So lately i have been having a ridiculous amount of issues on my phone. RAM was constantly used up it kicked me out of programs all the time, battery sucked, itd be laggy and jumpy power button stopped working etc. so last night i decided screw it i was sick of it and i was just going to start fresh so first i just did the system reset or whatever on the phone.
Now heres the problem, after the reset i turn the phone on it boots up and goes to the tutorial, when i either skip the tutorial or finish it i get an error message saying the tutorial isnt working properly and asking to force close. so i close it and then all i get is a black screen with the clock on the top. Not of the buttons on it work and it wont do anything but pull down the menu.
ive tried the odin 1 click master clear but it and my computer wont recognize the phone along with me putting it into download mode and trying to flash to stock. Odin doesnt see it and my computer says the drivers are broken and it wont recognize the device.
I re-installed all the drivers but the same results occur. I did however manage to have my computer see it when i put it in samsung keis mode (can still choose that from the drop down menu when i plug it in) however i dont know if that will help anything.
So any and all help will be greatly welcomed as i now am without a phone and need it very soon. Thanks
Delldorado said:
So lately i have been having a ridiculous amount of issues on my phone. RAM was constantly used up it kicked me out of programs all the time, battery sucked, itd be laggy and jumpy power button stopped working etc. so last night i decided screw it i was sick of it and i was just going to start fresh so first i just did the system reset or whatever on the phone.
Now heres the problem, after the reset i turn the phone on it boots up and goes to the tutorial, when i either skip the tutorial or finish it i get an error message saying the tutorial isnt working properly and asking to force close. so i close it and then all i get is a black screen with the clock on the top. Not of the buttons on it work and it wont do anything but pull down the menu.
ive tried the odin 1 click master clear but it and my computer wont recognize the phone along with me putting it into download mode and trying to flash to stock. Odin doesnt see it and my computer says the drivers are broken and it wont recognize the device.
I re-installed all the drivers but the same results occur. I did however manage to have my computer see it when i put it in samsung keis mode (can still choose that from the drop down menu when i plug it in) however i dont know if that will help anything.
So any and all help will be greatly welcomed as i now am without a phone and need it very soon. Thanks
Click to expand...
Click to collapse
If Odin isn't being friendly to your phone, try using Heimdall. You can get all the same things you need from Odin, but it's a different set of drivers and a different program, which might solve your issues.
If you need one, here's a Heimdall One-click to stock Froyo that AdamOutler made. It's really easy to use - just download it, let it install, and click flash.
alright ill try it and see how it goes thanks a lot
no luck. Heimdall doesnt recognize it connected and my computer still says it wont recognize it so im guessing thats the main issue first...
Delldorado said:
no luck. Heimdall doesnt recognize it connected and my computer still says it wont recognize it so im guessing thats the main issue first...
Click to expand...
Click to collapse
If you haven't already, try turning your phone and computer off. Then reboot the computer and let it settle. Once it's all set up, move your USB cable to a port at the back of the computer (or somewhere else on the computer if it's a laptop).
Once you've done that, start up Heimdall. Once it's up and settled, start up your phone in download mode, then hook up the phone.
both have been restarted a couple times but ill try that again. i grabbed a different usb cable as well. this time it allowed heimdall to recognize the device at first but when i started it said no drivers and it i followed the instructions it said after however the options heimdall said werent available. im confused why it would so no drivers as i just reinstalled them and when i plugged the phone in for heimdall it said drivers installed.
but no at the end of trying a couple times the device is back to unrecognized and heimdall cant see it
Delldorado said:
both have been restarted a couple times but ill try that again. i grabbed a different usb cable as well. this time it allowed heimdall to recognize the device at first but when i started it said no drivers and it i followed the instructions it said after however the options heimdall said werent available. im confused why it would so no drivers as i just reinstalled them and when i plugged the phone in for heimdall it said drivers installed.
but no at the end of trying a couple times the device is back to unrecognized and heimdall cant see it
Click to expand...
