Related
Note to all users: This thread is now closed. I will no longer be updating GladRoot as there are more reliable and simpler methods for obtaining root on the newer firmwares. Support can still be found through PM for the older firmware versions.Note to all users on non-AT&T/Bell devicesThis is currently untested on anything but AT&T and Bell phones. You can run this on any phone, and at the very worst, it just won't work. There's almost 0 chance you will harm your phone by running this, so feel free to try. Please report back what firmware version you tried it on, and if it worked or not and I'll update the first post here to reflect. I don't have any device but an AT&T Atrix so I can't test any of the other versions myself, I need your help!GladRoot v4.3 (AT&T 1.83 Update Supported - READ DIRECTIONS)
In the interest of cleaning things up and putting all the current information into one place, with links to everything you'll need to get this working.
Basically, there's a ton of misinformation floating around about current root methods. This is your one stop shop for all your root needs. To explain, the SuperOneClick method installs busybox a second time. The Atrix already has busybox installed, so there's no need to install a duplicate. This can cause issues with other mods. GladRoot will take care of everything SuperOneClick did. I've contacted the developer to see if there's a way around this.
Start Here
If you have an AT&T Atrix and want to update to 1.57/1.83 with root, follow the first set of instructions.
If you have a Bell Atrix or an AT&T Atrix on 1.26 or 1.52 and just want to root, go to the second set of instructions.
Please, please, PLEASE, read the whole first post before asking questions. Chances are your question is already covered in the directions.
If you have any features requests or notice any bugs, please PM me, I might miss them in this thread.
To unroot, just run unroot.bat
Note to users seeing "Unable to detect device" error: Disable USB debugging, and turn it back on. Make sure your connection type is set to None. If you need the drivers, they are available here: 32-bit Drivers and 64-bit Drivers
Little bit of additional info here:
This will root your phone. There is no need to run aRoot before this, and you should NOT be running SuperOneClick anymore.
This has options to enable sideloading and the tethering APN. Enabling sideloading will not add an Unknown Sources checkbox, it will just enable it. I don't see any reason for the need to disable this, so unless someone can make a case for the checkbox (that makes sense for users), it will remain this way.
Unlike v1, the scripts are fully automated. You need only click "allow" to superuser when prompted for certain steps.
If you are already on 1.57/1.83 and do not have root, you MUST flash back to 1.26 for this to work. NO EXCEPTIONS.
Installation instructions: 1.26 to 1.57/1.83
Read the directions.
Read the directions again.
Read the directions a third time. If you do not understand a step, ASK before starting.
Download the script
Extract the GladRoot folder and files to C:\. Do not install anywhere else. Having it inside a folder with a space will cause the script to FAIL.
Make sure your device is 1.2.6 and is not running any mods, I recommend a fresh SBF flash of 1.2.6. Download links and installation instructions here
Enable USB debugging (Settings -> Applications -> Development).
Connect your phone (I recommend setting USB Connection to 'None').
Run gladroot.bat and follow the on-screen directions (If you're using Windows 7, run as admin by holding down control and double-clicking).
Verify that there are no errors before updating.
Go to Settings -> About phone -> System updates
Follow the on-screen instructions. First download the update (you will need a Wi-Fi connection for this), then it will prompt you to install.
The update will reboot the device and install itself. If this part fails it's because you are not on stock 1.2.6 firmware. Start over and read the directions.
When it boots back up, verify USB debugging is still on. Some users report that disabling and re-enabling USB debugging solves a few issues with the script detecting your device (Settings -> Applications -> Development).
Run afterupdate.bat (If you're using Windows 7, run as admin by holding down control and double-clicking).
Make sure you allow the superuser request on your phone or it WILL fail.
All done! Enjoy your rooted Atrix on 1.57/1.83!
Screenshots**REMOVED FOR NOW UNTIL I GET A CHANCE TO UPDATE**Installation instructions: 1.26, 1.52 and Bell Atrix
Read the directions.
