Related
Just knocked together this splash screen for all your s-off phones to make it look a bit diff
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
splashnew.img
splashCM.img
Hope u all like
[To install]
What you need
-- Fastboot set up
-- the attached spashnew.zip
1) extract the .img from the zip file
2) reboot into fastboot mode
3) run
fastboot flash splash1 splash.img
Click to expand...
Click to collapse
(Replace splash.img with the .img u want
4) run
fastboot reboot
Click to expand...
Click to collapse
Have Fun
Thanks for these, the first one looks brilliant on my device!
Thanks for the instructions, if anyone wants some more really nice ones for Cyanogen look here:
http://forum.xda-developers.com/showthread.php?t=807130
I'm using #4, looks great on DHD!
Awesome, this is something I've wanted to do for a long time. many thanks
Cheers Apache.
Can someone please post the original DesireHD splash?
Thanks
I used another Cyanogen spalsh screen......who wants the crappy green HTC anyways hahaha..
Is there a way to flash this without using a PC and fastboot?
I've read in other forums and tried to rename the zip PD98IMO.ZIP and flash in automatically from HBOOT but I get an error because android-info.txt isn't correct for this phone.
Can anyone help please?
Sent from my CyanogenMod Desire HD
timstanley1985 said:
Is there a way to flash this without using a PC and fastboot?
I've read in other forums and tried to rename the zip PD98IMO.ZIP and flash in automatically from HBOOT but I get an error because android-info.txt isn't correct for this phone.
Can anyone help please?
Sent from my CyanogenMod Desire HD
Click to expand...
Click to collapse
THIS IS NOT RECOMMENDED AND YOU MIGHT BRICK YOUR DEVICE, but you can save the .img file in your SD-Card and using a terminal application type:
Code:
dd if=/sdcard/splash.img of=/dev/block/mmcblk0p19
it should work, but I take no responsibility, you've been warned.
Anyway, here's my contribution (you can find it attached, unzip first) :
View attachment hungry.7z
phunkycow said:
THIS IS NOT RECOMMENDED AND YOU MIGHT BRICK YOUR DEVICE, but you can save the .img file in your SD-Card and using a terminal application type:
Code:
dd if=/sdcard/splash.img of=/dev/block/mmcblk0p19
it should work, but I take no responsibility, you've been warned.
Anyway, here's my contribution (you can find it attached, unzip first) :
View attachment 462548
Click to expand...
Click to collapse
Haha, the picture is cute. Definitely using it.
So cuuuute ! I use it thanks
phunkycow said:
THIS IS NOT RECOMMENDED AND YOU MIGHT BRICK YOUR DEVICE, but you can save the .img file in your SD-Card and using a terminal application type:
Code:
dd if=/sdcard/splash.img of=/dev/block/mmcblk0p19
it should work, but I take no responsibility, you've been warned.
Anyway, here's my contribution (you can find it attached, unzip first) :
View attachment 462548
Click to expand...
Click to collapse
nice one. currently on my dhd now
nailmind said:
nice one. currently on my dhd now
Click to expand...
Click to collapse
On mine too Very nice one!
Hi Appache,
I'm pretty new in the Android platform so I do apologize for the silly question
I could not flash the image. I'm getting this:
Code:
C:\Program Files (x86)\Android\android-sdk-windows\tools>fastboot.exe flash spla
sh1 splash.img
sending 'splash1' (750 KB)... OKAY [ 0.186s]
writing 'splash1'... FAILED (remote: not allowed)
finished. total time: 0.187s
I have rebooted the phone (screenshot attached) - is that OK?
... and run the command as you adviced in the 1st post.
I have S-OFF (as you can see from the screenshot). I've rooted, unlocked the phone according you guide here: http://forum.xda-developers.com/showthread.php?t=857444
Another question would be: Can I somehow replace the carrier logo in the phone? Is that splash2 or I'm completely wrong?
