model i.d incorrect error need help please - HTC Incredible S

I currently have a custom rom and i want to flash back to stock
I have created a gold card on 2 different sd cards and loaded the RUU on to them and when i try fastboot a blue bar loads up the top right hand side fully but then i get :
Model ID incorrect!
Update Fail!
Press <POWER> to reboot.
Now im possive i have followed the steps perfectly in tutorials on how to create the gold card and ive also tried the gold card tool.
my bootloader screen reads as follows:
VIVO PVT SHIP S-OFF RL
HBOOT-1.13.0000
RADIO-3805.06.03.03_M
eMMC-boot
Am i possibly trying to run the wrong rom from bootloader
this is the one i tried to flash
RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199308_signed
if so could someone point me in the right direction as to which RUU I should be trying to boot
Im living in Ireland so Im looking for a debranded E.U rom
also i should point out my usb wont connect to the computer from the phone so i cant just run the RUU exe. files
so i am loading PGIMG32.zips from the card
Any help would be greatly appreciated i am being driven insane here as I've only recently swapped somebody for this phone and it isnt functioning properly

jonnyboy-behan said:
I currently have a custom rom and i want to flash back to stock
I have created a gold card on 2 different sd cards and loaded the RUU on to them and when i try fastboot a blue bar loads up the top right hand side fully but then i get :
Model ID incorrect!
Update Fail!
Press <POWER> to reboot.
Now im possive i have followed the steps perfectly in tutorials on how to create the gold card and ive also tried the gold card tool.
my bootloader screen reads as follows:
VIVO PVT SHIP S-OFF RL
HBOOT-1.13.0000
RADIO-3805.06.03.03_M
eMMC-boot
Am i possibly trying to run the wrong rom from bootloader
this is the one i tried to flash
RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199308_signed
if so could someone point me in the right direction as to which RUU I should be trying to boot
Im living in Ireland so Im looking for a debranded E.U rom
also i should point out my usb wont connect to the computer from the phone so i cant just run the RUU exe. files
so i am loading PGIMG32.zips from the card
Any help would be greatly appreciated i am being driven insane here as I've only recently swapped somebody for this phone and it isnt functioning properly
Click to expand...
Click to collapse
Ok, so you took the WWE 2.30.405.1 RUU and extracted the ROM.zip and copied it to your SD card and renamed it PG32IMG.zip, right? That should be the correct ROM to flash for a S710E IncS (European), so I'm not sure why you are getting the wrong Model Id, especially since you are S-OFF.

Y cant u use other rom which is related to ur region?
Did you s-off via revolutionary method?

Ye i did exactly as you mentioned tbpklake its baffling me aswell
The phone was s-off when I recieved it with revolution hd flashed on it
If anyone can help is really be delighted all the sensors on the phone aren't working and the usb slot isn't functioning properly can only charge from it my heads wrecked

jonnyboy-behan said:
Ye i did exactly as you mentioned tbpklake its baffling me aswell
The phone was s-off when I recieved it with revolution hd flashed on it
If anyone can help is really be delighted all the sensors on the phone aren't working and the usb slot isn't functioning properly can only charge from it my heads wrecked
Click to expand...
Click to collapse
OK, it is a fully rooted version of the stock ROM you are trying to flash. Why don't you try it.
http://forum.xda-developers.com/showthread.php?t=1168796

flashed that rom you linked me to there and same thing no sensors working on the phone
Its obviously some sort of hardware problem that im unfortunatly going to have to put up with now
I cant even flash a new radio cause i get the same model i.d error in bootloader this is a nightmare

jonnyboy-behan said:
flashed that rom you linked me to there and same thing no sensors working on the phone
Its obviously some sort of hardware problem that im unfortunatly going to have to put up with now
I cant even flash a new radio cause i get the same model i.d error in bootloader this is a nightmare
Click to expand...
Click to collapse
give me the android-info.txt file of your rom you are flashing.

rewrite the model id of ur rom. make new txt file, rename to android-info.txt, and rewrite it
how?
fastboot usb
cmd : fastboot getvar all
then copy down modelid, cidnum, and mainver
format:
modelid:
cidnum:
mainver:
then paste it into your rom. try and see if it works ( it did for me)
edit: pasting into your rom means, unzip your rom.zip, then repack them into PG32IMG.zip using winrar or whatever

shiningarmor said:
rewrite the model id of ur rom. make new txt file, rename to android-info.txt, and rewrite it
how?
fastboot usb
cmd : fastboot getvar all
then copy down modelid, cidnum, and mainver
format:
modelid:
cidnum:
mainver:
then paste it into your rom. try and see if it works ( it did for me)
edit: pasting into your rom means, unzip your rom.zip, then repack them into PG32IMG.zip using winrar or whatever
Click to expand...
Click to collapse
should work. i was going to do the same thing but he didn't respond

aplogies for only resonding now i have only recently got back online ive downloaded RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.480 2.30.0822U_3822.10.08.28_M_release_227170_signed.exe
and i'm having the exact same error as before which i mentioned in my first post
i can only flash via sd card since my usb is only letting me charge my phone and not connect it to the computer error 43 occurs
i cant fastboot usb because my usb wont connect to my phone wont connect to my computer is there any other way i can get those values you mentioned

S-on your phone first then try flashing again..
And download the gold card helper from market and double check the reverse cid number before you make gold card this time..
Gold card doesn't work once you format your sdcard so you have to make gold card again after formatting..
Sent from my HTC Incredible S using Tapatalk

