Database Develop

[Q] Samsung Galaxy S1 I9000 Stuck At Galaxy S Boot Screen Can't Get Into Recovery?

Hey,
I tried flashing a new kernal via Odin but my laptop switched off halfway through and now when I switch on my Galaxy S1 (i9000) it get's stuck at the Galaxy S GT-I9000 Samsung screen . I can't get it into recovery although I can access download mode and it is recognized in Odin. I think it should just be as simple as reflashing the PDA, MODEM and CSC file through Odin although If anyone can help me acquire these stock files or by using any other methods to restore my phone back to normal It'll be greatly appreciated.
Regards,
Ainaa

http://forum.xda-developers.com/showthread.php?t=1102881

Donovan662 said:
http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
Thanks :good:, I'm, checking now. Which exact pit file do I use? I assume anyone of the three (512,513,803) will work right? And do I have to check any other options? Thanks for all the help so far.
Regards,
Ainna

No it didn't work If anyone helps I'll be eternally grateful.

enya123101 said:
No it didn't work If anyone helps I'll be eternally grateful.
Click to expand...
Click to collapse
512

How long is the first boot supposed to take? Thanks,

Oh and does anyone know where to get the stock bootloader for the Galaxy s i9000? Thanks,

enya123101 said:
Oh and does anyone know where to get the stock bootloader for the Galaxy s i9000? Thanks,
Click to expand...
Click to collapse
you can get from My Android Collections and or a solution from My Android Solutions or use a rescue kit
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

Thanks for all the help guys but still no luck .
I've tried what you've said xsenman by using the ezboot recovery tool although its still not booting up. It gets to this screen and then stops;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?
Regards,

enya123101 said:
Thanks for all the help guys but still no luck
Click to expand...
Click to collapse
Just go into download mode and flash the ROM again for your Model , all ROMS, are available in My Android Collections

I've flashed the EZboot recovery and then I installed the CFRoot rom although it still keeps getting stuck at the start screen. During the Odin flashing part it says it's passed with no failures but it still won't start.

..

Donovan662 said:
..
Click to expand...
Click to collapse
I live in the west midlands, if any one ahs any ideas please post them as at this point I'm willing to try anything,

Take simcard & sd card out phone
Flash this stock rom with odin:
http://db.tt/5BvokeDa
with the pit and repartition checked

I'm trying your rom now Donovan, thanks. How long on average do I have to wait for the first boot?

enya123101 said:
I'm trying your rom now Donovan, thanks. How long on average do I have to wait for the first boot?
Click to expand...
Click to collapse
Mostly if I go back 2 stock it takes Max 20 min. When it pass it should reboot from itself

It still isn't working Donovan, thanks for all your help so far though, any more suggestions?

Does it pass in odin? Does it reboot after pass, does it install something after Samsung logo? Or does it reboots and hangs in Samsung logo right away?

It passes in Odin and then it just hangs at the first boot screen like the picture on page 1. I still can't get into recovery and for some reason to get into download mode I press the down volume key and the side sleep button without having to press the OK button.
Regards,

enya123101 said:
It passes in Odin and then it just hangs at the first boot screen like the picture on page 1. I still can't get into recovery and for some reason to get into download mode I press the down volume key and the side sleep button without having to press the OK button.
Regards,
Click to expand...
Click to collapse
Try flash http://db.tt/2EoHMD53 with odin Pda section. Then try get into recovery. (volume up home button and side button) If not...
Try flash http://db.tt/MTCix9lL with odin Pda section. Then try to het into recovery. If not...
Check this http://forum.xda-developers.com/showthread.php?t=1841250 see problem 8

[Q] N7000 dead? No download mode? Nothing...

