Database Develop

[Q] x8 new ROM problem, need help

Hi guys, I'm having trouble with new ROM installation. I've been using Gingercruzt ROM since last spring with stock kernel. Bootloader is not unlocked, I've only rooted the phone. It's been working fine until I decided that I want to try something new today. I downloaded the GingerDX rom and installed it with CWM. Everything went fine and I rebooted the system. The phone didn't start, it got stuck on the SE logo. I couldn't enter CWM or xRecovery anymore. It bricked. Using SEUS I brought back the stock rom. I rooted the phone again, installed newer version of CWM from the toolkit, etc. I downloaded the zip again, installed it again - it bricked the phone the same way. Then I tried with two different roms - FroyoPro and Free Dom experience with full wipes on everything before installing - same thing, doesn't start. I was able to enter xRecovery with FroyoPro but no CWM and it get stuck at rom's loading screen.
Help please, what happened to my phone Why doesn't it load a ROM like it did yesterday?
Thanks in advance!

vgaBG said:
Hi guys, I'm having trouble with new ROM installation. I've been using Gingercruzt ROM since last spring with stock kernel. Bootloader is not unlocked, I've only rooted the phone. It's been working fine until I decided that I want to try something new today. I downloaded the GingerDX rom and installed it with CWM. Everything went fine and I rebooted the system. The phone didn't start, it got stuck on the SE logo. I couldn't enter CWM or xRecovery anymore. It bricked. Using SEUS I brought back the stock rom. I rooted the phone again, installed newer version of CWM from the toolkit, etc. I downloaded the zip again, installed it again - it bricked the phone the same way. Then I tried with two different roms - FroyoPro and Free Dom experience with full wipes on everything before installing - same thing, doesn't start. I was able to enter xRecovery with FroyoPro but no CWM and it get stuck at rom's loading screen.
Help please, what happened to my phone Why doesn't it load a ROM like it did yesterday?
Thanks in advance!
Click to expand...
Click to collapse
Did u cleared 'dalvik-cache' in case of froyopro & when u are stuck at 'Sony Ericsson' logo did u checked that u have downloaded thi Rom zip for 'stock kernel' I think this the problem download zip for stock kernel
Hit thanks if this helped u
sent from my W8 using client-server technology

Yes, I cleared all the possible caches, system and other folders. I even formated my sd card, just in case...
I downloaded all the right roms for stock kernel, all three of them. As I said, I've done this before and it worked from first try.
Thanks for trying to help me!

vgaBG said:
Yes, I cleared all the possible caches, system and other folders. I even formated my sd card, just in case...
I downloaded all the right roms for stock kernel, all three of them. As I said, I've done this before and it worked from first try.
Thanks for trying to help me!
Click to expand...
Click to collapse
You should not format /system, cause you are actually removing recovery+rom
& are you sure that froyopro supports stock kernel?
Sent from my ULTIMATE using Tapatalk 2

jay-z-s said:
You should not format /system, cause you are actually removing recovery+rom
& are you sure that froyopro supports stock kernel?
Sent from my ULTIMATE using Tapatalk 2
Click to expand...
Click to collapse
yup froyopro support stock

vgaBG said:
Yes, I cleared all the possible caches, system and other folders. I even formated my sd card, just in case...
I downloaded all the right roms for stock kernel, all three of them. As I said, I've done this before and it worked from first try.
Thanks for trying to help me!
Click to expand...
Click to collapse
Then don't format /system
sent from my W8 using client-server technology

try to redownload the rom. flash it again after a full wipe, then reboot.
signature under repair

I cleared the system folder before flashing a new ROM just to make sure I have deleted the stock ROM.
I tried with three different new ROMs, none of them started. Strange thing... everything goes well with the install and then it just won't turn on.
Do you think it's going to be different If I try to unlock the bootloader and flash nAa's kernel? I don't really want to do that but the phone is manufactured before the 29th week so it's capable.

are you sure it doesnt turn on?,first boot may take some minutes...