Could you link me how I can s-on my phone without havin a USB connection

jonnyboy-behan said:
Could you link me how I can s-on my phone without havin a USB connection
Click to expand...
Click to collapse
I think its not possible without USB connection because we flash hboot files via fastboot command, and if it is possible I don't know the method of doing that sorry bro..
Sent from my HTC Incredible S using Tapatalk

jonnyboy-behan said:
Could you link me how I can s-on my phone without havin a USB connection
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1287111

ajeya said:
http://forum.xda-developers.com/showthread.php?t=1287111
Click to expand...
Click to collapse
This method alone won't give s-on.. after doing this you have to extract hboot.img from the Rom you just flashed and push it to device via fastboot command and for that we need USB working if I am not wrong..
Fastboot flash hboot <hboot file name.img>
Sent from my HTC Incredible S using Tapatalk

jonnyboy-behan said:
I currently have a custom rom and i want to flash back to stock
I have created a gold card on 2 different sd cards and loaded the RUU on to them and when i try fastboot a blue bar loads up the top right hand side fully but then i get :
Model ID incorrect!
Update Fail!
Press <POWER> to reboot.
Now im possive i have followed the steps perfectly in tutorials on how to create the gold card and ive also tried the gold card tool.
my bootloader screen reads as follows:
VIVO PVT SHIP S-OFF RL
HBOOT-1.13.0000
RADIO-3805.06.03.03_M
eMMC-boot
Am i possibly trying to run the wrong rom from bootloader
this is the one i tried to flash
RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199308_signed
if so could someone point me in the right direction as to which RUU I should be trying to boot
Im living in Ireland so Im looking for a debranded E.U rom
also i should point out my usb wont connect to the computer from the phone so i cant just run the RUU exe. files
so i am loading PGIMG32.zips from the card
Any help would be greatly appreciated i am being driven insane here as I've only recently swapped somebody for this phone and it isnt functioning properly
Click to expand...
Click to collapse
Are you from canada? If so you need to change one number in the text file in the ruu. Get back to me and let me know..I flashed a radio and had to do the same thing

Related

Easy Guide to revert back to S-ON for warranty!