Hi
A french member from my forum has a big problem with his N7000.
He had PARANOIDANDROID v2.+ (v2.56)Utacka - J.B : 4.1.2
He flashed this firmware: http://www.hotfile.com/dl/164510335/d5dc587/N7000XXLRK_N7000DBTLRK_DBT.zip.html
Bootloop on Samsung logo so he tried a Wipe data but rebooting into recovery mode he had:
# MANUAL MODE #
-- Appling Multi-CSC...
E:failed to mount /sytem (Invalid argument )
can't mount '/system (Invalid argument)
E:failed to mount /sytem (Invalid argument )
Click to expand...
Click to collapse
Now he doesn't have any access to the download mode and only a black screen...
Is there any solution for him?
Thanks a lot!
EDIT
He tried with a JIG USB but nothing more.

Does the jig get him to download mode?

No...

He has hard bricked his phone.
Have him try this..keep the back cover off so can easily remove and replace battery. Make sure battery is still charged.
1. Remove battery for about 5 seconds
2. Plug in jig and replace battery with jog in
3. WAIT. Don't do anything. It may take a couple minutes.
4. Hold power button for 5 seconds then immediately remove the jig. Let go of power button
5. Hold power button now for 20-30 seconds.
6. Remove battery again for 5 seconds and then replace it
7. Quickly hold power - home - volume down - hold it for 20 seconds or so until you get to download mode screen
Please report back if doesn't work.
Sent from my GT-N7000000000 using Tapastalker 2
---------- Post added at 09:31 PM ---------- Previous post was at 09:30 PM ----------
Try not to let Tue battery die while trying this or he will have to get it charged on someone else's phone just to to try this
Sent from my GT-N7000000000 using Tapastalker 2

Thanks buddy!!!
I'm going to give these steps to my friend and I'll come back to you asap.

No news... Sorry...

Let me know... I will check this thread once a day
Sent from my Amazon Kindle Fire using Tapatalk 2

I believe I'm having the same problem. I can't enter download / recovery mode: all I get is a black screen (also when the phone is charging). Since I had some issues with my microusb connector before, I tried replacing it. Didn't help. Replacing battery didn't help as well.

Memphis_ said:
No news... Sorry...
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=1667886&highlight=hg42
And there can be a HARD BRICK but if u have a good electrician and if dev. Adam Outler could help u can un brick phone with only 2gb vanish from 16/32 gb or maybe not even with that.
Please make me a know is this was helpfull.
Sry for bad english...

Sale_zg said:
Try this: http://forum.xda-developers.com/showthread.php?t=1667886&highlight=hg42
And there can be a HARD BRICK but if u have a good electrician and if dev. Adam Outler could help u can un brick phone with only 2gb vanish from 16/32 gb or maybe not even with that.
Please make me a know is this was helpfull.
Sry for bad english...
Click to expand...
Click to collapse
This advice is useless right now. They can NOT get in to download mode.
Sent from my Amazon Kindle Fire using Tapatalk 2

I have a feedback
So he tried with 2 batteries fully charged with the steps you provided.
1. Remove battery for about 5 seconds
2. Plug in jig and replace battery with jog in
3. WAIT. Don't do anything. It may take a couple minutes.
Click to expand...
Click to collapse
He tells me that there are no reactions when he removes the battery and pluges in the JIG and remplaces the battery (even after 1 hour )
Normally after step 3, he should see something on the screen. I think that he did all the remaining steps but in vain...
4. Hold power button for 5 seconds then immediately remove the jig. Let go of power button
5. Hold power button now for 20-30 seconds.
6. Remove battery again for 5 seconds and then replace it
7. Quickly hold power - home - volume down - hold it for 20 seconds or so until you get to download mode screen
Click to expand...
Click to collapse
Thanks.
EDIT
Is it useful to flash via Odin even if he doesn't have the download mode? What about flashing with this Kernel and pit files? And ADB (I don't have enough knowledge for that...)

No other possibility to solve this problem? (warranty expired)
Thanks.

Memphis_ said:
No other possibility to solve this problem? (warranty expired)
Thanks.
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=1354888
This will restore bootloader.
Read carefully the instructions given. You may enter download mode even if the screen is black.

We'll try. Thanks.

