I've never gotten this far into a hole before.
again... thanks for whatever you got
It doesn't look good my friend, not without a SBF to flash. The only thing I can think of off the top of my head would be to try flashing the update again and cross your fingers that you got things in place before the bootloop. However I'm 99.9% sure that won't work. If I find anything else I'll let you now, but at this point you might be a sitting duck.
Sent from my DROID4 using Carrier Pigeons
The Magician Type 0 said:
It doesn't look good my friend, not without a SBF to flash. The only thing I can think of off the top of my head would be to try flashing the update again and cross your fingers that you got things in place before the bootloop. However I'm 99.9% sure that won't work. If I find anything else I'll let you now, but at this point you might be a sitting duck.
Sent from my DROID4 using Carrier Pigeons
Click to expand...
Click to collapse
I have the update on the SD Card, and nope, flashing it results in the same system validation error, and a bootloop.
thanks. Do you think that flashing the RAZR sbf's would get me a booting device? I only got the thing 14 days ago. Maybe I can exchange it
jbeazell said:
I have the update on the SD Card, and nope, flashing it results in the same system validation error, and a bootloop.
thanks. Do you think that flashing the RAZR sbf's would get me a booting device? I only got the thing 14 days ago. Maybe I can exchange it
Click to expand...
Click to collapse
If you're still in the 14 day return window I would try to return it. If it can't get past the bootloader than they won't know you rooted it. Just tell them you tried to do the update and it bootlooped. That's probably you're safest bet.
kwyrt said:
If you're still in the 14 day return window I would try to return it. If it can't get past the bootloader than they won't know you rooted it. Just tell them you tried to do the update and it bootlooped. That's probably you're safest bet.
Click to expand...
Click to collapse
I'm heading down there in a few minutes. Thanks for the help all ! I think I'm getting the razr maxx. My wife has one and the screen on that thing is incredible. I think it's worth losing the keyboard to get that screen... and the battery life. That part is also incredible.
again.. thanks.
BTW, you guys absolutely rock. You've helped me out of some serious holes with my OG Droid and other devices more often than I can count.
Sent from my DROID4 using Tapatalk 2
You can use bp tools to push over a clean system. I believe theres a tutorial somewhere that written for bionic. Just replace that with the droid 4 system. I would extract it from one of the stock roms available and push it thru bp tools.
Sent from my DROID4 using Tapatalk 2
Can you link that tutorial? I'm also trying to figure out how to use adb via stock recovery. Thanks!
Sent from my DROID4 using Carrier Pigeons
http://forum.xda-developers.com/showthread.php?t=1236465
Sent from my Galaxy Nexus using Tapatalk 2
Thanks!
Sent from my DROID4 using Carrier Pigeons
Let me know
Sent from my Galaxy Nexus using Tapatalk 2
It sounds like OP is going to exchange their phone, but could you really just replace the entire /system folder and have it work? (Nothing special with permissions, etc?)
If so, that is definitely something worth knowing...
Yes i believe so.
Sent from my DROID4 using Tapatalk 2

[Q] Need help. Missing files from /preinstall folder. Will donate to you :)

