I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
I had a similar SIM card issue when I tried to activate the 1700MHz band in Service mode (for fun). Wipes and stuff didn't solve anything. The way to revert it for me was flashing a full stock Samsung firmware in Odin.
Can you provide more details on how you did this?
Where does one get a full stock sammy note firmware?
Are there some good instructions on this?
I have flashed my SGT via odin several times. Same odin? Same process?
In the development section you will find some versions.
The key for me was flashing a new Modem (Radio/base band) image via Odin I think. I changed Kernels and ROM's but only flashing a ROM including the Modem got rid of my SIM issue. Not sure because in the end I flashed a full N7000OXAKJ1 firmware in Odin from here:
http://forum.xda-developers.com/showthread.php?t=1310513
It did the trick, though the tread is dead. I think any ROM including Modem might help, I currently running the 2.3.6 N7000ZSKK1 firmware and it is great, also included a Modem.
http://forum.xda-developers.com/showthread.php?t=1342797
fwelland said:
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
Click to expand...
Click to collapse
when this happened to me, also due to turning on 1700, I was able to reset my phone by doing a factory reset. Unless your modem.bin is corrupted, you should not have flash a new rom.
- frank.
ugh....
you mean factory reset via Settings->Privacy->Factory Reset?
Tried that... No affect. Is there another way to do this?
Was hoping to fix w/o the flash. NOTE: I did go into that service menu with the 3G Freq are listed. I was curious when I saw the post. But I never changed anything. Just saw the screen and thought "neato". I wonder if there is another service screen that has an option for 'unfuck'???
Still searching for answers, before trying the ROM route...
fwelland said:
ugh....
you mean factory reset via Settings->Privacy->Factory Reset?
Tried that... No affect. Is there another way to do this?
Was hoping to fix w/o the flash. NOTE: I did go into that service menu with the 3G Freq are listed. I was curious when I saw the post. But I never changed anything. Just saw the screen and thought "neato". I wonder if there is another service screen that has an option for 'unfuck'???
Still searching for answers, before trying the ROM route...
Click to expand...
Click to collapse
Here is Chodthewacko posted about it:
http://forum.xda-developers.com/showthread.php?t=1335920
Factory reset and toggle band settings seems to have worked for him. I got frustrated and Odin flashed everything, that worked for me.
whoa....
when I try that procedure (* # * # 1 9 7 3 2 8 6 4 0 # * # * ) I get a pretty empty screen...can't do much of anything...just some useless buttons on the bottom of screen when I select the menu button...
I think I recall seeing another number for doing a similar thing...
fwelland said:
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
Click to expand...
Click to collapse
OMG I have the EXACT same issue as you, and I got mine from NEGRI also! It was working perfectly until last night --- all of a sudden I got that circle and I've been trying to fix it since then! Please keep me posted if you find a solution, I was going to try and contact Negri tomorrow for an RMA.
still nothing.
I did a root. No changes...
I did a rom flash of kk1 ... no changes....
I was trying to reflash the modem with KJ6 modem....but have a signature failed problem...
now what???
I solved my issue by a combo of those steps.
I did full flash in Odin of jk1. When I rebooted that didn't solve things so I wanted to flash the other recommendation, kk the Chinese rom.
Upon entering recovery I noticed I lost 2e and was on 3e. So I had to download chainfire's rooted jk1 kernel and do that zerg rush to get root. It was while I was doing that that suddenly my similar got recognized. By the time it finished installing the rooter kernel I had full reception again. I flashed kk just for good measure and its been smooth since. Hope it works for you too and I'd love to know what the heck broke it in the first place??
Sent from my GT-N7000 using XDA App
hi fwelland, it's hk1981...so you tried the rom flash and it didn't work?
Hi hk1981,
No the KK1 rom flashed fine. By all accounts it works well, except that pesky phone part. This KK1 rom is really 'clean' and very little bloat-ware and it installs a vanilla boot animation (not a carrier one). All that is nice, but didn't help my problem
I did notice a peculiar thing: while in recovery (android recovery, not cwm) I get some warning about "CSC something or other, fixing".