Access to download and recovery mode...
Flash of Hydracore v7 kernel in process...

Please I need your help. My friend has flashed the SAFE Kernel but he has the yellow triangle:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems that boot doesn't work. (no access to the main menu)
He did a wipe data but nothing better.
Can he try a format /system (via CWM) and flash a full ROM (via Odin) to avoid this freeze?
Thanks a lot!!!

Yellow triangle is from flashing hydravore via odin... it doesnt matter because it just affects warranty...use triqngoe away.
Yes flash stock rooted GB via pc odin is best optiin. It is on dr.ketan thread
Sent from my GT-N7000000000 using Tapastalker 2
---------- Post added at 09:17 PM ---------- Previous post was at 09:17 PM ----------
First wipe data system cache and preload
Sent from my GT-N7000000000 using Tapastalker 2

Could you suggest me a rooted GB Rom. I only find Stock GB ROM...
EDIT
Older Gingerbread ROMs (Directly Rootable) found here, right?
Ex: N7000XXKJ4 ------ 2.3.5 2011 october-------- N7000OXXKJ4 ---------------------Switzerland

I believe so...worst case scenario if it isnt rooted you can OTA to ICS and flash philz kernel from stock recovery to root without any potential for harm
Definitely start witg the GB though considering all the issues you have had
Sent from my GT-N7000000000 using Tapastalker 2

Crossed fingers

[Q] phone stuck in bootloop

my phone is stuck on bootloop
im useing CM 10.1 nightly and for the past couple of days my phone just shut itself down without any apparent reason
yesterday my phone allmost lost all its battery so i shut it down because i needed it later, a few hours later i turned it on and use it a little bit (it was on about 20% battery) and then it just shuted down on its own, when i tryed to turn it back on it was stuck on bootloop
it doesn`t get past the part screen were it says GALAXY S GT-I9000 SAMSUNG
i cant get it to boot into recovery mod, and when i try to get it into download mod it warks but about 5 secounds later it gets back to the bootloop
does any one have any idea how to fix it?

itamarshami said:
my phone is stuck on bootloop
im useing CM 10.1 nightly and for the past couple of days my phone just shut itself down without any apparent reason
yesterday my phone allmost lost all its battery so i shut it down because i needed it later, a few hours later i turned it on and use it a little bit (it was on about 20% battery) and then it just shuted down on its own, when i tryed to turn it back on it was stuck on bootloop
it doesn`t get past the part screen were it says GALAXY S GT-I9000 SAMSUNG
i cant get it to boot into recovery mod, and when i try to get it into download mod it warks but about 5 secounds later it gets back to the bootloop
does any one have any idea how to fix it?
Click to expand...
Click to collapse
Try charging the phone fully. Then go to bootloader and factory reset

.jRay. said:
Try charging the phone fully. Then go to bootloader and factory reset
Click to expand...
Click to collapse
by factory reset you mean go back to one of samsung offical roms or just wipe data?

itamarshami said:
by factory reset you mean go back to one of samsung offical roms or just wipe data?
Click to expand...
Click to collapse
First try wiping data if it works. Otherwise go to official roms

.jRay. said:
First try wiping data if it works. Otherwise go to official roms
Click to expand...
Click to collapse
OK thanks, i`ll give it a few hours to charge and give it a try
but as i said i can`t get into recovery mode, do you think that if the phone will be fully charged it will let me get into recovery mode?

