Related
Hi,
I have Samsung Galaxy S I9000 with Android 2.2 (FROYO) system upgraded from 2.1 version using oden.
Yesterday I tried to update this system because I have some problem in my phone (shutdown automatically...). I used the same method I used before to UPGRADE the system (oden write SBL above the port number colored in yellow).
Unfortunately, when the phone was in "download mode", oden has stop working on 30% approx. it says that the com port is not available (knowing that this port worked correctly when oden established the connection). So I removed the battery from my phone...... (I know it is a stupid idea).
Now the phone do not start-up and when I connect it to pc nothing happens.
Pleeeeeeeeeeeeeeeeeeeeeeeease help me what must I do??
Thank you guys
Can You Boot the phone into download mode manually ?
press volume down + home + power simultaneously
ps that wasn't stupid idea - it was the only solution to turn off broken flashing, but You must try boot it again to download mode and flash again but this time make sure that every file is properly placed in odin: file with MODEM as phone, CSC to CSC and third to PDA.
Oy.
As far as I know losing power to the phone or rebooting the pc while flashing the bootloader is one of the only ways to properly brick the sgs.
This sounds bad...very bad. If the bootloader had been erased but the new one hadn't been written before you pulled the battery, then I fear it is Goodnight Charlie. No bootloader, no phone.
If you can use the three button method to get to download mode as the post above me suggested, you will be alright.
If not....maybe a jig but I would doubt it.
Sent from my GT-I9000 using XDA Premium App
Raider0001 said:
Can You Boot the phone into download mode manually ?
press volume down + home + power simultaneously
ps that wasn't stupid idea - it was the only solution to turn off broken flashing, but You must try boot it again to download mode and flash again but this time make sure that every file is properly placed in odin: file with MODEM as phone, CSC to CSC and third to PDA.
Click to expand...
Click to collapse
Thanks for your help,
Unfortunately, This button combination does not success to put the phone in download mode, even nor the "volume up + home + power on" neither "volume up + volume down + home + power on".
please, do not say there is no solution
I trust and believe in you guys
rschenck said:
Oy.
As far as I know losing power to the phone or rebooting the pc while flashing the bootloader is one of the only ways to properly brick the sgs.
This sounds bad...very bad. If the bootloader had been erased but the new one hadn't been written before you pulled the battery, then I fear it is Goodnight Charlie. No bootloader, no phone.
If you can use the three button method to get to download mode as the post above me suggested, you will be alright.
If not....maybe a jig but I would doubt it.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Hi,
The button combination do not work
what did you mean by "jig". I am sure there is a solution
You seem expert so you can find a creative solution
try this: http://forum.xda-developers.com/showthread.php?t=819551 or give it to nearest samsung service, just say it is broken doesn't start - do never ever say its broken because i flashed it
Long time ago i have bricked motorola, said its broken and wont start - what they did was main-board replacing of course free by warranty
Raider0001 said:
try this: http://forum.xda-developers.com/showthread.php?t=819551 or give it to nearest samsung service, just say it is broken doesn't start - do never ever say its broken because i flashed it
Long time ago i have bricked motorola, said its broken and wont start - what they did was main-board replacing of course free by warranty
Click to expand...
Click to collapse
I purchase this phone locked for orange in France and I unlocked it to use it outside France. Can this cause a problem?
Best regards
I agree that a service center is your.only option now.
Sent from my GT-I9000 using XDA Premium App
i would strongly suggest you first try building the jig with resistors
if that doesn't get you into download mode, then you can take the phone to your provider.
good luck mate
RorixRebel said:
i would strongly suggest you first try building the jig with resistors
if that doesn't get you into download mode, then you can take the phone to your provider.
good luck mate
Click to expand...
Click to collapse
How can I do this, I know that if the Samsung logo does not appear (like my case), then this method will not work. What do you think?
are you able to see the following image on your phone when you start it up?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if you see this then it can be saved, if its just a black screen you are kind of screwed
Does the phone show any reaction? Does the acreen show anything? Any Sound? If it's just a black stone and doesnt react at all, send it to Samsung and as reason for the phone to be bricked, just say Kies f***ed it up while you tried to sync contacts or so. I did that one week ago and as you can see it's working again.
Well if it shows reaction try building your own jig as mentioned in the thread above or buy one from ebay to boot your phone into download mode.