I have a short list of things to try before I have exhausted my DIY options -- the post just above looks promising.
I think the answer is out there. We just need to keep looking and keep attention on this thread and others like it. This place and others like it are a huge help and I'd like to solve it and then give back a good set of instructions.
FWIW: I wonder if there was some voodoo in the polish rom that caused some issues in the modem when a different than expected sim was installed? Or if one of those funky polish apps that updated it self before I could turn off auto-updates has something to do with it (doubt this -- I don't think apps can do stuff unless rooted...)...
Still searching....I got this other pesky problem to deal with now: w-o-r-k
fwelland said:
Hi hk1981,
No the KK1 rom flashed fine. By all accounts it works well, except that pesky phone part. This KK1 rom is really 'clean' and very little bloat-ware and it installs a vanilla boot animation (not a carrier one). All that is nice, but didn't help my problem
I did notice a peculiar thing: while in recovery (android recovery, not cwm) I get some warning about "CSC something or other, fixing".
I have a short list of things to try before I have exhausted my DIY options -- the post just above looks promising.
I think the answer is out there. We just need to keep looking and keep attention on this thread and others like it. This place and others like it are a huge help and I'd like to solve it and then give back a good set of instructions.
FWIW: I wonder if there was some voodoo in the polish rom that caused some issues in the modem when a different than expected sim was installed? Or if one of those funky polish apps that updated it self before I could turn off auto-updates has something to do with it (doubt this -- I don't think apps can do stuff unless rooted...)...
Still searching....I got this other pesky problem to deal with now: w-o-r-k
Click to expand...
Click to collapse
I had that problem too, it doesn't detect that CSC and then goes ahead and applies something. Check to see if you are in 3e recovery, I think you are after having flashed vanilla JK1.
Re-flash Chainfire's rooted kernal for your appropriate version and then go back into recovery and it should be 3e and you can flash thru CWM then.
Also note; each time I flashed, I also wiped data/cache/davlik just to be sure.
yes it does say:
Code:
Android system recover (3e).
So I will need to try the methods you (crippenx) suggested.
FWIW, the CSC message that I get when I first enter recovery is:
Code:
# MANUAL MODE #
--Updating application...
Successfully update application.
--Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'TGY'
Sucessfully applied multi-CSC.
I have no idea what this means. It does it every time I enter recovery.
FWIW, I never flashed this gnote with ODIN (I have used ODIN on my SGT several times). I got to KK1 by first rooting via http://forum.xda-developers.com/showthread.php?t=1329360 (using 'forget the above steps') and then using the CWM 'kk1-wipe.zip' from here http://forum.xda-developers.com/showthread.php?t=1342797 -- I didn't use ODIN to get to kk1.
I see on the Root/Unroot thread, there is a KK1 kernel option for 'simple'. I think I will try that with rooted already script.
But I am open to any/all suggestions...
Code:
Baseband
N7000XXKJ6
Kernel
2.6.35.7-N7000ZSKK1-CL706440
[email protected] #2
Build Number
GINGERBREAD.ZSKK1
fwelland said:
whoa....
when I try that procedure (* # * # 1 9 7 3 2 8 6 4 0 # * # * ) I get a pretty empty screen...can't do much of anything...just some useless buttons on the bottom of screen when I select the menu button...
I think I recall seeing another number for doing a similar thing...
Click to expand...
Click to collapse
My rough guess is that the phone has a list of 'valid service menu options', and it cross references it with what is on the SIM card.
Once the phone decides it's not going to read your sim card, the service menu is blank. This is a real headache.
That's why once I set the 1700+2100 combo, and my phone boycotted my sim, I wasn't able to set it back.
That's really dumb, imho, to have a one way toggle like that. I'm fine for settings to enable/disable other settings, but for a setting to disable itself? ugh.
I would really like to know what's going on. I was planning on switching to AT&T before my next trip (which is soon) but I can't risk my phone glitching out like that during the trip.
