[Q] xRecovery menu when turning the phone on while charging? - XPERIA X8 Q&A, Help & Troubleshooting

If I start charging the phone when it's turned off, the xRecovery menu appears as soon as I turn it on. Is there a way to fix this? I've searched the forums and I've seen a couple of people mentioning this minor issue, but couldn't find a solution.
The phone is an E15a that went from 2.1.1.A.0.6 (base 15) to FroyoBread v023b and now to GingerDX v019.
I got xRecovery from this thread http://forum.xda-developers.com/showthread.php?t=878426 and I installed CWM-recovery-4.0.1.5-e15-Amend.zip for upgrading FroyoBread to the latest GingerDX.
It's just a minor annoyance, but I wonder if I there is a way to fix this. The missus freaks out when she gets the strange menu.

Lol, I get the same. Here:
Phone is off.
I connected charger.
Phone turns on to the battery picture.
I hold lock button down.
Then FreeXperia recovery mode opens up.
I just click reboot and its fine.
But I though GingerDx only came installed with CWM and xRecovery.
I never installed FreeXperia recovery mode.
Lol.
Anyway, its weird.
Sent from my X8 using xda premium

Freexperia recovery is the same as xrecovery
Sent from my X8 using XDA App

You get this if you have Dual-Mode-recovery,because then any hardware button lets you boot intoe the FXp recovery.
Unfortunately, you cant power your phone off with FXP-recovery, what is a bit annoying, because then you have to boot to CWM to power the phone off, or you boot Android and let the phone charge while it´s on.

I had this problem in stock ROM, but i solved it by following the instructions in this thread: http://forum.xda-developers.com/showthread.php?p=12186828

IrishStuff09 said:
Lol, I get the same. Here:
Phone is off.
I connected charger.
Phone turns on to the battery picture.
I hold lock button down.
Then FreeXperia recovery mode opens up.
Click to expand...
Click to collapse
Yep, that's it. I don't mind getting the "battery picture" when I plug in the charger. What's annoying is that I land in the xRecovery menu when I want to turn my phone on. It's just a minor thing, I just have to select "reboot" from the xRecovery menu, but still...
codfreak said:
You get this if you have Dual-Mode-recovery,because then any hardware button lets you boot intoe the FXp recovery.
Click to expand...
Click to collapse
I got the same problem when I was only on FroyoBread v023b. At that point I had only xRecovery. CWM came much later when I wanted to install GingerDX v019.
_Sparks said:
I had this problem in stock ROM, but i solved it by following the instructions in this thread: http://forum.xda-developers.com/showthread.php?p=12186828
Click to expand...
Click to collapse
dbts25 says it's only for a stock firmware, so I wonder if I can use it on my GingerDX v019.
Since all the newer ROMs need only CWM, is there a way to uninstall xRecovery and keep only the current version of CWM I have?

elguaxo said:
Since all the newer ROMs need only CWM, is there a way to uninstall xRecovery and keep only the current version of CWM I have?
Click to expand...
Click to collapse
GingerXperia V13 and V14 still likes to be installed using xrecovery.
Keep xrecovery you'll never know when you need it.

elguaxo said:
dbts25 says it's only for a stock firmware, so I wonder if I can use it on my GingerDX v019.
Click to expand...
Click to collapse
It can be fixed by moving one line in chargemon to another position. If you will compare chargemon from GingerDX and the one I have uploaded you will see difference. Make backup in recovery first, because if something is wrong it will brick your phone, then replace chargemon in /system/bin with this one from archive and don't forget to set permissions. I haven't tested it (I can't install GingerDX now), but it should work.

dbts25 said:
It can be fixed by moving one line in chargemon to another position.
Click to expand...
Click to collapse
Awesome, it works! The line was: /system/bin/charger
Thanks a lot.