Read the directions again.
Read the directions a third time. If you do not understand a step, ASK before starting.
Download the script
Extract the GladRoot folder and files to C:\. Do not install anywhere else. Having it inside a folder with a space will cause the script to FAIL.
Make sure your device is the correct version. Go to Settings -> About phone -> Build number and make sure it matches one of the following:
OLYFR_U4_1.2.6
OLYFR_U4_1.5.2
OLYLA_U4_0.37.4
If you need to flash an SBF first, Download links and installation instructions here.
Enable USB debugging (Settings -> Applications -> Development).
Connect your phone (I recommend setting USB Connection to 'None').
Run gladroot.bat and follow the on-screen directions.(If you're using Windows 7, run as admin by holding down control and double-clicking).
When you get to the step that asks if you're updating to 1.57, just say no.
Verify that there are no errors.
All done! Enjoy your rooted Atrix!
DISCLAIMER
I am not responsible if this bricks your phone or if it doesn't work properly for you. I've done everything I can to ensure smooth execution.
If you have any issues, feel free to PM me, reply to this thread, or come find me on IRC (I'm Fenrir or fen|works on IRC)Special Thanks
Sogarth for adb wizardry, shawnbuck for the concept and getting the ball moving, designgears for the initial aRoot script method, and everyone on XDA and IRC who helped contribute and test.Changelog
Version 4.3
Cleaned up script a tiny bit
Added textual support for 1.83 (the method hasn't changed, it's always worked)
Version 4.2
Added Uknown Sources checkbox to sideloading, as well as enabling it.
Added unroot script.
Version 4.1
Fixed a few minor aesthetic errors in the script
Version 4
Added a pause after the superuser request so if it fails, users can read the output.
Started mapping out log process for error catching.
Removed abd kill-server from the beginning of the file as I think it might be causing problems on slower machines.
Version 3
Removed option to root, it just roots. This will not harm your phone if you're already rooted.
Added support to root all devices, including Bell Atrix.
Cleaned up and improved script.
Changed name from Root v2 to GladRoot (Which is Root v3)
Version 2
Massive improvements to deployment script
Removed need to manually enter commands
Version 1
Initial Release
I love you guys lol!
So will this method (or the idea behind it) work for future updates (like the supposed ones for HSUPA, voice quality and one day eventually maybe gingerbread?)
Or do we have no idea about those?
Vigneshd said:
I love you guys lol!
So will this method (or the idea behind it) work for future updates (like the supposed ones for HSUPA, voice quality and one day eventually maybe gingerbread?)
Or do we have no idea about those?
Click to expand...
Click to collapse
I would assume so, unless Moto closes this hole? Not sure if this is a root exploit like psneuter or not.
Also flashing my phone 1.2.6 and will attempt this, will post back my results
So do this version allow sideloading?
awww yeahhh
PixoNova said:
I would assume so, unless Moto closes this hole? Not sure if this is a root exploit like psneuter or not.
Also flashing my phone 1.2.6 and will attempt this, will post back my results
Click to expand...
Click to collapse
Unfortunately, it is possible to close this hole, but I don't think moto is going to get it for a little while.
plmiller0905 said:
So do this version allow sideloading?
Click to expand...
Click to collapse
i assume so. i'm able to sideload
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync. I put the new retainroot folder in C:\.
Nothing works.
Have I missed something?
Any ideas?
drjim said:
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync.
Nothing works.
Have I missed something?
Any ideas?
Click to expand...
Click to collapse
open command prompt and type:
Code:
adb devices
What does it return?
drjim said:
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync.
Nothing works.
Have I missed something?
Any ideas?
Click to expand...
Click to collapse
USB debugging on?
USB mode set as None?
Ririal said:
open command prompt and type:
Code:
adb devices
What does it return?
Click to expand...