Thanks for all your effort man!
snooffy said:
Hi Appache,
I'm pretty new in the Android platform so I do apologize for the silly question
I could not flash the image. I'm getting this:
Code:
C:\Program Files (x86)\Android\android-sdk-windows\tools>fastboot.exe flash spla
sh1 splash.img
sending 'splash1' (750 KB)... OKAY [ 0.186s]
writing 'splash1'... FAILED (remote: not allowed)
finished. total time: 0.187s
I have rebooted the phone (screenshot attached) - is that OK?
... and run the command as you adviced in the 1st post.
I have S-OFF (as you can see from the screenshot). I've rooted, unlocked the phone according you guide here: http://forum.xda-developers.com/showthread.php?t=857444
Another question would be: Can I somehow replace the carrier logo in the phone? Is that splash2 or I'm completely wrong?
Thanks for all your effort man!
Click to expand...
Click to collapse
You need ENG-OFF to use ADB. You can put ENG-OFF over S-OFF.
You were absolutely right mate. Done eng s-off and it went like a charm. Nice one, thanks. Oh and about the orange logo I winged about in my question - that's sorted by a different ROM
Apache14 said:
Just knocked together this splash screen for all your s-off phones to make it look a bit diff
Click to expand...
Click to collapse
Thank you, dude!
Just a little contribution...
Something sexy...
splash1.img attached
Here is mine
http://db.tt/70oe5ZU
Sent from my LeeDrOiD loaded HTC Desire HD using my thumb....
How to edit the image file? What apps to use? Photoshop ?
Incredible S, I have S-Off but no Root?
Hi, I have an Incredible S it had HBOOT 2.00, but i used XTC Clip to gain S-Off, it appears to have worked luckily, as it now says:
VIVO PVT SHIP S-OFF RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011,20:33:03
So what do i do now to gain Root?
Any help would be appreciated, thanks.
Regards,
S
Scythefx said:
Incredible S, I have S-Off but no Root?
Hi, I have an Incredible S it had HBOOT 2.00, but i used XTC Clip to gain S-Off, it appears to have worked luckily, as it now says:
VIVO PVT SHIP S-OFF RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011,20:33:03
So what do i do now to gain Root?
Any help would be appreciated, thanks.
Regards,
S
Click to expand...
Click to collapse
Have you installed adb and fastboot on you Pc?
If yes, boot into fastboot usb, copy the attached file to the fastboot folder
open cmd in the folder with the adb and fastboot driver and write
fastboot flash recovery recovery-clockwork-5.0.2.0-vivo.img
boot than again into bootloader and select recovery
than toggle usb mount, copy this file downloads.androidsu.com/superuser/su-3.0-efgh-signed.zip to you sd card
than disconnect, install zip from sd card and select the superuser zip file.
after that reboot and you're rooted
There would be enough tutorials, but today i'm really "nice"... unbelieveable.
Thanks for your help, and the files, i will try that tonight.
I had just started reading the tutorials and looking at apps like Gingerbreak etc, would have taken me a while to figure out the best option, so much appreciated, thanks again.
Regards,
S
Scythefx said:
Thanks for your help, and the files, i will try that tonight.
I had just started reading the tutorials and looking at apps like Gingerbreak etc, would have taken me a while to figure out the best option, so much appreciated, thanks again.
Regards,
S
Click to expand...
Click to collapse
Gingerbreak is ****ty
Sent from my Incredible S using xda premium
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Scythefx said:
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Click to expand...
Click to collapse
No, you should not need ENG S-OFF to flash a custom recovery. If you are using a Windows PC, besides the adb.exe and fastboot.exe have you installed the HTC drivers?
Yes i installed them all including the HTC Sync and then uninstalled HTC Sync as suggested, perhaps it did not leave the drivers when i did that, I will look into it.
Thanks, i was not sure if i needed ENG S-OFF.
S
Scythefx said:
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Click to expand...
Click to collapse
Could you cut and paste the whole command window so we can see the Fastboot command you typed as well as the error response you get.
Scythefx said:
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Click to expand...
Click to collapse
On second thought, the reason the fastboot flash recovery command is failing is that even though you have S-OFF, the HBOOT is locked and some of the fastboot commands are disabled, thus the "remote: not allowed" message.