Actually, the ROM is on my SD card so I guess it wouldn't be THAT horrible, but it's certainly not something I want to do. Perhaps we just need a way to flash back the modem.bin, assuming it's corrupted.
- Frank
Sorry typo on my part. You are in 3e recovery because of that base flash, now you need 2e recovery which you can get via chainfire's rooted kernel. His installation procedure runs a batch file that uses that zerg rush exploit which I gather is partially from gingerbreak. It was during this procedure that my baseband suddenly came back, my sim card finally detected.
Once that was done, I entered 2e cwm with volume up,power,middle button and did erase of data,cache,davlik and then flashed kk rom via zip file.
Sent from my GT-N7000 using XDA App
fwelland said:
yes it does say:
Code:
Android system recover (3e).
So I will need to try the methods you (crippenx) suggested.
FWIW, the CSC message that I get when I first enter recovery is:
Code:
# MANUAL MODE #
--Updating application...
Successfully update application.
--Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'TGY'
Sucessfully applied multi-CSC.
I have no idea what this means. It does it every time I enter recovery.
FWIW, I never flashed this gnote with ODIN (I have used ODIN on my SGT several times). I got to KK1 by first rooting via http://forum.xda-developers.com/showthread.php?t=1329360 (using 'forget the above steps') and then using the CWM 'kk1-wipe.zip' from here http://forum.xda-developers.com/showthread.php?t=1342797 -- I didn't use ODIN to get to kk1.
I see on the Root/Unroot thread, there is a KK1 kernel option for 'simple'. I think I will try that with rooted already script.
But I am open to any/all suggestions...
Code:
Baseband
N7000XXKJ6
Kernel
2.6.35.7-N7000ZSKK1-CL706440
[email protected] #2
Build Number
GINGERBREAD.ZSKK1
Click to expand...
Click to collapse
For me flashing all partitions via Odin worked (no pit file or repartition). Tried all sort of stuff from recovery first with no result.
I don't know what partition flash from Odin did the trick, but you could try Odin flashing a Modem separately and check if that works. If not try the rest?
Finally got back to this.
After much fusing I finally got KK1 and cwm working. It was odd, I had to re-run the whole root process again.
At that point I could apply the KJ6 modem w/o any problems (via cwm)
no dice!
Still dead!
Not sure where to go next???
Can some one provide a few details about flashing a modem,rom and/or kernel via ODIN? Perhaps that method will work....
fwelland said:
Finally got back to this.
After much fusing I finally got KK1 and cwm working. It was odd, I had to re-run the whole root process again.
At that point I could apply the KJ6 modem w/o any problems (via cwm)
no dice!
Still dead!
Not sure where to go next???
Can some one provide a few details about flashing a modem,rom and/or kernel via ODIN? Perhaps that method will work....
Click to expand...
Click to collapse
Oh when you flashed jk1 I assumed you did it the old way via Odin and the multiple files. That's how I did it and you're right, that may be what fixed it as when I used to brick my sgs and sgs2, it was always a full Odin flash of stock that brought it back from the dead
To flash in Odin put your phone in download mode. Fire up Odin. In csc point to csc file. In phone section point to modem and for PDA you point to the code file. Don't put anything for pit or bootloader and unchecked the repartition toggle.
Connect your phone and wait for Odin to detect it and show yellow in the status window. Press start and you're good to go. Hope this does it!
Sent from my GT-N7000 using XDA App
Related
Hi forum
I have a very unusual problem with SGS. Well, from the beginning.
My mobile operator, has given me the SGS (with Android 2.2).
So I decided to upgrade to version 2.2.1, possibly Cyanomod / draky's. I plugged the phone to the PC and step by step according to the tutorial:
- downloaded Odin3 1.7
- pitting 512
- Keis with drivers
- And of course the latest 2.2.1 I9000XWJS3
Fleshed this soft thanks odin. Telephone, everything installed, Odin wrote "PASS" and there was a reboot. There was a samsung logo and then black screen and light vibration from time to time. Zero response.
