Database Develop

How to Flash Stock Rom

WARNING: Internal SD content will be erased
To begin with go here and download the ROM of your country/region
Secondly download smartflash and drivers from here and install them
Now run SmartFlashTool_P990.exe
Turn the phone off,remove the battery and connect the phone to pc via usb while holding down the vol.down button.
Now you should be able to see the software upgrade screen, and COM port of smartflash will change automatically.
Now in smart flash select "ROM Copy D/L"
Make sure that "Normal Mode" is checked and "Erase Cal" is NOT checked
In AP Bin click browser and select the (BIN) file
In CP Bin click browser and select the (FLS) file
Click start, sit back and wait
I'll try to remember next time that I return to stock rom record it and upload it
Here is the video I said i would record

Yes i do it many time and works very good.
The flash take about 7 minutes

I. Thought you had to nvflash to put stock rom back on device? Or is that just if the phone is bricked?
Sent from my LG-P990 using XDA Premium App

thatguychris said:
I. Thought you had to nvflash to put stock rom back on device? Or is that just if the phone is bricked?
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
Follow my instructions and everything is gonna be ok

nice tutorial. well done. thanks for sharing

Optimus2XPrime said:
Follow my instructions and everything is gonna be ok
Click to expand...
Click to collapse
I'm going to trust you and try this later
Sent from my LG-P990 using XDA Premium App

thatguychris said:
I'm going to trust you and try this later
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
IIt seems that today I'll flash uk 10d ROM and i'm thinking of making a video!

Optimus2XPrime said:
IIt seems that today I'll flash uk 10d ROM and i'm thinking of making a video!
Click to expand...
Click to collapse
Would you be able to share the link in this thread if possible? I have used nvflash before but smartflash is much easier. I'm on modaco fr17 at the moment.but want to go stock again ready for update if it ever happens
Sent from my LG-P990 using XDA Premium App

thatguychris said:
Would you be able to share the link in this thread if possible? I have used nvflash before but smartflash is much easier. I'm on modaco fr17 at the moment.but want to go stock again ready for update if it ever happens
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
lucky i have made nandroid backup on my stock rom too ~~...

gliew_87 said:
lucky i have made nandroid backup on my stock rom too ~~...
Click to expand...
Click to collapse
That's what I will do this time I think saves alot of hassle, have you tried the smartflash method?
Sent from my LG-P990 using XDA Premium App

Hello,
Sorry for my english.
Yesterday, i want to flash the new 606 baseband on my LG O2X.
I use smartflash but i was wrong in using this program.
I have cheked the box "Erase CP" and now my O2X does'nt find the network. My phone send "carte incorrect" or "No network".
My SIM work in another phone and another SIM work in my phone.
I try to flash all the other baseband like 208, 318 or 405 but each time the problem is the same, i have no network.
I don't know what to do.
Thank you.

thatguychris said:
That's what I will do this time I think saves alot of hassle, have you tried the smartflash method?
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
for flashing baseband yes, rom nope yet.

Video Added

I can not get the Software Update on O2X
hi i am new in this forum, after checking video i thought i got the solution.
i downloaded all the require software for example smartflash and its drivers.
once i connect the usb and hold down -volume key nothing happens. in video the phone goes into software update.
Please guide me what trick i am missing basically.
By the my phone always get reboot automatically and i am using V10b just upgrade it from LG, before on V10a it was working fine.
Thank you in advance and looking forward to hear from you guys.

atiqkh said:
hi i am new in this forum, after checking video i thought i got the solution.
i downloaded all the require software for example smartflash and its drivers.
once i connect the usb and hold down -volume key nothing happens. in video the phone goes into software update.
Please guide me what trick i am missing basically.
By the my phone always get reboot automatically and i am using V10b just upgrade it from LG, before on V10a it was working fine.
Thank you in advance and looking forward to hear from you guys.
Click to expand...
Click to collapse
You have to turn off your phone, connect it to usb and press the vol.down button at the same time

Optimus2XPrime said:
You have to turn off your phone, connect it to usb and press the vol.down button at the same time
Click to expand...
Click to collapse
basically my phone always reboots, even i do hard restart it stuck on LG logo or sometimes at initialization. even with hard restart it does not start.
i did all the procedure that you mentioned...turned off the phone and hold down -volume key and plug usb...nothing happening. but when i hold volume key + and - my laptop detect phone with APX. but nothing after that....any suggestion on this.
Thank you

@Optimus2xPrime Thanks for the tutorial and making of video.
Sent from my LG-P990 using XDA App

I do with several time it always die at 50% with message "time out error" how to solve this problem ?.