I have attached a PG32IMG.zip file that you can copy to your SD card (copy the file and rename it PG32IMG.zip) and then boot into HBOOT and it will flash CWM recovery from the zip file.
Then you can boot into CWM recovery and flash the su-3.0 zip file to gain root.
Hi here is the pic on my cmd.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uploaded with ImageShack.us
thanks
Thanks tpbklake i will try that.
Scythefx said:
Hi here is the pic on my cmd.
Uploaded with ImageShack.us
thanks
Click to expand...
Click to collapse
OK, thanks. Give the attached PG32IMG.zip file in my other post a shot. That should work and get CWM installed and then you can flash su-3.0.zip in recovery mode.
Unfortunately the file you attached is only 1kb when downloaded, even though it says 3.6mb? next to it, could you check it, i have tried a few times, thanks for your help.
S
Scythefx said:
Unfortunately the file you attached is only 1kb when downloaded, even though it says 3.6mb? next to it, could you check it, i have tried a few times, thanks for your help.
S
Click to expand...
Click to collapse
Sorry about that. Please try it again.
Thanks again, i believe it worked, so i deleted the PG32IMG and have now copied su-3.0-efgh-signed to the sd card.
Now in HBOOT it has
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
HBOOT USB
IMAGE CRC
how do i go about running the 'su-3.0-efgh-signed.zip' do i do it from here?
S
Scythefx said:
Thanks again, i believe it worked, so i deleted the PG32IMG and have now copied su-3.0-efgh-signed to the sd card.
Now in HBOOT it has
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
HBOOT USB
IMAGE CRC
how do i go about running the 'su-3.0-efgh-signed.zip' do i do it from here?
S
Click to expand...
Click to collapse
Going back to the instructions listed above, select RECOVERY and that should put you in ClockworkMod Recovery. Use the Volume Up Down keys to select a menu item and push the Power button to select it.
First I would make a backup by selecting the 'backup and restore' menu.
Next you would choose the 'install zip from SDcard' and then 'choose zip file from SDcard' Select the SU-3.0....zip file
Then select the 'reboot system now'
Unfortunately i already did it, so did not get to backup , everything seems to have gone well, but now titanium backup and superuser do not seem to work, says no root access still, titanium said something about busybox?
Strange as everything seem to go well after your help.
S
Scythefx said:
Unfortunately i already did it, so did not get to backup , everything seems to have gone well, but now titanium backup and superuser do not seem to work, says no root access still, titanium said something about busybox?
Strange as everything seem to go well after your help.
S
Click to expand...
Click to collapse
What does the Superuser app do when you try to launch it?
It comes up with a white screen with apps and logs listed at the top under the superuser logo, the logs have a couple of items listed that were denied, like lucky patcher and titanium.
Scythefx said:
It comes up with a white screen with apps and logs listed at the top under the superuser logo, the logs have a couple of items listed that were denied, like lucky patcher and titanium.
Click to expand...
Click to collapse
Do you have Terminal Emulator app? You could dowload that and then run it. On the terminal screen then type the command 'su' and hit the Return key. You should get a prompt from the Superuser app to allow and then the prompt in the terminal window should change to a #.
Hi
my phone information is
unlocked ship s-on
hboot 2.27.0000
os-2.25.1403.1
CID HTCCN704
MID PN0780000
CWM V6.0.37
no ROM installed yet only work hboot and cwm.
when i choice rom from sd show me this meg:
cant open /external_sd/pno7img_m7c_dtu_jb_50_s1_htccn_chs_cmcc_...................zip (bad)
tried install another one show me this msg
error in /external_sd 802t.zip (status 6)
any help please
i downloaded ROM from here http://forum.xda-developers.com/showthread.php?t=2617159
thank you
dlshad said:
Hi
my phone information is
cant open /external_sd/pno7img_m7c_dtu_jb_50_s1_htccn_chs_cmcc_...................zip (bad)
thank you
Click to expand...