Yeah, I know, I've left it for more than 15 minutes with any of the tried roms.
I think I should write down the steps I'm taking after the flash back to stock rom with SEUS.
1. Activating debugging mode and unknown applications.
2. I already have the Android SDK, adb server and drivers from before so I open SuperOneClick and root the phone. Busybox is installed and Superuser is on. Everything goes smoothly during the process.
3. Using x8toolkit I install xRecovery and CWM via Dualrecovery.
4. Reset and entering CWM. Full wipe, install from zip, installation goes without problems and says - Go on buddy, restart and start using
5. Reset, Sony Ericsson logo and that's it. Nothing more happens. With GingerDX and Free Dom experience I can't enter recovery any more. FroyoPro's starting screen shows up after the SE logo but that's all it does - it never goes any further. I can enter xRecovery but no CWM.
I tried installing roms with both xRecovery and CWM - all the same. Could it be some physical damage even though the stock rom runs perfectly well? I don't know, I'm a bit desperate as the battery lasts half a day with the stock rom.

Just to end this thread, nothing worked for me so I unlocked the bootloader, flashed nAa's kernel and got a new ROM compatible with it - it works like a charm now. Thanks for your support guys!

Softbrick N7000 Need Help

When my phone boots it only gets to the samsung logo
I am able to use the recoverymode and downloadmode.
Wiping data won´t work. Wiping cache works.
Can´t flash a CustomROM from my SDcard through CWM
I was able to connect my phone to the PC. ADB finds the phone but adb shell won´t work. (No such file or directory <2>)
How can I install either a regular Androidversion or a CustomROM now.
found this but only for Galaxy S3, so the files won´t help me
http://forum.xda-developers.com/showthread.php?t=1840030
Hope you can help me
Tobias

Download a Stock Rom from sammobile.com or one of the prerooted Roms (I always use a GB LC1 from bodivas for this) and install it with the PC version of Odin.

tried that, Odin stops at "NAND write start!!"

AW: Softbrick N7000 Need Help
What Rom did you have and what did you do before this happened?
Sent from my GT-N7000 using xda premium

Now I used a regular Android 4.0.4. ROM
Before that I tried with a 2.3.1 ROM. This is probably the reason for the trouble, isn´t it?

Tobias H. said:
tried that, Odin stops at "NAND write start!!"
Click to expand...
Click to collapse
I wrote to download a new rom and to try it with Odin. 15 min later you said: did this.
So I want to ask: Did you really download a new Rom or did you use one you had already?
And what Rom exactly?
And what did you do before stopping at boot logo?

ThaiDai said:
I wrote to download a new rom and to try it with Odin. 15 min later you said: did this.
So I want to ask: Did you really download a new Rom or did you use one you had already?
And what Rom exactly?
And what did you do before stopping at boot logo?
Click to expand...
Click to collapse
I was already downloading the 4.0.4. ROM. Because I read somewhere it´s not possible to go from ICS to Gingerbread.
The download just finished right after you answered and I tried. I am 100% sure i got the right ROM.
Before getting all these Problems, I wanted to get a CustomROM on my phone. Android 4.0.4 was installed at that point of time.
I rooted my phone and did a backup with CWM. Then i chose wipe data, while doing that I started to charge my phone (I don´t know if that matters). I didn´t see what happen exactly because i wasn´t looking at my phone all the time, but when i looked at it again there was only the charging sign shown. Then I tried to get into recoverymode again. This wouldn´t work. I tried to flash CWM with Odin which worked after some time. Then I tried to Wipe data and cache again. wipe data wouldn´t work. Wipe cache worked. I tried to install the backup. After waiting for more then 1 hour it looked like nothing happend and the installation was stuck. But the regular recovery of Android was installed.
Because flashing a ROM through CWM wouldn´t work, I tried to flash it through Odin. First time I tried with a Gingerbread Version. I was thinking, I don´t care which version as long as it works and try again to install a CustomROM from there on. Odin stopped at NAND Write Start!!. Tried it with the ICS Stock version. Same thing.
This is where I am at now

Did you use cwm.zip?

