[Q] HTC 1 Error install by CWM - One (M7) Q&A, Help & Troubleshooting

Hi
my phone information is
unlocked ship s-on
hboot 2.27.0000
os-2.25.1403.1
CID HTCCN704
MID PN0780000
CWM V6.0.37
no ROM installed yet only work hboot and cwm.
when i choice rom from sd show me this meg:
cant open /external_sd/pno7img_m7c_dtu_jb_50_s1_htccn_chs_cmcc_...................zip (bad)
tried install another one show me this msg
error in /external_sd 802t.zip (status 6)
any help please
i downloaded ROM from here http://forum.xda-developers.com/showthread.php?t=2617159
thank you

dlshad said:
Hi
my phone information is
cant open /external_sd/pno7img_m7c_dtu_jb_50_s1_htccn_chs_cmcc_...................zip (bad)
thank you
Click to expand...
Click to collapse
Sounds like a bad download, make sure MD5 is correct.

nkk71 said:
Sounds like a bad download, make sure MD5 is correct.
Click to expand...
Click to collapse
thank you for respond ..
what you mean about MD5 how can i check its correct or not ?

dlshad said:
thank you for respond ..
what you mean about MD5 how can i check its correct or not ?
Click to expand...
Click to collapse
Refer to nkk71 guide under ''Not so FAQ #1''

alray said:
Refer to nkk71 guide under ''Not so FAQ #1''
Click to expand...
Click to collapse
i read it but cant find htc 802t (T) verstion there

dlshad said:
i read it but cant find htc 802t (T) verstion there
Click to expand...
Click to collapse
the link I gave you is only to understand what is MD5, there is nothing explicitly for the 802t.
You can use winmd5 to check md5 value.

alray said:
Refer to nkk71 guide under ''Not so FAQ #1''
Click to expand...
Click to collapse
alray said:
the link a gave you is only to understand what is MD5, there is nothing explicitly for the 802t.
You can use winmd5 to check md5 value.
Click to expand...
Click to collapse
IC thanks dear

dlshad said:
IC thanks dear
Click to expand...
Click to collapse
to get the md5 value, go back to the webpage where you have downloaded the file. then use winmd5 to calculate md5 value of the downloaded file. The value must be same exact thing as that one on the download page.
i.e If I download arhd 53 rom from this page:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then I must check md5 of my downloaded file using WinMD5 and it must be DF9854F79C6E6928BEFD6EC43EC9F4A5
if not then its a bad download and the rom will not flash properly.
hope its clear for you

alray said:
the link I gave you is only to understand what is MD5, there is nothing explicitly for the 802t.
You can use winmd5 to check md5 value.
Click to expand...
Click to collapse
lol, maybe i should
guide here
the guide and just keep the FAQ section

nkk71 said:
lol, maybe i should
guide here
the guide and just keep the FAQ section
Click to expand...
Click to collapse
thank you i check it by free tools it was same MD5 its : 9898b157f9413d0d40b3b25ff0c42c73
So whats the problem then ?
i change sd and same problem
i heard about S-off should i make it S off or its different problem..any ideas please
thx

dlshad said:
thank you i check it by free tools it was same MD5 its : 9898b157f9413d0d40b3b25ff0c42c73
So whats the problem then ?
i change sd and same problem
i heard about S-off should i make it S off or its different problem..any ideas please
thx
Click to expand...
Click to collapse
what are you trying to flash? that thread you linked shows RUUs... ruu's are flashed in ruu mode:
in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip <name of file>.zip
fastboot flash zip <name of file>.zip <- yes TWICE!!
fastboot reboot-bootloader
though if you are S-On, then only an official signed package (same or higher version) will work, I don't know if those are signed or not.

nkk71 said:
what are you trying to flash? that thread you linked shows RUUs... ruu's are flashed in ruu mode:
in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip <name of file>.zip
fastboot flash zip <name of file>.zip <- yes TWICE!!
fastboot reboot-bootloader
though if you are S-On, then only an official signed package (same or higher version) will work, I don't know if those are signed or not.
Click to expand...
Click to collapse
im using teanwin recovery v2.6.3.4
tried CWM before samw msg

dlshad said:
im using teanwin recovery v2.6.3.4
tried CWM before samw msg
Click to expand...
Click to collapse
try opening the zip (both using windows explorer and WinRAR) and let me know the contents (screenshot).... if windows explorer is able to open it, then it's not a signed zip and won't work with S-On.

nkk71 said:
try opening the zip (both using windows explorer and WinRAR) and let me know the contents (screenshot).... if windows explorer is able to open it, then it's not a signed zip and won't work with S-On.
Click to expand...
Click to collapse
cant unzip by winrar
is that mean i should change security off to install this ROM? if yes how can i change it
thanks dear
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in recovery_signed.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in system.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in dzdata_32g.img. The file is corrupt

dlshad said:
cant unzip by winrar
is that mean i should change security off to install this ROM? if yes how can i change it
thanks dear
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: The archive is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in recovery_signed.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in system.img. The file is corrupt
! C:\Users\Admin\Downloads\Compressed\PN07IMG_M7C_DTU_JB_50_S1_HTCCN_CHS_CMCC_2.09.1403.1_Radio_1237.20.22.0520_release_320742.zip: CRC failed in dzdata_32g.img. The file is corrupt
Click to expand...
Click to collapse
ah then it seems it's a signed zip (since you said MD5 is correct), which you can flash with S-On... go for it, and copy/paste command prompt should you get an error.
remember the flash zip has to be done twice!!