I learned about the "Recovery Mode " did reset the cache, etc. Reboot ... NOTHING. So stweirdziłem that you need to return to the previous firmware ... Now all my flash's finished in the same way: a black screen and a slight vibration.
I tried reaaaaly a lot of versions and nothing. I tried it once cyanonmod, darky's mod. And nothing. Somewhere on this forum, I found versions: Froyo (2.2) That does not bricks. Worked.
But, this is the ONLY version that can be installed and running.
But it is not so big problem. The problem arises when I put the SIM card. Phone lying on the table (in a place where I always had coverage in other phones) to lose coverage. To one or zero bars. Neither I can not get anywhere else, nor to call me you can not reach you.
But when I stretch out my SIM card, coverage remains. At least in the form of dashes. Of course, nowhere is this possible calling, but the phone displays one or sometimes four lines.
My question:
Could this be the fault of soft? What should I do if I can not change it? Return to factory settings is not possible because they get a black screen and a slight vibration. I have tried:
- changing soft to 2.2.1
- 3 button recovery
- flashed with the kernel
- w8 for over an hour! to give SGS time to install everything right
- reupdating soft for hundreds ways
- read all FAQs on forums...
I didn't "root"
althou I tried to ":update.zip" in recovery mode but it gives only new errors.
Anyone have any idea? Or I am doomed for Samsung service?
thx
And how about getting back to factory soft. I mean, the soft that come to me with the new phone?
Or these soft has been overwritten by the all flashe's I tried to install, and is unbeckupable?
maybe this will solve the signal problem?
swiechu said:
And how about getting back to factory soft. I mean, the soft that come to me with the new phone?
Not unless you saved it .
Or these soft has been overwritten by the all flashe's I tried to install, and is unbeckupable?
But off course .
http://forum.xda-developers.com/showthread.php?t=818556
Flash via Odin to Eclair then update to 2.2 via Kies and you should get original as the download .
jje
Click to expand...
Click to collapse
thx, I will try it tooday
JJEgan said:
swiechu said:
And how about getting back to factory soft. I mean, the soft that come to me with the new phone?
Not unless you saved it .
Or these soft has been overwritten by the all flashe's I tried to install, and is unbeckupable?
But off course .
http://forum.xda-developers.com/showthread.php?t=818556
Flash via Odin to Eclair then update to 2.2 via Kies and you should get original as the download .
jje
Click to expand...
Click to collapse
I downgrade to 2.1-upadate1 (I9000XXJM4). Still no signal with SIM card. But when I try to upgrade to 2.2 via Kies 2.0 and didn't have info about possible upgrade to 2.2. So I downloaded old version of Kies (1.5.1) and try to again with regedit tweek and now I get information: "This software verios you cannot update"
Tryied "Test mode ON" "Test mode OFF", still nothing....
Click to expand...
Click to collapse
You will have to continue and flash the stock rom 2,2,1 as per the posted link .
Sim card have you checked it works on another phone .
jje
Yes SIM card is working perfectly on another iphone 3gs and nokia c5-00.
Now I don't have time to do all these steps, but tomorrow I will contact my operator to service it or maybe change to new one.
And do you think the signal problem might be the soft foulty? I think it is somenthink more...
And thank you for all the help.
I tried to use ROM manager to update my rom to overstock, this did not work so well. It installed fine but then the battery refused to charge and all sorts of wierd problems so I used my backup to uninstall and that failed. I downloaded Odin3 v1.7 and downloaded the original stock firmware(eclair) and that failed. I then used UGJH2 and the phone will boot and see the galaxy s load but then the screen goes blank and vibrates periodically. in the recovery (3e) it says Can't mount /dev/block/st110. The last official firmware install was KC1 through kies but I can't find that anywhere is there any hope for this(sweating cause wife might find out)
I am also on sasktel and am an impulsive flasher (1-5 times daily) Heres an easy, fast fix. GO here:
http://www.darkyrom.com/community/index.php?threads/guide-installing-rc5-easy.2382/
go to section enabled "For GT-I9000 users only" and follow step by step. You can stop at step 2 if you want to leave your rom stock samsung or do last few steps to have darkys on there. EIther way once done you'll also have to enable the 850 band *#2263# then enable wcdma 850 option. Also you will have to manually enter your APN under network options. I use inet.stm.sk.ca for sasktel. Note that the Ficeto_JVB.zip download there includes all needed to flash (.pit file, rom, odin). THis is always my fail safe method after boot loops ( I always screw something up playing around lol).
ps: also depending how desperate you are and how trusting you are, I work at sasktels head office in the cornwall and if you wish I am sure I could take 15 mins out of my day tomorrow to do this for you, although you will not be able to get through security so you will have to trust me taking off with your phone lol. email me at [email protected] if needed.
trouble is I can't put things on SD card because I can't get it to load android
You won't be able to load eclair through Odin because JL2 installed a new SBL (secondary boot loader). Go to samfirmware.com, download JL2, and use odin to flash that. Once that's flashed it should fix your issues. Then, if you want a custom ROM, try the romkitchen (romkitchen.org).
problem solved!! turns out darkyrom did fix my phone, I couldn't push the zip file to my phone but their tar file got my phone working! Thanks for all the help
Dougustine said:
I tried to use ROM manager to update my rom to overstock, this did not work so well. It installed fine but then the battery refused to charge and all sorts of wierd problems so I used my backup to uninstall and that failed. I downloaded Odin3 v1.7 and downloaded the original stock firmware(eclair) and that failed. I then used UGJH2 and the phone will boot and see the galaxy s load but then the screen goes blank and vibrates periodically. in the recovery (3e) it says Can't mount /dev/block/st110. The last official firmware install was KC1 through kies but I can't find that anywhere is there any hope for this(sweating cause wife might find out)
Click to expand...
Click to collapse
I loled, I've been in the same boat, wife is always asking me why I always have to mess around with stuff. Shoulda seen her face after I soft bricked the phone the first time.
Just rooted my phone
I am new to this, I can do all kinda of things with my pc but with my phone a different story lol. I don't understand when you say "Eclair". Is that a different model or is that stock. I am too from sasktel.
Android 2.1 is Eclaire, 2.2 is Froyo and 2.3 is Gingerbread... Ice cream is next 4.0
hi guys, I know this is an old post but has anyone successfully unlocked their Sasktel i9000 vibrant without paying any unlock code service? has anyone tried anything like the SGS Unlock Pro that claimed to unlock all GSM galaxy S phones but did not list Sasktel? anyways, from the sound of it is Darky's rom currently the best for i9000's? I wanted to try CM9, so i did the super 1 click root and followed the CM wiki page to push clockwork recovery to the phone through Heimdall Suite but both times i tried failed and stuck in a boot loop so both times i ended up going through Odin to fix it. (super 1 click root didnt seem to stick b/c i lost superuser after fixing the phone w/ Odin, is that normal?)
anyways i had a very unique situation, originally had a Bell i9000m but died 1 week later tried to fix it numerous times for 7-8 months ( i live in U.S., and Sammy refuse to fix it b/c i dont have a canadian address they can send it back to b.s.) anyways finally landed myself a dead i9000m w/ broken screen, so i took both apart and put the working parts together. now 1 working phone with 3 problems: 1) so it seems that it's currently locked to Sasktel (it can be done but i'm curious if there is a cheaper way or even free) 2) CM wiki suggested Heimdall push CW recovery cause boot loop (some on xda suggested flashing the phone back to 2.2 (or 2.1??) first) 3) i was playing around and click on screen update and lose my touch keys ever since (ppl also suggest flashing it back to 2.1 and reupdate the keys, but will a bell i9000m 2.1 stock rom be compatible w/ the i9000m from Sasktel?)
anyways lots of questions there but if anyone can answer anyone of these would be greatly appreciated.
thanks in advance
Update: problem 1 is taken cared of. SGS Unlock Pro worked like a charm. tested, working. other 2 problem still unsolved.
Hi all, I have messed up my Galaxy Tab GT-P1000 (Aus-Optus-CDMA) trying to flash. I managed to get it going on the following FROYO.XXJME Version 2.2 Kernel 2.6.32.9 rootatSEI-28 #1
Unfortunately I did not do a full backup!
My problem is now,
1/ No imei shown
2/ No serial number shown
3/ Not recognize my sim card
4/ Tab reboots regularly
Have done the factory reset however I am not sure if due to my flashing is it the original rom?
I have the imei written but cannot get the Tab to find it, thus cannot connect to Kies to get the samsung updates which would fix things, "I think".
Can anyone help
Thanks
DanTanBjAj said:
Hi all, I have messed up my Galaxy Tab GT-P1000 (Aus-Optus-CDMA) trying to flash. I managed to get it going on the following FROYO.XXJME Version 2.2 Kernel 2.6.32.9 rootatSEI-28 #1
Unfortunately I did not do a full backup!
My problem is now,
1/ No imei shown
2/ No serial number shown
3/ Not recognize my sim card
4/ Tab reboots regularly
Have done the factory reset however I am not sure if due to my flashing is it the original rom?
I have the imei written but cannot get the Tab to find it, thus cannot connect to Kies to get the samsung updates which would fix things, "I think".
Can anyone help
Thanks
Click to expand...
Click to collapse
Did you flash with ODIN?
Did you get an error message?
Have you tried re-flashing to a stock ROM?
You should read through the following thread before flashing anything else
http://forum.xda-developers.com/showthread.php?t=888071&highlight=no+imei+after+flash
And you are correct in assuming that a factory reset would only re flash the ROM you "replaced" your stock ROM with.
Also remember that using the SEARCH button usually will get you a lot more answers than just waiting on a reply here.
Did you unlock the tab first, no network lock, no sim lock... If you didn't this may explain whats happened. Don't know how you're gonna fix though....
Your Gtab is also NOT a CDMA tab, its GSM as you use a sim card... You may have bricked it if you flashed a CDMA rom.... Lucky if it starts up at all...
You need to tell us more info, what rom you flashed, how you flashed it - ODIN, Heimdall , Kies or just by pure magic. Then you might get more help....
the /efs folder contains all information/numbers about your gt including IME, mac address, bluetooth,etc.. It may have been deleted yet there should be a bak file inside the folder. since you are able to boot as you mentioned then you can still go into download mode and reflash a ROM?
Hi "theREDlegion" & thanks for your time.
Yes I did flash with Odin.
I got a red FAIL in Odin & an error message, trying to remember what it said exactly.
I am not sure which is the correct ROM to use for me here in Australia, CSC file & Pit etc, I'm kinda new to this stuff.......as you guessed!
I rooted the Tab with z4root, then used the repair nv_data to unlock the network which was succesful, so it said by entering the code.
So will the "Gingerbread" ROM work on my Tab?
I tried P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar which failed.
Thanks again.
Hi ultramag69, appreciate your help.
I was installing a game when my Tab froze. No matter what I did I could not get it to respond. This is why I thought lets try & install Gingerbread. I managed to get it connected to the PC, however I am not sure if I did as you said "sim unlock". I did the network unlock. My Tab runs okay now but will loop boot when idol for 30 sec. I still whish to do Gingerbread if it is possible, or "overcome"
Thanks again.
Hi bongski55, thanks for your assisstance.
I have the backup of the efs & the files in it are dated 27/10/2010 which would indicate they are the originals. I have replaced the new efs files with these but still no change.
Not sure which file is the imei info though.
Here is my plan,
1/ Do factory reset - this will allow me to reroot
2/ Root the Tab & unlock network, learn how to unlock sim?
3/ Remove SD & SIM cards.
4/ Use Odin to flash with Gingerbread, I think I have the right ROM!
Wot u think!!!!!!!!!
Is your bootloader safe? Do you know what your original firmware version was ?
edit for my english: is "was" at the good place in the second sentence?
You've tried chainfire's safe rom, have you checked out the overcome thread, there's a safe rom you can install through ODIN there too... Might work. Also, do a search for Telstra rom, might take back to stock Froyo but with all the Telstra bloatware, I started on this.
