Hi guys... I've been having a couple of problems whith my Captivate...
1.- Power button doesn't work.... Is there a solucion to wake the phone up whith a volume key?? Or any alternative..(?)
2.- When the phone is turned off, it shows the battery status, but it's not conected to the charger and nothing... I just put the battery on the and it shows as if it were charging... And I cannot access to the Recovery Mode to turn the phone on....!!!! I just can acces to the Download Mode, but not to recovery.
I hope you can understand my bad English
1:
this just happened to me. i was running miui at the time. if you can get miui onto your phone it has an option in button settings to use the volume rocker to turn the screen on. then i used the lock button in the notification bar to turn it off. also used a widget on the lockscreen via widgetlocker to turn the screen off so i could just turn it on to check the time/sms/email notifs real fast then turn it right back off. it took a bit getting used to the new process but hey, it worked. i ended up calling att about it and they said i still had 6 days left on my warranty so i went and exchanged it. att gives you 1 year warranty with a new captivate purchase. there may be a mod or something somewhere that allows for button reassignment. button savior maybe.
2:
not sure about that one
Is your cappy rooted? What ROM are you using? Or is it stock? I had the same problem with my experimental captivate I bought on eBay. I found a way to remap the volume button to wake the phone. This will make it a bit of a hassle to change the volume, but it was not a big deal for me since it was my experimental phone.
Off the top of my head the best way to get into recovery mode with bad buttons would be to flash a kernel or ROM that has an extended power menu.
Sent from my Captivate FASTY III KJ3 v1.2 using XDA App
Just remembered theres an app in the market called quick boot. It says you can boot into recovery with it but I haven't tried it. There may be other apps that do the same.
Sent.
Related
galaxy i9000 on froyo, rooted, one click lag fix.
out of the blue, whilst playing my gameboid emulator, phone started vibrating and rebooted. now i can not get into any of my phones data or files, all i get is a black screen, quick glimpse of my homescreen (correct times and up to date messages being received) more vibrating, then another black screen with more vibrating and a quick glimpse of my homescreen. this process continues in a loop for as long as it wants, or until i take my battery out.
my phone was one of the unfortunate bunch that got dispatched from orange that can't access recovery mode.
don't really want to send it back to orange because its rooted, so just wondering if there is any way of doing a factory reset, or any other solution to the problem would be highly appreciated.
thanks, tom.
please help i really dont want to send it back to orange
I would reinstall the stock firmware. I mean do you have a custom rom in your phone as this is all happening? If so, reinstall that rom. But which ever you have, get into download mode by one of these two methods:
Turn off your phone, hold volume down, home button, and vomlume button all at once and at the same time.
Or
Take your battery out, hold volume down, home button, and power then reinsert the battery.
What you are trying to get is a yellow android that's digging. Once/if you get into download mode, use Odin to flash the stock firmware or any custom rom that is Odin compatiable.
Sent from my GT-I9000 using XDA App
but he doesnt have the 3 button combo.........
anyway there is a way to fix the 3 button combo, put it in the search bar.
if you wanna do a hard reset and see if that clears the problem type into the dialler *2767*3855#
ah i see. still worth a shot though. my other SGS phone (vibrant) had recovery disabled, but i could get into download mode by taking the battery out and reinserting it while holding volume down, home button, and power button.
PROBLEM
JUST FLASH NEW ROM VIA ODIN YOUR PROBLEM WILL BE short out..........................if I really help u plz click on thanks meter
Hi, everyone!
Recently, I installed CyanogenMod 7 which is probably the reason of damaged Power button. I've been keeping it pressed for a long time with X/camera/volume up etc. Anyways, I've been using it for nearly a year now, so.. I still have warranty, but it's not the case. Since I don't want to send it back yet, I come up with this question.
How to power on my Milestone WITHOUT using power button whatsoever? Even entering bootloader mode requires me to press it. Any ideas?
Even impractical ones, I don't turn it off very often, but I need to know that in case of emergency..
tried plugging it into a wall charger while its off? it always boots up my droid automatically
Sent from my Droid using Tapatalk
Oh, thank you. As far as I remember, it happened to me several times, but mosstly - there is just waving battery icon.. thanks for response though!