Click to collapse
Heimdall uses a different set of drivers (libusb) instead of the ones that samsung provides. I would suggest that you go ahead and uninstall the Heimdall drivers as well as the samsung drivers, reboot the computer, and run Heimdall again. Let it finish installing the drivers and be ready, then reboot one more time and try again.
eventually got it working and got it back to stock 2.2 however my 3g isnt working and when i try to run the update on the phone to gingerbread it wont connect to att. i thought maybe i could just flash up to gingerbread but when i put it in download mode and connect it odin still doesnt recognize it and this was after rebooting both
Delldorado said:
eventually got it working and got it back to stock 2.2 however my 3g isnt working and when i try to run the update on the phone to gingerbread it wont connect to att. i thought maybe i could just flash up to gingerbread but when i put it in download mode and connect it odin still doesnt recognize it and this was after rebooting both
Click to expand...
Click to collapse
If you were able to get it to work with Heimdall, and you're wanting to go to stock GB, I would suggest using Adam's UCKH3 Heimdall One-click. This will flash stock AT&T Gingerbread (well.. technically that doesn't exist yet, but..) and the i897 Gingerbread bootloaders at the same time.
Just make sure you have all your important stuff backed up to something that isn't your phone before you do it, and that you have a good connection between your computer and phone.
well that one worked so thanks but still no 3g or any data connection
Delldorado said:
well that one worked so thanks but still no 3g or any data connection
Click to expand...
Click to collapse
Just to check, make sure your IMEI matches the one on your phone.
To do this (assuming you're on AT&T), go to the dialer and type *#06#.
Write down that number, then open your battery case.
Take out the battery, and look on the sticker with the barcode. Above the first barcode should be your phone's IMEI. Double check to make sure those match.
If not, you may have some issues with the contents of your /efs folder.
nvm i figured it out. had to reset the access points or whatever to default. now onto to re rooting. thanks for all the help. know anything about the power button not working? i thought it mighta just been the software before but its still not working. do fixes exist? because i really hate using AnyLock to use my phone.
Delldorado said:
nvm i figured it out. had to reset the access points or whatever to default. now onto to re rooting. thanks for all the help. know anything about the power button not working? i thought it mighta just been the software before but its still not working. do fixes exist? because i really hate using AnyLock to use my phone.
Click to expand...
Click to collapse
It's possible it's dirty and needs cleaning - canned air might be a good solution.
is there a heimdall gb root? cuz as usuall all the odin ones never detect my phone
Delldorado said:
is there a heimdall gb root? cuz as usuall all the odin ones never detect my phone
Click to expand...
Click to collapse
If you're wanting one that's rooted and has CWM, check out the one in my signature. It's stock KH3 gingerbread, with CWM, rooted, but no bootloaders.
hey just wanted to thank you for helpin me out all day. that last heimdall gb helped me about immensely. ive finally been able to install some custom roms and what not successfully. i used to follow every direction super close and nothing ever worked but finally going my way so thanks a bunch ha
Related
So, to start off, the issue at hand is not download mode, I can get into that quite easily. It's that neither one click odin or regular odin won't recognize it. I've gone back to stock so many times without issue, but this particular time I tried, it froze on sbl.bin. My screen turned a greenish black, and stayed on that for about 10 minutes before I decided it was frozen and I did a battery pull. Tried it again and the exact same thing happened. Now, windows says "One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it"
I was going from icezar's Darky's 5.5 to stock when this happened. I've gone from the first i9000 2.2.1 stock rom back to stock 2.1 with no problems before. Any ideas? I've also reinstalled drivers, and I still get that error. also, my power button doesn't do squat when it's completely powered off. Only the volume up+down button combo can bring the download screen up, other than that, no go.
Ouch - You've reinstalled the drivers.
Odin doesn't see it when you have download mode and the USB plugged in.
Can you get ADB to see the device while in download mode?
You had USB Debugging turned on before things went south?
Hmm.. you could try:
Turn on ODIN
Remove the SIM, external SDCard, and battery.
Hold down both volume buttons - plug in the USB cable then jam in the battery and see if ODIN will recognize it then.
But.. if you can't get the computer to recognize your device even after re-installing the USB Drivers?
eh you might wait for a few more posts - but I think you might be fubard.
so you went into download mode, clicked start in ODIN 1 click and got hung up? nothing else happened during the process? Was the cable plugged all the way in?
Not sure how ADB would work if windows isn't recognizing it.. Do you have another PC you can connect to?