Flash recovery again after charging

it seem like u upgrading from 2.3.6 straight to 4.2 rite?
Sent from my GT-I9000 using xda premium

.jRay. said:
Flash recovery again after charging
Click to expand...
Click to collapse
i let the phone charge for a few hours but i still can`t get it into recovery mode nor download mode and i also can`t get it to turn on, it still stuck on bootloop
compacity said:
it seem like u upgrading from 2.3.6 straight to 4.2 rite?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
no, i upgraded from 2.3.3 to 2.3.6, then to 4.1.2 (CM 10 stable) then to 4.2.2 (CM 10.1 nightly)

itamarshami said:
i let the phone charge for a few hours but i still can`t get it into recovery mode nor download mode and i also can`t get it to turn on, it still stuck on bootloop
Click to expand...
Click to collapse
Did you flash recovery again?
Via bootloader

itamarshami said:
i let the phone charge for a few hours but i still can`t get it into recovery mode nor download mode and i also can`t get it to turn on, it still stuck on bootloop
no, i upgraded from 2.3.3 to 2.3.6, then to 4.1.2 (CM 10 stable) then to 4.2.2 (CM 10.1 nightly)
Click to expand...
Click to collapse
so i m rite, da safest way is to take a break at cm9 first.cm7>cm9>cm10 or 10.1 using highway to save time will coz u more when stuck at tjam
anyway, i ve heard there's some user succesfully upgraded from 2.3.6 straight to 4.1, but they will come here asking for problem solution later
anyway go back down to firmware again n go up step by step.

.jRay. said:
Did you flash recovery again?
Via bootloader
Click to expand...
Click to collapse
do you have any good guide on how to do that? the only one i found says i need to put the phone into download mode, and i can`t get the phone to stay in download mode for more then 5 seconds

itamarshami said:
do you have any good guide on how to do that? the only one i found says i need to put the phone into download mode, and i can`t get the phone to stay in download mode for more then 5 seconds
Click to expand...
Click to collapse
Try. Turning it off. Then holding volume up and down then plug in without pressing power button

compacity said:
so i m rite, da safest way is to take a break at cm9 first.cm7>cm9>cm10 or 10.1 using highway to save time will coz u more when stuck at tjam
anyway, i ve heard there's some user succesfully upgraded from 2.3.6 straight to 4.1, but they will come here asking for problem solution later
anyway go back down to firmware again n go up step by step.
Click to expand...
Click to collapse
i used some guide that iv`e seen and it said that i should get the 2.3.6 then install CM 10 and the CM 10 had no problems, i haven`t used CM 7/9 before
but do you know how i can go downgrad my phone to 2.3.6 again? i cant get it to turn on nor can i get to recovery mode or to stay on download mode for more then 5 seconds
.jRay. said:
Try. Turning it off. Then holding volume up and down then plug in without pressing power button
Click to expand...
Click to collapse
the second i put the battery in the phone it starts the boot without me pressing anything so i cant actully keep it turned off
i tried pressing the volume down and the home bottun and only then puting the battery in but it still just got into download mode for about 5 seconds and then try to restart itself

Thats a very wierd problem..

itamarshami said:
i used some guide that iv`e seen and it said that i should get the 2.3.6 then install CM 10 and the CM 10 had no problems, i haven`t used CM 7/9 before
but do you know how i can go downgrad my phone to 2.3.6 again? i cant get it to turn on nor can i get to recovery mode or to stay on download mode for more then 5 seconds
the second i put the battery in the phone it starts the boot without me pressing anything so i cant actully keep it turned off
i tried pressing the volume down and the home bottun and only then puting the battery in but it still just got into download mode for about 5 seconds and then try to restart itself
Click to expand...
Click to collapse
What you could try is get 2.3.6 ready in Odin, plug the phone into your computer via USB, insert the battery and go into download mode. Then as soon as you see the download icon in the phone, quickly click start in Odin.
This could keep the phone on as theoretically, a new firmware is being installed wiping the old firmware? Worth a shot?