Sent from my GT-I9000 using XDA App
RorixRebel said:
are you able to see the following image on your phone when you start it up?
if you see this then it can be saved, if its just a black screen you are kind of screwed
Click to expand...
Click to collapse
Phone make no action!!! like if there is no battery in the phone. only black screen
Th30n34nd0nl7 said:
Does the phone show any reaction? Does the acreen show anything? Any Sound? If it's just a black stone and doesnt react at all, send it to Samsung and as reason for the phone to be bricked, just say Kies f***ed it up while you tried to sync contacts or so. I did that one week ago and as you can see it's working again.
Well if it shows reaction try building your own jig as mentioned in the thread above or buy one from ebay to boot your phone into download mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
ONLY black screen. The phone is out of warranty, will this cost a lot? they will fix it by hardware (change a part) or by software?
Try this:
1. Take everything out of the phone (sim, micro sd, battery)
2. Press volume up+home+power
3. Put the battery back in while still having the three buttons pressed.
4. Hopefully you are in download mode.
hwehbe said:
ONLY black screen. The phone is out of warranty, will this cost a lot? they will fix it by hardware (change a part) or by software?
Click to expand...
Click to collapse
you can buy the jig from ebay. search for it.
if its gets the phone into download mode, u know what to do then...else take it to some unofficial service centre..i mean ordinary cell phone repairing shop and see if they can fix it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
100% works for all Gingerbread, ICS and JellyBean ROMs TouchWiz Stock/Custom and AOSP/AOKP.
Works with new ICS and JB (4.0.3, 4.0.4, 4.1.1 and 4.1.2) ROMs
Italian translate by Willy89
1) You need a JIG. You can buy it or create its own
2) Download attached zip archive and extract it to some folder
3) Reboot you device in download mode - turn it off, than hold volume down + center button + power button. Wait for the warning message and press volume up
4) Plug it to you PC
5) Start Odin from extracted folder and choose '1.tar' file for PDA flash. You must get the same settings:
6) Press Start and wait for the completion of the flashing
7) After reboot you should get black and dead screen. Unplug USB from PC. Long press power button (15-20 seconds). Remove battery for 5 seconds, plug in JIG, put battery back. Wait for 40 seconds, press power button for 5 seconds, remove JIG, long press power button (15-20 seconds), remove battery
8) Put battery back, hold volume down + center button + power button for 10-15 seconds, press volume up, plug it to you PC
9)
If you have GingerBread ROM TW stock/custom (Android 2.3.X) or any ICS and JB AOSP/AOKP (MIUI, Cyanogen, Paranoid and others) your step is:
Start Odin from extracted folder and choose '2.tar' file for PDA flash
Click to expand...
Click to collapse
If you have TW stock/custom ICS/JB ROM (Android 4.0.3, 4.0.4, 4.1.1, 4.1.2) your step is:
Start Odin from extracted folder and choose '2-ZSLPF.tar' file for BOOTLOADER flash
Click to expand...
Click to collapse
10) Press Start and wait for the completion of the flashing
At points 7-10 the screen will not work!
After these steps you will get:
- No yellow triangle
- Custom binary download value will set to 'NO'
- Current binary value will set to 'SAMSUNG OFFICIAL'
FAQ
Will it work for new stock gingerbread, ics, custom, cyanogen, miui and other firmware?
All gingerbread ROMs and ICS except CLP5 and CLP6 (some users report about incompatibility). Better don't use this reset counter instruction if you have those ICS ROMs.
Do I need root for this?
No.
Does not work, yellow triangle is not disappeared!
Carefully follow all 10 points of instruction.
I am having trouble, black screen after a 10th point!
Try reboot your device. Remove battery for 10 seconds and plug it back.
Odin can't recognize USB plug at 4 or 8 point. + Windows can't detect device or identifies as "Unknown device".
Try another USB port. Try reinstall kies or remove it and install only galaxy note drivers (link1, link2). If not helped try another PC.
Will this work on the Galaxy S2 or Galaxy Nexus?
No! You will break your phone. Works and tested for GT-N7000 and GT-I9220.
Will this work on the SGH-I717 (AT&T)?
Not tested yet.
Will I have a problem with a warranty? Can they identify the use of this counter reset?
There is absolutely no chance to detect this binary reset at service center.
Does it clear counter as well ?
ludwiglaisne said:
Does it clear counter as well ?