Additionally, how to lock screen without using Power button?-.- or access sound/flight mode/turn off menu?
cm7 has status bar toggles for all of that, if you still have it installed. dont know if theres any way to access the regular phone options menu without using the power button though, sorry
Sent from my Droid using Tapatalk
Well, I turned on status bar widgets and Locking widget too, but.. it apparently disables auto-locking screen, instead of locking on demand..
The go to sleep status bar widget in cm7 interface settings. That's the one that shuts off the screen and locks the phone. Tried it myself before posting.
Sent from my Droid using Tapatalk
Geez.
I apologize for caused confusion, I didn't notice it at first... I set my volume up/down as waking buttons and widget for going to sleep
Awesome support, splashattack, thank you very much!
I am having same problem.
I connect my cell to my laptop and it starts. I am using custom ROM.
I want to rollback to stock, so that I can avail warranty on it.
Any idea how to enter bootloader mode without power button
I tried terminal emulator
su
reboot recovery
Click to expand...
Click to collapse
But it reboots to OR not to bootloader.
Any solution for bootloader ? or any command?
EDIT
Its solved. I have assigned volume rocker for screen unlock,
I rebooted it using terminal emulator, Pressed and hold volume rocker + Dpad - up and I entered bootloader.
i am always thinking that a button at the front would have been great in order to unlock the phone easier....
try button remapper
my power button is no longer working. I try a lot of apps: nolock, lock 2.0, power off, lock screen widget, anylock .... but almost is turn off display, can't wake up with volume button.
please help me how to do it ? Thanks.
jackma123 said:
my power button is no longer working. I try a lot of apps: nolock, lock 2.0, power off, lock screen widget, anylock .... but almost is turn off display, can't wake up with volume button.
please help me how to do it ? Thanks.
Click to expand...
Click to collapse
I don't know what ROM you're running, but MIUI has the option to do what you're asking. It's in the settings menu (I believe under Lockscreen).
oh, ROM CM7 have it also, but I want separate app. Do you know any apps ?
Widget locker. Like 3 bucks in market enable easy wake
Sent from my Samsung Galaxy S Captivate with ICS and a broken power button.
i just ran into the same problem. golocker is working great for me. and its free in the market.
Also MiLocker.
Fix Broken Power Button by Destil
I found this..
market.android.com/details?id=cz.destil.fixbrokenpb&hl=en
When I tried to download it said it wasn't compatible with captivate but I found the .apk and it ended up working. I attached the .apk I was using to this post.
Another thought, I took my phone apart and cleaned it. I took everything apart down to the motherboard and I poured a little rubbing alcohol on the actual button and pressed it a bunch of times (no battery in of course) and after it dried out it seemed to help get it working again.
Also, when I started having problems again I installed a different kernel and that seemed to help as well. Who knows.. but it has been working ever since.
The Fix Broken Power Button by Destil .apk is below
Thank you topiratiko, I was about to go crazy worrying about not being unable to turn my screen on. But what will I do if the phone shuts off? How will I turn it on? My power button seems to be unable to work.
kbolt said:
Thank you topiratiko, I was about to go crazy worrying about not being unable to turn my screen on. But what will I do if the phone shuts off? How will I turn it on? My power button seems to be unable to work.
Click to expand...
Click to collapse
You can allways go into download mode and flash a kernel for ex and check reboot so it'll boot up, or even better use a jig by inserting it for just a bit to power on and to avoid download mode.
If your phone's power button is in a 'pressed' state, like mine, (turns on automatically when battery is inserted), it is a hardware issue.
Here is a hassle free alternative to turn on the phone when it is in sleep mode, without relying on the power key!! Takes a minute or two only!!
1. Get 'Go launcher' from the app market (play)
2. Get 'Go Locker'
3. Now Enable Go Locker on your device. And you are done!!
When the screen goes black again, Just press the volume button, The screen wakes up!!
Using this method you don't lose the normal functionality of the volume rocker!!
I recalled that I used to have Go Locker on my phone, and that when I pressed the Volume key the screen turned on!!
At that time I found it a little annoying, But now it has turned out to be such a gift!!
* For this method to work, your phone has to be rooted.