shuko007 said:
What you could try is get 2.3.6 ready in Odin, plug the phone into your computer via USB, insert the battery and go into download mode. Then as soon as you see the download icon in the phone, quickly click start in Odin.
This could keep the phone on as theoretically, a new firmware is being installed wiping the old firmware? Worth a shot?
Click to expand...
Click to collapse
i tried but the phone shuted down after a few seconds and now the phone is bricked
here is a picture from Odin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the phone still tries to power up when i put the battery in, but now i just see the brick sign every time it tries to restart

itamarshami said:
i tried but the phone shuted down after a few seconds and now the phone is bricked
here is a picture from Odin
the phone still tries to power up when i put the battery in, but now i just see the brick sign every time it tries to restart
Click to expand...
Click to collapse
If you do the download button combo, does the download icon show before reboot? It should still...
Use these firmwares and guide: http://forum.xda-developers.com/showthread.php?t=1102881 I would probably re-partition and use the 512 pit file too.
---------- Post added 28th May 2013 at 12:04 AM ---------- Previous post was 27th May 2013 at 11:52 PM ----------
Whats weird though is how it tries to turn on when you insert the battery... Have you tried doing the button combo before (and during) putting in the battery?

shuko007 said:
If you do the download button combo, does the download icon show before reboot? It should still...
Use these firmwares and guide: http://forum.xda-developers.com/showthread.php?t=1102881 I would probably re-partition and use the 512 pit file too.
---------- Post added 28th May 2013 at 12:04 AM ---------- Previous post was 27th May 2013 at 11:52 PM ----------
Whats weird though is how it tries to turn on when you insert the battery... Have you tried doing the button combo before (and during) putting in the battery?
Click to expand...
Click to collapse
the download icon does show before the reboot, and iv`e tried both pressing the button combo before putting the battery and now i tried after, in both cases the result was the same
what is the 512 pit file? and does it matter whether i download from that thread or just download the one file from sammobile? because im not sure wich one i should download from that thread

Did you plug in after pressing both buttons?

.jRay. said:
Did you plug in after pressing both buttons?
Click to expand...
Click to collapse
i tried both, neither worked

[Q] [I9001] SGS+ bricked/broken

Hey guys,
I own a SGS+ and tried to flash a ROM a few month ago.
Not sure which one it was in particular but it was a 4.1.2 ROM.
Normally it worked pretty well but that time it broke my phone apparently.
So now a few month later I tried to get it to work again.
My phone stucks at the splashscreen, easy said.
It boots till the splash screen and then it's on for about 3-4 minutes I guess and then the screen turns off.
But apparently it still runs because if I try to start it again over the power button it doesn't work.
I have to remove the battery, insert it again and then I can use the power button.
I tried several things and I'm out of information here.
So maybe one of you guys can help me out here?
Thanks for reading!

Try wiping cache an dalvik cache and fix permissions. If that doesn't help do a full wipe and install a new rom. If it still doesn't work, flash a stock rom via odin. Also, which recovery are you using?
Sent from my GT-I9001 using xda app-developers app

Already did everything you mentioned, multiple times.
Well I used at first CWM 6.0.1.2 then switched to 6.0.2.8, then 6.0.3.2, then 6.0.3.6 and then TWRP 2.4.0.0 and TWRP 2.6.0.0.
I tried those who should be for the bricked phones.

Try to flash a new kernel, then flash a new ROM. You should be able to get into download mode...
Click to expand...
Click to collapse
..

That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.

If you can get into download mode, try flahing a stock rom via odin.
Sent from my GT-I9001 using xda app-developers app

NintendoLink07 said:
That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.
Click to expand...
Click to collapse
1.Remove your battery.
2.Reinsert battery.
3.Put in download mode.
4.Flash stock rom.
5.Profit!
Sent from my Nexus 4 using xda app-developers app

I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.

NintendoLink07 said:
I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.
Click to expand...
Click to collapse
Download BroodRom(Not ics or jb just the old GB edition) it's a lifesaver.
1.Go to recovery.
2.Format EVERYTHING(data, cache, dalvik AND system.)
3.Download mode
4.Flash broodrom with Odin.
That should work!
Sent from my Nexus 4 using xda app-developers app

Not really, still the same.
My phone still stucks in splashscreen.

Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.