Click to collapse
I'm in C:\Users\My Name>
Is that the directory I should be in? If not, which and how to get there (I'm not great with cmd)?
shawnbuck said:
Unfortunately, it is possible to close this hole, but I don't think moto is going to get it for a little while.
Click to expand...
Click to collapse
So is this a hole that allows us to exploit another hole?
s0dhi said:
USB debugging on?
USB mode set as None?
Click to expand...
Click to collapse
Yes to both.
drjim said:
I'm in C:\Users\My Name>
Is that the directory I should be in? If not, which and how to get there (I'm not great with cmd)?
Click to expand...
Click to collapse
I changed directory to C:\ in cmd and typed in adb devices. Its response: List of devices attached.
Only thing I haven't done is flash SBF (whatever that is). But I'm dling it now...along with RSDlite (whatever that is).
Any ideas why I got all the way to the second command prompt with permission denied? I never got the super user prompt on my phone. Can I still put the phone in debug mode and rerun afterupdate.bat to re-root?
PixoNova said:
So is this a hole that allows us to exploit another hole?
Click to expand...
Click to collapse
This isn't quite a hole, just a little magic-show type trickery really.
tdamocles said:
Any ideas why I got all the way to the second command prompt with permission denied? I never got the super user prompt on my phone. Can I still put the phone in debug mode and rerun afterupdate.bat to re-root?
Click to expand...
Click to collapse
What do you mean second command prompt?
Failed backup?
OK, I'm on stock 1.2.6, said yes to already rooted and yes to side load and no to tether. It starts and says pushing backupsu.sh... then retval = and backup failed to execute properly. What am I doing wrong? I have developer on and usb = none. Can't seem to get it to work...
when i run beforeupdate i get backup failed to execute properly
am i missing something?
I followed the LG Revo downgrade instructions pricisely but when attempting to register the vs910.dll after moving it to the newly created Models folder within C:\LG Electronics\LGNPST\ directory, I get the following error:
"The module vs910.dll was loaded but the call to DllRegisterServer failed with error code 0x80020009."
Can someone help?
Had same error on x64 bit system, I wasn't able to fix it though, I had to use a x32 version of windows on another computer. :/
From http://forum.xda-developers.com/showthread.php?t=1211295&page=2
open CMD with Admin privileges and then type
Code:
regsvr32.exe "C:\LG Electronics\LGNPST\Models\VS910.dll"
Click to expand...
Click to collapse
I was having the same problem, did this with no issues.
Code:
regsvr32.exe "C:\LG Electronics\LGNPST\Models\VS910.dll
Use the code i have posted, the one above has a typo. Make sure you check "run task with administrative privileges" in the "create new task" box as stated above.
Framework43 Had same error on x64 bit system, I wasn't able to fix it though, I had to use a x32 version of windows on another computer. :/
Click to expand...
Click to collapse
I got this to work on Windows 8 x64, so I don't think there is a problem with the type of Windows you have installed, but some problem somewhere else.
Thanks for the catch, I forgot they had the wrong code in the link. Fixed.
thank you
wow, that was awesome guys thanks so much, worked like a charm!!!
Now if someone could only figure out how to Root v6 so we don't have to do this downgrade nonsense....
I ran into the same issue, but started XP Mode on my Win7x64 tied in the usb port with the phone and everything went perfectly - rooted and installed Revolt mod in no time
follow up question
ok so now that I got that dll properly registered, I tried to root using Superoneclick but kept getting permission denied error so I did it manually through ADB and I think it worked, but after downloading SU and running it, it tells me I need to update my SU binary but whenever I try, the program crashes...help again!
I couldn't get the newest version of S1C to work, or the ABD method. It appeared to work in ABD, but would crash Superuser. I ended up using S1C v1.63 and it worked just fine for me.
Try using superoneclick version 1.7 and use the rageagainstthecage exploit if you're having issues with root. Make sure all antivirus is disabled before downloading and installing.