You can't use the app Rom Manager to do this?

Nice the tutorial and video!!
Big Help...
Thanks!!

[information] GB is released for p920

Link to thread http://forum.xda-developers.com/showthread.php?goto=newpost&t=1355879

Already installed and its working for the thrill

josuelopezv said:
Already installed and its working for the thrill
Click to expand...
Click to collapse
A bit more specific...
Sent from my LG-P925 using XDA App

I downloaded the file from Lg Server
Followed the guide on how to install a KDZ files (link posted above) thanks to adixtra
When the phone rebooted it when into a bootloop so i removed the battery put it back on and went into recovery (volume down + 3D button + power button) wipe data and factory restore
reboot the phone and now I have gingerbread
did a superoneclick root access to gain root
installed CWM again
added the APN's and did a titaniumBackup batch restore and now everything its working and with the nice features
working on a rom for the thrill to add windows FX and other things

Are you able to go back to stock froyo afterwards? All features work? 4G, gps, mms, etc. Also, will there be a need to go to stock and grab the OTA gingerbread update for the thrill when it is released? Thanks in advance.
Sent from my LG-P925 using xda premium

Mart1an said:
Are you able to go back to stock froyo afterwards? All features work? 4G, gps, mms, etc. Also, will there be a need to go to stock and grab the OTA gingerbread update for the thrill when it is released? Thanks in advance.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Yes you can go back to froyo just by doing the exact method but selecting the KDZ file for froyo.
ALL the features works (this is the live official update LG is pushing to european handsets) i have tried everything on my thrill and its working. (As I said before I can't test 4g so you can go ahead and try) obviosly have to set the APN lists manually because you are flashing a debranded (optimus 3d) firmware instead of the AT&T
I suppose that AT&T will release the Official Thrill firmware in the first week of december but unitl then you can install this update risk free and have the advantage of running the new gingerbread roms without going into the hassle of flashing the baseband alone with an XP machine and all that hard work.
Anyone else has installed this on there Thrill besides me? someone in the US so can test the 4G?

I am thinking about doing it. But don't wanna get stuck because I am new to android and I am going to be getting a new phone thru warranty. I figured its perfect to try since i will be replacing this phone anyway, just wanted to make sure I could go back to stock first. Maybe I will try it tonight. I am currently running "Thrill Seeker" custom rom. Do I need to go to stock before doing this?
Edit: also, sorry if this is a stupid question, but does this come with 3D converter?
Sent from my LG-P925 using xda premium

Still can't connect at even 3g at home with the new 920 update. So I doubt 4g will even work

Mart1an said:
Do I need to go to stock before doing this?
Edit: also, sorry if this is a stupid question, but does this come with 3D converter?
Click to expand...
Click to collapse
Yes it comes with 3D converter, flash in the 3D camara, camara button remapped, etc ..
jznomoney said:
Still can't connect at even 3g at home with the new 920 update. So I doubt 4g will even work
Click to expand...
Click to collapse
Did you add the APN's ??

I'm not gonna bother with it then. I do need to try a different rom tho. Using Thrill Seeker and I like it but the DPI setting is too small for me.
Sent from my LG-P925 using xda premium

On my version of gb with 4g... bugs are have to use 3rd party dialer and the 4g works but not the signal bars just as others have reported. ill try to upload next day or two. You still have to flash kdz or baseband befire installing gb roms
Sent from my LG-P925 using XDA App

You can use dpi changer for that.
Sent from my LG-P925 using XDA App

I can confirm this is working on my ATT branded LG thrill.
Once i loaded the ROM it automatically restart the phone but stayed lg screen for long time,.I had to power+vol down+3d button to go to recovery mode and did factory reset ..working like charm.

adixtra said:
Link to thread http://forum.xda-developers.com/showthread.php?goto=newpost&t=1355879
Click to expand...
Click to collapse
Dear friends,
I tried to install by this method but did not continue the installation. There was a message "there is sufficient charge in the battery, recharge the device to continue", the battery has 80% load, it is normal that message appear?
This rom is for the LG Optimus 3D P-920. She will work on AT & T P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, etc.)