Follow my tutorial about how to flash back to stock. See here: http://forum.xda-developers.com/showpost.php?p=44047896&postcount=2

NintendoLink07 said:
Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.
Click to expand...
Click to collapse
Maybe you didn't flash appropriate ROM for your device. Read this thread, especially the first post by our forum mate xsensman and try to check if it could be concerning also your device:
http://forum.xda-developers.com/showthread.php?t=1890667

Even through I know how to flash, I tried the two links from the guys above and tried them.
Again nothing happened either.
Flashing was okay, everything was fine.
Unfortunately the phone still stucks in splashscreen.
No one else knows what I could do?

verify serial No
NintendoLink07 said:
...Flashing was okay, everything was fine.Unfortunately the phone still stucks in splashscreen.
Click to expand...
Click to collapse
Mate, something is strange there. With splashscreen you mean bootloop, right? So you see the logo, but the phone doesn't really loads the Android?
OK, here we go: please remove the battery and write down your serial No and google a bit is it really i9001? There are about 20 different types of SGS so just to make sure which model do you have.
That bootloop can happen for several reasons, but I would assume that in your case it happens either for:
bootloader isn't working properly
you haven't flashed the proper ROM for your device.
I suspect very strongly the bootloader, so re-flashing the bootloader via Odin, theoretically, should revive your phone. Just check (as written above) do you REALLY have i9001, (as otherwise -if not- you could brick it with the bootloader for i9001):
First post, "5. Follow the instruction" (all files there)
http://forum.xda-developers.com/showthread.php?p=32144697

I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?

NintendoLink07 said:
....
Click to expand...
Click to collapse
Did you flash the bootloader as I've wrote you in my previous post?

NintendoLink07 said:
I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?
Click to expand...
Click to collapse
I have no idea what may that be, but are you sure your phone is bricked?
Have you tried to use normal TWRP 2.6 instead of that one for bricked phones?
I don't know, but maybe this helps:
Guide: How to Recover from a bootloop http://forum.xda-developers.com/showthread.php?t=1660596

@tetakpatak: Yes, I did it like the post "suggested".
@3L4CK_5C0RP10N: No, I'm actually not sure, that's why I wrote "bricked/broken".
I'm not the best guy at those things as you can guess.
No, I didn't tried the normal one, gonna try it now, atleast it's worth trying.
I read the post you linked me here and tried those things, unfortunately nothing happened.
Even tried it with ADB, also no solution found there.
But thanks already for the work guys!

suggest you try the following:-
1) power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and entering CWM recovery
2) In CWM recovery, enter Mounts and Storage and Format every partition, that can be formatted, repeat it twice ( You will lose all your data ) meaning you will be trying to get a clean environment for a fresh start. Do not reboot but pull out battery, press power for a few seconds and insert battery.
If you need your data, in mounts and storage, enter usb storage, here with usb connected to PC you can copy your entiere internal SDcard to PC, for salvage later.
3) get into Download mode, to flash the oldest i9000 Stock ROM 2.3.3 with AriesVe.ops using Odin 4.43 ( with ops ticked) How to flash follow this
download ROM from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

[Q] N7000 bricked?

Hello, peeps!
So I was when starting an application, my phone doesn't respond. Tried the power button and it didn't work so I removed the battery and placed it back in.
Here's when my nightmare starts. My phone is stuck at the "GT-N7000" screen, and I cannot proceed further. I'm unable to start Recovery Mode (Vol Up + Power + Home), and only Download Mode works.
However, I tried flashing stock roms, Odin showed no progress even after almost 2 hours.
What seems to be the issue? Is it a hard brick?