Sounds like it pooched while he was trying to Odin 1 Click back to stock and now its probably fubard as his computer won't recognize the device.
Good call on trying a different computer.
Btw - where are you downloading the USB drivers from? There are multiple sources out there and some seem to work better than others.
Thanks for the replies guys
I got them from the wiki page way back when around it was first put up... but I haven't really changed them since they were the only ones that I found worked at the time and pretty well actually, they've recognized my captivate perfectly all the time! Well, until recently. I also have kies mini installed if that means anything. I am gonna try a friend's computer and see what happens. *crosses fingers*
alex4lex said:
Thanks for the replies guys
I got them from the wiki page way back when around it was first put up... but I haven't really changed them since they were the only ones that I found worked at the time and pretty well actually, they've recognized my captivate perfectly all the time! Well, until recently. I also have kies mini installed if that means anything. I am gonna try a friend's computer and see what happens. *crosses fingers*
Click to expand...
Click to collapse
if you haven't already, try the files attached to the Odin 1 click thread (on any pc you can get your hands on )
not sure what options you have until you can get a pc to recognize the device
Yup.. the good news if you can get into Download mode on your phone - its def not bricked.
I use the Odin 1-Click USB drivers posted there and have had no issues on either my work rig Windows XP 32 bit or Windows 7 64-bit.
Epic success! Phone is back to 2.1 stock! Thanks for all the help joegeek and fisherman
I had loaded the ginger clone rom and all was well. I then however wanted to swap kernels so i loaded up seitrons cwm 1.5.6 and proceeded to flash through cwm. this has now become the worst day of my life. the phone will not boot past the galaxy s screen. i cannot not get into recovery and both computers now say usb device not recognized when in download trying to flash odin. i am worried that something is corrupted on my phone because not matter how many times i uninstall and reinstall the drivers no luck. i think it is officially bricked and im sol. maybe some great minds can figure it out here.
It's not bricked - issue is trying to get your computer to recognize your phone when in download mode so you can flash it back.
What OS are you running? Also - where did you download the drivers from? Some seem to work better than others.
If you can get to the galaxy screen you might still be able to to get into recovery. pull out the battery and use the 3 button combo. Hold down both volume button then power and let go of the power button after it turns on. then just reinstall the rom
I'm willing to bet you can also get into Download Mode either with button combos, or a JIG. Once in Download, you can use Odin to restore to JF6, and have a working phone to flash around with again.
i can get into download mode no problem. and i think it is quite possible drivers are corrupted on the phone itself. my wifes phone works on the same exact setup. no usb device not recognized error. i have tried the drivers from here and samsung directly with no luck. 3 button combo does not work. sim out sim in battery out and in. but like i said it will just not register with the comp and hers will. so im going to att and seeing about replacing it. but i will see how that goes. ive done this lots of times with no issues ever.
download works
3 button combo does not so no recovery
usb device not recognized error
thanks for the help and keep it coming i will try everything if i haven't already.
Try current usb port
Sent from my SCH-I897 using XDA App
Think I'm in worse shape. Tried flashing just the kernel to get BLN working again (last ROM I put on somehow loaded a non-compatible kernel). Now the phone boots the white ATT screen and just sits there. Can't get it into D/L mode with 3-button and doesn't respond to computer I have been using to flash ROMs for a couple weeks now...
Am I hosed? ANY help would be greatly appreciated...
You could try to use a JIG to force your phone into Download Mode
Okay...well, got into D/L mode finally. Used Odin to get it back to factory. Used the One Click rooter again, except now it boots to recovery 3e, which doesn't let my power button work as the okay button Pulling the battery to reset it, but it will no longer go into D/L mode to use Odin again. It keeps booting to the recovery Utils, which I cant get out of...*sigh*
Thoughts?
at least your able to do something i still cannot get my phone into recovery or to be recognized by the computer. it is not the drivers so i have no idea. i can only think that something got funked up with the kernel flash.
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
magnumrt562 said:
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
Click to expand...
Click to collapse
i actually tried this yes. i had a blackberry cable from the storm (shivers) that was laying around. tried that but no luck with that or my wifes cable as well. but a good tip for others nonetheless
Pirateghost said:
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
Click to expand...