Hi guys, Once again this guide thread comes from the mixture of everyone suggestions and ideas to make your phone S-ON with shipped ROM for warranty!
Collected the following info from the thread, Not my own idea!
First install the ADB and SDK tools and folders, mainly install the Fastboot!
If u dont have fastboot enabled see this http://wiki.cyanogenmod.com/wiki/Fastboot and this http://dottech.org/tipsntricks/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone/
First Go here http://forum.xda-developers.com/showthread.php?t=1033922 and install the shipped ROM which u had before .
Use this method http://forum.xda-developers.com/showpost.php?p=18079795&postcount=1 to install the ROM, But this alone wont get you s-on when you do the process from the above link, Your phone will be Physically S-On but in the bootloader it will still show you s-off!
To change the bootloader to s-on then you need to follow the steps below,
1 . Now download this file from http://alpharev.nl/vivo_downgrade.img
2 . You should enable USB debugging mode, Turn your phone into FastBoot by unchecking the fastboot option in power settings
3 . Now your device will be switched off Remove your battery and insert it again.
4 . Now press (VOL DOWN + POWER Button) You will go into bootloader menu.
5 . When you boot into HBOOT, The first option is FASTBOOT. You select the menu options using the Volume Up/Down key. Once you select FASTBOOT menu, press the Power Button and it will take you to the FASTBOOT menu.
6 . Plug your USB cable in and the screen should change to FASTBOOT USB. Then on your PC, open a CMD window and change to the directory where you have installed the Android SDK tools, such adb.exe, fastboot.exe, etc. In the CMD window you would type the command:
fastboot flash hboot vivo_downgrade.img
7 . Wait for sometime, Then you would type the next command:
fastboot reboot-bootloader
8 . Now this is a tricky step, You should Select and open the ROM package you downloaded (But dont install) go to C:\Users\%username%\AppData\Local\Temp and at last folder find rom.zip
9 . You need to open the ROM.zip file and extract the file HBOOT.img from it and copy it to the same directory as the vivo_downgrade.img. Then you would type the command
fastboot flash hboot HBOOT.img
10 . Now again, wait for sometime type the next command:
fastboot reboot-bootloader
That's it you are back to s-on with stock !!!
You may check this by booting your device into BOOTLOADER , If it shows S-on, that's all You Performed the steps correctly!
If you are stuck at SECURITY WARNING BOOTLOADER because of missing some steps, Go to this following thread
http://forum.xda-developers.com/showpost.php?p=18706124&postcount=6
If you have a faulty USB port shake the usb cable it should definitely work at some angel, worked for me!
Thanks to ehsan76, John Anderton, tpbklake, exnerjan
Definitely it willl work
Tested myself!
thanks bro, this is quite useful
Thank you !
Thank you so much my friend ! you really helped me a lot ! now i can root and flash roms feeling safe that i can SN-ON any time again !
ps : I tried the method , it works perfectly !
thanks again !
hassanhm said:
Thank you so much my friend ! you really helped me a lot ! now i can root and flash roms feeling safe that i can SN-ON any time again !
ps : I tried the method , it works perfectly !
thanks again !
Click to expand...
Click to collapse
Glad it worked for you
And this method by santhoshpirate did't work 4 me,
okay i'll tell u one more time, mb it's gonna be quite clear:
i got in the hboot next text:
VIVO PVT SHIIP S-OFF RL
HBOOT-1.13.0000
RADIO-3805.06.03.03_M
But fo real my phone is s-on Revolutionary tell's me that it's s-on, i looking the awy that the right information was in the HBOOT. i hope you understood me.
and yes, i can use OTA update.
Thz, will try it when I.need.to. get bck.the waRranty
Sent from my HTC Incredible S using XDA App
lolkasasa said:
And this method by santhoshpirate did't work 4 me,
okay i'll tell u one more time, mb it's gonna be quite clear:
i got in the hboot next text:
VIVO PVT SHIIP S-OFF RL
HBOOT-1.13.0000
RADIO-3805.06.03.03_M
But fo real my phone is s-on Revolutionary tell's me that it's s-on, i looking the awy that the right information was in the HBOOT. i hope you understood me.
and yes, i can use OTA update.
Click to expand...
Click to collapse
Have you flashed both the .img file correctly?
Sent from my HTC Incredible S using xda premium
yep flash - rebbot - flash - reboot.
Ok now.. s-off ur phone using revolutionary method again and do the whole process(restoring s-on from first as posted in my thread) again..
It should definitely work.. i guarantee it!!
did it about 10 dimes with different ROMS and Hboots.
lolkasasa said:
did it about 10 dimes with different ROMS and Hboots.
Click to expand...
Click to collapse
Now u have custom Rom or the stock ruu which is physically s-on?
Sent from my HTC Incredible S using xda premium
fot ruu rom with sense 3.0 and 2.00.0000 and got S-oFF typed in Hboot but physically s-0n.
now s-off ur device via revolutionary again and install a custom rom , then follow the whole process a posted in the main thread, it should definitely work for your hboot!
santhoshpirate said:
now s-off ur device via revolutionary again and install a custom rom , then follow the whole process a posted in the main thread, it should definitely work for your hboot!
Click to expand...
Click to collapse
Hi Santhosh, Thanks for the detailed steps for guys like me.
I have S-off and Revolutionary recovery and nik's custom rom, i would like to go back to stock rom to get the new update. But do now how to go.
One more thing is you have mentioned that we have to download the shipped rom. But i am not sure which file i have to download and execute it .I am from india and very very newbie here.
Please help me how should i go back to the custom rom and with S-On in order to receive the OTA Update from HTC
sathishmk0280 said:
Hi Santhosh, Thanks for the detailed steps for guys like me.
I have S-off and Revolutionary recovery and nik's custom rom, i would like to go back to stock rom to get the new update. But do now how to go.
One more thing is you have mentioned that we have to download the shipped rom. But i am not sure which file i have to download and execute it .I am from india and very very newbie here.
Please help me how should i go back to the custom rom and with S-On in order to receive the OTA Update from HTC
Click to expand...
Click to collapse
hI SATISH
if u revert back to s-on to update the latest OTA you cannot s-off ur device again because it comes with a newer bootloader.. To know which RUU you should install, then check with fastboot getvar all to know your mainver
Read my full thread and also this http://forum.xda-developers.com/showpost.php?p=16684717&postcount=38
Everything is inside those two threads .. just sit and read .. You will figure it out!
santhoshpirate said:
hI SATISH
if u revert back to s-on to update the latest OTA you cannot s-off ur device again because it comes with a newer bootloader.. To know which RUU you should install, then check with fastboot getvar all to know your mainver
Read my full thread and also this http://forum.xda-developers.com/showpost.php?p=16684717&postcount=38
Everything is inside those two threads .. just sit and read .. You will figure it out!
Click to expand...
Click to collapse
Hi Santosh,
Thank you for the update, I had infact done the S-on ( dont know how i managed to do it, i was having the OTA update somewhere, and i run it as PG32IMG.zip and then flashed the HBOOT image file as you have mentioned and voila the S_ON is back. ).
I know there is no option for S_off again, but i have my bet on you dev's.
Is the update for 2.3.5 is released for indian IS user's or any expected date.?
Waiting to see how the performance.
sathishmk0280 said:
Hi Santosh,
Thank you for the update, I had infact done the S-on ( dont know how i managed to do it, i was having the OTA update somewhere, and i run it as PG32IMG.zip and then flashed the HBOOT image file as you have mentioned and voila the S_ON is back. ).
I know there is no option for S_off again, but i have my bet on you dev's.
Is the update for 2.3.5 is released for indian IS user's or any expected date.?
Waiting to see how the performance.
Click to expand...
Click to collapse
Ya it's worldwide we the indian users will get the OTA in couple of days.. Can you please tell your software number..
If it is 2.12.720.5 please do share with us..! Some of the indian users need the OTA software
Thanks in advance!
santhoshpirate said:
Ya it's worldwide we the indian users will get the OTA in couple of days.. Can you please tell your software number..
If it is 2.12.720.5 please do share with us..! Some of the indian users need the OTA software
Thanks in advance!
Click to expand...
Click to collapse
Hi Santhosh,
This is the file i am having.
OTA_Vivo_Gingerbread_S_hTC_Asia_India_2.12.720.5-1.36.720.1_release. If this is the one Please let me know how should i upload.
Ya this is the one and please upload... It will be really appreciated .. upload it in multiupload and give the link in the shipped rom collection..then football will do the remaining to upload it in file factory
Once again thanks
Sent from my HTC Incredible S using xda premium
I get stuck between step 6 and 7. I entered the command but it keeps saying: sending 'hboot' <1024 KB>...
Any tips?
EDIT: After couple of times trying and turning usb debugging off instead of on it worked (maybe helpful information if others have the same problem)

Which RUU must i need?