After you take back to Froyo stock you can try again for GB. Can't say if this will work though as you have an Optus tab, mine was Telstra from the start...
Good luck...
Without restoring the efs folder CORRECTLY. All your efforts are futile. Follow this thread to restore /efs folder: http://forum.xda-developers.com/showthread.php?t=859914. Reboot your phone, Charge it and try flashing a stock ROM.
Some very helpful information has been posted here, thanks to the very helpful members of xda.
If I was in your shoes I would do the following:
1) Follow the link provided by DarkPal in post 10, complete the steps necessary to restore the efs folder.
2) Follow the link I provided in post 2 and confirm your bootloaders and take necessary actions to patch if necessary.
3) Your device (on Optus) should be WCDMA/GSM. I would go over the OVERCOME thread and follow instructions on flashing a stock safe rom and attempt to flash the OVERCOME rom. It is important to follow the instructions step by step for a successful flash. The OVERCOME guide is very detailed, if you follow it correctly you should not have any issues with the flash.
Do post back your results and good luck.
DarkPal said:
Without restoring the efs folder CORRECTLY. All your efforts are futile. Follow this thread to restore /efs folder: http://forum.xda-developers.com/showthread.php?t=859914. Reboot your phone, Charge it and try flashing a stock ROM.
Click to expand...
Click to collapse
Thanks for your help so far,
I have been able to find the backup of my efs/ which was created during unlock process.
Thank god.........I have now done this, patched bootloader.
1/ Used Overcome safe rom & flashed
2/ Flashed to Overcome "Jupiter" v3.3.0 & changed file system to ext4
3/ restored efs/
4/ My imei is now back to original....Yippee....also is my serial number.
Now when I boot it gives me full bars of service & Yes Optus on the screen..Great!
But I still canNOT connect. My Wifi works fine.
I notice my IMEI SV is now 05 but was originally 01.
I am not sure how to see what csc I have & don't know if it matters?
Any suggestions....
Cheers
Google "optus apn settings" and check yours (settings, wireless network, apn).
Check if wireless mode is auto.
What is your baseband (modem version)?
Because you see optus on your screen, your voice service is fine, but no data connection means your apn values are incorrect or missing.
theREDlegion said:
Some very helpful information has been posted here, thanks to the very helpful members of xda.
If I was in your shoes I would do the following:
1) Follow the link provided by DarkPal in post 10, complete the steps necessary to restore the efs folder.
2) Follow the link I provided in post 2 and confirm your bootloaders and take necessary actions to patch if necessary.
3) Your device (on Optus) should be WCDMA/GSM. I would go over the OVERCOME thread and follow instructions on flashing a stock safe rom and attempt to flash the OVERCOME rom. It is important to follow the instructions step by step for a successful flash. The OVERCOME guide is very detailed, if you follow it correctly you should not have any issues with the flash.
Do post back your results and good luck.
Click to expand...
Click to collapse
Good morning all, well I would like to thank everyone on this forum, particularly those who have promptly responded to my questions.
I am glad to say that after 3 days of stress I have finally got my Galaxy Tab back on the Optus Australia internet service, I had to change the APN from Optus (Internet) to Optus (connectcap) in the Access Point Names & also at the bottom of those settings I had to select Internet. The connectcap option is not there by default, you have to add a new APN & choose these settings. My sim card is a data plan only.
So I now have my Tab running Overcome Jupiter, thanks guys, love your work, on the ext4 file system and already it is noticably faster.
Now......probably a good time to do a proper backup......yep I'm learning!
So thanks again everyone.
So, I recently installed CM9 and on top of that SlimBean 2.6. Both worked otherwise perfectly, but I couldn't get my 3g connetion to work on either one, unless I turned "National Roaming" on. I checked the Acces Point Name settings, and they seem to be fine. I can't find my service provider on the Network operators list though. I read that a new modem migth do the trick, but I have no idea if that will help or which modem to choose.
I had a similar problem after going to CM9. I even had my APN (access point names) settings disappear randomly also.