Click to collapse
Sounds like a bad download, make sure MD5 is correct.
nkk71 said:
Sounds like a bad download, make sure MD5 is correct.
Click to expand...
Click to collapse
thank you for respond ..
what you mean about MD5 how can i check its correct or not ?
dlshad said:
thank you for respond ..
what you mean about MD5 how can i check its correct or not ?
Click to expand...
Click to collapse
Refer to nkk71 guide under ''Not so FAQ #1''
alray said:
Refer to nkk71 guide under ''Not so FAQ #1''
Click to expand...
Click to collapse
i read it but cant find htc 802t (T) verstion there
dlshad said:
i read it but cant find htc 802t (T) verstion there
Click to expand...
Click to collapse
the link I gave you is only to understand what is MD5, there is nothing explicitly for the 802t.
You can use winmd5 to check md5 value.
alray said:
Refer to nkk71 guide under ''Not so FAQ #1''
Click to expand...
Click to collapse
alray said:
the link a gave you is only to understand what is MD5, there is nothing explicitly for the 802t.
You can use winmd5 to check md5 value.
Click to expand...
Click to collapse
IC thanks dear
dlshad said:
IC thanks dear
Click to expand...
Click to collapse
to get the md5 value, go back to the webpage where you have downloaded the file. then use winmd5 to calculate md5 value of the downloaded file. The value must be same exact thing as that one on the download page.
i.e If I download arhd 53 rom from this page:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then I must check md5 of my downloaded file using WinMD5 and it must be DF9854F79C6E6928BEFD6EC43EC9F4A5
if not then its a bad download and the rom will not flash properly.
hope its clear for you
alray said:
the link I gave you is only to understand what is MD5, there is nothing explicitly for the 802t.
You can use winmd5 to check md5 value.
Click to expand...
Click to collapse
lol, maybe i should
guide here
the guide and just keep the FAQ section
nkk71 said:
lol, maybe i should
guide here
the guide and just keep the FAQ section
Click to expand...
Click to collapse
thank you i check it by free tools it was same MD5 its : 9898b157f9413d0d40b3b25ff0c42c73
So whats the problem then ?
i change sd and same problem
i heard about S-off should i make it S off or its different problem..any ideas please
thx
dlshad said:
thank you i check it by free tools it was same MD5 its : 9898b157f9413d0d40b3b25ff0c42c73
So whats the problem then ?
i change sd and same problem
i heard about S-off should i make it S off or its different problem..any ideas please
thx
Click to expand...
Click to collapse
what are you trying to flash? that thread you linked shows RUUs... ruu's are flashed in ruu mode:
in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip <name of file>.zip
fastboot flash zip <name of file>.zip <- yes TWICE!!
fastboot reboot-bootloader
though if you are S-On, then only an official signed package (same or higher version) will work, I don't know if those are signed or not.
nkk71 said:
what are you trying to flash? that thread you linked shows RUUs... ruu's are flashed in ruu mode:
in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip <name of file>.zip
fastboot flash zip <name of file>.zip <- yes TWICE!!
fastboot reboot-bootloader
though if you are S-On, then only an official signed package (same or higher version) will work, I don't know if those are signed or not.
Click to expand...
Click to collapse
im using teanwin recovery v2.6.3.4
tried CWM before samw msg
dlshad said:
im using teanwin recovery v2.6.3.4
tried CWM before samw msg
Click to expand...
Click to collapse
try opening the zip (both using windows explorer and WinRAR) and let me know the contents (screenshot).... if windows explorer is able to open it, then it's not a signed zip and won't work with S-On.
nkk71 said:
try opening the zip (both using windows explorer and WinRAR) and let me know the contents (screenshot).... if windows explorer is able to open it, then it's not a signed zip and won't work with S-On.
Click to expand...
Click to collapse
cant unzip by winrar
is that mean i should change security off to install this ROM? if yes how can i change it
thanks dear
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in recovery_signed.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in system.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in dzdata_32g.img. The file is corrupt
dlshad said:
cant unzip by winrar
is that mean i should change security off to install this ROM? if yes how can i change it
thanks dear
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in recovery_signed.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in system.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in dzdata_32g.img. The file is corrupt
Click to expand...
