I just Supercharged my phone changing the minfrees (still don't understand what they are) to the aggressive setting, but forgot to do the "run on boot" module. When I restarted my phone, it goes into a loop where it goes to the home, the displays "The process android.process.acore has stopped unexpectedly. Please try again" over and over, each time restarting the home app.
I can't do anything on the phone, and didn't backup right before this. My md5 on my last thriller doesn't seem to match, so I can't just restore that backup, and would prefer not to reflash thriller stock and use old titanium backups or anything.
Any ideas how to solve this?
Thanks a ton
Do a reset in recovery should put it back to norm or reflash ur rom ur on
Sent from my LG-P925 using xda premium
Related
Ok so I installed both cyanogen and google apps roms and everything. my phone booted up with the cyanogen logo and everything. but, it won't go past the google setup. i keep getting the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please Try Again" message. I've forced closed it bout 20 times already and it won't go past that message. any ideas how i can fix this? thanks!
p.s.
i did do a nandroid backup so if i need to go back to that what would i do next?
iamdavid said:
Ok so I installed both cyanogen and google apps roms and everything. my phone booted up with the cyanogen logo and everything. but, it won't go past the google setup. i keep getting the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please Try Again" message. I've forced closed it bout 20 times already and it won't go past that message. any ideas how i can fix this? thanks!
p.s.
i did do a nandroid backup so if i need to go back to that what would i do next?
Click to expand...
Click to collapse
Kick back to your nand, delete the rom and gapps, redownload them and reflash. It's possible that you just got a bad dl of one or the other. Make sure you wipe data and dalvik. I had this issue once, banged my head on the wall and just decided to get rid of it all and try again.
Yes same for me the whole time it was a bad download good luck
Root-Hack-Mod-Always™
this happened to me - I can get into the phone but nothing works - just blank screen with that error coming up frist - tried erasing everything, wipe dalvik cache, user cache, factory reset, etc. - then tried reflashing rom via CWM - still nothing works - my home and back buttons are also gone
Funkadelick said:
this happened to me - I can get into the phone but nothing works - just blank screen with that error coming up frist - tried erasing everything, wipe dalvik cache, user cache, factory reset, etc. - then tried reflashing rom via CWM - still nothing works - my home and back buttons are also gone
Click to expand...
Click to collapse
Do you have any nandriod backups? If so, run the backup and see what happens.
process com.huawei.setup_tmo
user7618 said:
Kick back to your nand, delete the rom and gapps, redownload them and reflash. It's possible that you just got a bad dl of one or the other. Make sure you wipe data and dalvik. I had this issue once, banged my head on the wall and just decided to get rid of it all and try again.
Click to expand...
Click to collapse
i stuck with the same issue on my mytouch q but i dont have a nanoid, need help,
dont wanna buy a new phone
Hi everyone,
I'm in desperate need of help and advice! Starting yesterday evening, my phone kept force closing processes and apps (even Google ones) constantly and rapidly. It was to the point where after I hit 'force close' in the pop-up window another would pop-up etc. I restarted a couple times, cleared the dalvik cache , repaired permissions, etc. I have downloaded no new apps for a week, regular titanium backups but when I tried to restore settings with Titanium it kept force closing too (hence, unsuccessful).
Here's my problem - my phone won't even get past the startup screen! It's stck on the Rogers 'i896' screen and won't go past. It will not start up in recovery either. I've managed to get it to open in download mode, but when I plug my phone into my computer it will not recognize it. I've used Odin3 to try and reflash to stock, but I keep getting the message "all threads completed (succeed 0/failed 0)". I've tried this with the one click odin and the regular Odin. No luck.
Can anyone help me at all? I'm thinking if I can figure out a way to erase everything in download mode it might startup but I haven't figured out a way to do that; Odin's master clear doesn't seem to be doing it nor the 'repartition option'. Can someone PLEASE PLEASE PLEASE help me?
I was previously running CM7 with Glitch Kernel, 2.3.3
Thank you for any help you can provide!
Try using Linux. Wubi installer. Then KB2 from Adam outler
NewbDroid said:
Hi everyone,
I'm in desperate need of help and advice! Starting yesterday evening, my phone kept force closing processes and apps (even Google ones) constantly and rapidly. It was to the point where after I hit 'force close' in the pop-up window another would pop-up etc. I restarted a couple times, cleared the dalvik cache , repaired permissions, etc. I have downloaded no new apps for a week, regular titanium backups but when I tried to restore settings with Titanium it kept force closing too (hence, unsuccessful).
Here's my problem - my phone won't even get past the startup screen! It's stck on the Rogers 'i896' screen and won't go past. It will not start up in recovery either. I've managed to get it to open in download mode, but when I plug my phone into my computer it will not recognize it. I've used Odin3 to try and reflash to stock, but I keep getting the message "all threads completed (succeed 0/failed 0)". I've tried this with the one click odin and the regular Odin. No luck.
Can anyone help me at all? I'm thinking if I can figure out a way to erase everything in download mode it might startup but I haven't figured out a way to do that; Odin's master clear doesn't seem to be doing it nor the 'repartition option'. Can someone PLEASE PLEASE PLEASE help me?
I was previously running CM7 with Glitch Kernel, 2.3.3
Thank you for any help you can provide!
Click to expand...
Click to collapse
Do you have the captivate drivers installed on your computer? odin needs the captivate drivers, not the nexus s drivers like cm7.
