Database Develop

Please help unable to install any rom??

Hey sorry if this has been asked before i couldn't find it anywhere so there is some problem with my phone i don't know what is happening every time i use to install a new Rom it use to install perfectly without any fc's boot loop errors etc, but from past 2 days i don't know why any ROM i try to install (even the one which i use to work perfectly) will not install perfectly there will be fc's boot loop error wont pass the X when i switch on the phone. Please help its driving me crazy

Make sure your wiping old data in recovery.. and if flashed a new kernal or radio could also cause a problem too

ilostchild said:
Make sure your wiping old data in recovery.. and if flashed a new kernal or radio could also cause a problem too
Click to expand...
Click to collapse
yes i did Wipe data/factory reset ,Wipe cache,Wipe Dalvik-cache but just now i discovered that after doing this and still last installed rom has not been wiped its still there wtf what should i do and yes i did install 2.6.34.1_AVS-925mV_BFS_1113Mhz kernel how do i completely wipe everything???

Umm also do wipe sd partition, then do another wipe factory and cache-.. then do a repair sd then try to flash new rom.. this is what i usually do when i install new roms

still no luck i even did clear storage then wiped everything and i dont use app2sd(ext) i dontunderstand what to do i even tried with the clockworkmod's recovery still the same

sorry man, My only guess and idea is try to flash back to a normal kernal, then flash rom.. only thing i can come up with atm, or you can wait and see if some one that comes up with a better solution

where can i find norman kernel or any kernel which can fix this?

[Q] Installing custom kernel = boot loop

Hello, when i try to install custom kernel i face a boot loop. I only tried with v10, not tried with v20 though. Tried 3 different kernels and the same. Why is that? It just doesn't work.
And can you tell me some working custom kernel for v20l to try?
Thanks in advance.

What rom are you using?
For myself, usually its an issue of partition beinh ext3 or ext4 that will cause bootloop. I will usually try back2ext3 from paul or ext4 converter.. either one usually fix the bootloop depending on kernel requirements.
Cheers!

Not enough details. Which kernel?
On total stock ROM or on custom stock based ROM?
We are talking about kernel do don't use what is mentioned just above, it will wipe your all system.

I had a boot loop problem after installing a custom ROM based on stock ROM. I didn't wipe the phone before updating to custom ROM. After recovering the original ROM, I wiped the phone from CWM and then updated it and all works well now.

Well i have tried Neoblaze, HorsePower, Spica. I don't wipe after/before installing.
I om on stock rom. Then i must go back with back2ext3.

Striatum_bdr said:
Not enough details. Which kernel?
On total stock ROM or on custom stock based ROM?
We are talking about kernel do don't use what is mentioned just above, it will wipe your all system.
Click to expand...
Click to collapse
Sorry if I misunderstood the original question and thanks for clarifying!

martinesko36 said:
Well i have tried Neoblaze, HorsePower, Spica. I don't wipe after/before installing.
I om on stock rom. Then i must go back with back2ext3.
Click to expand...
Click to collapse
After installing the kernel try wiping cache and dalvik and see if that helps.

that's your problem, you have to wipe cache and dalvick cache after flashing. hope this can help

Thanks you, im very happy - working now. Flashed HorsePower.

Does Flashing a Custom Kernal Using Orange Fox Recovery Leads to Bootloop ?

Help: CM10 stuck on boot screen since I flashed it.

Before I used CM10 i just used the stock (flashed latest GB) that came with my phone. So I flashed CWM5 and cleared all the three stuff I was supposed to. I installed the CM10 zip and since then its been stuck on the boot animation, not even a loop. Just the animation.
Any ideas whats wrong?
Thanks in advance