Go to clockwork recovery and do the "fix permissions" procedure. That might help, it did on a Thunderbolt today that had problems updating the su binary. Do rooted programs work?
dbeauch said:
ok so now that I got that dll properly registered, I tried to root using Superoneclick but kept getting permission denied error so I did it manually through ADB and I think it worked, but after downloading SU and running it, it tells me I need to update my SU binary but whenever I try, the program crashes...help again!
Click to expand...
Click to collapse
You can't use the latest version, you need version 1.7. Also, when you connect the phone to the computer, you need to pull down the notification menu and select "Internet Connection." USB Debugging will NOT start in "Mass Storage" or "Charge Only."
adrenaline_rush said:
Try using superoneclick version 1.7 and use the rageagainstthecage exploit if you're having issues with root. Make sure all antivirus is disabled before downloading and installing.
Go to clockwork recovery and do the "fix permissions" procedure. That might help, it did on a Thunderbolt today that had problems updating the su binary. Do rooted programs work?
Click to expand...
Click to collapse
I used S1C version 1.7 also - could not get it rooted otherwise. Also had to mess with the "Debugging Mode" to make it work - turn it off, then quickly turn back on when at Step 6. Once I did that, everything worked perfectly.
dbeauch said:
I followed the LG Revo downgrade instructions pricisely but when attempting to register the vs910.dll after moving it to the newly created Models folder within C:\LG Electronics\LGNPST\ directory, I get the following error:
"The module vs910.dll was loaded but the call to DllRegisterServer failed with error code 0x80020009."
Can someone help?
Click to expand...
Click to collapse
THIS IS BULLCRAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!
CAN'T MOVE BACK TO 2.3.4 BECAUSE I CAN'T GET A DANG THING TO WORK. First, the components msi file wouldn't install because of some error code, plus i could never get VS810.dll to register. Even did research online, and found that people running 64 bit os were having trouble, so i used my 32 bit os computer BUT STILL DIDN'T WORK ... BEYOND USING A 32 BIT OS, I FOUND NO SOLUTION ON THE ENTIRE WORLD WIDE WEB TO GET THIS TO WORK!!!!!!!
wncoulte said:
THIS IS BULLCRAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!
CAN'T MOVE BACK TO 2.3.4 BECAUSE I CAN'T GET A DANG THING TO WORK. First, the components msi file wouldn't install because of some error code, plus i could never get VS810.dll to register. Even did research online, and found that people running 64 bit os were having trouble, so i used my 32 bit os computer BUT STILL DIDN'T WORK ... BEYOND USING A 32 BIT OS, I FOUND NO SOLUTION ON THE ENTIRE WORLD WIDE WEB TO GET THIS TO WORK!!!!!!!
Click to expand...
Click to collapse
I had an issue getting the "VS910.dll" to register also. What worked for me was diabling the user account controls in windows. After you do that will have to restart your computer. Then it should register just fin
Sent from LG Revo Stock ZV8 Using XDA App
SnoeDogg said:
I had an issue getting the "VS910.dll" to register also. What worked for me was diabling the user account controls in windows. After you do that will have to restart your computer. Then it should register just fin
Sent from LG Revo Stock ZV8 Using XDA App
Click to expand...
Click to collapse
^^^^^
What he said... i just explained the process in another post in the developement section
Sent from my VS910 4G using XDA
kcarden said:
^^^^^
What he said... i just explained the process in another post in the developement section
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
how to do this in windows 8 please
dbeauch said:
I followed the LG Revo downgrade instructions pricisely but when attempting to register the vs910.dll after moving it to the newly created Models folder within C:\LG Electronics\LGNPST\ directory, I get the following error:
"The module vs910.dll was loaded but the call to DllRegisterServer failed with error code 0x80020009."
Can someone help?
Click to expand...
Click to collapse
Solution....
1. If you can not register this DLL, Go to safe mode on Windows 7 and register VS910.DLL.
IT works For me. 100%
Hi everyone,
I am using a white Galaxy Note w/ GB 2.3.6 (KK2 kernel).
