Related
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Did you try looking at the help page on the thread in the development section? It's right before the post is finished, there will be a link that will lead you there.
Hope that helps, if not I can try to just copy and paste the instructions hahaha
scheccia said:
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Click to expand...
Click to collapse
Did you do a full wipe before flashing RC4.1?
kabracity said:
Did you do a full wipe before flashing RC4.1?
Click to expand...
Click to collapse
yes... i try to flash a miui rom first also.
I try to do a full wipe... i try to install a original rom... but when i flash rc4.1 the phone stuck to logo.
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
torrentship said:
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
I agree with you... RC3 was fine for me... fast and all worked... RC4 has some wifi issues... It switch on/off and doesnt stop till i reboot the phone... im thinking about to downgrade to RC3.1 and wait till the next release...
Sent from my GT-I9000 using XDA App
torrentship said:
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
Yes i try it(no backup efs)
If i flash 2 time the rom the phone stuck it and i can't enter in cmw
.. is the only rom that give me this problem... bha...
Hello, have you tried to download the rom again? Maybe it's a bad download..
That's odd, for me i got stats 7 but was because i was flashing the I9000B version and my phone was with the CWM for I9000. Try using odin and flash a sotck rom, after that install the CWM and then the RC4.1.
If anyone want to know the procedure that i do to install the RC4.1 is this:
Starting for CM7 --> flash the ARO 2.3.3 rom to re-write the bootloader (check this option in odin) --> flash the ZTO 2.2 rom to re-partition in original size partitions --> flash the 2.2.1 ARO because it's a nice rom and don't have all the trash that is present in ZTO version --> through kies flahs the ARO 2.3.3 original.
After that the procedure to install the RC4.1 is the standard: flash CWM then install the ROM.
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Bena1988 said:
Hello, have you tried to download the rom again? Maybe it's a bad download..
Click to expand...
Click to collapse
Yes... three times.
I'm having the same problem here.
I tried the first point on the Common Issues page but I'm still not able to go into CWM!
I flashed the Speemod Kernel using heimdll but I can't go back to CM7. I'm getting a Stat 7 error.
Also tried the Devils kernel (Devil_1.0_CFS) with no help ....
Any ideas?
Just wondering...
MaesterB said:
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Arvokm said:
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Click to expand...
Click to collapse
Thats the way I do all went well...
Sent from my GT-I9000 using XDA App
Hi, I'm wondering if I'm doinbg something wrong but I can't install the new Devil kernel version on latest Helly Bean nightly with 1.1.2 Devil Kernel Installed. I downloaded the file 3 times so it's most probably not a corrupted file problem. And the first time I installed it gave me major problems and had to revert back to gb, couldn't install HB from there because of status 7 errors wich only stopped when i did a GB-ICS-HB install. I tried to revert to 1.1.2 now but phone is stuck on HB bootscreen so I think I'll have to Odin GB again and then ICS and HB+1.1.2 but I like to have latest rom versions and kernel. Does anyone see where I fail in my installation? BTW I always wipe cache and Dalvik cache between any new zip installation, just in case....
Thanks in advance for any help and I have to say alot of thanks already for all infos on this forum because I went from noob to not so noob in a matter of days by reading all your usefull threads! :good:
fouidli said:
but I like to have latest rom versions and kernel. Does anyone see where I fail in my installation? BTW I always wipe cache and Dalvik cache between any new zip installation, just in case....
Click to expand...
Click to collapse
Changing from one to another can be tricky, sometimes you need to flash TWICE
But First Backup your EFS folder from GB stock to SD card, do the complete wipes than flash, If it loops, flash again
xsenman said:
Changing from one to another can be tricky, sometimes you need to flash TWICE
But First Backup your EFS folder from GB stock to SD card, do the complete wipes than flash, If it loops, flash again
Click to expand...
Click to collapse
I do this with roms, thanks for the idea to do it with kernels, I'll try it in a couple of days, enjoying All In One 10/08 for the time being! :good:
So I installed Rocket rom, shortly after that I wanted to flash kingdroid rom and it's always stuck on startup. No matter what kernel I take or if I do a full wipe etc... It's always the same problem stuck on that startup screen. The lights of the button won't light up which normaly indicates that it won't boot if I'm correct?
Thanks in advance
Razors123 said:
So I installed Rocket rom, shortly after that I wanted to flash kingdroid rom and it's always stuck on startup. No matter what kernel I take or if I do a full wipe etc... It's always the same problem stuck on that startup screen. The lights of the button won't light up which normaly indicates that it won't boot if I'm correct?
Thanks in advance
Click to expand...
Click to collapse
Pls. give details. What steps you follow & which version of KD are you falshing
By the way it takes more time than normal, immediately after flashing, to boot for the first time
Yin-Yang said:
Pls. give details. What steps you follow & which version of KD are you falshing
By the way it takes more time than normal, immediately after flashing, to boot for the first time
Click to expand...