Zip header checking
Failed (remote) 32 header error

dlshad said:
Zip header checking
Failed (remote) 32 header error
Click to expand...
Click to collapse
can you copy/paste the entire command prompt, even the fastboot oem rebootRUU etc...
for example:
Code:
C:\ADB3>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.047s]
finished. total time: 0.047s
C:\ADB3>fastboot flash zip ruu.zip
sending 'zip' (1033216 KB)...
OKAY [ 41.559s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 43.118s
etc...
cause that does sound like a corrupt zip, not a signed one ... can you give me the link to the exact one you're using, I'll try downloading it later.

http://d-h.st/l16 1.07G
and
http://d-h.st/1AZ 816mb
thanks Dear a lot

dlshad said:
http://d-h.st/l16 1.07G
and
http://d-h.st/1AZ 816mb
thanks Dear a lot
Click to expand...
Click to collapse
well you can forget the 2.09.1403.1 ruu, since you're already on "os-2.25.1403.1"... that would be a downgrade, so wouldn't work unless S-Off
and can you post a "fastboot getvar all" (excluding IMEI, MEID, and s/n).... i'll try downloading the 4.21.1403.31 version and see what that looks like... but it'll take a few hours at least, so nothing before tomorrow probably

nkk71 said:
well you can forget the 2.09.1403.1 ruu, since you're already on "os-2.25.1403.1"... that would be a downgrade, so wouldn't work unless S-Off
and can you post a "fastboot getvar all" (excluding IMEI, MEID, and s/n).... i'll try downloading the 4.21.1403.31 version and see what that looks like... but it'll take a few hours at least, so nothing before tomorrow probably
Click to expand...
Click to collapse

Related

help please !!

i posted this thread in the Development section
http://forum.xda-developers.com/showthread.php?t=1315953
I need some help and suggestions regarding this thread
Thanks in advance
santhoshpirate said:
i posted this thread in the Development section
http://forum.xda-developers.com/showthread.php?t=1315953
I need some help and suggestions regarding this thread
Thanks in advance
Click to expand...
Click to collapse
OK I found this thread yesterday for creating a goldcard using adb commands. Maybe it can help you get the goldcard created. In looking at your getvar values, you have the right RUU/ROM that you are attempting to flash.
http://forum.xda-developers.com/showpost.php?p=18748766&postcount=6
The only other thing that was mentioned in that thread was did you follow the instructions completely.
Here are the series of commands you need to try:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip [path to ROM.zip]
fastboot reboot
i tried but im unable to hav a gold card and flash through RUU also didnt work
santhoshpirate said:
i tried but im unable to hav a gold card and flash through RUU also didnt work
Click to expand...
Click to collapse
What happen when you tried that method to create the goldcard?
What messages did you get trying to Fastboot flash the ROM.zip?
You keep asking for help but you are not giving us a lot of information to work with.
tpbklake said:
What happen when you tried that method to create the goldcard?
What messages did you get trying to Fastboot flash the ROM.zip?
You keep asking for help but you are not giving us a lot of information to work with.
Click to expand...
Click to collapse
Ya,so true...keep seeing his post,we need more information to be able to help..
Sent from my HTC Incredible S using Tapatalk
tpbklake said:
What happen when you tried that method to create the goldcard?
What messages did you get trying to Fastboot flash the ROM.zip?
You keep asking for help but you are not giving us a lot of information to work with.
Click to expand...
Click to collapse
Im unable to boot my phone to install goldcard helper to create the goldcard
C:\Users\Sumo the Rider>fastboot flash zip C:\PG32IMG.zip
sending 'zip' (261186 KB)... OKAY [ 44.011s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 91.077s
I get the above info when i try to flash the zip using FASTBOOT
tpbklake said:
OK I found this thread yesterday for creating a goldcard using adb commands. Maybe it can help you get the goldcard created. In looking at your getvar values, you have the right RUU/ROM that you are attempting to flash.
http://forum.xda-developers.com/showpost.php?p=18748766&postcount=6
The only other thing that was mentioned in that thread was did you follow the instructions completely.
Here are the series of commands you need to try:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip [path to ROM.zip]
fastboot reboot
Click to expand...
Click to collapse
santhoshpirate said:
Im unable to boot my phone to install goldcard helper to create the goldcard
C:\Users\Sumo the Rider>fastboot flash zip C:\PG32IMG.zip
sending 'zip' (261186 KB)... OKAY [ 44.011s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 91.077s
I get the above info when i try to flash the zip using FASTBOOT
Click to expand...
Click to collapse
Check out the thread post above ^^^^^^^. attn1 has a goldcard app and script that can be run using adb commands. You don't have to use the Goldcard Helper app. Just boot your phone into bootloader mode and then you should be able to run the script from a cmd window on your PC.
tpbklake said:
Check out the thread post above ^^^^^^^. attn1 has a goldcard app and script that can be run using adb commands. You don't have to use the Goldcard Helper app. Just boot your phone into bootloader mode and then you should be able to run the script from a cmd window on your PC.
Click to expand...
Click to collapse
=.=, true, he totally ignore what you said, continue to do what he want and complaint that he unable to proceed....
Try the method attn1 provided, it should be able to help you create gold card without using gold card helper.
Hi guys thnx for all the help
My phone is now working and s-on
Really thnx!
Sry for responding late i had exams!
I apologize to you guys for not giving you the correct info about my process, because im a learner!