Would anybody mind uploading a zip file of their "/preinstall" system folder from their Droid 4? I'm missing some files from in there. Specifically the video files for the "Guided Tours" stock app. I must have deleted them a while back, and now I can't install the Jelly Bean OTA update.
I went back to stock, removed Safestrap and unrooted the phone to do the update. And when I go to do it, it gives me an error because those files weren't found. They don't seem to be in the Droid 4 Dump, so I guess I'm S.O.L. unless I can get them from somebody.
If I deleted those, I probably deleted something else from in there, so could you please send me the whole directory? I'd be happy to throw you a donation. Ten bones sound fair? Many thanks in advance.
Airman1947 said:
Would anybody mind uploading a zip file of their "/preinstall" system folder from their Droid 4? I'm missing some files from in there. Specifically the video files for the "Guided Tours" stock app. I must have deleted them a while back, and now I can't install the Jelly Bean OTA update.
I went back to stock, removed Safestrap and unrooted the phone to do the update. And when I go to do it, it gives me an error because those files weren't found. They don't seem to be in the Droid 4 Dump, so I guess I'm S.O.L. unless I can get them from somebody.
If I deleted those, I probably deleted something else from in there, so could you please send me the whole directory? I'd be happy to throw you a donation. Ten bones sound fair? Many thanks in advance.
Click to expand...
Click to collapse
Fast boot the ICS file with rsdlite or ICS utility. You'll be golden
Sent from my DROID4 using xda app-developers app
Thanks!
rruleford said:
Fast boot the ICS file with rsdlite or ICS utility. You'll be golden
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
Thanks so much for the fast reply!
Yeah, I think I did read something about those utilities in another post. I'm kind of iffy about going that route, because I've never used them before, and don't wanna like seriously mess up my phone. Was hoping to avoid it, but I guess it is what it is.
Alright, so is this the ICS Utility that I'm after?
http://forum.xda-developers.com/showthread.php?t=1779810
I just follow the instructions? And do you know if this will allow me to re-root afterwards? Thanks in advance.
Airman1947 said:
Thanks so much for the fast reply!
Yeah, I think I did read something about those utilities in another post. I'm kind of iffy about going that route, because I've never used them before, and don't wanna like seriously mess up my phone. Was hoping to avoid it, but I guess it is what it is.
Alright, so is this the ICS Utility that I'm after?
http://forum.xda-developers.com/showthread.php?t=1779810
I just follow the instructions? And do you know if this will allow me to re-root afterwards? Thanks in advance.
Click to expand...
Click to collapse
Yes and yes. Just DL the utility and fast boot ICS file. Unzip ICS file and move files to the files directory of utility. Make sure latest drivers are installed and battery is full connect phone run utility select boot into fast boot then option 11. Choosing to save files still won't let u install the update. Let it do its thing.
Sent from my DROID4 using xda app-developers app
rruleford said:
Fast boot the ICS file with rsdlite or ICS utility. You'll be golden
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
rruleford said:
Yes and yes. Just DL the utility and fast boot ICS file. Unzip ICS file and move files to the files directory of utility. Make sure latest drivers are installed and battery is full connect phone run utility select boot into fast boot then option 11. Choosing to save files still won't let u install the update. Let it do its thing.
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
You're awesome! Thanks. One more question (sorry). Should I unroot before I run this? Or does it not matter? Thanks again
phone will not be rooted after flashing xml recovery file, so does not matter
Sent from my Clear using xda premium
sd_shadow said:
phone will not be rooted after flashing xml recovery file, so does not matter
Sent from my Clear using xda premium
Click to expand...
Click to collapse
Rock on. Thank you so much. I'll try it in a bit.
rruleford said:
Yes and yes. Just DL the utility and fast boot ICS file. Unzip ICS file and move files to the files directory of utility. Make sure latest drivers are installed and battery is full connect phone run utility select boot into fast boot then option 11. Choosing to save files still won't let u install the update. Let it do its thing.
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
Went ahead and did it last night, and it worked! After using this to reset my ICS stock ROM, the OTA Jelly Bean Update installed just fine. Thanks a ton. I gotta say, this online community rocks! I love how helpful and supportive everybody is of each other.
One minor note, I had to do this on my roommate's Windows 7 computer to get it to work. I couldn't get it to work on either my laptop or desktop, both of which have Windows 8. The phone drivers wouldn't install. Strange; I downloaded the USB drivers from Motorola, and they appeared to install, but when I plugged my phone into the computer, and went to use the Utility, it kept giving me a "Device not found" error. And also, when I checked in "Device Manager," it showed my phone with an exclaimation point and said that the drivers weren't installed.
When I followed the same process on a Windows 7 computer, the drivers installed as soon as I plugged the phone in. Weird; Motorola's website said that the drivers were for Windows 7 and 8. I tried disabling "Signature Verification" on Windows 8, but that didn't work either. Anybody know if Motorola hasn't released Windows 8 drivers for Droid 4 yet? Just wanna know for future reference. Thanks a bunch.