Click to collapse
I just want to quote this to stress the importance.
Thank you, didn't realize that (still sorta new to this)...
I downloaded a zip (I thought from here somewhere) that extracted into the 4 files. Anyone got a link to the JH6 set of files?
I also downloaded DG's "One Click Odin", but it doesn't seem to really do anything when I run it unless I manually load all the files. Also, I don't see a "Master Clean" like the post refer too
are you sure you downloaded the right odin? in the one click version, theres no option to load files at all. only a "start" and "master clear"
make sure the odin one click is open before you connect your phone.
http://forum.xda-developers.com/showthread.php?t=731989
You guys rock! I don't know how, cause I could have sworn I D/L'd it from that link before and I got the generic Odin, but it looks like I have the right one now! Thank you for your patience with us noobs as we start getting into this new world!
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
zippox180 said:
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
Click to expand...
Click to collapse
I was having the same problem. Have you tried powering off, start odin, hold both the volume up/down, then plug in the usb to your phone?
So heres the synopsis on what my issue is:
first of all-
phone: Samsung Captivate build 1010
current OS: (botched install of Darky 8)
problem: no recovery menu capability, stuck in reboot loop (will not go past ATT Logo), can go into download mode but odin does not see the phone
I botched a Darky 8 install. I attempted to install the rom to my captivate via rom manager but to no avail. I then decided to give the install a try via clockwork and had luck. the rom was not to my liking so I went to mount the internal sd and proceeded to delete all files internally to make a fresh odin install possible (as I always do). It was at the time of restarting my phone that I realized the rom I install was accidently the I9000 rom on my captivate, thus forth being a possible source of my issue. Currently I have a phone that is stuck in a reboot loop any time I plug it into a power source, or attempt to power it on. While in said loop the phone will not go past the ATT logo, and as it cycles, at the I9000 screen a robot voice pops up saying restore system. Ive attempted to reflash back to stock with the stock captivate odin3 OCD, but I am having no luck with the phone being recognized by odin (run as admin). I am currently running Mac OSX 10.6 with windows vista on Virtual Box 4.0, and have had luck previously with flashing the phone back to stock after I decided to try new versions of cognition. Currently my phone can only go into download mode and not recovery due to the boot loop. please help asap, this my only means of communication with my family on the other side of the states
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
CB650 Wolf said:
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
Click to expand...
Click to collapse
going to try, redoing my virtual box in hopes that it was something stupid, and also trying the other usb port on my macbook.
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
butchatbg said:
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
s0n1cm0nk3y said:
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
Click to expand...
Click to collapse
Try using ADB..
Edit...misread
rickysa2000 said:
Try using ADB..
Click to expand...
Click to collapse
sadly I wished that work, I tried using adb reboot recovery, and in the attempt, the phone was not able to be detected. Should this be done in hopes to catch it at the right time in the boot loop or in download mode. Ive tried both.
So can you still get into Download mode? If so I would suggest finding another computer to use. For some reason, last week, my PC that I have been using to flash for months decided not to recognize my phone in download mode.
So I switched to my laptop, loaded the ROM. I tried reinstalling drivers and all kinds of stuff but nothing worked. I backed up my PC and re-imaged it and it's working again.
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
avgjoegeek said:
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
Click to expand...
Click to collapse
Odd I was told your perfectly fine to do so, and then from there do an odin flash. Ive done it before, but oddly enough I think what screwed me was because I did it during while in the rom, vs while in 2.1. I just wanted to try to get a clean slate. doing the master clear code from samsung never really deletes the left overs from say clockwork and such on my internal sd.
problem was the virtual machine, plugged it into a friends computer and all was done within a couple of mins. leave it to emulation falling short :/
EDIT:
odin crashed while going back to stock then
my phone will get to download mode buuuuut.. my computer doesnt recognize my phone...
i re-downloaded drivers and the phone is recognized however odin failed the 2 times i got it in dl mode(took about an hour to get it each time)... so i have a jig ordered but with odin not working im not feeling optimistic
nothing seems to happen when its plugged into the wall no battery icon. i reinstalled drivers hoping that would help with no luck.. i just got it back in dl mode after like an hour of it not turning on for me but it doesnt do anything once i get it there.