Have S-Off but no Root

Incredible S, I have S-Off but no Root?
Hi, I have an Incredible S it had HBOOT 2.00, but i used XTC Clip to gain S-Off, it appears to have worked luckily, as it now says:
VIVO PVT SHIP S-OFF RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011,20:33:03
So what do i do now to gain Root?
Any help would be appreciated, thanks.
Regards,
S
Scythefx said:
Incredible S, I have S-Off but no Root?
Hi, I have an Incredible S it had HBOOT 2.00, but i used XTC Clip to gain S-Off, it appears to have worked luckily, as it now says:
VIVO PVT SHIP S-OFF RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011,20:33:03
So what do i do now to gain Root?
Any help would be appreciated, thanks.
Regards,
S
Click to expand...
Click to collapse
Have you installed adb and fastboot on you Pc?
If yes, boot into fastboot usb, copy the attached file to the fastboot folder
open cmd in the folder with the adb and fastboot driver and write
fastboot flash recovery recovery-clockwork-5.0.2.0-vivo.img
boot than again into bootloader and select recovery
than toggle usb mount, copy this file downloads.androidsu.com/superuser/su-3.0-efgh-signed.zip to you sd card
than disconnect, install zip from sd card and select the superuser zip file.
after that reboot and you're rooted
There would be enough tutorials, but today i'm really "nice"... unbelieveable.
Thanks for your help, and the files, i will try that tonight.
I had just started reading the tutorials and looking at apps like Gingerbreak etc, would have taken me a while to figure out the best option, so much appreciated, thanks again.
Regards,
S
Scythefx said:
Thanks for your help, and the files, i will try that tonight.
I had just started reading the tutorials and looking at apps like Gingerbreak etc, would have taken me a while to figure out the best option, so much appreciated, thanks again.
Regards,
S
Click to expand...
Click to collapse
Gingerbreak is ****ty
Sent from my Incredible S using xda premium
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Scythefx said:
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Click to expand...
Click to collapse
No, you should not need ENG S-OFF to flash a custom recovery. If you are using a Windows PC, besides the adb.exe and fastboot.exe have you installed the HTC drivers?
Yes i installed them all including the HTC Sync and then uninstalled HTC Sync as suggested, perhaps it did not leave the drivers when i did that, I will look into it.
Thanks, i was not sure if i needed ENG S-OFF.
S
Scythefx said:
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Click to expand...
Click to collapse
Could you cut and paste the whole command window so we can see the Fastboot command you typed as well as the error response you get.
Scythefx said:
Hi, i am having some problems, it says
sending 'recovery' (3726 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
It is SHIP S-OFF RL does it need engineer ENG S-OFF, if so how do i do that?
Thanks,
S
Click to expand...
Click to collapse
On second thought, the reason the fastboot flash recovery command is failing is that even though you have S-OFF, the HBOOT is locked and some of the fastboot commands are disabled, thus the "remote: not allowed" message.
I have attached a PG32IMG.zip file that you can copy to your SD card (copy the file and rename it PG32IMG.zip) and then boot into HBOOT and it will flash CWM recovery from the zip file.
Then you can boot into CWM recovery and flash the su-3.0 zip file to gain root.
Hi here is the pic on my cmd.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uploaded with ImageShack.us
thanks
Thanks tpbklake i will try that.
Scythefx said:
Hi here is the pic on my cmd.
Uploaded with ImageShack.us
thanks
Click to expand...
Click to collapse
OK, thanks. Give the attached PG32IMG.zip file in my other post a shot. That should work and get CWM installed and then you can flash su-3.0.zip in recovery mode.
Unfortunately the file you attached is only 1kb when downloaded, even though it says 3.6mb? next to it, could you check it, i have tried a few times, thanks for your help.
S
Scythefx said:
Unfortunately the file you attached is only 1kb when downloaded, even though it says 3.6mb? next to it, could you check it, i have tried a few times, thanks for your help.
S
Click to expand...
Click to collapse
Sorry about that. Please try it again.
Thanks again, i believe it worked, so i deleted the PG32IMG and have now copied su-3.0-efgh-signed to the sd card.
Now in HBOOT it has
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
HBOOT USB
IMAGE CRC
how do i go about running the 'su-3.0-efgh-signed.zip' do i do it from here?
S
Scythefx said:
Thanks again, i believe it worked, so i deleted the PG32IMG and have now copied su-3.0-efgh-signed to the sd card.
Now in HBOOT it has
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
HBOOT USB
IMAGE CRC
how do i go about running the 'su-3.0-efgh-signed.zip' do i do it from here?
S
Click to expand...
Click to collapse
Going back to the instructions listed above, select RECOVERY and that should put you in ClockworkMod Recovery. Use the Volume Up Down keys to select a menu item and push the Power button to select it.
First I would make a backup by selecting the 'backup and restore' menu.
Next you would choose the 'install zip from SDcard' and then 'choose zip file from SDcard' Select the SU-3.0....zip file
Then select the 'reboot system now'
Unfortunately i already did it, so did not get to backup , everything seems to have gone well, but now titanium backup and superuser do not seem to work, says no root access still, titanium said something about busybox?
Strange as everything seem to go well after your help.
S
Scythefx said:
Unfortunately i already did it, so did not get to backup , everything seems to have gone well, but now titanium backup and superuser do not seem to work, says no root access still, titanium said something about busybox?
Strange as everything seem to go well after your help.
S
Click to expand...
Click to collapse
What does the Superuser app do when you try to launch it?
It comes up with a white screen with apps and logs listed at the top under the superuser logo, the logs have a couple of items listed that were denied, like lucky patcher and titanium.
Scythefx said:
It comes up with a white screen with apps and logs listed at the top under the superuser logo, the logs have a couple of items listed that were denied, like lucky patcher and titanium.
Click to expand...
Click to collapse
Do you have Terminal Emulator app? You could dowload that and then run it. On the terminal screen then type the command 'su' and hit the Return key. You should get a prompt from the Superuser app to allow and then the prompt in the terminal window should change to a #.

[SOLVED] Require Help getting another HTC One M7 back to stock....