Questions should be in the Q&A section.
Is odin able to detect the phone.. ( the port square in odin turns yellow/blue?).
check if there are any Kies processes running in the task manager.. kill them, restart odin and restart phone in download mode and try again.

nokiamodeln91 said:
Questions should be in the Q&A section.
Is odin able to detect the phone.. ( the port square in odin turns yellow/blue?).
check if there are any Kies processes running in the task manager.. kill them, restart odin and restart phone in download mode and try again.
Click to expand...
Click to collapse
Hi, how do I move the topic?
Odin is able to detect it. Checked and no Kies processes running at all.

where is Odin getting stuck?

nokiamodeln91 said:
where is Odin getting stuck?
Click to expand...
Click to collapse
stuck at the NAND Write part, and the progress bar shows no progress at all (the green bar thing). Could this mean hard brick?

do you have warranty? If yes, take it to Samsung and tell them to rectify it. If no warranty then, you will need to get into recovery may be by flashing a kernel using odin.

nokiamodeln91 said:
do you have warranty? If yes, take it to Samsung and tell them to rectify it. If no warranty then, you will need to get into recovery may be by flashing a kernel using odin.
Click to expand...
Click to collapse
Wow...thank you for such quick replies!!
Nope, no longer in warranty..Can I have a link to the kernel file?
Thank you so much!

Before you go about this.. try a reboot PC, reboot download mode phone. try a original USB cable and main USB port of pc and flash again,
If above still stops at NAND
http://forum.xda-developers.com/showthread.php?t=1901191
look for a tar.md5 file which is odin flashable. If you remember the build number of you phone, then pick that else get any JB kernel and flash using odin. check if odin gives a pass.

nokiamodeln91 said:
Before you go about this.. try a reboot PC, reboot download mode phone. try a original USB cable and main USB port of pc and flash again,
If above still stops at NAND
http://forum.xda-developers.com/showthread.php?t=1901191
look for a tar.md5 file which is odin flashable. If you remember the build number of you phone, then pick that else get any JB kernel and flash using odin. check if odin gives a pass.
Click to expand...
Click to collapse
I've flashed it, unfortunately it's stuck at NAND (kernel flash). Are there any alternatives?
Thanks!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for double posting, here's the screenshot..

you dont need to select it everywhere... just the PDA ONLY.
1. download http://d-h.st/FVh.. this is a PIT file.. select it in the PIT partition. Check it and also repartition.
2. select the kernel file in the PDA..
3. press start... (you will need to reboot into download mode every time to start flashing. so remove the battery.. reboot into download mode.. (vol down+home+power)... after you get the screen volume up to continue.. once the screen shows DOWNLOADING, then connect to pc .. open odin

Thanks again!
How long does it normally take for the entire process to complete? The progress bar of "Set Partition" isn't moving at all

There seems to be some issue with the USB Port or Cable or PC.. you need to check ...a full flash of rom takes about 5-10 mins.

use only the back usb port, don't use the front or extension usb ports, they often throw up problems.. good luck

elprix and
I tried everything suggested, but the progress bar doesn't even move
What are the symptoms of hard brick btw?
EDIT : I tried with Odin3 V3.09, and it is stated Re-Partition failed.
EDIT2 : Tried multiple files, progress bar not moving at all.

It don't write to NAND. But it still is able to set partition. Have you tried a different pc? Uninstall Kies completely and then again install Samsung usb drivers.
Sent from my GT-I9500 using xda premium

Hi everyone!
I experience a similar problem as the original poster! Yesterday my phone was fine, but then it rebooted and got stuck. Now I can only get in to "Download mode". There it says:
Odin Mode
Product Name: GT-N7000
Custom binary download: No
Current binary: Samsung Official
I've had it running Paranoid Android successfully for months and then this happened! So where do I go from here,,,? I have Odin downloaded, drivers installed, so what should I try to flash and in what order?
I would be thankful for any help - feel a bit handicapped without a phone!

316097 said:
Hi everyone!
I experience a similar problem as the original poster! Yesterday my phone was fine, but then it rebooted and got stuck. Now I can only get in to "Download mode". There it says:
Odin Mode
Product Name: GT-N7000
Custom binary download: No
Current binary: Samsung Official
I've had it running Paranoid Android successfully for months and then this happened! So where do I go from here,,,? I have Odin downloaded, drivers installed, so what should I try to flash and in what order?
I would be thankful for any help - feel a bit handicapped without a phone!
Click to expand...
Click to collapse
Exactly what happened to me! Running on PA too! Any solutions?