Click to collapse
ah then it seems it's a signed zip (since you said MD5 is correct), which you can flash with S-On... go for it, and copy/paste command prompt should you get an error.
remember the flash zip has to be done twice!!
Zip header checking
Failed (remote) 32 header error
dlshad said:
Zip header checking
Failed (remote) 32 header error
Click to expand...
Click to collapse
can you copy/paste the entire command prompt, even the fastboot oem rebootRUU etc...
for example:
Code:
C:\ADB3>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.047s]
finished. total time: 0.047s
C:\ADB3>fastboot flash zip ruu.zip
sending 'zip' (1033216 KB)...
OKAY [ 41.559s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 43.118s
etc...
cause that does sound like a corrupt zip, not a signed one ... can you give me the link to the exact one you're using, I'll try downloading it later.
http://d-h.st/l16 1.07G
and
http://d-h.st/1AZ 816mb
thanks Dear a lot
dlshad said:
http://d-h.st/l16 1.07G
and
http://d-h.st/1AZ 816mb
thanks Dear a lot
Click to expand...
Click to collapse
well you can forget the 2.09.1403.1 ruu, since you're already on "os-2.25.1403.1"... that would be a downgrade, so wouldn't work unless S-Off
and can you post a "fastboot getvar all" (excluding IMEI, MEID, and s/n).... i'll try downloading the 4.21.1403.31 version and see what that looks like... but it'll take a few hours at least, so nothing before tomorrow probably
nkk71 said:
well you can forget the 2.09.1403.1 ruu, since you're already on "os-2.25.1403.1"... that would be a downgrade, so wouldn't work unless S-Off
and can you post a "fastboot getvar all" (excluding IMEI, MEID, and s/n).... i'll try downloading the 4.21.1403.31 version and see what that looks like... but it'll take a few hours at least, so nothing before tomorrow probably
Click to expand...
Click to collapse
Hello Guys,
Now it s finally here
working root for ze550kl, a very big thanks to @shakalaca,
he developed this, full credit goes to him. :fingers-crossed:
Version 1.15.40.639
original thread source
http:// www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=111151&extra=page=1
Before starting root procedure make sure that you have backup all installed apks, in order to avoid apk update after installing patched firmware, as it consume more bandwidth & time.
Steps to Root
1- Download the full version of firmware patch: new version folder 1.15.40.639.
https://mega.nz/#F!lodnzDhK!H5ChxausDTyko1qGlnF7dw!Fg9FwLoa
2- Descompress system.img.7z with 7zip program
3- Copy the boot.img / system.img / recovery.img to (adb/fastboot) folder.
4- Execute this commands in sequence:
-adb device
-adb reboot bootloader
-fastboot devices
-fastboot erase userdata
-fastboot erase cache
-fastboot flash boot boot.img
-fastboot flash recovery recovery.img
-fastboot flash system system.img
It will take some time to finish approx 10 min, let it finish
-fastboot reboot
first time, it will take more time than usual, as it will build cache, if stuck more than 15 minute, remove battery & charging (if charging) & after insert battery after 2 min, go to recovery mode, wipe factory/data, erase cache, reboot system.
It will take some time to restart be patient.
now you do not need to install any super user it s already there.
Enjoy,
@shakalaca thanks again
Tried & working well
adaway .
busy box
titanium backup
root explorer
working xposed may be find here
http://forum.xda-developers.com/zenfone-2-laser/general/wroking-xposed-ze550kl-t3247915
Hope you will enjoy.
Press thanks, if it helps you
I hope some day we will get CM or AOSP rom
codejam100 said:
I hope some day we will get CM or AOSP rom
Click to expand...