Related

[q] hard brick after downgrading to cm7.x again after cm9.x

so after a new update to the cm9 i found my phone a bit slow, so i decided to downgraded it to the latest cm7 version with the matching alf kernel. after the downgrade i found my phone acting very strangely.
after turning it on, the kernel and cm logo goes on, then it turns itself off, then again, again and again until the battery drains. i cant even go into recovery mode, so i cannot use my phone obviously.
can you help me with some advice?
thx
minic13 said:
so after a new update to the cm9 i found my phone a bit slow, so i decided to downgraded it to the latest cm7 version with the matching alf kernel. after the downgrade i found my phone acting very strangely.
after turning it on, the kernel and cm logo goes on, then it turns itself off, then again, again and again until the battery drains. i cant even go into recovery mode, so i cannot use my phone obviously.
can you help me with some advice?
thx
Click to expand...
Click to collapse
charge you battery with wall charger and
repair phone with PCC :good:
fotak-x said:
charge you battery with wall charger and
repair phone with PCC :good:
Click to expand...
Click to collapse
this dowsnt work due to the constant switching on and off
minic13 said:
this dowsnt work due to the constant switching on and off
Click to expand...
Click to collapse
Connect your phone is flashing mode by:
1. Keep ur mobile connected to the pc all the times.
2. Remove the back cover and the battery.
3. Wait for 10-15 seconds.
4. Press and HOLD the back button while putting the battery back in.
5. Launch PCC.
If this didnt work out, try to shortcircuit ur phone(it wont damage the hardware) by a dc charger.
Flash naa ics kernel back, then go to recovery and format data and system then you flash alfs kernel
Sent from my Nexus 7 using xda app-developers app
minic13 said:
so after a new update to the cm9 i found my phone a bit slow, so i decided to downgraded it to the latest cm7 version with the matching alf kernel. after the downgrade i found my phone acting very strangely.
after turning it on, the kernel and cm logo goes on, then it turns itself off, then again, again and again until the battery drains. i cant even go into recovery mode, so i cannot use my phone obviously.
can you help me with some advice?
thx
Click to expand...
Click to collapse
not going to recovery in alfs &nAa kernel is "IMPOSSIBLE"
Both kernels include recovery so it should go to recovery .......
Reflash kernel / then full wipe {(important)+dalvik & system wipe}
U must always wipe when u upgrade or downgrade form ics/jb (cause whole system is different)
GoodLuck - Happy holidays
Sent from my iXperiA 8s using Tapatalk 2
jay-z-s said:
not going to recovery in alfs &nAa kernel is "IMPOSSIBLE"
Both kernels include recovery so it should go to recovery .......
Reflash kernel / then full wipe {(important)+dalvik & system wipe}
U must always wipe when u upgrade or downgrade form ics/jb (cause whole system is different)
GoodLuck - Happy holidays
Sent from my iXperiA 8s using Tapatalk 2
Click to expand...
Click to collapse
"then it turns itself off, then again, again and again until the battery drains. i cant even go into recovery mode"
this is what the OP said.....if the phone reboots even before entering recovery then he cannot recovery...
and under some circumstances phone wont enter recovery... one is to be on ics on oxydo kernel and then flash back alfs with the ics rom... try entering recovery.. it will reboot.
minic13 said:
so after a new update to the cm9 i found my phone a bit slow, so i decided to downgraded it to the latest cm7 version with the matching alf kernel. after the downgrade i found my phone acting very strangely.
after turning it on, the kernel and cm logo goes on, then it turns itself off, then again, again and again until the battery drains. i cant even go into recovery mode, so i cannot use my phone obviously.
can you help me with some advice?
thx
Click to expand...
Click to collapse
it happens commonly, Use sony update service.
it's best to be used here.
u will get the stock software, then u can upgrade properly.
Wish U Luck
CnC-ROCK said:
"then it turns itself off, then again, again and again until the battery drains. i cant even go into recovery mode"
this is what the OP said.....if the phone reboots even before entering recovery then he cannot recovery...
and under some circumstances phone wont enter recovery... one is to be on ics on oxydo kernel and then flash back alfs with the ics rom... try entering recovery.. it will reboot.
Click to expand...
Click to collapse
READ this line again :
minic13 said:
after turning it on, the kernel and cm logo goes on, then it turns itself off
Click to expand...
Click to collapse
Rom logo appears then loop
So ?
Sent from my iXperiA 8s using Tapatalk 2
Edited
jay-z-s said:
READ this line again :
Rom logo appears then loop
So ?
Sent from my iXperiA 8s using Tapatalk 2
Edited
Click to expand...
Click to collapse
it's not hard brick.
Just try once Sony updating service......!!!!!!
Raj Rohit said:
it's not hard brick.
Just try once Sony updating service......!!!!!!
Click to expand...
Click to collapse
Yea, surely it's not hardbrick
Hard brick turns phone into a brick! Not turns on at all
I think It will fix by really flashing kernel
Sent from my iXperiA 8s using Tapatalk 2
jay-z-s said:
Yea, surely it's not hardbrick
Hard brick turns phone into a brick! Not turns on at all
I think It will fix by really flashing kernel
Sent from my iXperiA 8s using Tapatalk 2
Click to expand...
Click to collapse
Good Luck...!!!!!!!!!