Click to collapse
Well I flashed cmw recovery, after that I flashed abyss kernel and then I tried to instal kingdroid rom.
At first it was always stuck on the samsung logo but this morning when I tried it, it wen't to the kingdroid boot animation but it stays there for a very long time and there isn't even an indication from the buttons that normaly would light up.
And when I flash back to rocketrom it works from the 1st time
Does anyone have an idea?
First of all, I would assume your on a safe kernel already right?
If your in one, just do a nandroid and/or titanium backup and wipe data/cache partition/dalvik cache and reboot recovery and install from SDcard and flash the Kingdroid Rom again. (make sure also you check the KD ROM as on the correct filesize,as perhaps you might have a bad downloaded file)
letters_to_cleo said:
First of all, I would assume your on a safe kernel already right?
If your in one, just do a nandroid and/or titanium backup and wipe data/cache partition/dalvik cache and reboot recovery and install from SDcard and flash the Kingdroid Rom again. (make sure also you check the KD ROM as on the correct filesize,as perhaps you might have a bad downloaded file)
Click to expand...
Click to collapse
I'm pretty sure im on a safe kernel. I did as you said but then it keeps getting stuck on the kingdroid bootup animation
try redownloading the KD Rom file (delete the one you have now) and redo the steps (3 wipes) then flash the redownloaded ROM again.
Ok I completly redownloaded KD, did a full wipe, wiped cache and davik and then flashed the rom.
Still stuck on the boot animition.
I found out that if I take cf kernel or notecore kernel it would show the KD animation and if I take speedmod kernel it would just show the samsung logo.
I don't know why it won't boot up properly, I did it before and everything wen't very smooth.
Maybe something with the modem selection? Would be strange because I took the exact same one as last time when it did succeed
Anyone have a clue? I tried the KD by dr tailly v8.0 and this one works but I like the 7.4 that was made by that other guy more.
Razors123 said:
Anyone have a clue? I tried the KD by dr tailly v8.0 and this one works but I like the 7.4 that was made by that other guy more.
Click to expand...
Click to collapse
I assume you downloaded the zip file straight on the phone...Maybe you should download on pc and transfer it to the phone after...Doesn't do any harm trying it.
Grimmlocks said:
I assume you downloaded the zip file straight on the phone...Maybe you should download on pc and transfer it to the phone after...Doesn't do any harm trying it.
Click to expand...
Click to collapse
I've downloaded the zip file on my desktop and then put it on my sd card. I really don't understand why it won't boot properly
best advice I can give to you bud would be to downgrade to GB first and flash abysskernel, do the 3 wipes then flash KD again. (from your SD card)
letters_to_cleo said:
best advice I can give to you bud would be to downgrade to GB first and flash abysskernel, do the 3 wipes then flash KD again. (from your SD card)
Click to expand...
Click to collapse
Ok thanks, can I just put gb rom on my sd card and flash it?
Just flash Hydracore do all wipes and re flash kingdroid
Enviado desde mi GT-N7000 usando Tapatalk 2
Razors123 said:
Ok thanks, can I just put gb rom on my sd card and flash it?
Click to expand...
Click to collapse
yes, just put it on your external sd card...
P.S. reason why I suggested you to downgrade all the way back to GB is the fact that you've been tryin desperately to flash KDv8 on ICS with safe kernels and it's still not booting pass the KD logo right?
so if given that scenario, the only way I can think of that you haven't tried still doing, is flashing KD in stock GB and see if this method finally works....
I have a Galaxy S (I9000B) and a Tab (P1000L), S has CM10 and Tab CM10.1. When I was upgrading my Tab from CM10 to CM10.1, I've forgot to wipe data/factory reset, and when it was done, I've noticed that my background was the same, and all the apps where there. Everything is working fine.
And now the question, upgrading my phone from CM10 to CM10.1 (the most recent version available) do I really need to wipe anything?
It is recommended to do all 3 wipes and to be sure to get a clean and propper ROM, format system too. But you can try it without, if something is not running propperly, the worst case will be that you have to flash it again and then with all wipes. Or if you stuck on bootloop with lost recovery, then you have to fireup odin...
BTW gapps were also changed, so for CM10.1 its also recommended to flash the latest gapps.
rodman01 said:
It is recommended to do all 3 wipes and to be sure to get a clean and propper ROM, format system too. But you can try it without, if something is not running propperly, the worst case will be that you have to flash it again and then with all wipes. Or if you stuck on bootloop with lost recovery, then you have to fireup odin...
BTW gapps were also changed, so for CM10.1 its also recommended to flash the latest gapps.
Click to expand...
