Database Develop

Problem to install ICSSGS RC 4.1

I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.

Did you try looking at the help page on the thread in the development section? It's right before the post is finished, there will be a link that will lead you there.
Hope that helps, if not I can try to just copy and paste the instructions hahaha

scheccia said:
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Click to expand...
Click to collapse
Did you do a full wipe before flashing RC4.1?

kabracity said:
Did you do a full wipe before flashing RC4.1?
Click to expand...
Click to collapse
yes... i try to flash a miui rom first also.
I try to do a full wipe... i try to install a original rom... but when i flash rc4.1 the phone stuck to logo.

Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.

torrentship said:
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
I agree with you... RC3 was fine for me... fast and all worked... RC4 has some wifi issues... It switch on/off and doesnt stop till i reboot the phone... im thinking about to downgrade to RC3.1 and wait till the next release...
Sent from my GT-I9000 using XDA App

torrentship said:
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
Yes i try it(no backup efs)
If i flash 2 time the rom the phone stuck it and i can't enter in cmw
.. is the only rom that give me this problem... bha...

Hello, have you tried to download the rom again? Maybe it's a bad download..

That's odd, for me i got stats 7 but was because i was flashing the I9000B version and my phone was with the CWM for I9000. Try using odin and flash a sotck rom, after that install the CWM and then the RC4.1.
If anyone want to know the procedure that i do to install the RC4.1 is this:
Starting for CM7 --> flash the ARO 2.3.3 rom to re-write the bootloader (check this option in odin) --> flash the ZTO 2.2 rom to re-partition in original size partitions --> flash the 2.2.1 ARO because it's a nice rom and don't have all the trash that is present in ZTO version --> through kies flahs the ARO 2.3.3 original.
After that the procedure to install the RC4.1 is the standard: flash CWM then install the ROM.

I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk

Bena1988 said:
Hello, have you tried to download the rom again? Maybe it's a bad download..
Click to expand...
Click to collapse
Yes... three times.

I'm having the same problem here.
I tried the first point on the Common Issues page but I'm still not able to go into CWM!
I flashed the Speemod Kernel using heimdll but I can't go back to CM7. I'm getting a Stat 7 error.
Also tried the Devils kernel (Devil_1.0_CFS) with no help ....
Any ideas?

Just wondering...
MaesterB said:
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me

Arvokm said:
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Click to expand...
Click to collapse
Thats the way I do all went well...
Sent from my GT-I9000 using XDA App

[Q] Question about Flashing ICS

I want to Flash Team ICSSGS [Android 4.0.3] (Link to ROM Thread) but I am not for sure what Bootloaders or Kernel I need to use.
I currently have:
Firmware Version: 2.2
Baseband Version: I897UCKB1
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1

In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.

WindRunnerXC said:
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
Click to expand...
Click to collapse
So that ROM I listed in my OP comes with its own Kernel?
And is there a particular Bootloader I should use?
If there is, may you please link me to it?

Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader

capocaccia said:
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
Click to expand...
Click to collapse
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?

froyo will still boot. GB BL are backwards compatible and the ISCSGS script should allow it to flash over any ROM

Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance

mrnapolean1 said:
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
Click to expand...
Click to collapse
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
gugman said:
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
Click to expand...
Click to collapse
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach

capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?

gugman said:
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
Click to expand...
Click to collapse
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.

capocaccia said:
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
Click to expand...
Click to collapse
i see. okey, thanx a lot again. will be able to flash in about an hour and will let you know

after flashing all went good and phone booted with no problem, except that i don't have a wi-fi, it is connected after typing my password in, wifi icon is on home screen, but could not enter any website or connect to my google account. any ideas?

Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS

capocaccia said:
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
so after flashing that file my phone gives me screen like this
Power Reset or Uknown Upload Mode
and it is stucked. so may i pull the battery off and go to recovery mode again and go back to my previous room? should i perform system format in this case?

Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS

capocaccia said:
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
with keys+power button combination i've been able to exit that screen and reinstalled 4.0.3
do you know safe way how do i go back to SimplyStock KK4 V1.0? should i first flash CornKernel_UCKK4_v603 with odin? but is it safe to do over android 4.0.3?
sorry for bothering you, but i am kind of stucked
---------- Post added at 02:52 AM ---------- Previous post was at 02:33 AM ----------
ok, in the end managed to boot the phone with working wifi but still would like to know how to flash back to SimplyStock KK4 V1.0, just in case ;-) if that won't be problem for you. thank you !!!