[Q] Help Re-Rooting after OTA Update

hey guys i tried searching for answers. but had no success. i have a note 3 that was rooted with kingo. AT&T automatically installed an OTA update and of course it un rooted my phone. i still get the custom boot screen as well as still have safestrap on my device. my question is how do i reroot my device? ive tried kingo again and it fails after rebootong the phone 5 or 6 times. im still running 4.3 build is JSS15J.N900AUCUBNB4
i know a little on some things but im not as technical as most of you. but any help would be greatly appreciated.
Survivor058 said:
hey guys i tried searching for answers. but had no success. i have a note 3 that was rooted with kingo. AT&T automatically installed an OTA update and of course it un rooted my phone. i still get the custom boot screen as well as still have safestrap on my device. my question is how do i reroot my device? ive tried kingo again and it fails after rebootong the phone 5 or 6 times. im still running 4.3 build is JSS15J.N900AUCUBNB4
i know a little on some things but im not as technical as most of you. but any help would be greatly appreciated.
Click to expand...
Click to collapse
What version of Kingo did you try? Use 1.1.5 or 1.1.8. People have had success with that. 1.1.8 worked for me. Just Google around and you will find the download on the net somewhere.
theorioles33 said:
What version of Kingo did you try? Use 1.1.5 or 1.1.8. People have had success with that. 1.1.8 worked for me. Just Google around and you will find the download on the net somewhere.
Click to expand...
Click to collapse
it was 1.2.0 ill try an older version
In case you have trouble finding a copy
https://mega.co.nz/#!AxdHUCCQ!86DzctSWlXK4VfbInPYBgC_4QYAM2wUR8cewrflAyk0
theorioles33 said:
In case you have trouble finding a copy
unfortunately that did not work. the root failed. that was version 1.1.5, last night i tried 1.1.8 failed and tried the latest 1.2.0 with no success. would you recommend something else? i did try theese root methods with the sd card inserted im not sure if that is a no no or not
Click to expand...
Click to collapse
I'm at a loss. I had my SD card in by the way. Maybe someone else will have some ideas.
Sent from my SAMSUNG-SM-N900A using Tapatalk
theorioles33 said:
I'm at a loss. I had my SD card in by the way. Maybe someone else will have some ideas.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
that sucks. factory reset? ill most likely still have the issue but maybe not. isnt there a way to completely wipe the phone from the boot screen? id rather not if i dont have to.
You can try a factory reset and then root. If not there is a thread in the general section to go back to stock. Works great. I used it.
Sent from my SAMSUNG-SM-N900A using Tapatalk
theorioles33 said:
You can try a factory reset and then root. If not there is a thread in the general section to go back to stock. Works great. I used it.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
but arent i technically back to stock? since i dont have root access? this is very confusing to me. if my carrier didnt push that update i wouldnt be in this boat
You are but we can't figure out why you can't root when others in your situation can. There is Kingo thread you can check out. Maybe you can find some answers there.
Sent from my SAMSUNG-SM-N900A using Tapatalk
anyone have any suggestions?? 139 views in less than an hour someone has got to know something lol
Survivor058 said:
anyone have any suggestions?? 139 views in less than an hour someone has got to know something lol
Click to expand...
Click to collapse
Factory Reset after the update to NB4, also go to recovery wipe cache, then try the 1.18, during the rooting process, look your phone screen, you need to click accept something twice,
I don't know how it all works terribly well but you said you still have Safestrap? Can you still install ROMs and can they have root?
Also, for when you eventually do get it working again. I recommend freezing the ATT updater. It can be awful when it eventually FORCES an update.
I got a free app called App Quarantine and froze "AT&T Software Update".
coolmingli said:
Factory Reset after the update to NB4, also go to recovery wipe cache, then try the 1.18, during the rooting process, look your phone screen, you need to click accept something twice,
Click to expand...
Click to collapse
ok yea this is all french to me. you want me to factory reset? im not sure what the NB4 is?. and i thing i know how to wipe the cache.
Gary3 said:
I don't know how it all works terribly well but you said you still have Safestrap? Can you still install ROMs and can they have root?
Also, for when you eventually do get it working again. I recommend freezing the ATT updater. It can be awful when it eventually FORCES an update.
I got a free app called App Quarantine and froze "AT&T Software Update".
Click to expand...
Click to collapse
safestrap is on my phone but it cant be removed and just says that the phone isnt properly rooted. so no i cannot install roms and i will make sure that once i resolve this ill freezr that app
sorry for the delay guys im back at this again. i do very much appreciate all who are trying to offer assistance
ok guys so ive wiped the cache. and have done the factory reset. kingo 1.1.5 and 1.1.8 both have failed...... what is going on here maybe someone can skype with me the steps to completely flash my phone to the day i got it i see the thread but im scared ****less to try it lol
You will just have to follow the restore to MJ5 thread. The instructions are simple and very easy to follow. Go slow and follow them to the T.
What they do not mention however is do not use a 3.0 USB port. Only 2.0 will work.
Just follow that.
It is literally impossible to brick this phone to the point of it being unrecoverable. There is a tutorial to restore from hard bricks without J-Tag.
Sent from my SM-N9005A using XDA Premium 4 mobile app
graydiggy said:
You will just have to follow the restore to MJ5 thread. The instructions are simple and very easy to follow. Go slow and follow them to the T.
What they do not mention however is do not use a 3.0 USB port. Only 2.0 will work.
Just follow that.
It is literally impossible to brick this phone to the point of it being unrecoverable. There is a tutorial to restore from hard bricks without J-Tag.
Sent from my SM-N9005A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey graydiggy, I did the restore back to MJ5, but can't seem to get the last step for rooting to work. I tried every way with putting the rdlv on internal...unzipped and zipped. I even tried doing the same on the external sd as well. When I reboot supersu doesn't do anything. Any suggestion on how to get the last step to work?
Thanks in advance for your help.
chrispyutec said:
Hey graydiggy, I did the restore back to MJ5, but can't seem to get the last step for rooting to work. I tried every way with putting the rdlv on internal...unzipped and zipped. I even tried doing the same on the external sd as well. When I reboot supersu doesn't do anything. Any suggestion on how to get the last step to work?
Thanks in advance for your help.
Click to expand...
Click to collapse
It has to be unzipped and on the internal. You have to reboot a few times for it to activate. After the first reboot, let the phone sit for a few minutes and then reboot again. You should be good to go after that.
Sent from my SM-N9005A using XDA Premium 4 mobile app
graydiggy said:
It has to be unzipped and on the internal. You have to reboot a few times for it to activate. After the first reboot, let the phone sit for a few minutes and then reboot again. You should be good to go after that.
Sent from my SM-N9005A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wow that did the trick!!! Thanks for holding my hand lol. I hit your thanks and I appreciate your help.

Categories

Resources