So i buy New Micro SDHC Card for my LG Optimus 2X SanDisk 16GB Class 4
So basicly i put the card in phone but nothing happend on sd card screen total space available space are "unvailable"
I put sd card on my other phone - very old nokia and the card worked ........
Is there any salution about this ?
KrisPK said:
So i buy New Micro SDHC Card for my LG Optimus 2X SanDisk 16GB Class 4
So basicly i put the card in phone but nothing happend on sd card screen total space available space are "unvailable"
I put sd card on my other phone - very old nokia and the card worked ........
Is there any salution about this ?
Click to expand...
Click to collapse
I have the exact same problem, my 16GB Class 10 is not showing up on my phone, the memory card is formatted on FAT32, does it need to be formatted on to something different?
After formatting my SD card on my phone AND on my laptop it now works
i read about microsd class 4 somewhere in xda optimus 2x forum is problem in this phone.
I have the exact same problem, my 16GB Class 10 is not showing up on my phone, the memory card is formatted on FAT32, does it need to be formatted on to something different?
Click to expand...
Click to collapse
for class 10 i don't have problem. i use 32gb class 10 and it's directly show up on the phone. do you shutdown your phone first when mounting the microsd?
Related
hello! I just bought a memory card, SD for my Hp pocket pc. 4gb. my phone can't read the memory card. I think it's too large. what can I do? a smaller one was ok. help please! what can I do?
Your card probably has a SC on it and these phones can't handle SC. I have a 4Gb card that isn't SC and it works fine.
try 4GB SD card not SDHC card.
Not a big problem but I cannot seem to flash with my 16GB microsd. My 8GB works fine. Anyone has similar issues or knows the solution? It can be troublesome to swap cards when flashing...
I have no problem flashing from my Sandisk 16GB card. Did you try reformatting the card (FAT32!) ?
I'm using a sandisk 16GB microSD card as well, and have no problems flashing from it. What brand is your microsd card? Then again, doesn't matter in your case, as you already bought it, but for the rest of us it might be important, so that we can stay clear of that brand.
I have the same problem mate, I could flash a few times at the beggining, from then, I have not been ablo to do so, I already tried formatting it to FAT32, erase all files and jut leave a blacimg.nbh file in it and it did not worked anyway.
doctorcete said:
I have the same problem mate, I could flash a few times at the beggining, from then, I have not been ablo to do so, I already tried formatting it to FAT32, erase all files and jut leave a blacimg.nbh file in it and it did not worked anyway.
Click to expand...
Click to collapse
Same here for me
Kingston 16 GB also SanDisk 16 GB.
After some flashes it stoped working, allways shows no imagefie
worked fine
- 16gb , 2gb
didnt work
- 2x 8gb and a 1gb
but i never sorted out why they wouldnt work even after re formating
I bought one week ago a new micro SD card 16Go Class 6 from Transcend...
And I have the same problem, which is not really a problem.
I use my old 8Go card for flashing.
I read few months ago that we can't flash the touch HD from anyone micro SD card. I don't know why ?
info : Transcend micro SD 16Go FAT32 32-Kilo
if you count free space on empty cards, transcend 8gb and sandisk 8gb will show 8gb but differnt values if you look in details
seems different layout of partitions for different vendors
flashing from sandisk is always OK
transcend = no go
I am using Sandisk 16gb class 6. My other 8gb sandisk class4 & kingston class 6 works fine...
Can flash but UC does not work
I can flash using my 16 gbyte Sandisk but I cannot get UC to work. I either get an error saying the cabs cannot be located or it just hangs. Anyone else see that particular problem?
Z
Transcend are BAD. They seem to have real problems with large files such as ROM Images and MemoryMap data files.
I have bought Sandisk microSDXC 64GB class 10 UHS1. When I put it in my computer using USB2.0 Kingston Mobile Reader it could not recognise it. I removed it and I placed it in my Galaxy Note. I went into clockworkmod 6.19 (Non Touch) and I partitioned the card with 2GB or 4GB (I do not remember exactly!!!) and Swap size 256k. When my phone restarted, the phone did not recognize the card. Therefore, I went through the internet to find a solution. I found the program "EaseUS Partition Master 9.1.1 Home Edition" and reformatted the card with FAT32 and cluster size 32KB. When it finally finished, it gave me the size 27.46GB!! I reformatted through SD Formatter 3.0 hoping that the partition used through Clockworkmod messed up the actual size of the card. I successfully re-formatted the card, however the size remained the same. I know that the size of a microSDHC card 32GB is around 29GB, therefore it does not explain size 27.46GB.