Get odin3 one click and use it in dl mode. It will brg ur phone back to stock
Sent from my SAMSUNG-SGH-I897 using XDA App
definately problem of bad USB..either cable or port....try using different USB cable or different computer....Use full odin by iCezar...its with minimum risk....specially very beneficial in cases like yours....
my pc doesnt see my phone. thats the issue i cant use odin. and the only thing my phone will do is glow black or go to download mode, idk if its charging but its getting hard to get it in dl mode, multiple tries atm no luck
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
donks232 said:
my pc doesnt see my phone. thats the issue i can use odin
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
Click to expand...
Click to collapse
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
viny2cool said:
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
Click to expand...
Click to collapse
nope this only happened AFTER my crash on odin. my pc has always seen the phone.
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
bigbyte.me said:
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
Click to expand...
Click to collapse
i tried that once of twice
need help
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
jvmiralles said:
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
Click to expand...
Click to collapse
thats not a big deal, just get it in download mode, and flash it with odin.
EDIT: might as well us this post to say what my computer says with usb since i got in in dl mode again...
USB device not recognized
one of the usb devices attached to this computer has
malfunctioned, and windows does not recognize it.
then something about for assistance in solving this issue click here
this has happened to me acouple times, the first was my fault I pull the usb before odin finished. I could get back into Download mode but Odin would not see the phone and computer would not recognize the phone either, device not recognized.
I tried rebooting, re-installing drivers etc. did not work.
but after an hour or so I finally got it to recognize and odin'd back to stock and back to flashing I was.
this is what I did hope it works for you.
1. disconnect all usb devices
2. un-install captivate drivers
3. reboot computer
4. goto device manager and verify that there is no USB device errors, if there is delete them and reboot again verify again in device manager.
5. install captivate drivers
6. reboot computer
7. start ODIN (DG or iCezars, iCezars is safer)
8. plug USB cable into the computer first (the one that came with the phone not an after market one)
9. hold both up and down volume buttons on the phone
10. plug the usb cable into the phone quickly to get into download mode (if I plugged the phone is slowly ODIN did not recognize the phone no COM, once I did it quick and it picked it up)
11. push START as soon as ODIN shows the COM1, COM2, COM3, COM4 etc (this had to be done quickly too, If i waited ODIN would show the COM but still would not start flashing back to stock)
this worked for me more than once I hope it helps you good luck
oh ok thanks, ill give that a try when i get off of work. i hope my battery doesnt die idk if its charging or not
well no luck even getting back to download mode. i bought a jig so i guess im waiting and trying while i wait.
i keep reading its possible to completely brick if odin fails... did i perma brick?
well a bump of sorts, the jig should come in the mail tomorrow. i miss my phone
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
donks232 said:
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
Click to expand...
Click to collapse
I have not had to do this but I know some others had issues with Odin and had to right click on Odin and run as administrator for it to work. Also the Odin 1 click should work in almost any situation to get you back to stock. The only worry (again never had the problem) is that depending on the build version of the phone you could lose the three button recovery. Look for the Odin that DG posted.
Sent from My KickAss Captivated CM7 OC'd 1.4Ghz/Undervolted
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Toddyn said:
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Click to expand...
Click to collapse
Did you try a jig?
ok to start with I am soft bricked cause i got the phone-!-computer on my screen. here is how it got bricked to start with... was updating to android 2.3 gingerbread with kies mini and the first time when finished updating my wifi would not work so i flashed the rom with odin and it was a bad version cause instantly it went to recovery mode. so I went and downloaded odin one click and flashed it back to stock android eclair and went to update to 2.2 froyo with kies mini our power blinked and now im softbricked.
ok here is what ive tried so far... 3 button combo both volumes and power tried all that. ok next i tried one click unbrick it just say failed everytime... tried AIO captivate toolbox and no avail.. went radio shack got 3 resistors 100k made a jig touched pins 4 and 5 and didnt work either.. so my questions are as follows
1. what next????
2. could i have possibly shorted out my usb port on my phone since i accidently slipped and touched a pin i should not have and AIO captivate toolbox says usb debugging isnt on.