Click to expand...
Click to collapse
Yes, mine at zero with custom firmware.
hi,
why in the zip there 2 files ?
1.tar
2.tar
tks for reply mate
does that mean we can keep our gnote in warranty?
jonata said:
hi,
why in the zip there 2 files ?
1.tar
2.tar
tks for reply mate
Click to expand...
Click to collapse
Please read my instruction in first post carefully
Delux9364 said:
does that mean we can keep our gnote in warranty?
Click to expand...
Click to collapse
Yes!
Why is it so troublesome? I thought it is exactly same as Galaxy S2...just plug in the usb jig when the phone is off, then it will boot to download mode, and reset the binary counter + remove triangle....
ck_looi said:
Why is it so troublesome? I thought it is exactly same as Galaxy S2...just plug in the usb jig when the phone is off, then it will boot to download mode, and reset the binary counter + remove triangle....
Click to expand...
Click to collapse
Probabily you have a old bootloader in your gs2, because with new bootloader appened same problem like GNote
Inviato dal mio GT-N7000 usando Tapatalk
alesscam said:
Probabily you have a old bootloader in your gs2, because with new bootloader appened same problem like GNote
Inviato dal mio GT-N7000 usando Tapatalk
Click to expand...
Click to collapse
Yes, this why we have to flash first the old sgs2 bootloader as discussed many times in other threads
The yellow triangle has gone...
On flashing 2.tar, Odin stop on "RQT_CLOSE !!"
What can I do ?
---------- Post added at 03:26 PM ---------- Previous post was at 03:21 PM ----------
I unplug usb, It indicate "FAIL" of course...
Then I tried to recovery (without jig), it works !!!
Everything's fine, but I spend some hard time for a moment !
Thx!
Works got, thx 4 your work and introduction
geek78 said:
Yes, this why we have to flash first the old sgs2 bootloader as discussed many times in other threads
Click to expand...
Click to collapse
If you are brave try it. I dont like to brick my note
Sent from my GT-N7000 using Tapatalk
curl66 said:
If you are brave try it. I dont like to brick my note
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Do you know what you have in the 1.tar file ?
anonymous572,
yet we knew from the first day of sales
http://forum.xda-developers.com/showthread.php?t=1328671
To remove the triangle, just flash the stock kernel..
anyway, thanks for the courage to post Instruction
1. After doing this procedure, do we lose root and CWM? If so, How do we get them back? zergrush?
2. I have a jig that works with my SGS, but it doesn't "appear" to work with my Note. Is there any way to tell if it actually works before I start flashing foreign bootloaders?
TIA!
RashaMatt said:
1. After doing this procedure, do we lose root and CWM? If so, How do we get them back? zergrush?
2. I have a jig that works with my SGS, but it doesn't "appear" to work with my Note. Is there any way to tell if it actually works before I start flashing foreign bootloaders?
TIA!
Click to expand...
Click to collapse
1. No.
2. If it works with SGS it must works with Note.
kortin said:
The yellow triangle has gone...
Click to expand...
Click to collapse
Yes,Thank you very much
Hey Guys!
Even if this is the old bootloader from [email protected] anonymous572, thX for your work.
for the German-speaking people:
howto remove yellow triangle and flashcounter reset
http://www.pocketpc.ch/galaxy-note-...tfernen-flashcounter-reseten.html#post1250472
with words and pic's.
Greetings
Chris
Very strange... I followed all instructions exactly, both flashes completed successfully (Odin says SUCCESS), and everything went according to plan...
EXCEPT... the yellow triangle is still there at the end!
Hey guys,
I own a SGS+ and tried to flash a ROM a few month ago.
Not sure which one it was in particular but it was a 4.1.2 ROM.
Normally it worked pretty well but that time it broke my phone apparently.
So now a few month later I tried to get it to work again.
My phone stucks at the splashscreen, easy said.
It boots till the splash screen and then it's on for about 3-4 minutes I guess and then the screen turns off.
But apparently it still runs because if I try to start it again over the power button it doesn't work.
I have to remove the battery, insert it again and then I can use the power button.
I tried several things and I'm out of information here.
So maybe one of you guys can help me out here?
Thanks for reading!
Try wiping cache an dalvik cache and fix permissions. If that doesn't help do a full wipe and install a new rom. If it still doesn't work, flash a stock rom via odin. Also, which recovery are you using?
Sent from my GT-I9001 using xda app-developers app
Already did everything you mentioned, multiple times.
Well I used at first CWM 6.0.1.2 then switched to 6.0.2.8, then 6.0.3.2, then 6.0.3.6 and then TWRP 2.4.0.0 and TWRP 2.6.0.0.
I tried those who should be for the bricked phones.
Try to flash a new kernel, then flash a new ROM. You should be able to get into download mode...
Click to expand...
Click to collapse
..
That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.
If you can get into download mode, try flahing a stock rom via odin.
Sent from my GT-I9001 using xda app-developers app
NintendoLink07 said:
That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.
Click to expand...
Click to collapse
1.Remove your battery.
2.Reinsert battery.
3.Put in download mode.
4.Flash stock rom.
5.Profit!
Sent from my Nexus 4 using xda app-developers app
I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.
NintendoLink07 said:
I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.
Click to expand...
Click to collapse
Download BroodRom(Not ics or jb just the old GB edition) it's a lifesaver.
1.Go to recovery.
2.Format EVERYTHING(data, cache, dalvik AND system.)
3.Download mode
4.Flash broodrom with Odin.
That should work!
Sent from my Nexus 4 using xda app-developers app
Not really, still the same.
My phone still stucks in splashscreen.
Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.
Follow my tutorial about how to flash back to stock. See here: http://forum.xda-developers.com/showpost.php?p=44047896&postcount=2
NintendoLink07 said:
Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.
Click to expand...
Click to collapse
Maybe you didn't flash appropriate ROM for your device. Read this thread, especially the first post by our forum mate xsensman and try to check if it could be concerning also your device:
http://forum.xda-developers.com/showthread.php?t=1890667
Even through I know how to flash, I tried the two links from the guys above and tried them.
Again nothing happened either.
Flashing was okay, everything was fine.
Unfortunately the phone still stucks in splashscreen.
No one else knows what I could do?
verify serial No
NintendoLink07 said:
...Flashing was okay, everything was fine.Unfortunately the phone still stucks in splashscreen.
Click to expand...
Click to collapse
Mate, something is strange there. With splashscreen you mean bootloop, right? So you see the logo, but the phone doesn't really loads the Android?
OK, here we go: please remove the battery and write down your serial No and google a bit is it really i9001? There are about 20 different types of SGS so just to make sure which model do you have.
That bootloop can happen for several reasons, but I would assume that in your case it happens either for:
bootloader isn't working properly
you haven't flashed the proper ROM for your device.
I suspect very strongly the bootloader, so re-flashing the bootloader via Odin, theoretically, should revive your phone. Just check (as written above) do you REALLY have i9001, (as otherwise -if not- you could brick it with the bootloader for i9001):
First post, "5. Follow the instruction" (all files there)
http://forum.xda-developers.com/showthread.php?p=32144697
I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?
NintendoLink07 said:
....
Click to expand...
Click to collapse
Did you flash the bootloader as I've wrote you in my previous post?
NintendoLink07 said:
I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?
Click to expand...
Click to collapse
I have no idea what may that be, but are you sure your phone is bricked?
Have you tried to use normal TWRP 2.6 instead of that one for bricked phones?
I don't know, but maybe this helps:
Guide: How to Recover from a bootloop http://forum.xda-developers.com/showthread.php?t=1660596
@tetakpatak: Yes, I did it like the post "suggested".
@3L4CK_5C0RP10N: No, I'm actually not sure, that's why I wrote "bricked/broken".
I'm not the best guy at those things as you can guess.
No, I didn't tried the normal one, gonna try it now, atleast it's worth trying.
I read the post you linked me here and tried those things, unfortunately nothing happened.
Even tried it with ADB, also no solution found there.
But thanks already for the work guys!
suggest you try the following:-
1) power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and entering CWM recovery
2) In CWM recovery, enter Mounts and Storage and Format every partition, that can be formatted, repeat it twice ( You will lose all your data ) meaning you will be trying to get a clean environment for a fresh start. Do not reboot but pull out battery, press power for a few seconds and insert battery.
If you need your data, in mounts and storage, enter usb storage, here with usb connected to PC you can copy your entiere internal SDcard to PC, for salvage later.
3) get into Download mode, to flash the oldest i9000 Stock ROM 2.3.3 with AriesVe.ops using Odin 4.43 ( with ops ticked) How to flash follow this
download ROM from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Problem installing kernel-Cappy CyanCore help!
I had decided to install the Rom Kernel 4.2.2-Cappy CyanCore for 4.2
and when I hit reboot into recovery mode just stayed on the white screen logo At & t does not happen there, but the most angry is that my USB port is damaged and I can not do ODIN. any help? solves my phone and I love the 4.2 ROm please help. I'm From Puerto Rico. :crying:
josue276 said:
Problem installing kernel-Cappy CyanCore help!
I had decided to install the Rom Kernel 4.2.2-Cappy CyanCore for 4.2
and when I hit reboot into recovery mode just stayed on the white screen logo At & t does not happen there, but the most angry is that my USB port is damaged and I can not do ODIN. any help? solves my phone and I love the 4.2 ROm please help. I'm From Puerto Rico. :crying:
Click to expand...
Click to collapse
Try to manually get in recovery, it might take a few tries.
As for your usb port problem.. It might be worth getting it replaced/fixed as the cappy highly depends on it.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Try to manually get in recovery, it might take a few tries.
As for your usb port problem.. It might be worth getting it replaced/fixed as the cappy highly depends on it.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
send my phone to fix the usb port, soon I will give detail if I enter download mode and ODIN and install Semamphore do for 4.2 that was what I had worked. and hopefully get lucky. Thank you.: Bueno:
Arrange the usb port and I see the error still continues, I notice that not only is reading load when I put the charger, heeeelp me! spend $ 30 dollars to fix usb port or even worked and pc does not detect the phone when I connect it does not let me enter download mode. send the images to see the problem. I hope you can help me. this despair!.
Charging Battery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'll have to do a JIG or JTAG?
josue276 said:
Arrange the usb port and I see the error still continues, I notice that not only is reading load when I put the charger, heeeelp me! spend $ 30 dollars to fix usb port or even worked and pc does not detect the phone when I connect it does not let me enter download mode. send the images to see the problem. I hope you can help me. this despair!.
Charging Battery
View attachment 2314627 View attachment 2314628
I'll have to do a JIG or JTAG?
Click to expand...
Click to collapse
I don't think you're doing this right. Getting in download mode, you have to be unplugged, phone turned off and hold vol down + power.
BWolf56 said:
I don't think you're doing this right. Getting in download mode, you have to be unplugged, phone turned off and hold vol down + power.
Click to expand...
Click to collapse
Yes, I already recovery mode but does not work, is that he is as frizzy, send for the USB JIG for amazon to see if that works. I hope if works if not then I will comment to follow their opinions.
Unfortunately did not work with USB JIG!. I think it needs a JTAG!. and I q Pay not worth 40 dollars for a JTAG! if you find another way to enter download mode will thank you many times!. the phone turns itself I think that's what it does not enter download mode with JIG USB. Powering the button is damaged.
What ROM you were running before flashing CyanCore kernel?
How did you find USB is not working? Are you using the original Samsung USB cable?
Val D. said:
What ROM you were running before flashing CyanCore kernel?
How did you find USB is not working? Are you using the original Samsung USB cable?
Click to expand...
Click to collapse
The rom you were using is [4.2.2] GamerzROM Legend Edition v4.0
and yes use the Samsung USB Cable.
the power button when I bought apparently not working but I did not need as the phone turns putting the battery.
now I do not know if this hurting to use USB JIG.
the phone is as frizzy as when I install the cable before putting the battery and put the battery and stays like in the picture I put up
Install only when CyanCore kernel. and gave him a Reboot Recovery, so stayed on the screen in White logo AT & T, I just wanted to install the version 4.3
either I get into recovery mode with Volume Up + Down before if I did.
Well, with so many hardware issues playing with custom ROMs is not a good idea in a first place. Anything that goes wrong kills your phone with no way to recover it.
Val D. said:
Well, with so many hardware issues playing with custom ROMs is not a good idea in a first place. Anything that goes wrong kills your phone with no way to recover it.
Click to expand...
Click to collapse
Well the phone turned on. I think it will be fixed.
Hello Everybody !!
I really need help
I just got my T815 (Austria),and I tried to root it.
I read through all the tutorials for this,also Im not new to this,yet it seems I screwed up somewhere.