I've read in a different forum that users are able to use the exploit for KK1 works as well for KK2/KK3/KK4.
I downloaded zergRush KK1 (root + CWM), and ran the file: not-rooted-yet.bat
A CMD window pops up and the process halts after it says: * daemon started successfully *.
I have the ADB drivers installed, and both "USB debugging" and "Unknown sources" ticked.
I ran the BAT file whilst the phone was in Charge mode only.
I don't know why the rooting process + installation of CWM keeps on failing.
Please help!!
Thanks.
EDIT:
This is how CMD looks like:
CONFIRM ALL THE ABOVE THEN
Press any key to continue...
--- STARTING ---
--- WAITING FOR DEVICE ---
* daemon not running. starting it now *
* daemon started successfully *
(the process completely halts here)
I rooted my device using ODIN
entropy96 said:
I rooted my device using ODIN
Click to expand...
Click to collapse
If you rooted with a kernel you probably initiated the binary flash counter which could give you trouble regarding warranty issues
---------- Post added at 07:24 AM ---------- Previous post was at 07:17 AM ----------
entropy96 said:
Hi everyone,
I am using a white Galaxy Note w/ GB 2.3.6 (KK2 kernel).
I've read in a different forum that users are able to use the exploit for KK1 works as well for KK2/KK3/KK4.
I downloaded zergRush KK1 (root + CWM), and ran the file: not-rooted-yet.bat
A CMD window pops up and the process halts after it says: * daemon started successfully *.
I have the ADB drivers installed, and both "USB debugging" and "Unknown sources" ticked.
I ran the BAT file whilst the phone was in Charge mode only.
I don't know why the rooting process + installation of CWM keeps on failing.
Please help!!
Thanks.
EDIT:
This is how CMD looks like:
CONFIRM ALL THE ABOVE THEN
Press any key to continue...
--- STARTING ---
--- WAITING FOR DEVICE ---
* daemon not running. starting it now *
* daemon started successfully *
(the process completely halts here)
Click to expand...
Click to collapse
I think KK2 is not supported, at least not by CF Root for cwm. You can root however with DoomLORD http://forum.xda-developers.com/showthread.php?t=1329360. You`ll have root and busybox but no cwm. Download rom manager from market and flash recovery (cwm) with that. Good luck If you have connection problems try another usb port.
I m not pro or something and i know that it this thread may be a thrash but please guys help me root my phone i have tried to root it with the superoneclick but it does fail at rageagainstthecage and i mean it stucks there i have done the usb debbuging and also i havent mounted the memory card / sd card.
I have also tried one other program DooMLoRD v4 and it also fails because all the time it tries something and it says failed failed failed ....
Could anyone help me im a newbie so i need as much help as it would be possible.
Thanks for reading.
its firmware is 2.1-update1
model number e15i
TraCegr said:
I m not pro or something and i know that it this thread may be a thrash but please guys help me root my phone i have tried to root it with the superoneclick but it does fail at rageagainstthecage and i mean it stucks there i have done the usb debbuging and also i havent mounted the memory card / sd card.
I have also tried one other program DooMLoRD v4 and it also fails because all the time it tries something and it says failed failed failed ....
Could anyone help me im a newbie so i need as much help as it would be possible.
Thanks for reading.
its firmware is 2.1-update1
model number e15i
Click to expand...
Click to collapse
install all drivers that need for x8 here and here
1. use flash tool - click PADLOCK icon
or
2. use x8toolbox
i have pc company i believe that covers it as i have read
use superoneclick
the problem is that i used superoneclick and it stucks at a point where it says rageagainstthecage
BlackRabbit1703
how do i install
X8_drivers??
turn on usb debugging then use superoneclick, try newer version...if u'r using newer then use 2.1.1..it worked for me.....have u installed gordon't gate drivers?
if superoneclick 2.1.1 not working then install gordon gate drivers then use flashtool for root
bandarigoda123 said:
turn on usb debugging then use superoneclick, try newer version...if u'r using newer then use 2.1.1..it worked for me.....have u installed gordon't gate drivers?
if superoneclick 2.1.1 not working then install gordon gate drivers then use flashtool for root
Click to expand...
Click to collapse
yes and also i have 2.3 superoneclick i just stuck rageagainstthecage for some reason
Waiting for device...
OK
Running rageagainstthecage...
OK
***IF IT KEEPS LOOPING, TRY DISABLING USB DEBUGGING NOW***
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Running rageagainstthecage...
i have installed the drivers but i dont know why
try with x8toolbox
stamatis16 said:
try with x8toolbox
Click to expand...
Click to collapse
i dont know how to use it correctly i select e10 then close my phone press back button then connect it to pc again
just use superoneclick 2.1.1
try it now
TraCegr said:
i dont know how to use it correctly i select e10 then close my phone press back button then connect it to pc again
Click to expand...
Click to collapse
no need for flash mode with x8toolbox, you just connect it without doing anything, with usb debuging on
stamatis16 said:
no need for flash mode with x8toolbox, you just connect it without doing anything, with usb debuging on
Click to expand...
Click to collapse
i did it with usb debugging and it shows me an error i chose 1 and then 1 and after this
processing command...
waiting for device...
running psneuter exploit on device...
unable to chmod /data/local/tmp/psneuter: no such file or directory
device not exploited!!!
this error comes.
and about superoneclick2.1 i cant use that i get an error
SuperOneClick v2.1.1.0
Checking drivers...
Killing ADB Server...
* server not running *
OK 0,05s
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK 4,05s
Waiting for device...
OK 0,03s
2.1.1
Getting manufacturer...
Sony Ericsson
OK 0,02s
Getting model...
E15i
OK 0,02s
Getting version...
-X_d
OK 0,02s
Checking if rooted...
False
OK 0,03s
Installing BusyBox (temporary)... - Step #1
2015 KB/s (1062992 bytes in 0.515s)
OK 0,55s
Installing BusyBox (temporary)... - Step #2
OK 0,16s
Rooting device... - Step #1
cannot stat 'C:\Users\TRACE\Downloads\Compressed\SuperOneClickv2.1.1-ShortFuse\Exploits\psneuter': No such file or directory
OK 0,04s
Rooting device... - Step #2
Unable to chmod /data/local/tmp/psneuter: No such file or directory
OK 0,02s
Rooting device... - Step #3
OK 0,00s
Rooting device... - Step #4
./psneuter: not found
FAILED
somehow i managed to install a program superuser
TraCegr said:
somehow i managed to install a program superuser
Click to expand...
Click to collapse
OK you should be rooted now..
To test quickly, open terminal and type:
su
followed by ENTER
If you are rooted then you'll get a prompt askinmg you to allow root access..
Good luck..
i saw that when it was rooted ehm how can i install the app 2 sd i need it
I was hoping for some help getting my S4 Active rooted.
But first, apologies if this thread is misplaced.
I have reviewed the following threads and followed the instructions therein, but to no avail:
http://forum.xda-developers.com/showthread.php?t=2347793
http://forum.xda-developers.com/showthread.php?t=2576460
http://forum.xda-developers.com/showthread.php?t=2596352
Against my better judgment, I tried various other options like One Click Root, even thought it was not certified for the I537; I also tried Kingo, VRoot and another Chinese root, and still nothing.
Phone:
AT&T
Samsung-SGH-I537
Version: 4.2.2
BaseBand: I537UCUAMF3
Kernel: 3.4.0-784654
From a new phone, I attempted to use activeroot.apk. I get the confirmation message that the phone is rooted, but Root Check, and Root Checker Basic both indicate no root. However, I was able to install SuperSU and update the binaries. I also installed SuperSU, Root Explorer, and Titanium Backup, and they all appeared to be working. Next, I installed XPrivacy.