3. is there any way to test the micro usb port on the phone to see if its working right?
any and all help would be very much appreciated.
thanks...
You're actually in an ok place. That phone--/!\--computer screen will function like download mode most times. Just try your Odin file again and you should be fine.
odin isnt recognizing it. is there a way i can make it recognize it?
I just went through this and got my phone working so no need to panic. Odin wouldnt see my phone but heimdall does. Search for the kb2 heimdall one click package and see if that helps. Since you flashed back to 2.2 youll need to use kb2. If you are on GB i897 bootloaders youll need the kk4 heimdall one click package
garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Try different ports, if nothing else. Look in the "Captivate Connection Issues" post in my signature for more items.
Also, you will probably want to stop using the AIO Toolbox. That particular piece of software is a little risky, as it flashes a known dangerous bootloader setup.
I found myself in the same boat. 3-button combo won't work, you have to remove battery and usb cable. Replace battery. Plug usb cable into the motherboard directly(rear), hold volume + and volume - then plug the usb cable into your phone. hold volume buttons until your phone boots into download mode. (assuming you have proper drivers installed)
didnt work
tried both heimdels kk2 and kk4 they both say looking for device. and also tried plugging my usb cord into every usb port on my computer still nothing.
Did your drivers unseat? for some odd reason i had to reinstall the drivers to get mine out of soft brick.
drivers
would that be the drivers for the program or the phone? and also on the kk2 and kk4 they download as jar files just like oneclick unbrick did so do i need to unzip them and move the jar file to where the exe folder is then right click and run as administrator or can i just run the jar file i downloaded?
also the the zadig driver program that comes with heindel programs will not see my phone at all when plugged in any usb port but my wife has a captivate also and when i plugged hers in zadig can see it as samsung usb composite device....
garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Pull battery, pull cable. With phone off, replace battery. Then press volume up only, and power. When screen loads, plug your USB in. If you get the system files screen, press the menu key. Then try Oden. This is what I had to do to get it to work.
Gingerbread through mini kies sucks. Your better off getting Gingerbread here:
http://forum.xda-developers.com/showthread.php?t=1300843
didnt work either
tried the just the volume up and power and plugged in usb still stuck in brick mode...
didnt work
the volume up and power then plug usb didnt work still in brick mode. should i try the usb jig with the phone off or on? when i touch pins 4 and 5 with the jig and the phone off the screen will come on but still computer- ! - phone no download mode
got it
finally got into download mode with the jig and alot of wiggling cussing fussing griping and finally praying lol.... thanks to all of you for your help not many strangers will help people anymore so thanks guys for your time i really appreciate it greatly
HELP
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
cappy flasher said:
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
Click to expand...
Click to collapse
Unistall your phone's drivers, restart pc and reinstall them.
Drivers
So i dont know what the drivers are I had a friend set this all up for me. also i think if odin id updated that might work. It was current at the time but when a few months pass its time to update!
---------- Post added at 03:53 AM ---------- Previous post was at 03:46 AM ----------
BWolf56 said:
Unistall your phone's drivers, restart pc and reinstall them.
Click to expand...
Click to collapse
so i just updated odin and i still got nothing. so what are the drivers? ill try that.
if you dont even know what drivers are in windows, and have other people set things up for you, you should not be flashing your phone in the first place.
any time you buy a device and hook it up to windows you install??? drivers.
Google: "drivers"... a piece of software that tells an operating system how to use a device.
but it is doubtful reinstalling your drivers will help
what version of odin are you using? what are you trying to flash now? what were you flashing when it messed up?
im sorry but this may end up being an expensive lesson not to do things you dont understand. you may have to send your phone away to be jtagged or unbricked.
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Not to be mean or start something, but if you work for mobile tech videos and you don't know what drivers are or you say you flash phones multiple times a day, then you should have a GREAT idea of what to do to fix this problem. Did you flash an ICS ROM and it bootlooped on the first flash, well that is supposed to happen. And Since you were on 2.3.5 then there is no DL mode combo problem. I don't know what to tell you. use your resources and Google it, or better yet let me Google that for you...
cappy flasher said:
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Click to expand...
Click to collapse
Heimdall flash!
Sent from my SAMSUNG-SGH-I897 using XDA