Click to collapse
Well, I tried to flash CM10.1, but showed up a error, don't know why. I figured it out that it was my kernel, it was made for 4.1 and not 4.2. So I just downloaded a 4.2 kernel, flashed and right next I've flashed the CM10.1. I can't tell that it is working, I'm locked in the lockscreen (on CM10 it was a 5x5 pattern and now is a 3x3). But I can see my wallpaper is the same
Did you made a nandroid backup before flashing the new JB?
Then i would suggest to restore to latest backuped ICS version and disable your lockscreen pattern. Then reflash the new rom again.
Hope that this will work for you.
rodman01 said:
Did you made a nandroid backup before flashing the new JB?
Then i would suggest to restore to latest backuped ICS version and disable your lockscreen pattern. Then reflash the new rom again.
Hope that this will work for you.
Click to expand...
Click to collapse
I didn't made any backup. If I go back to CM10, will my apps and data continue?
I am not sure, i think yes...but i am afraid you do not have an other choice :fingers-crossed:
rodman01 said:
I am not sure, i think yes...but i am afraid you do not have an other choice :fingers-crossed:
Click to expand...
Click to collapse
I'll try it out now. I was trying via adb to remove gestures.key, but adb isn't finding my device, and as far as I remember it was with USB debugging enabled...
yes usb debugging has to be enabled
rodman01 said:
yes usb debugging has to be enabled
Click to expand...
Click to collapse
As far as I can tell it was, on CM10. Maybe CM10.1 disabled it.
I've tried to rollback to CM10, but I got stuck on the bootanimation. I think I'll have to wipe everything...
perhaps you can try it with flashing an ics kernel via odin in advance.
Semaphore has some tar versions for odin...but i dont have the link for the moment...if you want i can search
rodman01 said:
perhaps you can try it with flashing an ics kernel via odin in advance.
Semaphore has some tar versions for odin...but i dont have the link for the moment...if you want i can search
Click to expand...
Click to collapse
I've already wiped it out. But thanks anyways
here you will find some: http://78.46.194.137/downloads/gt-i9000-ics
Zkaar said:
Well, I tried to flash CM10.1, but showed up a error, don't know why. I figured it out that it was my kernel, it was made for 4.1 and not 4.2. So I just downloaded a 4.2 kernel, flashed and right next I've flashed the CM10.1. I can't tell that it is working, I'm locked in the lockscreen (on CM10 it was a 5x5 pattern and now is a 3x3). But I can see my wallpaper is the same
Click to expand...
Click to collapse
what u can try for the pattern is this: call to that device u have the pattern prob. dont ansver it, just press the menu button, go to settings and disable pattern, i got my galaxy working by this, i had a problem with lock numbers,..
Hi,
I tried installing the Chimera kernel on my sister's Exhibit and after it installed and rebooted, the phone was stuck in the CM10 boot animation. The phone has CM10 installed and it does get past the Samsung logo.
The thread for Chimera tells us to make a Nandroid but I didn't bother as when I installed Chimera on my Exhibit, all was well. So, there is no Nandroid to restore to on this phone.
Is flashing a new ROM the only option?
I'm having this same problem after I flashed everything. my rom, cache, data, delvik+cache, etc...
ScoobSTi said:
Hi,
I tried installing the Chimera kernel on my sister's Exhibit and after it installed and rebooted, the phone was stuck in the CM10 boot animation. The phone has CM10 installed and it does get past the Samsung logo.
The thread for Chimera tells us to make a Nandroid but I didn't bother as when I installed Chimera on my Exhibit, all was well. So, there is no Nandroid to restore to on this phone.
Is flashing a new ROM the only option?
Click to expand...
Click to collapse
Just dirty flash CM10 to delete the kernel.
But I can't even get into CWM...
Deefex said:
But I can't even get into CWM...
Click to expand...
Click to collapse
I was talking to Scoob.
You need to press volume up and power to get in to recovery. Volume down and power is download(Odin) mode.
Dirty flashing is flashing without wiping, right?
And if I do this, I'm guessing she will lose all her files etc.?
ScoobSTi said:
Dirty flashing is flashing without wiping, right?
And if I do this, I'm guessing she will lose all her files etc.?
Click to expand...
Click to collapse
Wipe dalvik cache, cache and then flash CM10 and gapps. Hopefully, everything will still be there.
Ok, I'll try that. I just have one more question, does the CM10 have to be the same as the one currently installed? It's an older version and I don't have the same ZIP, so I'll have to download a newer version.
ScoobSTi said:
Ok, I'll try that. I just have one more question, does the CM10 have to be the same as the one currently installed? It's an older version and I don't have the same ZIP, so I'll have to download a newer version.
Click to expand...
Click to collapse
A newer version should be okay. As long as it is CM10.
It works! I just thanked all your posts in here.
Thank you very much sir!