JellyBean 4.1.1 said:
Before I used CM10 i just used the stock (flashed latest GB) that came with my phone. So I flashed CWM5 and cleared all the three stuff I was supposed to. I installed the CM10 zip and since then its been stuck on the boot animation, not even a loop. Just the animation.
Any ideas whats wrong?
Thanks in advance
Click to expand...
Click to collapse
Well happened with me once when I had put AOKP ROM in my Galaxy Note.
Here is what I did:
Go to Recovery.
Wipe Cache.
Try reboot
No results?
Recovery again.
WIpe Dalvik Cache Also
Try reboot.
Still no results?
Try to wipe data/fac reset and re flash some other ROM as of now (which you are confident about that it will work)
Now go ahead and let the old ROM boot. (Surely it will, as you would have used prior)
Now, go connect USB and check MD5 of the file you had kept on SD Card (I mean the CM10 file)
I found that my MD5 didnt match.
If you think it didnt match download again.
If you know it matches then go for reflash.
But this time before flashing the new ROM just use some cleaning script such as Ultimate KErnel Cleaning Script. In Galaxy Note I used Jbroid Kernel Script. I aint sure now if you can use Jbroid in Ace.
Goof luck!
Press Thanks

I got it working, what I had to do was flash CM7, then CM9 then CM10 :/ after that it was fine Thanks for the help

Welcome

The problem was with the kernel being different in CM10 and official version.

realzahed said:
The problem was with the kernel being different in CM10 and official version.
Click to expand...
Click to collapse
Please ask CM9 and CM10 questions here:
http://forum.xda-developers.com/showthread.php?t=1742844

Problem installing Devil Kernel 1.1.3

Hi, I'm wondering if I'm doinbg something wrong but I can't install the new Devil kernel version on latest Helly Bean nightly with 1.1.2 Devil Kernel Installed. I downloaded the file 3 times so it's most probably not a corrupted file problem. And the first time I installed it gave me major problems and had to revert back to gb, couldn't install HB from there because of status 7 errors wich only stopped when i did a GB-ICS-HB install. I tried to revert to 1.1.2 now but phone is stuck on HB bootscreen so I think I'll have to Odin GB again and then ICS and HB+1.1.2 but I like to have latest rom versions and kernel. Does anyone see where I fail in my installation? BTW I always wipe cache and Dalvik cache between any new zip installation, just in case....
Thanks in advance for any help and I have to say alot of thanks already for all infos on this forum because I went from noob to not so noob in a matter of days by reading all your usefull threads! :good:

fouidli said:
but I like to have latest rom versions and kernel. Does anyone see where I fail in my installation? BTW I always wipe cache and Dalvik cache between any new zip installation, just in case....
Click to expand...
Click to collapse
Changing from one to another can be tricky, sometimes you need to flash TWICE
But First Backup your EFS folder from GB stock to SD card, do the complete wipes than flash, If it loops, flash again

xsenman said:
Changing from one to another can be tricky, sometimes you need to flash TWICE
But First Backup your EFS folder from GB stock to SD card, do the complete wipes than flash, If it loops, flash again
Click to expand...
Click to collapse
I do this with roms, thanks for the idea to do it with kernels, I'll try it in a couple of days, enjoying All In One 10/08 for the time being! :good:

[Q] URGENT My Note doesn't boot after flashing HydraCore v7

Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?

Quimerinha said:
Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?
Click to expand...
Click to collapse
Did you wipe cache and dalvik cache?
Next time read the threads for a new kernel or a new Custom Rom here in XDA and follow the installation instructions carefully. This reduces the chances of error dramatically.
But first try to clean the caches and reboot again.

Just wiped Dalvik Cache and Partition Cache but i still can't boot.

Quimerinha said:
Just wiped Dalvik Cache and Partition Cache but i still can't boot.
Click to expand...
Click to collapse
Please try the factoy reset.

As the poster before said: factory reset is a possibility.
But: only if you really sure you're using a recovery in a safe kernel. This should be from what you told before.
Another option I would try first:
So I would search for the Philz kernel for your ICS and install this first in CWM. Maybe you can boot with this into Android. If not this gives you a safe environment for factory reset or installing a new Rom

When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing

djoni_gitara said:
When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing
Click to expand...
Click to collapse
Thanks dude, you saved me!
Didn't need to do the factory resets, used this .zip and now i can boot. Think i will stay with that kernel for a while now Maybe later i get back to SpeedMod. But, anyway, thank you all for helping me out with this guys, I really appreciate it.