X8 froce closing everything and cannot open xrecovery. Need help

Hello friends.
Now I am with 2.2 cyanogen mod. I wanted to install FroyoBread.v23b so I put this folder into sd card and with oldest one xrecovery I tried to install it but it showed some error. So I decided to install other xrecovery "Bin4ry & Androxyde" OS Version 6.1. but after that I even cannot open xrecovery and when the phone loads up it starts to force closing everything so I cannot do anything.
Any ideas what to do? Please I really need a phone :/
...
Use PC Companion to restore the state of the factory and redo everything from scratch.
Use x8toolbox & get CWM & flash froyobread
:flipoff2: DEVILS NEVER CRY:flipoff2:
BenasJ said:
Hello friends.
Now I am with 2.2 cyanogen mod. I wanted to install FroyoBread.v23b so I put this folder into sd card and with oldest one xrecovery I tried to install it but it showed some error. So I decided to install other xrecovery "Bin4ry & Androxyde" OS Version 6.1. but after that I even cannot open xrecovery and when the phone loads up it starts to force closing everything so I cannot do anything.
Any ideas what to do? Please I really need a phone :/
Click to expand...
Click to collapse
use PC Campanion (the best way) to repair your phone its super clean and clutter free!
original latest 2.1.1 by Sony officially
or
Use flash tool (The fast Way) to repair your phone really quick and need to search
for the firmware of the original 2.1.1 and flash it by using flash tool
you can find the firmware in Gogeta's Signature,download it.
if u want to roll back your phone into 2.1 download this ftf file
or x8toolbox
and do clean flashing on kernel and ROM
dont forget to factory reset, wipe dalvik cache, and wipe batery stats
if u want install cwm use search button..n u will find topic about installing CWM
In both situations I get stuck in the same situation when I need to unplug the device, turn it off and while holding back button plug the usb cable again. Then nothing happens, phone starts as usual and starts showing many "force close" errors
BenasJ said:
In both situations I get stuck in the same situation when I need to unplug the device, turn it off and while holding back button plug the usb cable again. Then nothing happens, phone starts as usual and starts showing many "force close" errors
Click to expand...
Click to collapse
Installing CWM by x8toolbox doesn't need flashmode
:flipoff2: DEVILS NEVER CRY:flipoff2:
BenasJ said:
In both situations I get stuck in the same situation when I need to unplug the device, turn it off and while holding back button plug the usb cable again. Then nothing happens, phone starts as usual and starts showing many "force close" errors
Click to expand...
Click to collapse
That happened with me too on froyobread..
The only option was to repair it with flashtools
sent from my phone using hands and brain...
Hi,
first of all, follow this tut to go back to clean 2.1 eclair.
Now you know what to do, root,xrecovery etc...
Reboot to xrecovery and FULL WIPE before installing the rom.
No more forse closing :good:
If it didn't work, try to full wipe after the installation(on xrecovery).
Be pleased. I get my phone recovered. Thanks a lot!!! It's now again 2.1. So now I know how to recover it, but just say your opinion - Basically what I need is not so stupid x8 blue color and function which allows to move apps to sd card. Is it worth to write some higher ROM again?
BenasJ said:
Be pleased. I get my phone recovered. Thanks a lot!!! It's now again 2.1. So now I know how to recover it, but just say your opinion - Basically what I need is not so stupid x8 blue color and function which allows to move apps to sd card. Is it worth to write some higher ROM again?
Click to expand...
Click to collapse
Of course it worths, if it doesn't then why are we here?!
Try what i wrote above.
Now that you know how to recover your phone from softbrick you have nothing to fear, except from hard brick ( this may happen while trying to unlock the bootloader)
Why I am saying that is because now, with original stock rom it works very fast without lagging compared with cyanogenmod 2.2 version which I had before. So Just few more questions - Its just your opinion, I know that there are so many Roms but for you which one is the fastest one and the most stable?
And maybe it's possible to install this Rom with same flashtool?
BenasJ said:
Why I am saying that is because now, with original stock rom it works very fast without lagging compared with cyanogenmod 2.2 version which I had before. So Just few more questions - Its just your opinion, I know that there are so many Roms but for you which one is the fastest one and the most stable?
And maybe it's possible to install this Rom with same flashtool?
Click to expand...
Click to collapse
I can suggest you cm7 roms as they are smooth, bugfree and may have all the features you are looking for.
In order to install a rom on xperia x8 you need cwm or xrecovery(in most cases cwm), and this depends on the rom you are trying to install. To deside what recovery to use just read the installation instructions at the rom thread. So no, you can't install a rom with flashtool.
Everything is clear. Thanks a lot