I was at 72 when I started. Went fine.
Sent from my LG-P920 using Tapatalk

Well, after flashing last night and spending some time using it, and getting some calls, so far so good.
Everything seems smoother overall, with less freezes. App compatibility seems better, and there is a definite difference in battery life.
Call quality and signal strength seem overall about the same, bit I thought it was pretty good before. Not quite as strong as my Atrix in bad areas, but not enough to bother me.
The only thing I haven't tried yet is 3g, or fauxG if you want to call it that. We have edge only at home. When I go back to work Monday I will be able to test that.
Sent from my LG-P920 using Tapatalk

This rom is for the LG Optimus 3D P-920. She will work on AT&T 4G thrill LG P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, Clockwork recovery, etc.)

stonyperson2 said:
This rom is for the LG Optimus 3D P-920. She will work on AT&T 4G thrill LG P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, Clockwork recovery, etc.)
Click to expand...
Click to collapse
There is no need to install anything beforehand the KDZ file has everything needed although it is recommended that after flashing to do a factory reset through recovery. It is in deed for the p920 but it works as well for the p925 although some users report the signal drops a little for the 4g although it works. Everything else function pretty well and most important battery life is longer.
---------- Post added at 10:34 AM ---------- Previous post was at 10:33 AM ----------
stonyperson2 said:
Dear friends,
I tried to install by this method but did not continue the installation. There was a message "there is sufficient charge in the battery, recharge the device to continue", the battery has 80% load, it is normal that message appear?
This rom is for the LG Optimus 3D P-920. She will work on AT & T P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, etc.)
Click to expand...
Click to collapse
If you have CWM you can try this:
-Charge the battery to 100%
-reboot to recovery
-wipe battery stats
-retry to apply the KDZ file

josuelopezv said:
There is no need to install anything beforehand the KDZ file has everything needed although it is recommended that after flashing to do a factory reset through recovery. It is in deed for the p920 but it works as well for the p925 although some users report the signal drops a little for the 4g although it works. Everything else function pretty well and most important battery life is longer.
---------- Post added at 10:34 AM ---------- Previous post was at 10:33 AM ----------
If you have CWM you can try this:
-Charge the battery to 100%
-reboot to recovery
-wipe battery stats
-retry to apply the KDZ file
Click to expand...
Click to collapse
thanks to two. Although I have not CWM, because my device does not install it by any method posted here on xda. (Rom manager, ADB, nothing).
Edit.
Thank you guys,
gingerbread successfully installed.
Now, CWR.
(???)

i flash my 925 with the kzd rom for 920,and my device's name change from 925 to 920 .at first ,seem all right ,and smooth,but today ,found bluetooth wrong ,can't open ,enles reboot,wifi have the same problem too.sorry for my english

[Q] Would love some help!!!!

I would like to flash Gingervolt to my revo. Every thread I look at says that the first step in doing so is to use CWM to make a back up. I try to install using rom manager and it brings up a list of phones that I have to pick from. I am sure you are all aware of this and I am being a HUGE noob right now but I searched the forums and didn't see anything about this. I Would really appreciate the help as to how i go about getting cwm for my phone and how to back up my phone.

Noob_In_Recovery said:
I would like to flash Gingervolt to my revo. Every thread I look at says that the first step in doing so is to use CWM to make a back up. I try to install using rom manager and it brings up a list of phones that I have to pick from. I am sure you are all aware of this and I am being a HUGE noob right now but I searched the forums and didn't see anything about this. I Would really appreciate the help as to how i go about getting cwm for my phone and how to back up my phone.
Click to expand...
Click to collapse
Don't flash gingervolt yet. Are you using froyo, or gingerbread? Then you need cwm, which is part of our oneclick program in the development section. Then you make that back up.
Sent from my VS910 4G using xda premium

markapowell said:
Don't flash gingervolt yet. Are you using froyo, or gingerbread? Then you need cwm, which is part of our oneclick program in the development section. Then you make that back up.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
I am using gingerbread. I have the one click program installed and I have installed all of the drivers. Since my phone is already rooted do I just use the CWM part or do i do the entire root andCWM

markapowell said:
Don't flash gingervolt yet. Are you using froyo, or gingerbread? Then you need cwm, which is part of our oneclick program in the development section. Then you make that back up.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Ok so I put CWM on using one click or whatever. I used quick boot to go into recovery. The Rom manager logo was there and it says CWM- Based Recovery V5.0.2.7. I pressed back up and backed up my entire system and that is the last thing I have done. My question is if i were to mess something up how would I make my phone go to the previous back up. Also am I ready for gingervolt now?