To use with Odin? No
When I started it from the regular Android Recoverymode? Yes
Don´t you think this might be exactly the problem I have?
http://forum.xda-developers.com/showthread.php?t=1840030

Tobias H. said:
I was already downloading the 4.0.4. ROM. Because I read somewhere it´s not possible to go from ICS to Gingerbread.
The download just finished right after you answered and I tried. I am 100% sure i got the right ROM.
Before getting all these Problems, I wanted to get a CustomROM on my phone. Android 4.0.4 was installed at that point of time.
I rooted my phone and did a backup with CWM. Then i chose wipe data, while doing that I started to charge my phone (I don´t know if that matters). I didn´t see what happen exactly because i wasn´t looking at my phone all the time, but when i looked at it again there was only the charging sign shown. Then I tried to get into recoverymode again. This wouldn´t work. I tried to flash CWM with Odin which worked after some time. Then I tried to Wipe data and cache again. wipe data wouldn´t work. Wipe cache worked. I tried to install the backup. After waiting for more then 1 hour it looked like nothing happend and the installation was stuck. But the regular recovery of Android was installed.
Because flashing a ROM through CWM wouldn´t work, I tried to flash it through Odin. First time I tried with a Gingerbread Version. I was thinking, I don´t care which version as long as it works and try again to install a CustomROM from there on. Odin stopped at NAND Write Start!!. Tried it with the ICS Stock version. Same thing.
This is where I am at now
Click to expand...
Click to collapse
Why did u buy SGN? To brick it?
Do you even read and search before doing something for the first time?
LOOK, READ AND LEARN THIS for stock ROMs and kernels, specialy for ICS:
- http://forum.xda-developers.com/showthread.php?t=1424997
-http://forum.xda-developers.com/showthread.php?t=1371007
-http://forum.xda-developers.com/showthread.php?t=1827394
To run ur device find something and READ.
Try leaked JB custom ROM and stock rooted kernel with safe emmc_cap_erase block (emmc bug fix) -Philz Kernel
READ and LEARN.
Have fun
P.S. Maybe you will need our friend hg42 and his famous .PIT files so here it is: http://forum.xda-developers.com/showthread.php?t=1667886

did i just get the emmc-bug?

sorry if this has been asked, tried looking around but couldnt find anything looking like my problem.
this morning i updated to beerbongs paranoid android 3.00, and after that i couldnt see my sd-cart, so i thought that was the problem. but after looking around for a bit it seems that its actually emmc thats gone missing. phone still boots though (sometimes after a couple of tries though).
anyway, i used emmc brickbug check and it saying theres no problem. i tried another checker where you use a .zip in recovery, which also stated that there are no problems. but i cant mount emmc in recovery or in android. sd-card can be found in recovery, and in android when using es file explorer.
do i have a softer version of the emmc brickbug, or whats going on here? how can i fix this, if at all?

May be rom flash was not right or this is a bug.. Don't know. This rom is RC so... Try flashing the rom again using proper format commands.

nokiamodeln91 said:
May be rom flash was not right or this is a bug.. Don't know. This rom is RC so... Try flashing the rom again using proper format commands.
Click to expand...
Click to collapse
ive tried installing an older version. i tried installing it again. i tried a backup. i tried installing another kernel. nothing seem to work.

Nothing seem to work?
What does that mean? You can't install or can mount the emmc on any?
Try going back to stock rom and check. Do not wipe on stock is kernels.

nokiamodeln91 said:
Nothing seem to work?
What does that mean? You can't install or can mount the emmc on any?
Try going back to stock rom and check. Do not wipe on stock is kernels.
Click to expand...
Click to collapse
installing works just fine, but i cant get emmc back up. havent tried going back to stock yet, since im not yet 100% clear on how i do this without messing things up more (reading up on it though).

Try flashing this already rooted Gingerbread ROM from Dr.Ketan http://d-h.st/HJM and then you can do full wipe on it and later flash the ROM you want..
Its probably easier than going to ICS stock then flashing safe kernel and then the ROM you want..