The power button is not going to work until the hardware is repaired, I prefer to use this method, because it is a safe and quick method!!
Believe me I looked around the internet and this forum for a fix, The usual method: editing the system files on the phone, and after which the volume button cannot be used to control the volume.
For those looking for a quick fix, just follow my method!
Cheers!
There are also several roms out there that have the volume rocker wake built into the rom without making it completely useless for it intended purpose. As well as several that offer a go to sleep toggle in the notification window so you can lock your phone again.
so this is a hardware issue ? i had been using the go locker i been using but the power button is annoying cus it keep showing the power button options . and killing my battery.
only fix is samsung?
Pretty much every version of cm for cappy has volume rocker wake as an option, because of this common problem. I use app called turn off screen as well.
Natureboyhcg said:
so this is a hardware issue? only fix is samsung?
Click to expand...
Click to collapse
I had the exact same problem with my Epic Touch 4G. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. I couldn't figure out what it the world was causing the issue, until it got worse. Then, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the proper replacement switch you'll need.
(They don't include the required skills to properly desolder/solder it, however. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron.)
Okay so my power button just randomly stopped working after some random time. it doesnt work ANYWHERE. to lock my screen, to unlcok my screen, in recovery mode i cant press anything cuase it doesnt WORK. i no its a hardware issue becuase of this. i did google this but found nothing. what can i do to fix it.
i tried a battery pull and putting it back and going to recovery to factory reset but as soon as i put my battery in my phone starts up. i can enter recovery but the power button doesnt work so i cant press anything.
my warranty is over by a long shot ( had it since it released) so cant return it.
any help would be appreciated. all i need is a way to turn my phone on and off nothing about the recovery and stuff. but if you do find someting for it that would be even more amazing.
and has this happened to anyone else, just wondering is all if this is common or rare.
thnx in advance.
it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
One approach; you could read up on ways to clean the power button and see if that works. Or send it off to mobiletechvideos.com and he will fix it for a reasonable fee.
laughingT said:
it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
Click to expand...
Click to collapse
i am running Aocp 5 android 4.2.1
hve been running it for a few weeks now and no problem till now
Okay, start by seeing if you can clean the power button, that may fix it for now. Again, search 'captivate power button' to find some threads about ways to clean it.
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Assuming your power key is stuck on, remove the battery, hold the up and down volume buttons and reinsert the battery to get into recovery. This will allow you to test keys, wipe, and any other function in CWM.
With the phone on and fully booted into JB, go find volume rocker wake in the system setting options and make sure it is active. Hitting the up/down key will wake the screen when it sleeps. Add the sleep/lock toggle to your notification bar menu and you have a way to instantly lock the screen without the power key.
If you still have a bad power button stuck in on position, then you will need to take out the battery to turn it off.
Hope this helps.
laughingT said:
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Click to expand...
Click to collapse
Thnx for the help but Which button does what?
Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium
THANK YOU!!!!!!
4-2ndtwin said:
Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
THANK YOU BOTH (4-2ndtwin AND laughingT) SOOOOO MUCH
IF I HAD THE CHANCE I WOULD DONATE TO YOU BUT I CANT CUZ IM ONLY 14
SRY.
No prob. Glad to help.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
No prob. Glad to help.
Click to expand...
Click to collapse
+1
Now to turn off phone?
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
Get a app or widget for it.
Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.
laughingT said:
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.
Click to expand...
Click to collapse
Oh that would be impossible, the OS isn't loaded so even less the apps
I was suggesting a app to turn off the phone/lock screen. There are widgets for that in the market.
Jack Jake said:
Okay so my power button just randomly stopped working after some random time.
Click to expand...
Click to collapse
I had a very similar problem with my Epic 4G Touch (Sprint S2) - my phone would randomly reboot, and it kept getting worse and worse. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. Eventually, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the switch you'll need.
(They don't include the skills needed to solder it in place. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron and a steady hand. Do you have a friend who's good at soldering?)
awoolf said:
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Click to expand...
Click to collapse
well thanks for the reply, but i dont need it anymore. my friend conveniently had a GNex (old) and gave it to me as a present. so i dont use my captivate that much anymore.