However, at no time did any of the root checkers confirm root.
Today, SuperSU disappeared from my install list. I re-installed it, but upon attempting to update the binaries, I received an error message indicating that it has no binaries, and no way to install them. Titanium backup now gives me an error message indicating that I don't have root.
I unistalled activeroot, but when I navigated back to geohot's site to click on the "lambda", I got an error indicating that I needed an SD card to download activeroot. The card I was using at the time was a SanDisk 8gb SDHC Class 2 card from an old phone. So I researched and found that older cards, or cards from other devices can sometimes cause difficulties. So my current card is a SanDisk 32gb SDHC Class 10 that I formatted in the phone.
Now when I go to geohot's site on the default browser, I click on the "lambda", receive a notification that the download has commenced, but nothing further - no confirmation message. On Dolphin Browser, I still get the "SD card is required to download ar.apk."
Thanks to anyone who had read this far; and I would certainly appreciate any assistance that any of you are willing to provide.
Thanks so much.
You said you tried One Click Root. Have you tried SRS One Click Root from srsroot,com or did you try oneclickroot,com ? SRS Root worked for me on a cheapo Bauhn tablet - wasn't a device specific root, just used some sort of flaw, so (from my limited understand) the following instructions should apply to you (since I can't post links yet, I c+p'd)
1. Download the free SRS One Click Android Root v4.6 from SRSRoot One Click Root for Android (SuperUser) and install on your PC.
2. Download the free Root Checker by joeykrim from Play Store
3. Connect your device to your PC with the USB cable, wait for any drivers to install.
4. On the device:
a. Make sure Unknown sources is turned on – Settings>Security>Unknown sources
b. Make sure USB Debugging is turned on – Settings>Developer options and turn on at Top Right Corner if grayed out and turn on both USB debugging and Allow mock locations
c. Make sure the USB computer connection is set up – Settings>Storage and click on the 3 dots in the Top Right Corner – Click on USB computer connection and select Mount SD card.
5. Back out to the Home screen
6. Wait until the tablet goes into standby and the screen is black
7. Run Super One Click Root (you need to be connected to the Internet)
8. Select ADB Toolbox
9. Select Reboot Device
10. Wait for Reboot
11. Wait until the tablet goes into standby and the screen is black
12. Select Root Device (All Methods)
13. Follow directions and when you unlock the screen
14. Select Install SuperUser
15. When the root finishes turn off and restart the device and it should be rooted
16. Use the root checker
I hope this works for you. Credits to enviro8 from the androidtablets forum and obviously everyone who developed all that nitty gritty stuff.
Tiskael,
Thanks for your help. I followed your instructions, but I got some confusing results - the rooting program indicates that I have SU Root, but the Root Checker programs all indicate that I do not. Super SU and Root Explorer are still not working.
---= SRS One-Click-Root v4.7 =---
4:30:33 PM - Starting ADB Server..
4:30:38 PM - Manufacturer: samsung
4:30:38 PM - Model: SAMSUNG-SGH-I537
4:30:39 PM - Android Version: 4.2.2
4:30:39 PM - Build ID: JDQ39.I537UCUAMF3
4:30:39 PM - Board ID: MSM8960
4:30:39 PM - Chipset Platform: msm8960
4:30:39 PM - Getting OffSets.. : 0x8003 0x8005 (False)
4:30:40 PM - Checking Root access: True
[x] Device already have SU Root access, Rooting not needed.
My 14 day return period ends this weekend; I am going to do a Reset and start again from scratch. Certainly would appreciate any help if someone out there has had a similar experience.
Dansun said:
My 14 day return period ends this weekend; I am going to do a Reset and start again from scratch. Certainly would appreciate any help if someone out there has had a similar experience.
Click to expand...
Click to collapse
FWIW: This process worked for me:
http://forum.xda-developers.com/showthread.php?p=44165374#post44165374