Click to collapse
yes hope so, but for that we need unlock bootloader, which is not possible till yet.
rajlko said:
Hello Guys,
Now it s finally here
working root for ze550kl, a very big thanks to @shakalaca,
he developed this, full credit goes to him. :fingers-crossed:
Version 1.15.40.639
original thread source
http:// www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=111151&extra=page=1
Before starting root procedure make sure that you have backup all installed apks, in order to avoid apk update after installing patched firmware, as it consume more bandwidth & time.
Steps to Root
1- Download the full version of firmware patch: new version folder 1.15.40.639.
https://mega.nz/#F!lodnzDhK!H5ChxausDTyko1qGlnF7dw!Fg9FwLoa
2- Descompress system.img.7z with 7zip program
3- Copy the boot.img / system.img / recovery.img to (adb/fastboot) folder.
4- Execute this commands in sequence:
-adb device
-adb reboot bootloader
-fastboot devices
-fastboot erase userdata
-fastboot erase cache
-fastboot flash boot boot.img
-fastboot flash recovery recovery.img
-fastboot flash system system.img
It will take some time to finish approx 10 min, let it finish
-fastboot reboot
first time, it will take more time than usual, as it will build cache, if stuck more than 15 minute, remove battery & charging (if charging) & after insert battery after 2 min, go to recovery mode, wipe factory/data, erase cache, reboot system.
It will take some time to restart be patient.
now you do not need to install any super user it s already there.
Enjoy,
@shakalaca thanks again
Tried & working well
adaway .
busy box
titanium backup
root explorer
working xposed may be find here
http://forum.xda-developers.com/zenfone-2-laser/general/wroking-xposed-ze550kl-t3247915
Hope you will enjoy.
Press thanks, if it helps you
Click to expand...
Click to collapse
Sir.
What new in this ? And
Can we use some of the file like system. 001 orr 002 of before zip means of build 496.,or we have to download all these again.
harshk60 said:
Sir.
What new in this ? And
Can we use some of the file like system. 001 orr 002 of before zip means of build 496.,or we have to download all these again.
Click to expand...
Click to collapse
【Version】
V1.15.40.639
【Model Name】
ZenFone 2 Laser (ZE550KL)
【Release Date】
2015/11/10
【Release Note】
1 Imrpoved phone call quality.
2 Improved photo quality in HDR mode.
3 Fine-tune camera image detail and noise improvement.
4 Updated camera shutter/focus animation and improve shooting speed.
# New Features
1 Camera shutter up to 32 seconds in Manual mode.
2 Add ZenFlash App, the first external Xenon Flashlight for mobile devices.
It can fulfill the demand of professional photographers in rendering dark detail and strengthen delicate sense.
At present we do not have dedicated developers, so we need to download all image files every times we got new working root for new update.
rajlko said:
【Version】
V1.15.40.639
【Model Name】
ZenFone 2 Laser (ZE550KL)
【Release Date】
2015/11/10
【Release Note】
1 Imrpoved phone call quality.
2 Improved photo quality in HDR mode.
3 Fine-tune camera image detail and noise improvement.
4 Updated camera shutter/focus animation and improve shooting speed.
# New Features
1 Camera shutter up to 32 seconds in Manual mode.
2 Add ZenFlash App, the first external Xenon Flashlight for mobile devices.
It can fulfill the demand of professional photographers in rendering dark detail and strengthen delicate sense.
At present we do not have dedicated developers, so we need to download all image files every times we got new working root for new update.
Click to expand...
Click to collapse
Ok thnx.
Phone protected.....??
I downloaded these files and The CACHE and USERDATA got deleted,
but when I tried to flash the boot.img and recovery.img with fastboot, in both cases got the message:
FAILED (remote: Permission denied, phone is protected).
I did not even try to flash the system.img
Then when I did a fastboot reboot, I just got the ASUS screen with a spinning wheel during boot.
IDEAS?
bert269 said:
I downloaded these files and The CACHE and USERDATA got deleted,
but when I tried to flash the boot.img and recovery.img with fastboot, in both cases got the message:
FAILED (remote: Permission denied, phone is protected).
I did not even try to flash the system.img
Then when I did a fastboot reboot, I just got the ASUS screen with a spinning wheel during boot.