[Q] Sony Ericsson text won't disappear

hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
repair it with PCC
Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
BlackRabbit1703 said:
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
Click to expand...
Click to collapse
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Xaverek said:
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Click to expand...
Click to collapse
download
driver x8
gordon gates
install driver from C:\Flashtool\Driver
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
It's just soft brick so you should have flashtool and some ftf files for your device maybe stock firmware and baseband update so you can unbrick your soft bricked device for any time. Just enter the flash mode and flash it! That's it! Just some advice for you
PS. Don't say thanks. Click "Thanks"
Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
well done dude! :good:

[Q] Bricked Xperia X8 (E15i) HELP!!! May be hard brick

Okay please help. I have an unlocked bootloader (or had an unlocked bootloader) on my X8, it was rooted as well. I decided I'd like to get a custom Rom so I attempted to install GingerDX. I installed Clockwork Recover mod and tested it out to see if it was working. It was so I decided to back the phone up. The back up worked fine and I moved the backup to my computer. Then I restarted the phone to install the GingerDX rom. I cleared all the user data and I then went to install a zip file then chose the zip file. The installation completed so I pressed the back button and it said something about it being unsafe and that I will have no backup but I thought it was going to be fine as I had a backup of the kernel and the system on my computer.
I decided to ignore the warning as the installation said it was completed as well. But when I rebooted using Clockwork recovery mod the phone was stuck on the Sony Ericsson loading screen and was for around 10 minutes before I turned it off by removing the battery. I tried to enter the flash mode and reinstall the kernel on to the phone through flashtool but this failed and after that I can't seem to enter flash mode at all.
Please, is there any way for this to work? I'm guessing it's a hard brick but is there anything that I could try to fix it considering I have a system backup and the stock kernel backup as well? Anything will be greatly appreciated and rewarded.
it looks like you're on stock kernel. custom kernels do not show the se logo (haven't encountered one that does and i've tried quite a lot). are you sure you unlocked your bootloader? if you did, you haven't flashed a custom kernel yet.
don't worry it's only a soft brick. try using seus, pcc, or flashtool to recover it and go back stock rom. flash the rom, not the kernel.
did you download the stock kernel version of gdx? if not, that's probably why you encountered a bootloop.
edit: you also need to wipe dalvik cache and do a full wipe before flashing a rom
Just because i don't doesn't mean i can't.
cascabel said:
it looks like you're on stock kernel. custom kernels do not show the se logo (haven't encountered one that does and i've tried quite a lot). are you sure you unlocked your bootloader? if you did, you haven't flashed a custom kernel yet.
don't worry it's only a soft brick. try using seus, pcc, or flashtool to recover it and go back stock rom. flash the rom, not the kernel.
did you download the stock kernel version of gdx? if not, that's probably why you encountered a bootloop.
edit: you also need to wipe dalvik cache and do a full wipe before flashing a rom
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Thanks a lot for the suggestion and I'm pretty sure I got the stock kernel version. Just in case I didn't can you send me a link if possible? Also I am on the stock kernel, I unlocked the bootloader but didn't bother flashing the kernel.
I've already tried PC Companion but I don't understand how to use it considering the phone actually cannot boot so I can't choose to connect the phone etc. Also I can't enter the clock work recovery mod anymore or the flash mode.
J_T_ said:
Thanks a lot for the suggestion and I'm pretty sure I got the stock kernel version. Just in case I didn't can you send me a link if possible? Also I am on the stock kernel, I unlocked the bootloader but didn't bother flashing the kernel.
I've already tried PC Companion but I don't understand how to use it considering the phone actually cannot boot so I can't choose to connect the phone etc. Also I can't enter the clock work recovery mod anymore or the flash mode.
Click to expand...
Click to collapse
just download the stock rom for x8 and flash it using flashtool. you do need pcc installed for that anyway.
well, i believe you when you say you have gdx's stock kernel version. maybe it's just that you didn't wipe cache, dalvik cache, and full wipe before flashing it?
just a Q though. why not flash a custom kernel? it makes a huge difference.
btw here's the link for stock: http://goo.im/devs/TeamFun/GingerDX/GingerDX-v031b-shakira-stock.zip
edit: you need to flash the stock se rom first to get out of the bootloop. then reroot you phone, install cwm, reboot to recovery and wipe, flash the rom. :thumbup:
Just because i don't doesn't mean i can't.
cascabel said:
just download the stock rom for x8 and flash it using flashtool. you do need pcc installed for that anyway.
well, i believe you when you say you have gdx's stock kernel version. maybe it's just that you didn't wipe cache, dalvik cache, and full wipe before flashing it?