IMHO the best way to go from gingerbread to ics 4.0 is to
- in the development section download stock kk4 without bootloaders, unless you dont have them http://forum.xda-developers.com/showthread.php?t=1300843
- then download a kernel of your choice probably cornkernal and put it on your internal sd card
- download ICS latest build and gapps and put them on your internal sd
- oneclick odin the stock kk4, let it boot up completely
- power off and install kernal via odin without aut reset
- boot into recovery, factory/data reset, clean cache, clear dalvik, install latest ics, then install gapps right after,
- reboot system and youre done.
IF you want to go back to your other rom the simplest way is to just kk4 fresh install, install kernal via odin, then isntall your rom.
I always keep all my contacts synced with gmail, and titanium backup any game data or app data i need, and reinstall apps through the market.
hope this helps

capocaccia said:
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
Click to expand...
Click to collapse
Now can I go strait from Froyo to the ROM i listed in my OP?

okey, so at the end i decided to switch Doc's Master ICS and so far so good thank you all again for your support !!!!

mrnapolean1 said:
Now can I go strait from Froyo to the ROM i listed in my OP?
Click to expand...
Click to collapse
I gone ahead and flashed ICS onto my phone. It is working good but the Hang up button does not work. In order to hang up, i have to lock it and unlock it.
Now i did a Backup of Froyo from within CWM. if I do have a problem, can i go to DWM and restore the backed up Froyo?

Help: CM10 stuck on boot screen since I flashed it.

Before I used CM10 i just used the stock (flashed latest GB) that came with my phone. So I flashed CWM5 and cleared all the three stuff I was supposed to. I installed the CM10 zip and since then its been stuck on the boot animation, not even a loop. Just the animation.
Any ideas whats wrong?
Thanks in advance

JellyBean 4.1.1 said:
Before I used CM10 i just used the stock (flashed latest GB) that came with my phone. So I flashed CWM5 and cleared all the three stuff I was supposed to. I installed the CM10 zip and since then its been stuck on the boot animation, not even a loop. Just the animation.
Any ideas whats wrong?
Thanks in advance
Click to expand...
Click to collapse
Well happened with me once when I had put AOKP ROM in my Galaxy Note.
Here is what I did:
Go to Recovery.
Wipe Cache.
Try reboot
No results?
Recovery again.
WIpe Dalvik Cache Also
Try reboot.
Still no results?
Try to wipe data/fac reset and re flash some other ROM as of now (which you are confident about that it will work)
Now go ahead and let the old ROM boot. (Surely it will, as you would have used prior)
Now, go connect USB and check MD5 of the file you had kept on SD Card (I mean the CM10 file)
I found that my MD5 didnt match.
If you think it didnt match download again.
If you know it matches then go for reflash.
But this time before flashing the new ROM just use some cleaning script such as Ultimate KErnel Cleaning Script. In Galaxy Note I used Jbroid Kernel Script. I aint sure now if you can use Jbroid in Ace.
Goof luck!
Press Thanks

I got it working, what I had to do was flash CM7, then CM9 then CM10 :/ after that it was fine Thanks for the help

Welcome

The problem was with the kernel being different in CM10 and official version.

realzahed said:
The problem was with the kernel being different in CM10 and official version.
Click to expand...
Click to collapse
Please ask CM9 and CM10 questions here:
http://forum.xda-developers.com/showthread.php?t=1742844

[SOLVED] Rooted Exhibit Stuck in Bootloop!

Hi,
I tried installing the Chimera kernel on my sister's Exhibit and after it installed and rebooted, the phone was stuck in the CM10 boot animation. The phone has CM10 installed and it does get past the Samsung logo.
The thread for Chimera tells us to make a Nandroid but I didn't bother as when I installed Chimera on my Exhibit, all was well. So, there is no Nandroid to restore to on this phone.
Is flashing a new ROM the only option?

I'm having this same problem after I flashed everything. my rom, cache, data, delvik+cache, etc...

ScoobSTi said:
Hi,
I tried installing the Chimera kernel on my sister's Exhibit and after it installed and rebooted, the phone was stuck in the CM10 boot animation. The phone has CM10 installed and it does get past the Samsung logo.
The thread for Chimera tells us to make a Nandroid but I didn't bother as when I installed Chimera on my Exhibit, all was well. So, there is no Nandroid to restore to on this phone.
Is flashing a new ROM the only option?
Click to expand...
Click to collapse
Just dirty flash CM10 to delete the kernel.

But I can't even get into CWM...