Hai,
First... i'm from holland and sorry for my bad english!
My problem
I have a Incredible S made in Twaiwan and i search for a RUU that works!
I have try the follow one and comes a error 155.
Maby the wrong RUU?
I have try this one:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed
Can you help me please?
Thanks!
xander1986 said:
Hai,
First... i'm from holland and sorry for my bad english!
My problem
I have a Incredible S made in Twaiwan and i search for a RUU that works!
I have try the follow one and comes a error 155.
Maby the wrong RUU?
I have try this one:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed
Can you help me please?
Thanks!
Click to expand...
Click to collapse
The error 155 usually means that you are attempting to run a RUU on an unlocked HBOOT. You must relock the unlock boot loader and then you will be able to run the RUU. You may also need to create a goldcard to flash a WWE ROM on a Twaiwan IncS.
Ok how can i flash this goldcard?
xander1986 said:
Ok how can i flash this goldcard?
Click to expand...
Click to collapse
There is a process that turns your SD card into a goldcard so that you can flash RUUs from different regions. Once you make a goldcard, you can continue to use it as a normal SD card. Search xda for the procedure.
It's resolved! Thank you!
The thanks button is good for situations like these.
Hi, I bricked my htc incredible s.
After unbricking with jtag I have writed only bootloader with s-ON.
Recovery not working.
My phone has cid: BM___001 mid: PG3213000
I tried flash ruu rom from PG32IMG.zip i get a several errors
if i flash rom with PG3212000 i am geting wrong mid error
if rom cid not BM_001 i geting error wrong cid
if I manualy changin these parameter in android-info.txt i get signature error
tried flash from stock exe files like
RUU_Vivo_Gingerbread_S_BM_2.28.666.3_Radio_20.2805.30.085AU_3805.04.03.27_M_release_199657_signed.exe
RUU_Vivo_Gingerbread_S_Sasktel_Canada_WWE_2.33.669.2_Radio_20.2810.30.085AU_3805.06.03.16_M_release_203211_signed.exe
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
same errors
port working not well
cant flash recovery, geting signature check error
What can I do?
Beneris said:
Hi, I bricked my htc incredible s.
After unbricking with jtag I have writed only bootloader with s-ON.
Recovery not working.
My phone has cid: BM___001 mid: PG3213000
I tried flash ruu rom from PG32IMG.zip i get a several errors
if i flash rom with PG3212000 i am geting wrong mid error
if rom cid not BM_001 i geting error wrong cid
if I manualy changin these parameter in android-info.txt i get signature error
tried flash from stock exe files like
RUU_Vivo_Gingerbread_S_BM_2.28.666.3_Radio_20.2805.30.085AU_3805.04.03.27_M_release_199657_signed.exe
RUU_Vivo_Gingerbread_S_Sasktel_Canada_WWE_2.33.669.2_Radio_20.2810.30.085AU_3805.06.03.16_M_release_203211_signed.exe
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
same errors
port working not well
cant flash recovery, geting signature check error
What can I do?
Click to expand...
Click to collapse
Create a goldcard and then flash the RUU:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.480 2.30.0822U_3822.10.08.28_M_release_227170_signed.e xe
It is really strange that you have a PG3213000 but your CID is BM_0001 but a goldcard should allow you to flash the WWE RUU.
And another stupid question
If i make gold card with my another android phone (HTC Dream) do hi works in HTC Incredible S?
Beneris said:
And another stupid question
If i make gold card with my another android phone (HTC Dream) do hi works in HTC Incredible S?
Click to expand...
Click to collapse
Yes a goldcard is not specific to the phone it was created on. It is a special signature on the SD card that HTC is able to read.
Maked goldcard and same CID error
ht tp://img40.imageshack.us/img40/9578/ciderrorwithgoldcard.jpg
Any options?
Beneris said:
Maked goldcard and same CID error
ht tp://img40.imageshack.us/img40/9578/ciderrorwithgoldcard.jpg
Any options?
Click to expand...
Click to collapse
What procedure did you use to create the goldcard? It appears that the goldcard did not work.
You are trying to flash the 3.08.405.2 RUU, correct?
No, flashed this rom WWE_3.08.405.3, (3.08.405.2).
1. Inserted sdcard to htc derise hd
2. Unmounted from system
3. With GoldCardTool_0.0.5 readed card CID
4. From webpage with cid generated goldcard.img
5. And finaly with button [Load GoldCard.img] finished job
Cheked with DxH Hexeditor goldcard.img and SdCard first 170 lines the same.
another strange detail, nn the other side my phone model writed PG32120 but connsole said PG3213000
Beneris said:
No, flashed this rom WWE_3.08.405.3, (3.08.405.2).
1. Inserted sdcard to htc derise hd
2. Unmounted from system
3. With GoldCardTool_0.0.5 readed card CID
4. From webpage with cid generated goldcard.img
5. And finaly with button [Load GoldCard.img] finished job
Cheked with DxH Hexeditor goldcard.img and SdCard first 170 lines the same.
another strange detail, nn the other side my phone model writed PG32120 but connsole said PG3213000
Click to expand...
Click to collapse
OK, that is making more sense now. I was wondering how you had CID of BM_0001 with a PG321300 model. You need to flash this RUU:
http://www.filefactory.com/file/c0a...5AU_3805.04.03.27_M_release_199657_signed.exe
On a side note, since you created it on a HTC Desire HD, did you use the right MMC value? You need to use MMC1 not MMC0.
Thanks a lot, my error was MMC0 value.
Now i maked right GoldCard.
Tried flash RUU_Vivo_Gingerbread_S_BM_2.28.666.3_Radio_20.2805.30.085AU_3805.04.03.27_M_ elease_199657_signed but after ZIP check, phone didn't done anything.
Second time flashed
RUU_Vivo_Gingerbread_S_BM_2.28.666.3_Radio_20.2805.30.085AU_3805.04.03.27_M_release_199657_signed successful
One prob, wifi not working. Wifi wasn't worked and with others roms before brick.
Now in my settings showing Wifi mac address Unavailable
Do I missing wifi driver? I was told that wifi micro chip is new. (The man who writed a bootloader said to me)