just a Q though. why not flash a custom kernel? it makes a huge difference.
btw here's the link for stock: http://goo.im/devs/TeamFun/GingerDX/GingerDX-v031b-shakira-stock.zip
edit: you need to flash the stock se rom first to get out of the bootloop. then reroot you phone, install cwm, reboot to recovery and wipe, flash the rom. :thumbup:
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
:facepalm:
I've been such an idiot. After a couple of tries it seems that I can actually boot to flash mode so it was just as simple as using Sony Update Service and repairing the phone. I feel like a bit of a tard. Anyway, this thread is resolved. Thanks for all your help and I've :thumbup: but just as a last note what kernel will go well with the GingerDX Rom?
And again thanks for all the quick help man. greatly appreciated.
J_T_ said:
:facepalm:
I've been such an idiot. After a couple of tries it seems that I can actually boot to flash mode so it was just as simple as using Sony Update Service and repairing the phone. I feel like a bit of a tard. Anyway, this thread is resolved. Thanks for all your help and I've :thumbup: but just as a last note what kernel will go well with the GingerDX Rom?
And again thanks for all the quick help man. greatly appreciated.
Click to expand...
Click to collapse
lol. no worries. believe me, i've been there too.
glad you found the solution. :thumbup:
Just because i don't doesn't mean i can't.
I got hard brick too
please help me! My X8 cannot boot and green led is off!
longlnn said:
please help me! My X8 cannot boot and green led is off!
Click to expand...
Click to collapse
what did you do? what happens when you try to power it on?
Just because i don't doesn't mean i can't.
cascabel said:
what did you do? what happens when you try to power it on?
Click to expand...
Click to collapse
i try power it on but don't have any sign life.
no led, no boot, no vibrate
longlnn said:
i try power it on but don't have any sign life.
no led, no boot, no vibrate
Click to expand...
Click to collapse
try charging it fir a few minutes and try again. if not, you'll have to send it to sony.
did you try unlocking your bootloader?
Just because i don't doesn't mean i can't.
Completely dead?
cascabel said:
try charging it fir a few minutes and try again. if not, you'll have to send it to sony.
did you try unlocking your bootloader?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
I tried unlocking my bootloader. The phone turned off an since then no sign of life...
No charging, no led flashing, doesn't turn on, won't go in flash mode.
SEUS, PCC and Flashtool doesn't recognise it.
Is it hardbicked? Is anything that can be done?
Waranty expired too!
Spinalonga said:
I tried unlocking my bootloader. The phone turned off an since then no sign of life...
No charging, no led flashing, doesn't turn on, won't go in flash mode.
SEUS, PCC and Flashtool doesn't recognise it.
Is it hardbicked? Is anything that can be done?
Waranty expired too!
Click to expand...
Click to collapse
what date does it have on the back of the phonen 11w29+? looks like it's a hard brick though.. those tools Can't revive it. you'll have to send it to sony to get it repaired..
Just because i don't doesn't mean i can't.
cascabel said:
what date does it have on the back of the phonen 11w29+? looks like it's a hard brick though.. those tools Can't revive it. you'll have to send it to sony to get it repaired..
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
11W43
Does anybody happen to know if there's any chance that my hometown Sony service can handle that, or they will gonna send it at a central somewhere else?
Spinalonga said:
11W43
Does anybody happen to know if there's any chance that my hometown Sony service can handle that, or they will gonna send it at a central somewhere else?
Click to expand...
Click to collapse
send it to a nearby Sony service center because your manufacturing date isn't safe to perform the unlocking of the bootloader, and yes, it is indeed a hard brick
I have same problem, sony service center solved my problem with any cost, free for me.
Sent from my AD683G using xda app-developers app
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
mytch420 said:
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
Click to expand...
Click to collapse
try charging it first my friend. leave it for about 20mins, check if it has life or if Flashtool would recognize it
mytch420 said:
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
Click to expand...
Click to collapse
the date on the battery is irrelevant. what's the date at the back of your phone?
Just because i don't doesn't mean i can't.
I have left it charging over night, Im getting no signs of life from this in anyway.
The back of my phone says 10W51?
I cant get into flash mode
Also: I have an old Vivaz here and the X8, The vivaz was missing a battery and It turns out it uses the same battery as the x8, Ive tried using this battery in the vivaz but it wont turn on or charge, Is the battery gone?
mytch420 said:
I have left it charging over night, Im getting no signs of life from this in anyway.
The back of my phone says 10W51?
I cant get into flash mode
Also: I have an old Vivaz here and the X8, The vivaz was missing a battery and It turns out it uses the same battery as the x8, Ive tried using this battery in the vivaz but it wont turn on or charge, Is the battery gone?
Click to expand...
Click to collapse
looks like the battery may be the issue. can the battery of the vivaz (if it's charged) power on your x8?
Just because i don't doesn't mean i can't.