My question now, if there is an answer!!! Is the card faulty or did Clockworkmod messed with the card?
Please advise if possible!
Thank you very much for taking the time to read this, because I think this a very strange story!
Wrong section.
Have you tried formatting the card with your phone?
Settings > Storage (Scroll to the bottom)
Make sure to pick the correct one.
Haralambos Lambrianides said:
I have bought Sandisk microSDXC 64GB class 10 UHS1. When I put it in my computer using USB2.0 Kingston Mobile Reader it could not recognise it. I removed it and I placed it in my Galaxy Note. I went into clockworkmod 6.19 (Non Touch) and I partitioned the card with 2GB or 4GB (I do not remember exactly!!!) and Swap size 256k. When my phone restarted, the phone did not recognize the card. Therefore, I went through the internet to find a solution. I found the program "EaseUS Partition Master 9.1.1 Home Edition" and reformatted the card with FAT32 and cluster size 32KB. When it finally finished, it gave me the size 27.46GB!! I reformatted through SD Formatter 3.0 hoping that the partition used through Clockworkmod messed up the actual size of the card. I successfully re-formatted the card, however the size remained the same. I know that the size of a microSDHC card 32GB is around 29GB, therefore it does not explain size 27.46GB.
My question now, if there is an answer!!! Is the card faulty or did Clockworkmod messed with the card?
Please advise if possible!
Thank you very much for taking the time to read this, because I think this a very strange story!
Click to expand...
Click to collapse
How sure you are that your Kingston reader is SDXC compatible? If it's not, it can be that your card is damaged now and can't be fixed (I had that issue). Second thing you should have format the card using some exFAT compatible ROM (for example XLS7 or XLSA) in storage section of the phone, not in CWM.
You should also check if there isn't any other partitions on the card using EaseUS Partition Master. I would delete all partitions on the card and then format using exFAT. But it would work only if the card isn't already damaged by incompatible reader.
If you search abit you will find that sdxc cards used with sdhc reader can be damaged. google it you will find it.
Sent from my GT-N7000 using Tapatalk 2
Format it with the phone. That usually gets it.
I have bought Sandisk microSDXC 64GB class 10 UHS1. When I put it in my computer using USB2.0 Kingston Mobile Reader it could not recognise it. I removed it and I placed it in my Galaxy Note. I went into clockworkmod 6.19 (Non Touch) and I partitioned the card with 2GB or 4GB (I do not remember exactly!!!) and Swap size 256k. When my phone restarted, the phone did not recognize the card. Therefore, I went through the internet to find a solution. I found the program "EaseUS Partition Master 9.1.1 Home Edition" and reformatted the card with FAT32 and cluster size 32KB. When it finally finished, it gave me the size 27.46GB!! I reformatted through SD Formatter 3.0 hoping that the partition used through Clockworkmod messed up the actual size of the card. I successfully re-formatted the card, however the size remained the same. I know that the size of a microSDHC card 32GB is around 29GB, therefore it does not explain size 27.46GB.
My question now, if there is an answer!!! Is the card faulty or did Clockworkmod messed with the card?
Please advise if possible!
Thank you very much for taking the time to read this, because I think this a very strange story!
Haralambos Lambrianides said:
I have bought Sandisk microSDXC 64GB class 10 UHS1. When I put it in my computer using USB2.0 Kingston Mobile Reader it could not recognise it. I removed it and I placed it in my Galaxy Note. I went into clockworkmod 6.19 (Non Touch) and I partitioned the card with 2GB or 4GB (I do not remember exactly!!!) and Swap size 256k. When my phone restarted, the phone did not recognize the card. Therefore, I went through the internet to find a solution. I found the program "EaseUS Partition Master 9.1.1 Home Edition" and reformatted the card with FAT32 and cluster size 32KB. When it finally finished, it gave me the size 27.46GB!! I reformatted through SD Formatter 3.0 hoping that the partition used through Clockworkmod messed up the actual size of the card. I successfully re-formatted the card, however the size remained the same. I know that the size of a microSDHC card 32GB is around 29GB, therefore it does not explain size 27.46GB.
My question now, if there is an answer!!! Is the card faulty or did Clockworkmod messed with the card?
Please advise if possible!
Thank you very much for taking the time to read this, because I think this a very strange story!
Click to expand...
Click to collapse
I think that the CWM messed up with the SD partition. Try to format in Windows ad tell me the results.
if I'm correct 32gb is the max for the n7000. Note II does up to 64gb
Nope. I have the same card and it shows me all of the space(about 59gb) and i juat put it in the phone.