Deefex said:
But I can't even get into CWM...
Click to expand...
Click to collapse
I was talking to Scoob.
You need to press volume up and power to get in to recovery. Volume down and power is download(Odin) mode.

Dirty flashing is flashing without wiping, right?
And if I do this, I'm guessing she will lose all her files etc.?

ScoobSTi said:
Dirty flashing is flashing without wiping, right?
And if I do this, I'm guessing she will lose all her files etc.?
Click to expand...
Click to collapse
Wipe dalvik cache, cache and then flash CM10 and gapps. Hopefully, everything will still be there.

Ok, I'll try that. I just have one more question, does the CM10 have to be the same as the one currently installed? It's an older version and I don't have the same ZIP, so I'll have to download a newer version.

ScoobSTi said:
Ok, I'll try that. I just have one more question, does the CM10 have to be the same as the one currently installed? It's an older version and I don't have the same ZIP, so I'll have to download a newer version.
Click to expand...
Click to collapse
A newer version should be okay. As long as it is CM10.

It works! I just thanked all your posts in here.
Thank you very much sir!

CWM Restore Problem

So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?

leo10messi said:
So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?
Click to expand...
Click to collapse
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.

Im having a similar issue
Hi! the same is happening to me, but im sure i flashed the right gapps from cwm. also, i tryed to restore a previous back up, the restore seems succesfull but when i boot i still see the setup wizard, even when i flash the right gapps after restore. I tryed cleaning caché, doing a factory reset. I dont know what else to do. The last thing i was doing with my working phone was trying (but i uninstalled it after a while) swapper2. but i letft my sd card only with fat32 as in the begining.

shut_down said:
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.
Click to expand...
Click to collapse
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/

leo10messi said:
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/
Click to expand...
Click to collapse
Try to install gapps for 4.1.2 JB.

shut_down said:
Try to install gapps for 4.1.2 JB.
Click to expand...
Click to collapse
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?

leo10messi said:
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?
Click to expand...
Click to collapse
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
P.S. Solution for someone was to flash some custom ROM. Try with that.
Sent from my GT-I9070 using Tapatalk

shut_down said:
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Ok mate let me know if you find the solution Thanks

At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...

jazzh said:
At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...
Click to expand...
Click to collapse
Put CoCore with TWRP on SD and install it from CWM.

I had same problem. I never use GAPPS, so I have not flashed the zip. Still I encountered this strange problem.
I found two possible methods which may help.
To restore 'stock JB backup' you must flash CM 10.1(4.2.2) or CM 10(4.1) and make sure you wipe data,cache and dalvik-c before and after flashing.
The from CM 10.1/10 recovery restore the stock JB backup.
If that did not work, the use ODIN to flash the stock JB firmware and then flash custom recovery. With this recovery you can restore either data or all of the partitions. GOOD LUCK

shut_down said:
Put CoCore with TWRP on SD and install it from CWM.
Click to expand...
Click to collapse
And what will I get, permanent twrp ? If yes, then that's it.

jazzh said:
And what will I get, permanent twrp ? If yes, then that's it.
Click to expand...
Click to collapse
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
can i restore my cwm backups from TWRP?
---------- Post added at 08:19 PM ---------- Previous post was at 08:12 PM ----------
well... after installing cocore with TWRP and then flashing gapps 4.1.2 from there, the problem persist. As i said before, after flashing stock rom from odin, then gapps from any recovery, the problem persist. wt* am i doing wrong!?
let me remember you, I am not who started this thread, but i have a similar issue.
Thanks
Edit: in order to bring you clues in case you may help me. I noticed that the keyboard doesnt show up if i try to write the password of the wi-fi network in setup wizard, also gapps still crashing as soon the phone boots and setup wizard after i try to skip it.
later edit: HEY HEY HEY! i noticed in "show log" option in cwm that after restoring the backup there are two issues:
I: Can't format unknow volume: /external_sd
I: Can't partition unsafe device: /dev/block/mmcblk0p8
hmmm... i didn't expect that.

keep updating: both cyanogen 10.0 and 10.2 don't even boot. they stay stucked in the pretty loading screen.
didn't find anything helpfull to do from recovery or odin
any clue?

just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....

alete89 said:
just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....
Click to expand...
Click to collapse
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.

shut_down said:
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.
Click to expand...
Click to collapse
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.

alete89 said:
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.
Click to expand...
Click to collapse
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.

shut_down said:
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.
Click to expand...
Click to collapse
nono, i have I9070. 100% sure.