[Q] Xperia X8 hangs up at Sony Ericsson logo

Hello. This is my final resort. -.-
I used miniCM7-2.2.1. I've tried everything that has been suggested. My X8 hangs up on the Sony Ericsson logo and I cant access the xRecovery menu. To shut my phone down, I have to take out the battery, since it wont shut down when it hangs up no matter how long I hold the power button. Then I insert the battery again; but when I connect the USB cord, it starts up automatically and then hangs up again. I've tried flashing it but it wont detect in flash mode even if the led is green. so no luck on flashing. I tried SEUS but it says I already have the latest software installed so no luck in updating either. Somebody help! T.T
SUMMARY:
-Hangs up on logo screen
-Cant access xRecovery
-Doesnt detect flash mode (even when led is green)
-SEUS cant upgrade since latest software is installed
PLEASE HELP!
do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.
cascabel said:
do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
Did you installed gordon gate drivers in drivers folder of flashtool?
Sent from my GT-S5360 using Tapatalk 2
vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
only seus, pcc,or flashtool.. since you can't get into recovery.
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Dear bro,don't PANIC! its the only thing that makes us to create a bit useless threads..
try with Flashtool second time!
and if doesn't work use PC COMPANION its your best Companion
repair the X8 via PC COMPANION
- Turn off the phone, and unplug it from the PC !
- On your PC, uninstall Sony PC Companion
- Restart your PC
- On your PC, clean any Cache and Registry related to Sony PC Companion, then restart PC again.
- Reinstall Sony PC Companion by downloading it from here
- Turn on Sony PC Companion on your PC
- In Sony PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
If Sony PC Companion STILL doesn't recognize your X8, then, uninstall Sony PC Companion AGAIN, and start the above described process AGAIN. It WILL eventually work!
vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????
vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
x8bricked said:
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????
Click to expand...
Click to collapse
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.
cascabel said:
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u
x8bricked said:
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u
Click to expand...
Click to collapse
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:
Gogeta said:
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
no its unlocked i checked twicw again its unlocked using msm7227 it shows 'r'
Well, I can tell you that I had a similar experience recently and I almost **** my pants. After having occupied the restroom, PCC worked for me absolutely perfectly, albeit I did have some problems installing the necessary drivers (had to do it from a different machine, obviously something in the registry was messed up).
Seeing you solved the problem, I recommend you install either a 2.2 or 2.3 ROM. Don't go for 4.x ones if you're up for normal use because they are way too strong for this little device (kudos to the developers who made these ROMs happen, though).
My recommendations:
2.2 - FroyoPro v2.5
2.3 - GingerDX v031b
Both work really well with custom kernels, and are very fast and stable.
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
OK,assuming you have probably root the phone, by the way can you managed to go into recovery mode in your phone? If so, then just copy your rom zip files into the SD card and install zip files from SD card in the recovery mode. By the which Rom and Recovery you are using?
Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
you use flashtool to unbrick your phone? if you use it and can't flash your phone, you have to install flashtool-drivers.exe in drivers folder. everything'll work well.good luck

Categories

Resources