Sent from my GT-N7000 using xda premium
heat22 said:
if I'm correct 32gb is the max for the n7000. Note II does up to 64gb
Click to expand...
Click to collapse
Nopes.
I got the same as him
v
v
v
mR.fR34ky said:
Nope. I have the same card and it shows me all of the space(about 59gb) and i juat put it in the phone.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Ugh thats why i hate partitioning that kind of stuff, it messes your sd card.
_______________
via GT-N7OOO using XDA-Elite App
Could you have gotten a counterfeit card
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Arobase40 said:
+1
Could be the reason OR the Card Reader may not be compatible with SDXC...
I got a Transcent dual (micro and standard Card reader) which works fine while some others incompatible.
Once he got the good card reader, he should try to format first the SDXC as exFat (on Windows 7) to be sure he got 64GB, then to get it work on the G-Note is another story...
I had to copy some files (any kind) on the card, then when plugged on the G-Note, the system detect an issue and propose to format the card (watch carefully at the messages)... When done, all is good !
Click to expand...
Click to collapse
Thank you for your answers! I have no solution, but I sent the card for a replacement and Im getting a Sandisk USB 3.0 Reader, so as soon as check I will inform with the results!
Hello,
I damaged my data partition due to the EMMC bug last month while installing CM10 by Ivendor.
Now I'm trying to use the CM10 RC2 by Ivendor and accompanying patch to use the data partition on the external sdcard, but I can't get my phone to boot properly.
This is what I did:
1) installed CWM 6.0.2.8 from Ivendor post
2) Format a 32 GB external SD with 1 partition FAT32 and a second partition EXT4 of 4GB
3) Installed the newly updated CM10 RC2 from Ivendor (success)
4) Installed the "Patch for EMMC data partition broken devices" from Ivendor (success)
At this point I reboot the device and after the "SAMSUNG" and the "Samsung Galaxy s plus, cyanogenmod" splash screens, I see the the spinning circle with cyanogenmod at the center. But it does not go further.
Please can any good soul tell me what am I doing wrong?
I flashed only files from original Ivendor thread:
http://forum.xda-developers.com/showthread.php?t=2000828
EDIT
I got to the home screen but I get "Damaged SD card" message and phone shuts down
Ok,
after I cleared cache/dalvik cache, fixed permission and reinstalled a few times, I managed to get to the home screen but I get the message SD CARD DAMAGED and it it shuts down.
I'm using a 32GB class 4 card.
I've checked it a few times for errors on the PC. I've reformatted it a few times. I've also tried with another class 4 card. But the result is the same.
I assume class 4 is not good enough.
I bought a new class 10 card but I will get it next week.
Ok,
now I have a brand new Samsung SD Card class 10 but I still get the same message SD CARD DAMAGED few seconds after I get to the home screen and the phone switch off.
Does anybody have any idea why?
are the formattet partitions primary?
Lei M said:
are the formattet partitions primary?
Click to expand...
Click to collapse
Yes, both partition have been formatted as primary.
The brand new SD card is a SAMSUNG class 10 plus UHS-I 32GB. The previous one was Transcend 32GB class 4. And I also tried a Kingstone class 4 2GB.
Anyway I get to the Android home screen for 30 seconds before it checks the SD for errors and shuts down.
Any idea?
hydeh24 said:
Yes, both partition have been formatted as primary.
The brand new SD card is a SAMSUNG class 10 plus UHS-I 32GB. The previous one was Transcend 32GB class 4. And I also tried a Kingstone class 4 2GB.
Anyway I get to the Android home screen for 30 seconds before it checks the SD for errors and shuts down.
Any idea?
Click to expand...
Click to collapse
maybe the problem is not the ext SD but the internal... or the card reader, it's quite impossible that you have 2 "old" sd card damaged and a brand new one damaged too
ktulu84 said:
maybe the problem is not the ext SD but the internal... or the card reader, it's quite impossible that you have 2 "old" sd card damaged and a brand new one damaged too
Click to expand...
Click to collapse
Ok. Please how do I check the internal SD card for errors? Or how can I reformat it to start clean?
I don't know, maybe in recovery?
Sent from my GT-I9001 using xda app-developers app
Ok, I've tried with other external SD cards (working in other phones) and I get always the same result when I try to use them on min: SD CARD DAMAGED.
My issue is probably not related to my external SD card. But I have no clue what could be wrong. Any idea?
I think that it could be your card reader or your internal SD card... You can send to Samsung
Inviato dal mio GT-I9001 con Topatalk 2
I gave up and sent it to service.
Thanks for support anyway.