You just need cement. If ur already rooted
Sent from my VS910 4G using xda premium

*cwm.... stupid auto correct
Sent from my VS910 4G using xda premium

How do I know if I have it. It doesn't say it in rom manager. Or in my app drawer.
Sent from my VS910 4G using xda premium

Noob_In_Recovery said:
How do I know if I have it. It doesn't say it in rom manager. Or in my app drawer.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Get rid of rom manager. You do not need it. There is no good that will come of it. To many things can go wrong lol.
Use the all in one, it has a reboot recovery option now, after installing and it reboots, select reboot recovery. If it goes into it, then you are all set.

droidgenius said:
You just need cement. If ur already rooted
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Haahaha, yeah... cement works wonders on the revo. Jk...
Sent from my VS910 4G using Tapatalk

Ok so I am about to use that. The next step is to back up all data. Once I have done that the next step is to wipe all data!!! that is the scary part. How do i get back my stuff should something go awry. Once I get over that fear I press install zip from SD card and then I am done after I reboot. And this is all done in CWM. AM I correct in stating all of this.

mtmichaelson said:
Get rid of rom manager. You do not need it. There is no good that will come of it. To many things can go wrong lol.
Use the all in one, it has a reboot recovery option now, after installing and it reboots, select reboot recovery. If it goes into it, then you are all set.
Click to expand...
Click to collapse
Ok so I am about to use that. The next step is to back up all data. Once I have done that the next step is to wipe all data!!! that is the scary part. How do i get back my stuff should something go awry. Once I get over that fear I press install zip from SD card and then I am done after I reboot. And this is all done in CWM. AM I correct in stating all of this.

if you are already rooted, install Titanium Backup or Ultimate Backup or ROM Toolbox from the market they are all useful tools to back up all of your apps. Then wipe data, flash Gingervolt, then use backup program to restore your apps..

Noob_In_Recovery said:
Ok so I am about to use that. The next step is to back up all data. Once I have done that the next step is to wipe all data!!! that is the scary part. How do i get back my stuff should something go awry. Once I get over that fear I press install zip from SD card and then I am done after I reboot. And this is all done in CWM. AM I correct in stating all of this.
Click to expand...
Click to collapse
You do not have to wipe data, it is an option if you want a clean start. I would run your phone as it is for a couple Weeks and if it acts up, then consider a data wipe when other options have been used.
Sent from my VS910 4G using xda premium
How many threads are you going to start about your issue? I see another thread titled "Now what?" Keep it all here!! Goof!!

[Q] How To: Change baseband from V20c to V21e

Hey, first time poster long time reader, not sure if this is correct spot for this question but i will change if needed.
I currently downloaded cyanogenmod 7 which i am using now on my Lg Thrill, but I want Thrillseeker or thiaiz 03d rom, so that i can use my 3d features on my phone. So i installed thrillseeker rom, and thiaiz, and both i cannot connect to my data, this was the only problem i found with both, i tried to go in and change my APN settings but was not allowed, i believe i am in need of baseband V21e, therefore i am trying to figure out how to get V21e on my thrill, any help would be great and appreciated. Thanks

Same question here!!!!
I read and read and read ... I found couple European v21E kudzu files. Are they safe to flash?
What is the easiest way?
Thanks in advance!

Yeah man same here, i've been looking everywhere but I'm unable to find anything useful, this site seems to be the best for information, hopefully theres an answer for it

Follow these guides.
http://forum.xda-developers.com/showthread.php?t=1287236
http://forum.xda-developers.com/showthread.php?t=1491870
Sent from my LG-P925 using xda app-developers app

Hey bro thanks for the reply, i've tried to follow those steps, im unable to locate a V21e, (is there another i can use with thiller or with an o3D rom) also i'm unsure how to apply the update/new baseband to my phone