Solution for me was to turn 'airplane mode' on....wait 30 seconds then turn off.
Strange as it sounds but it actually worked for me. But in the end, (after 1 day) I changed to samsungized 12.1 JB rom because I found that I had to use that airplane mode on/off alot and was too much of a pain.
Hope this helps.
If not, I'd revert back to a stock rom then upgrade to a stable JB rom
Tried just that, but no luck so far. Any other suggestions?
Taatero said:
Tried just that, but no luck so far. Any other suggestions?
Click to expand...
Click to collapse
Id recommend trying a good stable stock rom with a 512_pit repartition via Odin, just to see it it improves the modem or not.
The rom im going to suggest has a replacement Modem file within.
Might sort the problem.
Ive used this stock rom to fix my many problems ive had after custom roms.( Mainly format errors i had )
Its from 'HotFile' site and took me around 20 mins to download it.
But it might be worth the wait in your case.
Rom File:
http://hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
Here Is the Pit File and Odin version I used. ( 3rd box down the page )
http://forum.xda-developers.com/showthread.php?t=1102881
And heres the Root file. Get " CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS " :
http://forum.xda-developers.com/showpost.php?p=15188469
s1_odin_20100512.pit Goes in PIT ( repartition checked )
CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 Goes in PDA
GT-I9000-CSC-MULTI-OXAJVU.tar.md5 Goes in CSC
MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 Goes in phone
Sorry if im telling you what you already know with how to use Odin, just making sure.
After rom install pop this root on with Odin via download mode.
CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS goes in PDA
I reckon its worth a shot.
Must make sure the 3 wipes are done before the rom install. I learned this the hard way and messed my
phone up for a while.
Problem solved! I did some googling around, and found a solution. Apparently my carrier, Saunalahti, is known for having problems with 3g on custom roms. I found out that a nexus s modem by the name of i9020AUCKF1 might work. And sure enough, it did the trick! No more roaming! Anyway, thanks for taking the time to help me!
I attempted to restore a backup via CWM and now I get the message E: unknown volume for path" in response to any options in CWM. If I try to reboot normally, I just get the SGS splash screen, which just stays there.
I can't get to the Download screen with the three keys, this just gets me back to CWM. So I feel pretty screwed now. I could order a jig but will it even work in these circumstances?
The sequence of events that led to this was that I followed the instructions here to install Jellybean 4.2. All went well, Jellybean was running very smoothly from this rom. The trouble was that I just couldn't get it to find any mobile networks at all, even when I manually entered the APN and VPN etc. My sim is a giffgaff one, which uses the O2 network, and you do have to add the APN to get the 3g to work - but the phone just wasn't seeing any networks at all. I presume this was because this version of the rom just doesn't recognise UK carriers.
So anyway, I then went into CWM to restore my last backup, which was from over a year ago. This all appeared to work but then it got as far as the SGS splash screen, as described above, and stayed there.
What else can I try?
Well, I did manage to get a Download screen in the end, although Odin running on my Win 8 desktop couldn't see the phone. However, I then put Odin on my netbook running Win XP and that can see it.
So I'm now ready to flash a stock rom to the phone. I've tried following PuggeredUK's guide to installing a stock rom, which I've used successfully in the past, but he does say you need a .pit file. I've tried loading a stock 2.3.4 and 2.3.6 value (which was the last stock firmware I had on the phone) roms from Sammobile but can't find any .pit files in any of the stock roms I've downloaded from there.
So are .pit files actually necessary? I tried sending one file to the phone and Odin said "Failed", so I thought I'd better check about the .pit files before further buggering up my phone.
I had this same problem too when I restored my backup. I got it fixed by just going back to the ROM what I had before I tried to restore. (which was CM10).
Do what I just told this guy in post #7
http://forum.xda-developers.com/showthread.php?p=38194645
Edit: and you lost your network because you flashed from GB to JB, missing out ICS. Nothing to do with the rom and uk carriers. Next time install ICS first.
Sent from my GT-I9000 using Tapatalk 2