Rivan_92 said:
Try flashing this already rooted Gingerbread ROM from Dr.Ketan and then you can do full wipe on it and later flash the ROM you want..
Its probably easier than going to ICS stock then flashing safe kernel and then the ROM you want..
Click to expand...
Click to collapse
yea i did this following a "how to root" guide. dont understand why emmc and sd-card wasnt showing, but at least its working now. gave me a bit of a scare.

[Q] HELP - Softbrick Galaxy Tab 8.9 Telstra p7320

Hi guys, having some serious issues with my Tab. It's the Telstra GT-P7320T.
So I had it rooted and flashed with the glitkis kernel all working fine still on the standard Telstra version of honeycomb. Then when their update for ICS finally came out (after nearly 6 months of knocking it back) I went to update it in the normal manner, not thinking it would have a hissy fit with the root and the custom kernel.
So after it downloaded it did its pre install bit, it rebooted, but then loaded into CWM recovery, and thats where its stayed. I've tried factory resets, clearing and formatting all the caches (davlik, system etc) i've used adb to push a few different roms and kernels etc to the device but nothing ive tried has worked. I flashed arlics ics rom, but it still just boots into recovery. Ive tried flashing the stock kernel and stock recovery but when i try to install zip from sd them they fail "install aborted (bad)"
Anyone got any ideas on what process and files I should try? Ive searched up and down the forum trying different methods for fixing soft brick and returning to stock but to no avail.
Cheers

ragvaror said:
Hi guys, having some serious issues with my Tab. It's the Telstra GT-P7320T.
So I had it rooted and flashed with the glitkis kernel all working fine still on the standard Telstra version of honeycomb. Then when their update for ICS finally came out (after nearly 6 months of knocking it back) I went to update it in the normal manner, not thinking it would have a hissy fit with the root and the custom kernel.
So after it downloaded it did its pre install bit, it rebooted, but then loaded into CWM recovery, and thats where its stayed. I've tried factory resets, clearing and formatting all the caches (davlik, system etc) i've used adb to push a few different roms and kernels etc to the device but nothing ive tried has worked. I flashed arlics ics rom, but it still just boots into recovery. Ive tried flashing the stock kernel and stock recovery but when i try to install zip from sd them they fail "install aborted (bad)"
Anyone got any ideas on what process and files I should try? Ive searched up and down the forum trying different methods for fixing soft brick and returning to stock but to no avail.
Cheers
Click to expand...
Click to collapse
hey mate,
i was just caught out by this last night. all you need to do is re-flash on a stock rom with ether oden of heimdall and youre good to go. im sure there is a oden flashable rom on these forums
take it sleazy!

Cheers mate,
Ive been trying to reflash a stock rom by pushing it to the sd card and installing it, but when i go to install it from recovery it tells me the rom file is bad and aborts, like its corrupt or something, so maybe i need to find some different downloads to try. Thanks, there's hope still at least, lol. I'll find the odin file and try doing it that way.

ragvaror said:
Cheers mate,
Ive been trying to reflash a stock rom by pushing it to the sd card and installing it, but when i go to install it from recovery it tells me the rom file is bad and aborts, like its corrupt or something, so maybe i need to find some different downloads to try. Thanks, there's hope still at least, lol. I'll find the odin file and try doing it that way.
Click to expand...
Click to collapse
yeah, i think its becaute the cwm recovery doesnt know what to do with the update.
you need to have the stock recovery installed. dont take my word for it though.
just look up a tutorial for flashing a rom via oden. its really easy, just make sure the image you are flashing is of .tar.md5 extension.