In the link I gave you to the dark lestat's guide has links to kdz files on the first page. If they don't work, go to acidhazardrom.com and there should be firmwares there. If that doesn't work, I might be able to upload the kdz for you.
Sent from my LG-P925 using xda app-developers app

alright bad news, i had CWM installed and had Cyanogenmod backed up, i tried this method you just told me, did STOCK RECOVERY
rebooted my phone, now im stuck. can't mount cache/recovery/command. when i go into my boot recovery its now different, i can't boot from my sd card, or use CWM, when i click recover stock i get an android icon with a exclimation mark over its head in a triangle and cannot go any furthur, if i just let it boot up, i get the lg screen, then that goes away and im left with a black screen,
what do i do now? this is not looking good

Thanks!
yourguitarist said:
Follow these guides.
http://forum.xda-developers.com/showthread.php?t=1287236
http://forum.xda-developers.com/showthread.php?t=1491870
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
Thanks man! And this is answer to my own question
I was reading that guide before and last night decided to try... It works nice! I couldn't run vbs script (for stupid reason drag/drop of vbs into cmd din't work) so did manual adjustment to hosts file.
The kdz file I downloaded was Greek one But it was easy to navigate to language settings and switch to English.
yes, after flashing kdz phone went into boot loop but I fixed it by booting into recovery and doing factory reset (I found it using search for that tread - you see, I used search!!! .
Then I rooted it with megatron and now in the process of flashing custom ROM.
Thanks again!
---------- Post added at 02:43 PM ---------- Previous post was at 02:34 PM ----------
ShellShock420 said:
alright bad news, i had CWM installed and had Cyanogenmod backed up, i tried this method you just told me, did STOCK RECOVERY
rebooted my phone, now im stuck. can't mount cache/recovery/command. when i go into my boot recovery its now different, i can't boot from my sd card, or use CWM, when i click recover stock i get an android icon with a exclimation mark over its head in a triangle and cannot go any furthur, if i just let it boot up, i get the lg screen, then that goes away and im left with a black screen,
what do i do now? this is not looking good
Click to expand...
Click to collapse
hmm...
I just followed that guide and it worked for me...
Did you have touch recovery? There was warning not to use touch recovery...
Can you go into recovery? (3D+vol_down+Power)

trying again now, my phone wasn't in download mode, was just showing up in device manager because it was on, i now have it in download mode and hopefully all goes well, i will get back to you

On the "Select Country & Language" box, click "Clear phone Software udpate Registry" when i click select country and language, there is no clear phone software update registry....

and when i go into the recovery (hold 3d buttom + vol down) its a different boot screen then i used to have, something about cache, command and log not being able to locate or somethin, my clockwork mod previous recovery that had cyanogenmod7 on it is not there anymore, when i restore system and wipe data i still cannot go any furthur, just a lit up black screen like

i also tried the boot recovery but it is now changed since i rebooted after the first step, it says something about cache log and command, not being able to be located or whatever, *not working* and my restore i had saved with clockworkmod (cyanogenmod7) is also unavailable

also lg mobile support tool says im up to date

GOOD NEWS everything worked perfect after, i am back to completely stock, that was fun, your method worked perfect, it was just me not being in download mode that messed everything up at first, THANK YOU, you were a great help, now to root again and get my programs back, let the fun begin again! haha

ShellShock420 said:
GOOD NEWS everything worked perfect after, i am back to completely stock, that was fun, your method worked perfect, it was just me not being in download mode that messed everything up at first, THANK YOU, you were a great help, now to root again and get my programs back, let the fun begin again! haha
Click to expand...
Click to collapse
OK, now it's my turn to cry...
I'm in Canada. I installed Greek version of v21e. Then I rooted with megatron and installed ThiaiZO3D ROM.
And now I have problem with my basebands... Here we use WCDMA 850 (band V) and WCDMA 1900 (band II). For some rason I lost my 850 band...
I read that I need to install proper baseband. But how can I do it?
I can go into Hidden menu (3845#*920#) - Network Mode and select WCDMA 850. Then I go into Modem Setting - Engineering mode and still can see UMTS_Band_II...
Any suggestions?
Thanks!!!