Here is what I did (to my tab) :
* Downloaded Odin 3.10.xx
* Downloaded sm-t815_cf_autoroot.tar
* Firmware on the tab was 5.0.2 (also did a OTA update before rooting)
* Flashed the sm-t815_cf_autoroot.tar with odin
Rebooted,everything was okay,there was also superuser installed already
* flashed twrp_2.8.6.3_LL_5.0.2_t815.tar
* rebooted into recovery,looked really great (compared to my old CWM on my old tab)
* then I did a full wipe,so I can start over now with the rooted tab.
yet when I rebooted,I just see the white on black (Galaxy Tab S2...) and thats it.
I cant even turn the thing off .
I can get into download mode.
Tried to flash T815XXU1AOI5_T815OXA1AOI5_T815XXU1AOI5_HOME.tar.md5 yet it says
SW REV. CHECK FAIL DEVICE : 2 , BINARY : 1
All I can do now with the device is :
* Boot into DownloadMode
* When I flash twrp_2.8.6.3_LL_5.0.2_t815,I can also access the twrp recovery
but thats all
When I reboot I only see the white on black ,thats all,I cant even turn it off
any ideas ???
help is HIGHLY appreciated !!!
well... I was quite sure Im F*****D even after 3h googeling and flashing stuff... yet it seems it wasnt enough time spend on research.
I managed to bring my tab back from the dead... I found a firmware that was flashable,and now its like nothing ever has happend.
Rooted/Recovery.. everything is okay.
So pleae consider this thread closed,I dont know how to delete it myself.
pS:
What I hate most are posts where ppl ask stuff,then close it themself and say..."nevermind.. I fixed it" without posting the solution.. so I wont do that too
My solution was :
Flashing : T815XXU2AOJ4_T815ATO2AOJ1_T815XXU2AOJ4_HOME.tar.md5
It seems this is newer (version) than the ones I tried to flash,so it was accepted by the device.
I fall in the same condition, i flash the same firmware and odin say it is all ok and the firmware it is charged correctly but i'm in bootloop again.
any idea? no way to go in recovery mode, only download mode
ctlx
ctlx said:
I fall in the same condition, i flash the same firmware and odin say it is all ok and the firmware it is charged correctly but i'm in bootloop again.
any idea? no way to go in recovery mode, only download mode
Click to expand...
Click to collapse
Reboot your device into Android Recovery Mode: For smartphones >> by pressing and holding Volume Up and Home buttons together and then hold the Power key till screen shows the Samsung logo. Release the power button but keep the other two keys pressed until you see a black screen with green Android bot and blue text. For Galaxy Tab or Note 10.1 >> press and hold the Volume Down + Power keys together for a few seconds until you see the yellow triangle with Android bot followed by a black screen with blue text.
Once in recovery mode, use the Volume Up/Down keys to scroll up or down, and use the Power button to select any option.
Perform the wipe operations by scrolling down to wipe data/factory reset option and select yes to confirm the process. Next, go to wipe cache partition and confirm it.
Once done, go to the reboot system.Then you flash via odin any frimware for your model.
Thanks but the problem is to go to recovery mode. I can't shut down the tablet. The only think i can do is to go in download mode pushing power+down+home button. No others combinations is accepted. I try to discharge the tablet and then insert the cable pushing the correct combination for recovery mode but it don't work.
ctlx said:
Thanks but the problem is to go to recovery mode. I can't shut down the tablet. The only think i can do is to go in download mode pushing power+down+home button. No others combinations is accepted. I try to discharge the tablet and then insert the cable pushing the correct combination for recovery mode but it don't work.
Click to expand...
Click to collapse
Its different on a newer Galaxy Tab.
My Note 8.0 i.e. goes "Power button + Volume Up" into recovery.
But on the Tab S2 ,you have to press "home+power+volume down",and the second the screen goes black,you have to press volume up,then recovery is loading (red text in the upper left => then release all buttons). Otherwise the download mode loads again.
Took me a while to figure this out.
If your using TWRP,you can power down your device there if your still caught in a bootloop (i.e. you cant flash the firmware because of a version mismatch,like it was in my case)
It was kinda scary when my tab all of a sudden didnt accept the firmware I was able to flash before.
But I guess the OTA update changed the version,so I had to find a firmware that matches that.
Im quite sure yours isnt hard brick as well,just be patient,there is almost always a way to fix it !!
Just curious. I own a sm-t710. WiFi model but have similar issue. I keep getting error in Odin under boot. Is that the error you were getting?
Not the same error. Odin tell me it is all OK but I can't came out from the bootloop. I can reach only the black and white screen or download mode, not in recovery.
have you tried to flash twrp and tried again to get into recovery ??
justin22 said:
have you tried to flash twrp and tried again to get into recovery ??
Click to expand...
Click to collapse
I have twrp working but just can't flash with odin. Maybe I will try other firmwares to see if that works. I will also try to copy them to sd card and flash with twrp. At work now so will try tonight.
neoflasher said:
Just curious. I own a sm-t710. WiFi model but have similar issue. I keep getting error in Odin under boot. Is that the error you were getting?
Click to expand...
Click to collapse
It's a bit pointless stating you get an error in Odin without actually providing any screenshots or information as to what the error is.
justin22 said:
have you tried to flash twrp and tried again to get into recovery ??
Click to expand...
Click to collapse
yes i try but don't work. odin say it is all ok with the recovery but i continue to be stucked in logo screen.
i think one way it is to force recovery mode from odin but i don't know how.
maybe somone have any idea about it?
ashyx said:
It's a bit pointless stating you get an error in Odin without actually providing any screenshots or information as to what the error is.
Click to expand...
Click to collapse
I will try and recreat the situation so I can send the screenshots as soon as I get home. I'm currently at work.
Sent from my SM-G928T using Tapatalk
ashyx said:
It's a bit pointless stating you get an error in Odin without actually providing any screenshots or information as to what the error is.
Click to expand...
Click to collapse
hopefully you guys can help me with this.
Sent from my SM-G928T using Tapatalk
[/IMG]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
neoflasher said:
hopefully you guys can help me with this.
Sent from my SM-G928T using Tapatalk
[/IMG]
Click to expand...
Click to collapse
The firmware is being rejected because it is not compatible with your device. Download the exact firmware for your device region.
Firmware is correct for my device and region. Thank you for the response though
Sent from my SM-G928T using Tapatalk
neoflasher said:
Firmware is correct for my device and region. Thank you for the response though
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Odin only rejects images if the signature is wrong or it is corrupted.
Seeing as it passed the md5 check it must be the wrong firmware for your device. I suggest you flash the OJ4 firmware.
If it isn't then you have big problems as the only other explanation is a broken emmc.
Which country did you buy this tablet?
As far as firmware seems correct. Got it from Sam's mobile. Hope the broken emmc is not the case. If it is can that be fixed? Damn. Tablet will be a week old tomorrow
Sent from my SM-G928T using Tapatalk
---------- Post added at 08:33 AM ---------- Previous post was at 08:32 AM ----------
It could be wrong region since I installed roms labeled unknown since on Sam's mobile didn't see one for USA
Sent from my SM-G928T using Tapatalk
neoflasher said:
As far as firmware seems correct. Got it from Sam's mobile. Hope the broken emmc is not the case. If it is can that be fixed? Damn. Tablet will be a week old tomorrow
Sent from my SM-G928T using Tapatalk
---------- Post added at 08:33 AM ---------- Previous post was at 08:32 AM ----------
It could be wrong region since I installed roms labeled unknown since on Sam's mobile didn't see one for USA
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Please answer the question. Which country did you buy this device?
If it's USA then you need XAR (CELLULAR SOUTH)
Damn. I think I was using unknown. I'm at work now but hopefully ur right.
Sent from my SM-G928T using Tapatalk
---------- Post added at 11:34 AM ---------- Previous post was at 10:38 AM ----------
ashyx said:
Please answer the question. Which country did you buy this device?
If it's USA then you need XAR (CELLULAR SOUTH)
Click to expand...
Click to collapse
Sorry. Just read full post. Bought it in NJ. USA
Sent from my SM-G928T using Tapatalk
---------- Post added at 12:05 PM ---------- Previous post was at 11:34 AM ----------
I dropped it off at local repair shop which deals with iPhones and android. I just called them and they said they couldn't do anything. Do I have any options besides using it as a paper weight. Anyone that deals with these repairs?,, I will try to flash XAR file when I get home but with work can't spend too much time on it. I'm running Windows on a mac mini and that is where I have Odin installed. Do you think that may be an issue?
Sent from my SM-G928T using Tapatalk