I have another M7 I need to return to stock but I am really struggling.
My CID is CID_02_001, I am S Off, HBOOT Version 1.54, can't find the correct RUU and not sure which Nandroid backup to use, can someone please assist?
Oh tried used Supercid but just having issues with Fastboot/ADB, damn Windows 8.1!
simmo0020 said:
I have another M7 I need to return to stock but I am really struggling.
My CID is CID_02_001, I am S Off, HBOOT Version 1.54, can't find the correct RUU and not sure which Nandroid backup to use, can someone please assist?
Oh tried used Supercid but just having issues with Fastboot/ADB, damn Windows 8.1!
Click to expand...
Click to collapse
You might try this RUU from crushalot. It should be the correct one.
Thannks, I will give it a go.
majmoz said:
You might try this RUU from crushalot. It should be the correct one.
Click to expand...
Click to collapse
That is an EXE file which when I use comes up with a USB 170 Error (W8.1), so I need as new option in LINUX (UBUNTU), what is the best option from here?
simmo0020 said:
That is an EXE file which when I use comes up with a USB 170 Error (W8.1), so I need as new option in LINUX (UBUNTU), what is the best option from here?
Click to expand...
Click to collapse
Just getting the USB 170 Error again, please someone help.....
Just wondering , why u wana flash back to stock?....
simmo0020 said:
Just getting the USB 170 Error again, please someone help.....
Click to expand...
Click to collapse
if you need to get my attention just use the mention system, using @ nkk71 <-without the space (eg @simmo0020 )
anyway, once you've started the RUU.EXE, it will have created a temporary directory in %TEMP%, and within that folder you will find a 1GB+ file called ROM.ZIP <- this is the full ruu.zip which you can flash using linux
Do you intend on going S-ON??
litlnicky said:
Just wondering , why u wana flash back to stock?....
Click to expand...
Click to collapse
Recycling to Enviophone
nkk71 said:
if you need to get my attention just use the mention system, using @ nkk71 <-without the space (eg @simmo0020 )
anyway, once you've started the RUU.EXE, it will have created a temporary directory in %TEMP%, and within that folder you will find a 1GB+ file called ROM.ZIP <- this is the full ruu.zip which you can flash using linux
Do you intend on going S-ON??
Click to expand...
Click to collapse
Where do I find %TEMP%, yes will go S-ON at the very end.
simmo0020 said:
Recycling to Enviophone[/QUO bro cant you just flash latest sense rom?, just wipe data /factory reset and send to them ? beats having to mess around trying to get back to stock recovery and stuff loll
Click to expand...
Click to collapse
litlnicky said:
simmo0020 said:
Recycling to Enviophone[/QUO bro cant you just flash latest sense rom?, just wipe data /factory reset and send to them ? beats having to mess around trying to get back to stock recovery and stuff loll
Click to expand...
Click to collapse
Still flashes up that it is a test device and prompts you to install SuperSU, not sure how to get rid of that
Click to expand...
Click to collapse
simmo0020 said:
litlnicky said:
Still flashes up that it is a test device and prompts you to install SuperSU, not sure how to get rid of that
Click to expand...
Click to collapse
so install superuser from playstore or wteva , then remove ur gmaill account n stuff , and send it them, put app in a folder loll? i take it your selling for money yeh?
Click to expand...
Click to collapse
litlnicky said:
simmo0020 said:
so install superuser from playstore or wteva , then remove ur gmaill account n stuff , and send it them, put app in a folder loll? i take it your selling for money yeh?
Click to expand...
Click to collapse
Yes mate £135
Click to expand...
Click to collapse
simmo0020 said:
Where do I find %TEMP%
Click to expand...
Click to collapse
After starting the RUU.EXE, when it's on the first screen, in Windows Explorer type %TEMP% in the location box:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that will jump you to the folder, sort by date modified, and find the newest folder within that, it's going to have a weird long alpha numeric name, and within that you'll find plenty of files, but 1 very large file called ROM.ZIP, that's the one you want.
simmo0020 said:
yes will go S-ON at the very end.
Click to expand...
Click to collapse
I never recommend going from s-off to s-on on anything above hboot 1.54.... you can follow my guide using cwm restore method (it is longer, and will not work on Win8.1)
those would be the files you need (assuming you have MID=PN0710000, CID=O2___001: http://forum.xda-developers.com/showpost.php?p=54857652&postcount=1068
your choice, good luck
simmo0020 said:
litlnicky said:
Yes mate £135
Click to expand...
Click to collapse
gud luk man,, if u wer in leeds uk, id buy it off ya loll,
Click to expand...
Click to collapse
nkk71 said:
After starting the RUU.EXE, when it's on the first screen, in Windows Explorer type %TEMP% in the location box:
that will jump you to the folder, sort by date modified, and find the newest folder within that, it's going to have a weird long alpha numeric name, and within that you'll find plenty of files, but 1 very large file called ROM.ZIP, that's the one you want.
I never recommend going from s-off to s-on on anything above hboot 1.54.... you can follow my guide using cwm restore method (it is longer, and will not work on Win8.1)
those would be the files you need (assuming you have MID=PN0710000, CID=O2___001: http://forum.xda-developers.com/showpost.php?p=54857652&postcount=1068
your choice, good luck
Click to expand...
Click to collapse
I got a data.cab file which is around 1.6GB, can't find any named ROM.ZIP
nkk71 said:
After starting the RUU.EXE, when it's on the first screen, in Windows Explorer type %TEMP% in the location box:
that will jump you to the folder, sort by date modified, and find the newest folder within that, it's going to have a weird long alpha numeric name, and within that you'll find plenty of files, but 1 very large file called ROM.ZIP, that's the one you want.
I never recommend going from s-off to s-on on anything above hboot 1.54.... you can follow my guide using cwm restore method (it is longer, and will not work on Win8.1)
those would be the files you need (assuming you have MID=PN0710000, CID=O2___001: http://forum.xda-developers.com/showpost.php?p=54857652&postcount=1068
your choice, good luck
Click to expand...
Click to collapse
FOUND IT
@nkk71
[email protected]:~$ fastboot devices
no permissions fastboot
[email protected]:~$
I forgot the sudo, sorry new to LINUX
simmo0020 said:
@nkk71
[email protected]:~$ fastboot devices
no permissions fastboot
[email protected]:~$
I forgot the sudo, sorry new to LINUX
Click to expand...
Click to collapse
yep, it's "sudo fastboot ...."
also unix is case sensitive so there's a difference between "ROM.zip" and "rom.zip"
@nkk71 I'm stuck again
[email protected]:~$ sudo fastboot devices
FA364W910897 fastboot
[email protected]:~$ sudo fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.047s]
finished. total time: 0.047s
[email protected]:~$ sudo fastboot flash zip ruu.zip
< waiting for device >
error: cannot load 'ruu.zip': No such file or directory
[email protected]:~$ sudo fastboot flash zip ruu.zip
error: cannot load 'ruu.zip': No such file or directory