Goldenmeadow said:
OK, now it's my turn to cry...
I'm in Canada. I installed Greek version of v21e. Then I rooted with megatron and installed ThiaiZO3D ROM.
And now I have problem with my basebands... Here we use WCDMA 850 (band V) and WCDMA 1900 (band II). For some rason I lost my 850 band...
I read that I need to install proper baseband. But how can I do it?
I can go into Hidden menu (3845#*920#) - Network Mode and select WCDMA 850. Then I go into Modem Setting - Engineering mode and still can see UMTS_Band_II...
Any suggestions?
Thanks!!!
Click to expand...
Click to collapse
Im not sure.. Do you have the right apn set?
Sent from my LG-P925 using xda app-developers app

yourguitarist said:
Im not sure.. Do you have the right apn set?
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
Thanks for all help. I had some time today so I played with different basebands i.e. v20c-vs-v21e...
Here is what I found:
http://forum.xda-developers.com/showthread.php?t=1922249
Then I searched xda (oh yeah, I do it sometimes and here is my result:
http://forum.xda-developers.com/showpost.php?p=32435082&postcount=3
I hope it helps somebody.
Cheers!

Okay, do i need to be running a older windows to do this?? I have tried on windows 7ultimate and windows 8. I get the lg tool kit to run norm web update then the standard lg tool come in and connects then says my software is current. Ive tried a few diff tool kits but this way doesnt crash. Im using the kzd update kit found in the forums. Any help would be freakn awesome haha i have done alot of othe phones but never a lg, heck my sensation root and unlock was less complicated ha
Sent from my LG-P925 using xda app-developers app

No you need to run the programs in capatability xp sp2or sp3 whatever ur comp has right click on the icon go to properties click capatability tab select the xp spwhatever u got also running as administrator can help to
Sent from my LG-P925 using xda app-developers app

I'm looking for V10E KDZ file
Hi. I sick of my Thrill 4g AT&T.
So, I want to downgrade GB baseband to Froyo baseband.
I searched many times and found it but links are broken or no more files there.
If you have V10E KDZ file or konw its location, would you let me know?
Thank you.

[Q] Downgrade from LSA JB to ICS?

I've run the LSA firmware with little to no issues for a while now, but recently my phones decided to run hot and reboot itself with increasing frequency.
so I'de like to revert back to stock ICS and see if that helps or if I'm looking at a hardware failure.
is there any particular trick to this or can I just backup using Ti, load the new (old) ICS firmware in Odin and flash away?
thanks for any advice guys...

How old is your phone? Make sure your battery is good condition, before proceeding anything.
Sent from my GT-N7000 using xda premium

dsmas said:
How old is your phone? Make sure your battery is good condition, before proceeding anything.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Nov 2011 (just over 12 months)
the battery is a Gold higher capacity model, there is no bulges or tears and the heat isnt coming from that, I pulled it to check. the glass side is the hottest side.

Good. My suggestion is, go through drketan threads / tutorials which are comprehensive on your problem.
Sent from my GT-N7000 using xda premium

dsmas said:
Good. My suggestion is, go through drketan threads / tutorials which are comprehensive on your problem.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
on the problem or my intended solution?
I've started uninstalling apps because the thing reboots during backup.
every-time i uninstall an app it reboots as well.

If you want to go back to ics, backup whatever you want using tb.
Then boot into recovery. Format/system, data, cache, preload.
Then go to advanced and choose reboot download. Then connect to pc and flash using odin. Make sure not to wipe while on stock ics kernel. Install a safe kernel ASAP.

nokiamodeln91 said:
If you want to go back to ics, backup whatever you want using tb.
Then boot into recovery. Format/system, data, cache, preload.
Then go to advanced and choose reboot download. Then connect to pc and flash using odin. Make sure not to wipe while on stock ics kernel. Install a safe kernel ASAP.
Click to expand...
Click to collapse
cool, looks like I fixed it by rolling back to ICS.
Had to use Mobile Odin because the PC Odin wasnt playing ball... but meh. whatever gives me back my toy (that nexus s felt like a toy in my hands)
thanks all for the help.

senectus said:
cool, looks like I fixed it by rolling back to ICS.
Had to use Mobile Odin because the PC Odin wasnt playing ball... but meh. whatever gives me back my toy (that nexus s felt like a toy in my hands)
thanks all for the help.
Click to expand...
Click to collapse
can you please explain how you rolled back?

scorpion100 said:
can you please explain how you rolled back?
Click to expand...
Click to collapse
backed up user data using Ti
flashed PhilZ-cwm6-XXLSA-DBT-3.99.tar.md5 as per the PC Odin instructions
copied the N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar.md5 file to micro SD
flashed N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar.md5 u sing mobile odin pro
done.