You can get the stock rom at sammobile.com. down load the zip file then extract the .tar.md5 file out of it using 7-zip.
God promised men that he'd put beautiful women in all corners of the world. Then he laughed and laughed and made the world round

FIXED!! - Cheers Everyone!
OK, so I downloaded the stock telstra rom off the forum here, its at the top of page 3 at present, flashed that with Oden, which fixed the soft brick and allowed me to boot again. I then flashed the stock recovery, rebooted, got into the system and downloaded the ICS update again. Once it rebooted, with the stock recovery it was able to install and successfully boot into ICS!! I was more stoked than I've ever been before, let me tell you, lol.

how ?
ragvaror said:
FIXED!! - Cheers Everyone!
OK, so I downloaded the stock telstra rom off the forum here, its at the top of page 3 at present, flashed that with Oden, which fixed the soft brick and allowed me to boot again. I then flashed the stock recovery, rebooted, got into the system and downloaded the ICS update again. Once it rebooted, with the stock recovery it was able to install and successfully boot into ICS!! I was more stoked than I've ever been before, let me tell you, lol.
Click to expand...
Click to collapse
i currently have the same problem as you did, how did you flash with odin if you're stuck in recovery mode ?
please help, I'm racking my brain trying to figure this out.

[Q] stucked after a fail with odin

Hi everybody,
just got an old yet effective SGS and I wanted root and get rid of touchwizz and all the crap from my carrier
I was unable to boot into DL mode, i tried everything, so I had to do it with adb reboot
I never had to use Odin to do my hacking with android so i'm not used to it but short story : I rename my rom.zip into rom rom.tar, it failed and all I have is this now :
https://www.dropbox.com/s/wk42jbmp33a3ftu/IMG_20140715_152917.jpg
Also I need to unsimlock, flashing a new rom will also do the trick right ?
thanks

What you just did is bricking your phone. It it was a zip file you need to install it from the recovery. Renaming it is not the way it works. I'm not sure if now you can fix it. Sorry, man
Sent from my GT-I9000 using XDA Premium 4 mobile app

Do you know what I can at least try?

If you can get into download mode:
Follow sections 2 and 3 in this guide.
If you can't:
Follow this guide and after that do what I sails to do if you have download mode.

Does 3-button-combo not work to get into the download mode?
(power & home & volume down)
tetakpatalked from Nexus 7 flo

so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys

@Idealith simlock has nothing to do with the firmware.
You need now any root kernel for that firmware, it has to be compatible with the intiframs of your 2.x version and it will give you a custom recovery.
There you can flash first CM10.2 to get the modified partition sizes and KK ready recovery and after that you can flash CM11
IMHO, the new Mackay ICS 2014 rom based on CM9 is a lot faster than any KitKat and works better on the i9000
tetakpatalked from N7100

my question about the rom still applies cause this one is awful
but with what does it have to do then ?
EDIT : my browser didn't render the end of your answer
I'm afraid i'm not following though :/

I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/

Idealith said:
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Click to expand...
Click to collapse
Hey, could you tell me which country you are at? I could then take a few steps to help you
PFFFFFFFFFFFFFFFFTTT, sent from my i9000

I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks

Idealith said:
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Click to expand...
Click to collapse
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo

tetakpatak said:
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works

Idealith said:
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Click to expand...
Click to collapse
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100

tetakpatak said:
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
Click to expand...
Click to collapse
and how do i get that bootloader set up ?

Idealith said:
and how do i get that bootloader set up ?
Click to expand...
Click to collapse
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100

tetakpatak said:
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
Click to expand...
Click to collapse
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?

Idealith said:
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Click to expand...
Click to collapse
Ask your carrier, I assume the phone contract isn't new anymore (or expired) so you'll get unlock code for free. Here in Europe one can obtain the unlock code after 2 years for free.
Otherwise you can ask one of the online unlock services, it costs usually around 15-20$ to get the code
tetakpatalked from N7100

Idealith said:
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
Click to expand...
Click to collapse
I'm glad that the JIG helped you (I know I'm late )

danielbe said:
I'm glad that the JIG helped you (I know I'm late )
Click to expand...
Click to collapse
yeah that worked like a charm
it was a good idea to buy it, i would have use the resistors so much
is there a more xda way to unlock it ? my carrier wants me to send the phone and have it unlock, they won't just provide the code :/