[Q] Can't Boot Up Stock ROM. Stuck

*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
M_PUT SHIP S-ON RH
HBOOT-1.57.0000
OpenDSP-v32.120.274.0909
OS-5.502.2
eMMC-bot 2048MB
Apr 22 2014, 01:10:58.0
HTC One (M7) AT&T
^^^^^^^^^^^^^^^^^^^^^^^^^^
Above is my information on my phone when booting up into the fastboot, recovery, factory reset, etc menu
I don't have an OS as well
Now the problem I have here is that I can't load my stock ROM when rebooting. I already loaded up a ZIP file of the specific stock ROM that I'm suppose to be on but nothing happens when on command prompt!
This is what happens:
>fastboot flash zip Guru_Reset_M7_5.12.502.2_clsA.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1245080 KB)...
OKAY [ 57.277s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 180.581s
Very frustrating especially with the fact that there isn't a EXE file version so I can't go and try that way either. Running out of options. Hoping somebody here to diagnosis this situation
AndroidHTC2013 said:
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
M_PUT SHIP S-ON RH
HBOOT-1.57.0000
OpenDSP-v32.120.274.0909
OS-5.502.2
eMMC-bot 2048MB
Apr 22 2014, 01:10:58.0
HTC One (M7) AT&T
^^^^^^^^^^^^^^^^^^^^^^^^^^
Above is my information on my phone when booting up into the fastboot, recovery, factory reset, etc menu
I don't have an OS as well
Now the problem I have here is that I can't load my stock ROM when rebooting. I already loaded up a ZIP file of the specific stock ROM that I'm suppose to be on but nothing happens when on command prompt!
This is what happens:
>fastboot flash zip Guru_Reset_M7_5.12.502.2_clsA.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1245080 KB)...
OKAY [ 57.277s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 180.581s
Very frustrating especially with the fact that there isn't a EXE file version so I can't go and try that way either. Running out of options. Hoping somebody here to diagnosis this situation
Click to expand...
Click to collapse
The Guru Reset your trying to flash is flashed in custom recovery
Unlock the bootloader first then
Flash TWRP 2.6.3.3 >> http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
now boot to recovery and push the Guru reset to the phone
adb push rom.zip /sdcard/
just put the rom in the same folder as adb and fastboot and rename it rom.zip
the last step is to install the rom in TWRP / Install
During the install you can choose to keep the custom recovery you have now or return to stock recovery so you can recieve OTA updates again .. that's up to you
clsA said:
now boot to recovery and push the Guru reset to the phone
adb push rom.zip /sdcard/
just put the rom in the same folder as adb and fastboot and rename it rom.zip
the last step is to install the rom in TWRP / Install
Click to expand...
Click to collapse
Okay up until this point everything was going great except when I typed "adb push rom.zip /sdcard/" (I copied and pasted what you wrote) into the command prompt and this message appeared:
>adb push rom.zip /sdcard/
cannot stat 'rom.zip': No such file or directory
Now what did I do wrong? I renamed the file as rom.zip just like you said and I placed it in the same folder as adb and fastboot. Was I suppose to go to a specific part of TWRP recovery? ADB sideload? I already tried ADB sideload but nothing happened....
AndroidHTC2013 said:
Okay up until this point everything was going great except when I typed "adb push rom.zip /sdcard/" (I copied and pasted what you wrote) into the command prompt and this message appeared:
>adb push rom.zip /sdcard/
cannot stat 'rom.zip': No such file or directory
Now what did I do wrong? I renamed the file as rom.zip just like you said and I placed it in the same folder as adb and fastboot.
Click to expand...
Click to collapse
if your using windows you probably renamed it rom.zip.zip
in the command window type adb push then leave a space and drag the rom.zip to the window now finish the command with a space then /sdcard/
clsA said:
if your using windows you probably renamed it rom.zip.zip
in the command window type adb push then leave a space and drag the rom.zip to the window now finish the command with a space then /sdcard/
Click to expand...
Click to collapse
I don't understand this part; do you mean to actually drag and drop the rom.zip to command prompt? It didn't work
Sorry if I'm making this more harder than it should be, and yes I'm using Windows as my operating system
AndroidHTC2013 said:
I don't understand this part; do you mean to actually drag and drop the rom.zip to command prompt? It didn't work
Sorry if I'm making this more harder than it should be, and yes I'm using Windows as my operating system
Click to expand...
Click to collapse
in the command window type dir and hit enter ... now whats the name of your rom.zip
clsA said:
in the command window type dir and hit enter ... now whats the name of your rom.zip
Click to expand...
Click to collapse
Okay so I left the ZIP file as "rom" and then I re-did the whole process again. After that I finally got that GURU Reset file in the SD card. But when trying to install it it just gave me an error message! I'm assuming that it wasn't compatible with my software even though it match specifically with mines. Do you think I may have gotten the wrong software even though it's HTC One (M7) Sense 6 5.502.2(which was the last stock rom I got before rooting) ? Is there even a version released in the US specifically?