[Q] Back to stock for Waranty

Hi,
I need to get my phone back to stock for warranty before my USB port completely dies (not it works only at certain angles).
I read few threads regarding getting the phone back to stock but I am missing few infos I am asking for your help on this.
The data that I got and believe that is needed:
mainver: 2.32.1010.1
RADIO: 3822.01.08.14_M
HBOOT: 6.13.1002
and I bough phone in Switzerland and have: HTC_GER version (102)
I believe that following the post http://forum.xda-developers.com/showthread.php?t=1359555 is the way to go.
Which RUU do I use due to my mainver ang HTC_GER?
Will vivo_downgrade.img from mentioned thread work for me; basically should the procedure and links on mentioned thread work for my phone?
Thank you very much!
mrepovz said:
Hi,
I need to get my phone back to stock for warranty before my USB port completely dies (not it works only at certain angles).
I read few threads regarding getting the phone back to stock but I am missing few infos I am asking for your help on this.
The data that I got and believe that is needed:
mainver: 2.32.1010.1
RADIO: 3822.01.08.14_M
HBOOT: 6.13.1002
and I bough phone in Switzerland and have: HTC_GER version (102)
I believe that following the post http://forum.xda-developers.com/showthread.php?t=1359555 is the way to go.
Which RUU do I use due to my mainver ang HTC_GER?
Will vivo_downgrade.img from mentioned thread work for me; basically should the procedure and links on mentioned thread work for my phone?
Thank you very much!
Click to expand...
Click to collapse
Yes you have found the correct procedure to follow:
At this link:
http://forum.xda-developers.com/showthread.php?t=1033922
I noticed that they have the 2.32.1010.1 RUU that you should use given the current mainver you have.
Thank you but I do have a question regarding the radio.
Will I have a problem flashing mainver RUU since I upgraded the radio or will everything work ok?
Sent from my HTC Incredible S using XDA App
mrepovz said:
Thank you but I do have a question regarding the radio.
Will I have a problem flashing mainver RUU since I upgraded the radio or will everything work ok?
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
The RUU should work
I checked on http://www.filefactory.com/f/e45d6fe3dcf51228/ for ROM for mainver: 2.32.1010.1 nad it is KT_KR (honestly I do not know what it stands for) but I figured out that my phone is suppose to have HTC_GER version (102).
How will that work for warranty - which ROM to use?
mrepovz said:
I checked on http://www.filefactory.com/f/e45d6fe3dcf51228/ for ROM for mainver: 2.32.1010.1 nad it is KT_KR (honestly I do not know what it stands for) but I figured out that my phone is suppose to have HTC_GER version (102).
How will that work for warranty - which ROM to use?
Click to expand...
Click to collapse
Then you will need to use the 3.08.405.3 version because the 2.30.405.1 version is lower than the mainver that your phone is reporting. You only option is to use a RUU with a higher version. You should be able to use 3.08.405.3 for your region.
Now I am stuck at splash screen.
What I did is download RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
got out the rom.zip file, renamed it to PG32...zip and rebooted my phone to update (go back to stock ROM). Later my intentions were to use the vivodowngrade to get back to S-ON.
After the update I am stuck at HTC logo. What to do?
mrepovz said:
Now I am stuck at splash screen.
What I did is download RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
got out the rom.zip file, renamed it to PG32...zip and rebooted my phone to update (go back to stock ROM). Later my intentions were to use the vivodowngrade to get back to S-ON.
After the update I am stuck at HTC logo. What to do?
Click to expand...
Click to collapse
Just follow this guide.
I managed to somehow get it to the next state:
I installed a rom.zip form (RUU_Vivo_Gingerbread_S_KT_KR_2.32.1010.1_Radio_20.2810.30.085AU_3805.06.03.16_M_release_199684_signe.exe) since it has the same maiver as I had it by renaming it to PG32IMG.zip and placing it to the SD.
After "flashing" it wrote me that it is a wrong version. The result:
If I turn it off it turns on again by it self (I can't turn it off unless i bull the battery) and it displays (no ROM is started):
**** Security Warning****
VIVO PVT SHIP S-ON RL
HBOOT-1.13.0000
RADIO-3805.06.03.16_M
eMMC-boot
...
...
...
It looks like it is S-ON - is this correct? (I might have done something wright )
Can I now try to install a RUU (RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe) ? or do I have to get rom.zip and the procedure on http://forum.xda-developers.com/showthread.php?t=1359555 ?
Thank you!
I tried to install via RUU and it worked
Thanks everyone for help

Official WWE 4.10.405.1 Release RUU Out!