IDEAS?
Click to expand...
Click to collapse
please share cmd log & build number you are using.
rajlko said:
please share cmd log & build number you are using.
Click to expand...
Click to collapse
Build 1.15.40.639
And here is the cmd log:
C:\adb>adb devices
List of devices attached
F9AZCY251451 device
C:\adb>adb reboot bootloader
C:\adb>fastboot devices
F9AZCY251451 fastboot
C:\adb>fastboot erase userdata
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 1.084s]
finished. total time: 1.084s
C:\adb>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.011s]
finished. total time: 0.011s
C:\adb>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (24545 KB)...
OKAY [ 0.772s]
writing 'boot'...
FAILED (remote: Permission denied, phone is protected)
finished. total time: 0.773s
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (26507 KB)...
OKAY [ 0.833s]
writing 'recovery'...
FAILED (remote: Permission denied, phone is protected)
finished. total time: 0.834s
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.001s
C:\adb>
Thank you!
bert269 said:
Build 1.15.40.639
And here is the cmd log:
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.001s
C:\adb>
Thank you!
Click to expand...
Click to collapse
Please share your exact model number & current build you have in your phone.
Setting>about device
like z00ld, 1.13.40.496 or 1.15.40.639.
rajlko said:
Please share your exact model number & current build you have in your phone.
Setting>about device
like z00ld, 1.13.40.496 or 1.15.40.639.
Click to expand...
Click to collapse
Model: Z00TD
Baseband: 202c10_10.0.0_151008
Build: LRX22G.WW_user_1.15.40.639_20151029
044030520_201505210103
001000200001
bert269 said:
Model: Z00TD
Baseband: 202c10_10.0.0_151008
Build: LRX22G.WW_user_1.15.40.639_20151029
044030520_201505210103
001000200001
Click to expand...
Click to collapse
you having issue because of different model number, this root is for z00ld.
Thanx..
Works Perfect for me..root and xpose both
rajlko said:
you having issue because of different model number, this root is for z00ld.
Click to expand...
Click to collapse
Oooooops, sorry.
Thanks!
Have a little problem there, after flashing, all was ok, but the first turning still lasts more then 20 minutes. How can i enter recovery mode?
UPD:
You can enter Recovery by pressing volume dn + power or by fastboot oem reboot-recovery
fastboot mode zenfone laser 2? how? it has no volume buttons? (zenfone 2 Qualcom Snapdragon unit here)
asukaragnaboy said:
fastboot mode zenfone laser 2? how? it has no volume buttons? (zenfone 2 Qualcom Snapdragon unit here)
Click to expand...
Click to collapse
As a first time ZenFone user, this baffled me too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xyberz09 said:
As a first time ZenFone user, this baffled me too.
Click to expand...
Click to collapse
hahaha!! So that's what it is, i thought it's just a design or something.. Thanks man..
---------- Post added at 10:40 AM ---------- Previous post was at 10:39 AM ----------
I have another question, do I need to make the zenfone laser goto fastboot, so I could determine if it's in ADB mode? and see it if it's in my device manager lists?
asukaragnaboy said:
hahaha!! So that's what it is, i thought it's just a design or something.. Thanks man..
---------- Post added at 10:40 AM ---------- Previous post was at 10:39 AM ----------
I have another question, do I need to make the zenfone laser goto fastboot, so I could determine if it's in ADB mode? and see it if it's in my device manager lists?
Click to expand...
Click to collapse
If you only need to connect to it using ADB, you don't need to enter fastboot. Just enable USB Debugging in Developer Options and connect it to your computer using a USB cable. You must have ASUS USB drivers installed prior to doing this and just MAYBE you need to boot your Windows PC with TESTSIGNING on (I don't know if it works with it off. I always have it enabled).
Run the
Code:
adb devices
command and it should show.
Thanks for the inquiry, I'll be trying that later
How to install Xiaomi.eu ROM for Redmi Note 10 Pro
We will release fastboot ROM versions until TWRP for sweet is released
TWRP is released, so install our ROM as usually
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Update Global ROM to the latest via updater app first..
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file xiaomi.eu_multi_HMNote10Pro_V12.0.6.0.RKFMIXM_v12-11.zip
- If you are on Windows: Right click on downloaded zip - Settings - Unblock zip content
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 15min)
Steps to install update of xiaomi.eu ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
Update guide on the video
- After reboot its done (first boot may take up to 10min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Enjoy..
Do we have root/magisk with it?
Lycox said:
Do we have root/magisk with it?
Click to expand...
Click to collapse
nope.. if you need ROOT, you have to install Magisk by yourself..
Is there any way to unlock bootloader without wiping data?
saaqirajput said:
Is there any way to unlock bootloader without wiping data?
Click to expand...
Click to collapse
Unfortunately, no.
Also since we already have a custom TWRP available for Sweet, would it be possible to have a non-fastboot ROM for xiaomi.eu ?
Bloblom said:
Unfortunately, no.
Also since we already have a custom TWRP available for Sweet, would it be possible to have a non-fastboot ROM for xiaomi.eu ?
Click to expand...
Click to collapse
ok, released flashable zip for TWRP
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10Pro_V12.0.6.0.RKFMIXM_v12-11.zip/download
ingbrzy said:
ok, released flashable zip for TWRP
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10Pro_V12.0.6.0.RKFMIXM_v12-11.zip/download
Click to expand...
Click to collapse
Can we install the zip rom on top of the stock rom without installing fastboot version first?
sure..
ingbrzy said:
ok, released flashable zip for TWRP
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10Pro_V12.0.6.0.RKFMIXM_v12-11.zip/download
Click to expand...
Click to collapse
Thanks, it works perfectly.
Wonderful to see a working TWRP and xiaomi.eu so soon after the phone's release.
Hello,
I followe the guided, but after 30 minutes, the procedure is freezed in sending data.
I stopped and relaunched tha .bat files, but it says:
Missmatching image and device
Now the phone is in fastboot mode, what can I do?
Thanks
Edit:
I disconnected the device, rebooted in fastboot and restart the flash, but I have the following error:
Finished. Total time: 128.911s
Erasing 'metadata' OKAY [ 0.003s]
Finished. Total time: 16.693s
Erasing 'userdata' OKAY [ 0.372s]
F2FS-tools: mkfs.f2fs Ver: 1.13.0 (2019-09-24)
Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 224550872 (109643 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
[f2fs_init_sit_area: 556] Filling sit area at offset 0x00600000
E:\temp\xioami.eu_12.0.6.0\platform-tools-windows/make_f2fs failed: 3221225477
fastboot: error: Cannot generate image for userdata
Rebooting OKAY [ 0.000s]
Finished. Total time: 0.002s
Edit2:
Phone booted but it says it doesn't have the play protect certification.
So since there is already a custom TWRP available, will you stop making the fastboot ROM version? is that I'm less than 12h to unlock the bootloader and I didn't want to be installing a version and then having to delete everything and install the version by TWRP ...
yes.. there is no point of fastboot rom version when TWRP is released..
ingbrzy said:
yes.. there is no point of fastboot rom version when TWRP is released..
Click to expand...
Click to collapse
I can't find the twrp version rom please upload the rom once more thank you
ROM reuploaded..
fixed SafetyNet issue
Sourceforge mirrors didn't get created properly so I'm unable to download, please re-upload or provide a mirror.
its normal when servers are overloaded.. try again later..
Was the TWRP removed again? I will be able to unlock my bootloader this night and don't know, if I can use TWRP, which was here before and the flashable Rom or if I should stick with the fastboot Rom for now
did it all in one!!! was a bit scared..hahahaha but everything works perfect!!!
adversario71 said:
did it all in one!!! was a bit scared..hahahaha but everything works perfect!!!
Click to expand...
Click to collapse
What you did?
ZainBilq said:
What you did?
Click to expand...
Click to collapse
just normal procedure..flash twrp..wipe data..then data,dalvik,cache..flash zip rom via otg..after flash wipe data again and thats it