AndroidHTC2013 said:
Okay so I left the ZIP file as "rom" and then I re-did the whole process again. After that I finally got that GURU Reset file in the SD card. But when trying to install it it just gave me an error message! I'm assuming that it wasn't compatible with my software even though it match specifically with mines. Do you think I may have gotten the wrong software even though it's HTC One (M7) Sense 6 5.502.2(which was the last stock rom I got before rooting) ? Is there even a version released in the US specifically?
Click to expand...
Click to collapse
what error message ? did aroma start or did TWRP give the error ?
did you md5 check your download ?
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
MD5: 3b4013265e9134bc6916cf3c5fd14406
clsA said:
what error message ? did aroma start or did TWRP give the error ?
did you md5 check your download ?
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
MD5: 3b4013265e9134bc6916cf3c5fd14406
Click to expand...
Click to collapse
TWRP gave me the message. No I didn't let MD5 check my download... am I suppose to?
AndroidHTC2013 said:
TWRP gave me the message. No I didn't let MD5 check my download... am I suppose to?
Click to expand...
Click to collapse
Please check your downloads
clsA said:
Please check your downloads
Click to expand...
Click to collapse
I just tried intalling MD5 on TWRP and it said:
Updating partition details...
Error flashing zip '/sdcard/md5.zip'
Failed
WHAT?
AndroidHTC2013 said:
I just tried intalling MD5 on TWRP and it said:
Updating partition details...
Error flashing zip '/sdcard/md5.zip'
Failed
WHAT?
Click to expand...
Click to collapse
Wow ... it a pc app just unzip it to your desktop
clsA said:
Wow ... it a pc app just unzip it to your desktop
Click to expand...
Click to collapse
It said that they don't match... Now what?
AndroidHTC2013 said:
It said that they don't match... Now what?
Click to expand...
Click to collapse
re-download it, you can't flash it if it's corrupt
clsA said:
re-download it, you can't flash it if it's corrupt
Click to expand...
Click to collapse
That link for the GURU Reset you gave me didn't work. I re-downloaded it again but still the same result
Is there any other places where I can redownload HTC One M7 Sense 6 AT&T version
AndroidHTC2013 said:
That link for the GURU Reset you gave me didn't work. I re-downloaded it again but still the same result
Is there any other places where I can redownload HTC One M7 Sense 6 AT&T version
Click to expand...
Click to collapse
What ??
Their are 9 mirrors on that link
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
clsA said:
What ??
Their are 9 mirrors on that link
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
Click to expand...
Click to collapse
I tried all of them. Not one matched! I think something occurred between the day that they were put out and now that caused this to happen...
Want proof? I 've attached a screenshot of what I've been getting. This occurred over the nine different places that the ROM was from
Is there any chance of a EXE file version of this? Or any other places for a complete ZIP file? Oh and just to let you know the website said 1.2 GB, but the actual downloaded file had only 1.18 GB, not sure if this helps or not, just to let you know
AndroidHTC2013 said:
I tried all of them. Not one matched! I think something occurred between the day that they were put out and now that caused this to happen...
Want proof? I 've attached a screenshot of what I've been getting. This occurred over the nine different places that the ROM was from
Is there any chance of a EXE file version of this? Or any other places for a complete ZIP file? Oh and just to let you know the website said 1.2 GB, but the actual downloaded file had only 1.18 GB, not sure if this helps or not, just to let you know
Click to expand...
Click to collapse
man your are something else
try using the actual MD5 in the box that says Paste next to it
3b4013265e9134bc6916cf3c5fd14406
did you actually think the MD5 was 5.502.2 ?????
@Danny201281 ...please help before i shoot myself
clsA said:
man your are something else
try using the actual MD5 in the box that says Paste next to it
3b4013265e9134bc6916cf3c5fd14406
did you actually think the MD5 was 5.502.2 ?????
@Danny201281 ...please help before i shoot myself
Click to expand...
Click to collapse
No actually that was my computer that automatically set it. And, I'm still stuck at the TWRP installation again but this time it says:
Updating partition details...
E: Unable to mount '/cache'
E: Unable to mount '/cache'
E: Unable to mount '/cache'
Sorry I'm losing your patience here, if it helps I'll donate, because I'm getting help at least! I WILL DONATE
AndroidHTC2013 said:
No actually that was my computer that automatically set it. And, I'm still stuck at the TWRP installation again but this time it says:
Updating partition details...
E: Unable to mount '/cache'
E: Unable to mount '/cache'
E: Unable to mount '/cache'
Sorry I'm losing your patience here, if it helps I'll donate, because I'm getting help at least! I WILL DONATE
Click to expand...
Click to collapse
LOL sorry man it's fine, I just expect a lot from those i'm helping.
the cache error is meaningless you erased the cache so you get the error ...it has nothing to do with flashing the guru reset
what happens when you go to install the rom (post a picture if possible)

Need help to go from Cyanogenmod to Stock, bootloop

Hello, i bought this phone used a few years ago and it had cyanogen mod, it was working fine till about a year ago where i stopped using it for like half a year. Then borrowed it to a parent and when they started using it started malfunctioning, there was problem installing apps i think and then it just got stuck on boot saying "optimizing apps xx of 96" and it would stay like that nonstoop and it became VERY HOT. I wiped it but it gave me error when trying to install apps, and then it got stuck on boot again just like before. I did a recovery and it lets me boot now but i don't wanna risk it doing the same again so i just want to have it back to 100% stock.
Now i'm kinda a noob at this, but i do know quite a lot a bout PCs so it shouldn't be much of a problem.
I saw a guide by @alray which seemed easy enough:
"Quote:
Originally posted by @alray
HTC ONE M7_U/M7_UL - ADB PUSH & FLASH A ROM - DETAILED INSTRUCTIONS
Quote:
Prerequisites:
You need ADB and FASTBOOT on your computer,
either by installing the Android SDK or Minimal ADB and FASTBOOT
You need to know how to start a fastboot/adb command prompt:
You need TWRP recovery on your device.
We still recommend to use version 2.6.3.3 for all roms
except if another version is specified in the rom OP.
Use 2.7.1.1+ for roms that require "block:by-name" support (CM11)
You need your HTC drivers correctly installed on your PC:
Quote:
Procedure:
Make sure the ROM you want to flash is in the same folder where ADB and FASTBOOT are.
(C:\adt-bundle-windows-x86_64-<DATE>\sdk\platform-tools or C:\Program Files (x86)\Minimal ADB and Fastboot)
Connect your phone to computer using usb cable
Reboot phone in recovery mode (TWRP):
Make sure your phone is booted in TWRP main menu:
transfer the rom to your /sdcard folder:
Code:
adb push name_of_rom.zip /sdcard/
In TWRP main menu, select ''INSTALL''
Browse the installation menu and select your rom zip file inside /sdcard folder:
Swipe to confirm you want to flash the rom
Reboot phone"
But i can't find my exact phone model thus i don't know which ROM to get and where to get it.
Phone model is PN07110 (says at the back), when i go into the "about" tab on OS it just says "HTC ONE" on model. Done an Imei check and it says Customer: MOBILE DISTRIBUTION GROUP, INC. Country: US. How can i find the exact model and room for it?
Also i've checked at is S-on
Thanks in advance guys!
NickTheConqueror said:
Hello, i bought this phone used a few years ago and it had cyanogen mod, it was working fine till about a year ago where i stopped using it for like half a year. Then borrowed it to a parent and when they started using it started malfunctioning, there was problem installing apps i think and then it just got stuck on boot saying "optimizing apps xx of 96" and it would stay like that nonstoop and it became VERY HOT. I wiped it but it gave me error when trying to install apps, and then it got stuck on boot again just like before. I did a recovery and it lets me boot now but i don't wanna risk it doing the same again so i just want to have it back to 100% stock.
Now i'm kinda a noob at this, but i do know quite a lot a bout PCs so it shouldn't be much of a problem.
But i can't find my exact phone model thus i don't know which ROM to get and where to get it.
Phone model is PN07110 (says at the back), when i go into the "about" tab on OS it just says "HTC ONE" on model. Done an Imei check and it says Customer: MOBILE DISTRIBUTION GROUP, INC. Country: US. How can i find the exact model and room for it?
Also i've checked at is S-on
Thanks in advance guys!
Click to expand...
Click to collapse
To know your phone info, you'll need to use the "fastboot getvar all" command:
Install Minimal adb and fastboot on your computer and the latest htc drivers (you can install the latest drivers by installing htc sync manager from htc's website).
Once adb and the drivers are installed, connect your phone to your pc, reboot the phone in bootloader mode (hold power + volume down button until you see a white screen like this). Make sure your phone is in bootloader mode (like on the right picture, showing "FASTBOOT USB" in red. If it's bootloader mode (HBOOT in blue) use you volume up/down key to highlight the FASTBOOT option and use the power button to enter fastboot menu.
Then on your computer click the start menu ---> program ---> minimal adb and fastboot ---> minimal adb and fastboot.exe.
This will open a command window. Type "fastboot getvar all" without the quotes, hit Enter and copy paste (or screenshot) the output in your next post. Make sure to delete the IMEI and SERIALNO lines before posting.
alray said:
To know your phone info, you'll need to use the "fastboot getvar all" command:
Install Minimal adb and fastboot on your computer and the latest htc drivers (you can install the latest drivers by installing htc sync manager from htc's website).
Once adb and the drivers are installed, connect your phone to your pc, reboot the phone in bootloader mode (hold power + volume down button until you see a white screen like this). Make sure your phone is in bootloader mode (like on the right picture, showing "FASTBOOT USB" in red. If it's bootloader mode (HBOOT in blue) use you volume up/down key to highlight the FASTBOOT option and use the power button to enter fastboot menu.
Then on your computer click the start menu ---> program ---> minimal adb and fastboot ---> minimal adb and fastboot.exe.
This will open a command window. Type "fastboot getvar all" without the quotes, hit Enter and copy paste (or screenshot) the output in your next post. Make sure to delete the IMEI and SERIALNO lines before posting.
Click to expand...
Click to collapse
Done, thanks for the help man.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NickTheConqueror said:
Done, thanks for the help man.
Click to expand...
Click to collapse
The latest RUU version for your phone is 6.15.599.101
Download these 2 files and save them in the same folder where is installed minimal adb and fastboot on your computer
https://androidfilehost.com/?fid=24052804347843559
https://androidfilehost.com/?fid=24341993505161791
Reboot your phone in bootloader (fastboot usb) menu and lunch minimal adb and fastboot.exe
In the terminal window type (commands are case sensitive):
Code:
fastboot oem rebootRUU
Your phone will reboot in RUU mode, a black screen with a silver HTC logo
Then flash the RUU with this command:
Code:
htc_fastboot flash zip PN07IMG_M7_U_K443_SENSE60_MR_HTC_LA_SPA_6.15.599.101_Radio_4T.28.3218.04_10.33E.1718.01D_release_388532_signed.zip
The flash will begin and the first part of the RUU will be flashed. After a few seconds, your phone will reboot to ruu mode (you'll get generic error message in your terminal window saying: "Failed remote: 90 Hboot pre-update! Please flush image again immediately" don't worry that's normal) and flash the second part of the RUU (should take about 10 minutes).
Once the flash is done you should see in your terminal window the message:
Code:
Successful
OKAY
Finished. Total time: XXX seconds
(The green progress bar on your phone screen might not show exactly 100% that's normal.)
If yes it's now safe to reboot your phone using this command:
Code:
fastboot reboot
Then wait for your phone to boot (first boot after flashing a RUU can take longer than usual)
If something goes wrong during the ruu flash do not reboot your phone. Rebooting the phone during an incomplete ruu flash can brick it. Make sure to have your battery fully charged before proceeding. If your bootloader is unlocked (bootloader lock/unlock status is shown in pink when in bootloader mode) you must re-lock it before flashing the RUU using the
Code:
fastboot oem lock
command.
alray said:
The latest RUU version for your phone is 6.15.599.101
Click to expand...
Click to collapse
Hey, the first file (the big one) gives me errors when i try to extract it to the folder, says the files are corrupt, i've already downloaded it twice.
NickTheConqueror said:
Hey, the first file (the big one) gives me errors when i try to extract it to the folder, says the files are corrupt, i've already downloaded it twice.
Click to expand...
Click to collapse
The file is encrypted that's why. You don't need to extract it.
alray said:
The file is encrypted that's why. You don't need to extract it.
Click to expand...
Click to collapse
Ok, i've put the rar and the other file in the Minimal ADB folder like you told me, opened Minimal ADB and put the code you said but it apparently failed. Also, some of the instructions are not very clear, this part ""Failed remote: 90 Hboot pre-update! Please flush image again immediately" don't worry that's normal) and flash the second part of the RUU (should take about 10 minutes). " How do i flash the second part?, do i input the same code again or is it automatically done?. My phone is now with a black screen and the silver HTC logo. What should i do now?, my phone is still conected to the USB and i haven't closed the bat file.
Here's the info on the bat.
BTW: on the bat it says the file is a zip apparently, but in my computer it shows as a rar file, i don't have winzip, just winrar. Could that be the problem?
UPDATE: I've input the same code again and it didn't work. The bat just updated with the same exact text as before.
New text :
C:\Program Files (x86)\Minimal ADB and Fastboot>htc_fastboot flash zip PN07IMG_M7_U_K443_SENSE60_MR_HTC_LA_SPA_6.15.599.101_Radio_4T.28.3218.04_10.33E.1718.01D_release_388532_signed.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 6.15.599.101
found large-zip header, file count: 5
processing file 1/5...
sending 'zip' (42551 KB)...
OKAY [ 2.676s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 8.913s
htc_fastboot finished. total time: 9.441s
C:\Program Files (x86)\Minimal ADB and Fastboot>
Just as before.
NickTheConqueror said:
Ok, i've put the rar and the other file in the Minimal ADB folder like you told me, opened Minimal ADB and put the code you said but it apparently failed. Also, some of the instructions are not very clear, this part ""Failed remote: 90 Hboot pre-update! Please flush image again immediately" don't worry that's normal) and flash the second part of the RUU (should take about 10 minutes). " How do i flash the second part?, do i input the same code again or is it automatically done?. My phone is now with a black screen and the silver HTC logo. What should i do now?, my phone is still conected to the USB and i haven't closed the bat file.
Here's the info on the bat.
BTW: on the bat it says the file is a zip apparently, but in my computer it shows as a rar file, i don't have winzip, just winrar. Could that be the problem?
UPDATE: I've input the same code again and it didn't work. The bat just updated with the same exact text as before.
New text :
C:\Program Files (x86)\Minimal ADB and Fastboot>htc_fastboot flash zip PN07IMG_M7_U_K443_SENSE60_MR_HTC_LA_SPA_6.15.599.101_Radio_4T.28.3218.04_10.33E.1718.01D_release_388532_signed.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 6.15.599.101
found large-zip header, file count: 5
processing file 1/5...
sending 'zip' (42551 KB)...
OKAY [ 2.676s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 8.913s
htc_fastboot finished. total time: 9.441s
C:\Program Files (x86)\Minimal ADB and Fastboot>
Just as before.
Click to expand...
Click to collapse
is your bootloader still unlocked?
alray said:
is your bootloader still unlocked?
Click to expand...
Click to collapse
No idea. What should i do now?
NickTheConqueror said:
No idea. What should i do now?
Click to expand...
Click to collapse
Go back in bootloader mode and check if your bootloader is unlocked or locked (first line of text in pink). If its unlocked use this command to re-lock:
fastboot oem lock
Then try again
alray said:
Go back in bootloader mode and check if your bootloader is unlocked or locked (first line of text in pink). If its unlocked use this command to re-lock:
fastboot oem lock
Then try again
Click to expand...
Click to collapse
Ok, but how do i leave out of the black screen with the silver logo?, is it safe to just power it down?
NickTheConqueror said:
Ok, but how do i leave out of the black screen with the silver logo?, is it safe to just power it down?
Click to expand...
Click to collapse
You can leave ruu mode typing
fastboot reboot-bootloader
Or using power + volume down.
Yes safe to reboot, nothing flashed yet
alray said:
You can leave ruu mode typing
fastboot reboot-bootloader
Or using power + volume down.
Yes safe to reboot, nothing flashed yet
Click to expand...
Click to collapse
Ok, did it. Now it says "Relocked" "Security Warning" in pink, is it ok now?, do i do the same as before?. Also for the second part of the flash do i have to input the same code again or what?
NickTheConqueror said:
Ok, did it. Now it says "Relocked" "Security Warning" in pink, is it ok now?, do i do the same as before?. Also for the second part of the flash do i have to input the same code again or what?
Click to expand...
Click to collapse
That's fine now go back in ruu mode using
Code:
fastboot oem rebootRUU
and once there proceed with
Code:
htc_fastboot flash zip PN07IMG_M7_U_K443_SENSE60_MR_HTC_LA_SPA_6.15.599.101_Radio_4T.28.3218.04_10.33E.1718.01D_release_388532_signed.zip
You don't need to input the command twice, the phone will reboot itself after the first part and once back in ruu mode the second part will start to flash automatically.
alray said:
That's fine now go back in ruu mode using
Code:
fastboot oem rebootRUU
and once there proceed with
Code:
htc_fastboot flash zip PN07IMG_M7_U_K443_SENSE60_MR_HTC_LA_SPA_6.15.599.101_Radio_4T.28.3218.04_10.33E.1718.01D_release_388532_signed.zip
You don't need to input the command twice, the phone will reboot itself after the first part and once back in ruu mode the second part will start to flash automatically.
Click to expand...
Click to collapse
All done, phone is now stock and working apparently (fingers crossed till i put a sim and try to install wsp xd). Thanks man, you're a genius and a real life saver!
Just another off-topic question, if i wanna sell the phone and wanna wipe out all my personal info, what do i have to do? Thanks again.
NickTheConqueror said:
All done, phone is now stock and working apparently (fingers crossed till i put a sim and try to install wsp xd). Thanks man, you're a genius and a real life saver!
Just another off-topic question, if i wanna sell the phone and wanna wipe out all my personal info, what do i have to do? Thanks again.
Click to expand...
Click to collapse
A factory reset will remove all your personal info from the phone.
It can be done from bootloader (3rd option when in the hboot menu) or from the OS: Settings --> Backup & reset --> Reset phone
You're welcome

Categories

Resources