Found it here:
b b s.fengbao.com/thread-1025448-1-1.html
RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266013_signed.exe
Edit: Just saw it mentioned in another post so apologies if this info is already around. Hasn't been out long though as far as I can tell!
P.S. Also found the following two files in my wanderings for Australians who may wish to restore their Incredible S with provider ROM:
RUU_VIVO_SENSE30_S_Optus_AU_3.09.980.4_Radio_20.4802.30.0822U_3822.10.08.28_M_release_230422_signed.exe
RUU_VIVO_SENSE30_S_Virgin_Mobile_AU_3.09.981.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_230704_signed.exe
If required/requested just tell me where to upload!
n1cnak said:
Found it here:
b b s.fengbao.com/thread-1025448-1-1.html
RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266013_signed.exe
Edit: Just saw it mentioned in another post so apologies if this info is already around. Hasn't been out long though as far as I can tell!
P.S. Also found the following two files in my wanderings for Australians who may wish to restore their Incredible S with provider ROM:
RUU_VIVO_SENSE30_S_Optus_AU_3.09.980.4_Radio_20.4802.30.0822U_3822.10.08.28_M_release_230422_signed.exe
RUU_VIVO_SENSE30_S_Virgin_Mobile_AU_3.09.981.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_230704_signed.exe
If required/requested just tell me where to upload!
Click to expand...
Click to collapse
is it smooth?
it is 4.0.4,sense 3.6
Xingke Xu said:
is it smooth?
it is 4.0.4,sense 3.6
Click to expand...
Click to collapse
Yes it's android 4.0.4 with sense 3.6.
Sent from my HTC Incredible S using xda premium
Xingke Xu said:
is it smooth?
it is 4.0.4,sense 3.6
Click to expand...
Click to collapse
Yes, it is Android 4.0.4 with sense 3.6 and seems quite smooth!
Don't forget there is a Chinese version:
PG32IMG_VIVO_ICS_35_S_HTCCN_CHS_4.08.1400.2_Radio_20.72.30.0833U_3831.17.00.24_M_release_264218_signed
Link: http://d-h.st/rlu
(Courtesy of maverickdbz)
To flash that file with stock recovery you must rename to update.zip on SD-Card to apply.
i have problem with multitouch when playing game like NBA JAM and Death Racing... anyone also having this issue???
reserved
I am trying to upgrade the RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.3 0.0833U_3831.18.00.11_M_release_266013_signed.exe rom but its giving an error "Model Id incorrect".
Here is my bootloader information:
*** BlackRose ***
VIVO PVT SHIP S-OFF
HBOOT-2.02.0002
RADIO-3831.12.00.11_M
eMMC-boot
Jun 02 2012,00:00:54
Can someone guide me what could be the possible problem? Thanks
smilling_heart said:
I am trying to upgrade the RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.3 0.0833U_3831.18.00.11_M_release_266013_signed.exe rom but its giving an error "Model Id incorrect".
Here is my bootloader information:
*** BlackRose ***
VIVO PVT SHIP S-OFF
HBOOT-2.02.0002
RADIO-3831.12.00.11_M
eMMC-boot
Jun 02 2012,00:00:54
Can someone guide me what could be the possible problem? Thanks
Click to expand...
Click to collapse
Incorrect model id. Enter this command 'fastboot getvar mid' and tell me your model id. For this ruu to work, that particular device's model id must be PG3213000.
Sent from my HTC Incredible S using xda premium
zukri90 said:
Incorrect model id. Enter this command 'fastboot getvar mid' and tell me your model id. For this ruu to work, that particular device's model id must be PG3213000.
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
Thanks Zurki90.. I just checked and its
cid: BM___001
mid: PG3212000
So its not PG3213000 as you said what should I do now? any workaround?
smilling_heart said:
Thanks Zurki90.. I just checked and its
cid: BM___001
mid: PG3212000
So its not PG3213000 as you said what should I do now? any workaround?
Click to expand...
Click to collapse
Since you are S-OFF, there is a work around, but it is not very noob friendly.
You should look at ARHD v3.0 since it is pretty close to the stock ROM.
I want to install this but my USB is not working, here are the info
VIVO PVT SHIP S-OFF
HBOOT-6.13.1002
RADIO-3805.09.03.27_M
eMMC-boot
Apr 01 2011,18:34:39
Gihanfx said:
I want to install this but my USB is not working, here are the info
VIVO PVT SHIP S-OFF
HBOOT-6.13.1002
RADIO-3805.09.03.27_M
eMMC-boot
Apr 01 2011,18:34:39
Click to expand...
Click to collapse
If you have a SD card reader, then you can flash BlackRose 2.02.0002 via the PG32IMG.zip method. And then you should be able to copy the ROM to the sd card and install it from recovery mode.
tpbklake said:
If you have a SD card reader, then you can flash BlackRose 2.02.0002 via the PG32IMG.zip method. And then you should be able to copy the ROM to the sd card and install it from recovery mode.
Click to expand...
Click to collapse
In that thread PG32IMG.zip download like is not working
http://forum.xda-developers.com/showpost.php?p=28838720&postcount=173
I have goldcard sd, when I try to install .zip it just says booting and finishes in like 2 seconds, when I reboot the screen is just white with HTC logo.
Gihanfx said:
In that thread PG32IMG.zip download like is not working
http://forum.xda-developers.com/showpost.php?p=28838720&postcount=173
Click to expand...
Click to collapse
This one works: http://d-h.st/SjY
[File courtesy of Inferi0r]
TheShorterBus said:
I have goldcard sd, when I try to install .zip it just says booting and finishes in like 2 seconds, when I reboot the screen is just white with HTC logo.
Click to expand...
Click to collapse
What's in your "install.zip"?
If you are trying to install the BlackRose bootloader just use the file I linked to above.
If you are attempting to upgrade to the 4.10.405.1 RUU via SD-Card then you must extract the rom.zip from the RUU then copy it to your SD-Card and install the upgrade via CWM or 4EXT recovery.
If you have stock recovery & your phone has either a WWE CIDnum or SuperCID then rename the rom.zip file to update.zip to install that way.
If you want to install rom.zip via goldcard then rename it to PG32IMG.zip on your gold card & boot away to upgrade!
Good luck.
P.S.
I know it's been said many-a-time but, to extract the actual ROM-File from the Rom Update Utility (RUU) these are the steps!
In Windows:
Run the RUU<-*->.exe file
When it's done extracting the setup files to your Windows drive, it will pause for user input (like accepting agreements & a "NEXT" button)
Don't give it ANY input but, since the setup window insists on being always-on-top, move it to the edge of your screen to get it out of the way.
With "Windows Explorer" (or similar) navigate to C:\Documents and Settings\"current user you're logged in as"\Local Settings\Temp
Now, make sure you're in Folder/File "Details" view with "Date Created" as one of the details (View->Choose Details...etc.)
Click "Date Created" & scroll down to the 2 most recently created folders (the folders names will be meaningless in this)
Slowly mouse over each of these folders. One will reveal it contains slightly more data than the other (for example 356MB vs 348MB)
Open the larger folder which contains another folder which will contain yet another folder!!
In the last folder of this tree scroll down until you find "rom.zip", THIS IS YOUR UPDATE ZIP FILE!!!
COPY "rom.zip" somewhere else (like the Desktop) as it will disappear when you cancel the RUU Installer.
Now simply move the RUU window onto the screen again so you can cancel it.
THAT'S IT - YOU'RE DONE! You have now extracted the rom.zip from the RUU Installer & can put it to work.
If you're wanting to do this in Linux look out for this tool/file OpenRUU-Xtract-beta2.zip
I think it has a binary for *cough*cough*puke* mac in there too.
I am constantly bewildered why Linux(for computer Genii) is psychologically paired up with mac(for rich hex-illiterate morons) simply because they are both non-Windows!!
@n1cnak I'm very interested in the Virgin and Optus Sense 3.0 RUU's that you made mention of in the OP. If you could provide download links it would be very much appreciated.
unable to have a official running ICS
zukri90 said:
Incorrect model id. Enter this command 'fastboot getvar mid' and tell me your model id. For this ruu to work, that particular device's model id must be PG3213000.
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
my phones mid is PG3213000 i installed the RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266013_signed.exe rom both using direct running the setup and PG32IMg.zip method.both methods finished without errors.but after restart i get the htc logo white screen and it doesnt move ahead.really wanted to use this official rom of ICS
phones bootloader info is
revolutionary
vivo pvt ship s-off RL
HBOOT-6.13.1002
RADIO-3831.18.00.11_M
eMMC-boot
Apr 1 2011, 18:34:39
please help .i want this rom.thanks its bought from India
ketan19 said:
my phones mid is PG3213000 i installed the RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266013_signed.exe rom both using direct running the setup and PG32IMg.zip method.both methods finished without errors.but after restart i get the htc logo white screen and it doesnt move ahead.really wanted to use this official rom of ICS
phones bootloader info is
revolutionary
vivo pvt ship s-off RL
HBOOT-6.13.1002
RADIO-3831.18.00.11_M
eMMC-boot
Apr 1 2011, 18:34:39
please help .i want this rom.thanks its bought from India
Click to expand...
Click to collapse
You need to update your Revolutionary HBOOT 6.13.1002 to the BlackRose 2.02.0002 HBOOT and then your phone should boot correctly.
The BlackRose thread can be found in the Development section.
tpbklake said:
You need to update your Revolutionary HBOOT 6.13.1002 to the BlackRose 2.02.0002 HBOOT and then your phone should boot correctly.
The BlackRose thread can be found in the Development section.
Click to expand...
Click to collapse
ok.i tried installing blackrose through the installer.it just gets stuck at waiting for device.the usb connection works otherwise for other fastboot operations.just not getting detected by blackrose setup.i am using windows 7 64 bit
ketan19 said:
ok.i tried installing blackrose through the installer.it just gets stuck at waiting for device.the usb connection works otherwise for other fastboot operations.just not getting detected by blackrose setup.i am using windows 7 64 bit
Click to expand...
Click to collapse
OK then it sounds like you need to create a PG32IMG.zip file that contains the BlackRose HBOOT image and copy that to your SD card and flash it that way.
The BlackRose installer relies on adb debugging being enabled, but if your phone won't boot, then that is why the installer stalls at "Waiting for Device".

Phone stuck on HTC screen

I tried to flash a RUU in order to get back to stock but what ended up happening was that after the installation the phone would continue to boot up on the HTC screen and continue in that manner.
When I go into Hboot mode this is the information that comes up:
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-3805.04.03.27_M
eMMc-boot
Apr 1 2011, 18:34:39
This is the RUU I used: RUU_Vivo_BellMobility_WWE_1.37.666.3_Radio_Radio_20.23.30.0802U_38.02.01.17_M_release_174461_signed
I know other people have had this problem and some of the solutions recommended were getting the rom.zip file from the RUU and renaming it to PG32IMG.zip and putting that on the root of the sdcard. I would like to know which RUU would be best for doing this as the one I previously used doesn't work.
Radar12 said:
I tried to flash a RUU in order to get back to stock but what ended up happening was that after the installation the phone would continue to boot up on the HTC screen and continue in that manner.
When I go into Hboot mode this is the information that comes up:
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-3805.04.03.27_M
eMMc-boot
Apr 1 2011, 18:34:39
This is the RUU I used: RUU_Vivo_BellMobility_WWE_1.37.666.3_Radio_Radio_20.23.30.0802U_38.02.01.17_M_release_174461_signed
I know other people have had this problem and some of the solutions recommended were getting the rom.zip file from the RUU and renaming it to PG32IMG.zip and putting that on the root of the sdcard. I would like to know which RUU would be best for doing this as the one I previously used doesn't work.
Click to expand...
Click to collapse
Since you are S-OFF with the Revolutionary HBOOT, you can not simply flash a RUU to return to stock because the Revolutionary HBOOT prevents itself from being overwritten.
Also the RUU you are attempting to flash is an old Froyo ROM and if you have run any Gingerbread based ROMs, this RUU would have caused you to radio brick your phone. In fact you may have already radio bricked it and that is why it won't boot past the HTC screen.
You need to search this forum for the correct way to remove the Revolutionary S-OFF and return to stock.
I tried using this method to get rid of S-OFF but whenever I attempt 2c I get this: error: cannot load 'vivo_downgrade.img'
http://forum.xda-developers.com/showpost.php?p=15732727&postcount=14
Radar12 said:
I tried using this method to get rid of S-OFF but whenever I attempt 2c I get this: error: cannot load 'vivo_downgrade.img'
http://forum.xda-developers.com/showpost.php?p=15732727&postcount=14
Click to expand...
Click to collapse
You need to put the vivo_downgrade.img file in the same directory where you have adb.exe and fastboot.exe.
tpbklake said:
You need to put the vivo_downgrade.img file in the same directory where you have adb.exe and fastboot.exe.
Click to expand...
Click to collapse
Yeah I did the .img file in the same directory, it might be a USB problem although on bootloader it says Fastboot USB so it should be connected properly. Still get the same error.
Radar12 said:
Yeah I did the .img file in the same directory, it might be a USB problem although on bootloader it says Fastboot USB so it should be connected properly. Still get the same error.
Click to expand...
Click to collapse
Does the command
Fastboot devices
Return anything?
What does your HBOOT screen show for the Radio version?
Radar12 said:
Yeah I did the .img file in the same directory, it might be a USB problem although on bootloader it says Fastboot USB so it should be connected properly. Still get the same error.
Click to expand...
Click to collapse
Could be a corrupt download of vivo_downgrade.img
md5sum: 47ba3561beb359fd534b89bacb6fd096
tpbklake said:
Does the command
Fastboot devices
Return anything?
What does your HBOOT screen show for the Radio version?
Click to expand...
Click to collapse
No, it doesn't return anything. And how do you check for the radio version?
Radar12 said:
No, it doesn't return anything. And how do you check for the radio version?
Click to expand...
Click to collapse
The radio version is listed on the HBOOT screen.
Ok, so you put the phone FASTBOOT USB mode, but the command fastboot devices doesn't return anything, right?
Do you have another cable or USB port to try?
Radar12 said:
No, it doesn't return anything. And how do you check for the radio version?
Click to expand...
Click to collapse
Can you post a screenshot of your fastboot command, and let us know what your fastboot directory contains?
tpbklake said:
The radio version is listed on the HBOOT screen.
Ok, so you put the phone FASTBOOT USB mode, but the command fastboot devices doesn't return anything, right?
Do you have another cable or USB port to try?
Click to expand...
Click to collapse
I think I listed the Radio version at the top, correct me if it's the wrong one.
I tried using another port but I keep getting the same error, and I don't have another cable on me.
Radar12 said:
I think I listed the Radio version at the top, correct me if it's the wrong one.
I tried using another port but I keep getting the same error, and I don't have another cable on me.
Click to expand...
Click to collapse
Ok I wasn't sure if that was before or after you tried to run the RUU?
tpbklake said:
Ok I wasn't sure if that was before or after you tried to run the RUU?
Click to expand...
Click to collapse
After running the RUU, anyway to check for the old one?
Radar12 said:
After running the RUU, anyway to check for the old one?
Click to expand...
Click to collapse
That fact that your phone is booting is a good sign and the radio version is higher than the one in the RUU you tried to run, so that is good.
tpbklake said:
That fact that your phone is booting is a good sign and the radio version is higher than the one in the RUU you tried to run, so that is good.
Click to expand...
Click to collapse
Do you know of any other way to get back to S-ON that doesn't require using the fastboot commands? None of the methods I've used so far have worked and I'm kind of stuck now.
Radar12 said:
Do you know of any other way to get back to S-ON that doesn't require using the fastboot commands? None of the methods I've used so far have worked and I'm kind of stuck now.
Click to expand...
Click to collapse
You can try running this RUU
http://d-h.st/6Ri
That should at least get you a phone that will boot.
tpbklake said:
You can try running this RUU
http://d-h.st/6Ri
That should at least get you a phone that will boot.
Click to expand...
Click to collapse
Will give it a try but should I flash this using the method I used initially or copying the .zip to the SD card?
Radar12 said:
Will give it a try but should I flash this using the method I used initially or copying the .zip to the SD card?
Click to expand...
Click to collapse
If you know how to extract the ROM.zip from the RUU and then copy that to your SD card as a PG32IMG.zip then I would try that method.
tpbklake said:
If you know how to extract the ROM.zip from the RUU and then copy that to your SD card as a PG32IMG.zip then I would try that method.
Click to expand...
Click to collapse
Thanks a lot! Phone is back up and running again, appreciate the help.
OK, so I tried using the S-ON method from here http://forum.xda-developers.com/showpost.php?p=15732727&postcount=14 again.
This time I got up to step 3b, but I don't know where the 'sdk hboot' folder is supposed to be located. Any help with this?

Categories

Resources