When I tun something, about 20 seconds in, it shows me the process ......... has stopped working. Everything was working fine
Also, when I boot up my phone, it doesn't go past the ICS boot logo. I have to turn the phone off and then turn it on again. When it finally boots up, I get loads of messages like 'Hotmail has stopped working' and Android keyboard has stopped working. This is REALLY annoying! Bit from what I've seen, after I run the app, it crashes, and then it works normally again. Can someone PLEASE help? I updated to ICS333 2.0.1 yesterday from 2.0. I'm running semaphore and sometimes devil. I switched to semaphore because I flashed the ROM again. Nothing changed. Please help!
I think it is ROM problem you may go back to 2.0 or change it to another ICS
Try reflashing the rom and keep it stock, make sure you clear cache and dalvik. You also want to fix permissions.
Otherwise try slimrom.
If you don't want to do all this, just try fixing permissions through cwm.
Sent from my GT-I9000 using Tapatalk 2
domdomrys said:
When I tun something, about 20 seconds in, it shows me the process ......... has stopped working. Everything was working fine
Also, when I boot up my phone, it doesn't go past the ICS boot logo. I have to turn the phone off and then turn it on again. When it finally boots up, I get loads of messages like 'Hotmail has stopped working' and Android keyboard has stopped working. This is REALLY annoying! Bit from what I've seen, after I run the app, it crashes, and then it works normally again. Can someone PLEASE help? I updated to ICS333 2.0.1 yesterday from 2.0. I'm running semaphore and sometimes devil. I switched to semaphore because I flashed the ROM again. Nothing changed. Please help!
Click to expand...
Click to collapse
Go into recovery and hit wipe data. Then reboot, everything should work and you can reinstall your apps.
Sent from my SGH-I897 using XDA
Hello...so..now i don't really know what to do. I had Django rom, 1.7.1 and a few days ago, it got glitchy, apps stopped to respond. So i wanted another rom, and..by a noob mistake i did it with rom manager, downloaded directly Eagle's blood ICS. it started and all that. but i didn't stopped there...when i got home i wanted back that Django ROM...i wiped everything and installed it..but when i rebooted the phone, it started with Eagles Blood loader and..when it starts..it gives me this"Encrytion unsuccessful. Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using yoour phone, you must perform a factory reset. When you set up your phone after the reset, you'll have an oportunity to restore any data that was backed up to your Google Account." And gives me an "Reset phone" button. i pressed it and it gets me back to the same message after it loads up. What to do?
Mitzu' said:
Hello...so..now i don't really know what to do. I had Django rom, 1.7.1 and a few days ago, it got glitchy, apps stopped to respond. So i wanted another rom, and..by a noob mistake i did it with rom manager, downloaded directly Eagle's blood ICS. it started and all that. but i didn't stopped there...when i got home i wanted back that Django ROM...i wiped everything and installed it..but when i rebooted the phone, it started with Eagles Blood loader and..when it starts..it gives me this"Encrytion unsuccessful. Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using yoour phone, you must perform a factory reset. When you set up your phone after the reset, you'll have an oportunity to restore any data that was backed up to your Google Account." And gives me an "Reset phone" button. i pressed it and it gets me back to the same message after it loads up. What to do?
Click to expand...
Click to collapse
try to nvflash an ICS clean ROM or GB ROM.....
check for Stefan's Homero's or Topo's clean nvflash ROM....everything will be fixed for you mate
dont worry....but backup your data....or just install clean from store....thats it
Hope it helps
I have ViperOne 4.2 rom installed with latest fw, radio and Elemental X kernel 10.10.1. I have this setup now for about 2 weeks or so and have not changed anything on my phone drastically or have installed any new software etc.
Today all of a sudden my phone rebooted and once it did i am greeted with the message that Unfortunately, the process com.android.systemui has stopped. When i click ok the UI seems to reboot itself quickly but then i get the same error message again and again after repeating these steps.
I have restarted my phone several times, even booted into safe mode only yet the same error keeps comming up again and again.
Can anybody advise what the problem could be or what to do to make it stop?
Worst case scenario i can restore from a Nandroid backup but i would prefer not atm as i'd rather know what is causing this problem.
Any help would be appriciated!
Great. I tried to delete the cache in recovery just as a try. When i rebooted i was greeted by stockish type of welcome screen with setup your phone info. So i went back to recovery to try restore the nandroid backup which is on my phone. After some time TWRP sais "Restore failed".... never had that before either.... wonderfull...
So this day just keeps getting weirder and weirder. While trying to somehow restore my nandroid (which still does not work btw) when i go to power off my phone via TWRP it sais no SU is installed and it seems i do not have root permissions.
Which is very odd because i am S-OFF, SuperCID for quite some time now....
What the hell is going on today? Meh...
I had the FC in com.android.systemui too, but so far i did`t have the issue with restoring. Would be also thankful for further advise...
Anybody an Idea?
bonzai80 said:
I had the FC in com.android.systemui too, but so far i did`t have the issue with restoring. Would be also thankful for further advise...
Anybody an Idea?
Click to expand...
Click to collapse
if you're using a custom rom try a 'dirty' flash (flash without wiping). That fixes most of these types of FCs without losing any data.
I am using the Viper 4.3 ROM, was choosing to NOT install some of the Apps that would be included on a regular install - maybe this causes the FC. I try without removing these applications. Thanks for your advise! :good: