Database Develop

Unbrick Note after Wipe during on ICS Kernel

I just bought a used Note at an amazing price. The seller stated that after wiping.. he couldnt get it to boot.. even though the phone
manages to go in Download Mode and in Recovery Mode. I'm getting it today.. my 1st thoughts were to flash a stock rom via Odin..
should i try something else before Odin?..maybe try to flash a custom rom via the Recovery? Any ideas? Thanks in advance guys...

c0rpse_grinder said:
I just bought a used Note at an amazing price. The seller stated that after wiping.. he couldnt get it to boot.. even though the phone
manages to go in Download Mode and in Recovery Mode. I'm getting it today.. my 1st thoughts were to flash a stock rom via Odin..
should i try something else before Odin?..maybe try to flash a custom rom via the Recovery? Any ideas? Thanks in advance guys...
Click to expand...
Click to collapse
You should try to flash Stock GB Rom via ODIN first..Then you can flash custom roms after you root your device with CWM installed

Best way is to flash GB ROM
If it flash successfully then wipe cache and data rom recovery.
If note damaged with emmc brick bug, it wont bootup.

guys thanks alot for the quick replies!
i shall have the Note in about an hour or so..so i'll first attempt flashing a GB Rom via Odin..
hopefully everything will turn out ok there and i won't have to search my soul out on xda about
that emmc bug that's been mentioned:fingers-crossed:.. i shall post here the outcome soon!

so.. while i can boot into download mode and in cwm mode.. the Odin fails to flash the stock GB rom.
it gets stuck (see attachment).. what's my next step? :-/ should i try to follow this guide?

c0rpse_grinder said:
so.. while i can boot into download mode and in cwm mode.. the Odin fails to flash the stock GB rom.
it gets stuck (see attachment).. what's my next step? :-/
Click to expand...
Click to collapse
I think you just hit the emmc bug- this is the classic symptom- stuck at flashing FACTORYFS after the wipe on ICS Rom.
Take it to Samsung for repair or flash using a modified PIT file. You will lose some internal memory but the note can be revived. Search these forums for instructions! Good luck!

jkananda said:
I think you just hit the emmc bug- this is the classic symptom- stuck at flashing FACTORYFS after the wipe on ICS Rom.
Take it to Samsung for repair or flash using a modified PIT file. You will lose some internal memory but the note can be revived. Search these forums for instructions! Good luck!
Click to expand...
Click to collapse
unfortunately i dont have the receipt (so no warranty) so i guess i ll do the modified PIT file method and i'll just get a bigger sd card.. thanks for the good luck part!

so i found a few posts that seemed helpful, i tried flashing the FM-Note-Kernel_V2.0 via Odin and it was successful, after that i
tried flashing via CWM the ROCKET ROM - v23 - GB - LC1.. and it started out pretty good..the progress bar was..progressing
normally..the funny part was when the progress bar ended.. because even though it ended..it kept going..to outerspace..towards
the right end of the screen..till it reached the end of the Note's screen and it stayed there.. (see attachment) for about 6-7 mins..
after that it got past it and it stuck at "Installing Kernel" at right about half of the progress bar.. that is how it is right now.. i guess
i'll give it a bit more time before i do anything..
edit: the progress bar while in "Installing Kernel" is actually progressing....!! ridiculously slowly though.. and the fact that i'm staring at it is making it even slower
edit: we got past it! now it's at "Installing Modem" and... ITS DONE! ... i am completely terrified to reboot because i am 99,99% sure it's not gonna make me happy...
edit: indeed... no luck there

Seems your device affected with emmc brick bug
Claim your warranty
Or
Try this
http://forum.xda-developers.com/showthread.php?p=26285877
Sent from my GT-N7000 using xda premium

dr.ketan said:
Seems your device affected with emmc brick bug
Claim your warranty
Or
Try this
http://forum.xda-developers.com/showthread.php?p=26285877
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
How can i claim my warranty if i have no receipt?
Do you think they'll accept it? Also, there's the yellow triangle problem..however
i also have a jig.. could I use the jig to get rid of the triangle with the phone being
as it is?
edit: Ι'll follow the guide soon after i read it a couple of times thanks

c0rpse_grinder said:
How can i claim my warranty if i have no receipt?
Do you think they'll accept it? Also, there's the yellow triangle problem..however
i also have a jig.. could I use the jig to get rid of the triangle with the phone being
as it is?
edit: Ι'll follow the guide soon after i read it a couple of times thanks
Click to expand...
Click to collapse
Yes you can remove the traingle using a working JIG. Check here and follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1354888
Sent from my GT-N7000 using XDA Premium App

Ι got to a much better state using this guide
The phone actually boots up! After the procedure i Flashed via the Recovery a GB Rocket Rom! It boots up after a while however..
at the start of it all where it sais to click on the android to begin (right where u choose the language).. i get a repeated force close
about phone.android that won't let me use the phone........ any ideas!? we are so close!!

normally after flashing GB, you may struck at the first screen. wipe data and cache and if you can go to dalvik cache, wipe that too and reboot. good luck.

dsmas said:
normally after flashing GB, you may struck at the first screen. wipe data and cache and if you can go to dalvik cache, wipe that too and reboot. good luck.
Click to expand...
Click to collapse
i get backstabbed... it won't boot at all.. again... so.. i will try the other method with the automated PIT Files... damn it damn it...........

c0rpse_grinder said:
i get backstabbed... it won't boot at all.. again... so.. i will try the other method with the automated PIT Files... damn it damn it...........
Click to expand...
Click to collapse
Don't loose heart. why do'nt you flash another GB rom?

dsmas said:
Don't loose heart. why do'nt you flash another GB rom?
Click to expand...
Click to collapse
because it wont do anything.. its the definition of a brick..it's not even going into DL Mode with the Jig...............

u should try flashing stock rom using odin 1.87 and do remember to run it as admin.
Sent from my GT-N7000

liewkingyan said:
u should try flashing stock rom using odin 1.87 and do remember to run it as admin.
Sent from my GT-N7000
Click to expand...
Click to collapse
how can i flash anything via Odin if i cannot even get into Download Mode?
any other ideas? the phone is completely dead, as if i threw the battery down a river

May b your battery is completely empty, manage for other battery then only you can move to next step
Sent from my GT-N7000 using xda premium

dr.ketan said:
May b your battery is completely empty, manage for other battery then only you can move to next step
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
unfortunately that cant be it, right before total brickage the battery level was above 60%...
i even tried charging it but.. nothing

Stuck on the official logo after using Triangle Away

Dear Friends,
I wanted to reset the binary and flash counter values...
So I have used Triangle Away App and after downloading the needed files I have clicked on reset binary and got this msg "THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK."
I continue to the operation and after it device logged into the official logo but it stuck there only on official logo...
"Samsung Galaxy Note GT - N7000"
Nothing happening,.... What to do? Afraid to touch the device, I may brick it..
what to do...?? Please I need your help...

It seems like you didn't thnik of my advice which i gave you. hmmm
BTW if its not booting then you have to get into download mode and flash a prerooted GB rom.

sahilarora2003 said:
It seems like you didn't thnik of my advice which i gave you. hmmm
BTW if its not booting then you have to get into download mode and flash a prerooted GB rom.
Click to expand...
Click to collapse
sorry sir,
I took your advice seriously but wanted to reset the counters...
Sorry, I am very much sorry... i really mean it...

sahilarora2003 said:
It seems like you didn't thnik of my advice which i gave you. hmmm
BTW if its not booting then you have to get into download mode and flash a prerooted GB rom.
Click to expand...
Click to collapse
Would it be fine if i flash back to the Prerooted GB ROm??
I am little worried to this operation...
Please sir...

Flashing GB, just give you device back to boot normaly, Doesn't cause reset flash counter.
Wipe full after flashing GB ROM, then use Jig to reset counter OR again flash ICS and use triangle away.
Now you dont think you are paying for what you are doing?
I have marked since you got root, you are playing with flashing everday !

Sometimes that happens. Try it again when you fixed it.
Sent from my GT-N7000 using xda premium

dr.ketan said:
Flashing GB, just give you device back to boot normaly, Doesn't cause reset flash counter.
Wipe full after flashing GB ROM, then use Jig to reset counter OR again flash ICS and use triangle away.
Now you dont think you are paying for what you are doing?
I have marked since you got root, you are playing with flashing everday !
Click to expand...
Click to collapse
Sorry Ketan sir,
As I have recovered from one problem, stuck to another as you said I need to reset my counter, I stated following the thread but now I am serious, not going to flash anything above.
I just need to reset my counters. I don't know about "Jit".
I am on ICS LR6 4.04.
Please provide me the exact procedure...
I really sorry for my childish actions...
Sent from my GT-N7000 using xda premium

PierreTech said:
Sometimes that happens. Try it again when you fixed it.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
does it happen if we press power button to boot ?
TA specifically warns NOT to use power button during reset and reboot !

krishkamlesh said:
Sorry Ketan sir,
As I have recovered from one problem, stuck to another as you said I need to reset my counter, I stated following the thread but now I am serious, not going to flash anything above.
I just need to reset my counters. I don't know about "Jit".
I am on ICS LR6 4.04.
Please provide me the exact procedure...
I really sorry for my childish actions...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1354888
Here is the procedure.
You need a JIG to follow the above procedure.
PS :- Only play if you know how can you recover if something went wrong. If you don't know then stay safe, sit on you chair and read the instructions first. Its just a advice.

sahilarora2003 said:
http://forum.xda-developers.com/showthread.php?t=1354888
Here is the procedure.
You need a JIG to follow the above procedure.
PS :- Only play if you know how can you recover if something went wrong. If you don't know then stay safe, sit on you chair and read the instructions first. Its just a advice.
Click to expand...
Click to collapse
He don't have JIG, so option for him is to flash ICS and reset with Triangle Away.
+1 (Agree what you advised.)

dr.ketan said:
He don't have JIG, so option for him is to flash ICS and reset with Triangle Away.
+1 (Agree what you advised.)
Click to expand...
Click to collapse
If I will again use that app Triangle Away and again if I will stuck to the boot screen, what is advisable??
Does it may harm to my device??
I hands up from any type of risk... I don't want to go in more tension...
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:

Then safe way is to purchase JIG from Ebay.
Meantime continu using device with raised count.

dr.ketan said:
Then safe way is to purchase JIG from Ebay.
Meantime continu using device with raised count.
Click to expand...
Click to collapse
+1, you may brick your device with improper use of triangle away, by the way did you match the binary count and firmware type in download mode and in triangle away app before proceeding with reset?

jeetu1981 said:
+1, you may brick your device with improper use of triangle away, by the way did you match the binary count and firmware type in download mode and in triangle away app before proceeding with reset?
Click to expand...
Click to collapse
No there was just a suggestion that you can see the binary by pressing Vol + home+ power...
I think I made a mistake...:banghead:
Sent from my GT-N7000 using xda premium

krishkamlesh said:
No there was just a suggestion that you can see the binary by pressing Vol + home+ power...
I think I made a mistake...:banghead:
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
That's fine now, you have already made the mistake. I have used TA 4-5 times on stock ICS and it never shows the stats in app main screen, but it shows it in the special boot mode. I have used it on PA once and the flash stats were available on main screen only.
Wait for my PM.

jeetu1981 said:
That's fine now, you have already made the mistake. I have used TA 4-5 times on stock ICS and it never shows the stats in app main screen, but it shows it in the special boot mode. I have used it on PA once and the flash stats were available on main screen only.
Wait for my PM.
Click to expand...
Click to collapse
Hey, can I do the followinga???
1. Flash stock GB rom using PC odin,
2. root it and install cwm recovery
3. Flash CM9 or cm9 based custom rom using abyss GB kernel.
4. Use triangle away app to reset counter.
I can then flash rom or can again flash stock GB and return to ICS (via odin) and can root it again using new method for root, new method does not raise counter...
I have received such method....
Will it work... What do you think so???
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:

krishkamlesh said:
Hey, can I do the followinga???
1. Flash stock GB rom using PC odin,
2. root it and install cwm recovery
3. Flash CM9 or cm9 based custom rom using abyss GB kernel.
4. Use triangle away app to reset counter.
I can then flash rom or can again flash stock GB and return to ICS (via odin) and can root it again using new method for root, new method does not raise counter...
I have received such method....
Will it work... What do you think so???
|Th£ G®£@t [email protected]nt [email protected]|@x¥ |\|0t€|:banghead:
Click to expand...
Click to collapse
It should work and is working for most of the people here , but make sure to match stats in app and download mode this time, DO NOT reset counter if you are not sure and wait for JIG as said above.

krishkamlesh said:
Hey, can I do the followinga???
1. Flash stock GB rom using PC odin,
2. root it and install cwm recovery
3. Flash CM9 or cm9 based custom rom using abyss GB kernel.
4. Use triangle away app to reset counter.
I can then flash rom or can again flash stock GB and return to ICS (via odin) and can root it again using new method for root, new method does not raise counter...
I have received such method....
Will it work... What do you think so???
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
Click to expand...
Click to collapse
I really can't understand why you playing with your note if you don't know how to do it properly ?
Almost everyday you flash a new rom, then flash something hilarious which put you in trouble and you came back here for a solution ? Why you can't be with a rom for some days. Let it run for some days, take the juice out.
BTW the steps mentioned above is to be correct :-
When you have GB rooted you don't need to use Abyss. Just go to recovery and flash Rom+Gapps
Wipe Cache/Dalvik/Data(Factory Reset)
Reboot System

sahilarora2003 said:
I really can't understand why you playing with your note if you don't know how to do it properly ?
Almost everyday you flash a new rom, then flash something hilarious which put you in trouble and you came back here for a solution ? Why you can't be with a rom for some days. Let it run for some days, take the juice out.
BTW the steps mentioned above is to be correct :-
When you have GB rooted you don't need to use Abyss. Just go to recovery and flash Rom+Gapps
Wipe Cache/Dalvik/Data(Factory Reset)
Reboot System
Click to expand...
Click to collapse
I take your advice, I will not flash anything until I will get JIG in my hands...
Thanks bro...:thumbup:
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:

krishkamlesh said:
I take your advice, I will not flash anything until I will get JIG in my hands...
Thanks bro...:thumbup:
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
Click to expand...
Click to collapse
sahil sir is really suggesting you a good idea as you have a single sgn.so dont dare to play with it dude.
i am not a master but i know one thing when i flash any rom(stock or custom) is to go back to dr.ketan's pre-rooted gb rom.so i would suggest not you only,to everyone who is flashing the first time is that----please go back to pre-rooted gb rom through pc odin.then try to do whatever you want to......
and a big question is there how would you know that your counter is raised??????have you ever flashed any rom with a short way???if it is then your counter is raised.if not then your counter must be zero.
and its good to be on stock rom as there are mods for it and even a very good call recording.what do you want more than this?????

[Q] After flashing ROM, processes stop

Help.
I use odin to flash the ICS ROM. After reboot, the screen started but as it proceeds I have many of the processes (if not all) indicating stop. I try to use Gingerbread ROM, but I am facing the same problem.
Can anyone advise

kimboon said:
Help.
I use odin to flash the ICS ROM. After reboot, the screen started but as it proceeds I have many of the processes (if not all) indicating stop. I try to use Gingerbread ROM, but I am facing the same problem.
Can anyone advise
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1373728

do a full wipe of data if u are on gb rom.. otherwise if u are on ics then flash a safe kernel then do a full wipe
Sent from my GT-N7000 using Tapatalk 2

abhinav quietly brilliant said:
do a full wipe of data if u are on gb rom.. otherwise if u are on ics then flash a safe kernel then do a full wipe
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks,
How can I get the kernel. I have the abyss which iused by CWM but with odin, not sure if I can used the zip version. So far many post talk about ROM, little about the other. Can ypu point me to the link to get the kernel.
Many thanks

kimboon said:
Thanks,
How can I get the kernel. I have the abyss which iused by CWM but with odin, not sure if I can used the zip version. So far many post talk about ROM, little about the other. Can ypu point me to the link to get the kernel.
Many thanks
Click to expand...
Click to collapse
Here
P.S. U can use Mobile Odin to flash the .zip version of the kernel..

shyamub4u said:
Here
P.S. U can use Mobile Odin to flash the .zip version of the kernel..
Click to expand...
Click to collapse
Hi Thanks,
But as my Note cannot even move after animation, at the start point as it load the process, the processes stop, and after a while reload the process but fail. Then after a period reboot. I cannot use mobile odin as I cannot even get to the UI. Any suggestion.
I also realised the newer ROMs come with all the stuff in one package(kernel, modem, csc).

kimboon said:
Hi Thanks,
But as my Note cannot even move after animation, at the start point as it load the process, the processes stop, and after a while reload the process but fail. Then after a period reboot. I cannot use mobile odin as I cannot even get to the UI. Any suggestion.
I also realised the newer ROMs come with all the stuff in one package(kernel, modem, csc).
Click to expand...
Click to collapse
if you cannot do anything.. then flash a gingerbread rom using pc odin.. then let the phone to boot up.. after completely booting up switch off your phone then reboot it holding up volume key+home button.. then you enter into recovery and there you can clear the data.. now restart your note then you have a gud working note with gb rom
Sent from my GT-N7000 using Tapatalk 2

kimboon said:
Hi Thanks,
But as my Note cannot even move after animation, at the start point as it load the process, the processes stop, and after a while reload the process but fail. Then after a period reboot. I cannot use mobile odin as I cannot even get to the UI. Any suggestion.
I also realised the newer ROMs come with all the stuff in one package(kernel, modem, csc).
Click to expand...
Click to collapse
Do a clean install..use this guide & flash Ginger bread using PC Odin..then u can flash any rom of your choice..

shyamub4u said:
Do a clean install..use this guide & flash Ginger bread using PC Odin..then u can flash any rom of your choice..
Click to expand...
Click to collapse
abhinav quietly brilliant said:
if you cannot do anything.. then flash a gingerbread rom using pc odin.. then let the phone to boot up.. after completely booting up switch off your phone then reboot it holding up volume key+home button.. then you enter into recovery and there you can clear the data.. now restart your note then you have a gud working note with gb rom
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Many Thanks.
I did use the GB via Odin - which is the first thing I did, the flash was successful. But when reboot, all the loading processes came up as stop.
I thanks all your suggestions.

is the phone working fine.

shyamub4u said:
U can use Mobile Odin to flash the .zip version of the kernel..
Click to expand...
Click to collapse
You are advising the OP to use Mobile Odin on unrooted stock Rom? Oh, dear....
Sent from Nexus 7

chasmodo said:
You are advising the OP to use Mobile Odin on unrooted stock Rom? Oh, dear....
Sent from Nexus 7
Click to expand...
Click to collapse
Oops..just wanted to tell him that one can flash .zip versions of kernels through Mobile Odin & forgot that he is coming from stock..unrooted

Many Thanks. I finally send to service center to flash. Could not get the processes to behave.

kimboon said:
Many Thanks.
I did use the GB via Odin - which is the first thing I did, the flash was successful. But when reboot, all the loading processes came up as stop.
I thanks all your suggestions.
Click to expand...
Click to collapse
i guess all needed to be done was a factory reset / wipe data on GB and the phone would have booted up

Samsung Galaxy Mini 2 6500D Bootloop

I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.

digitz_ said:
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
Click to expand...
Click to collapse
connect your phone to the computer
go into donwload mode
start odin
flash http://www.hotfile.com/dl/176669754/95e7a92/S6500DXXLD3_S6500DPROLD1_PRO.zip.html

RoSinner said:
connect your phone to the computer
go into donwload mode
start odin
flash
Click to expand...
Click to collapse
Nope, still same thing.

digitz_ said:
Nope, still same thing.
Click to expand...
Click to collapse
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong

RoSinner said:
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
Click to expand...
Click to collapse
What can I do wrong? I putted MD5 in PDA and flashed.

I tried to flash CWM and diffirent firmwares but no luck.

digitz_ said:
What can I do wrong? I putted MD5 in PDA and flashed.
Click to expand...
Click to collapse
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium

Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I was flashing before like this, everything was fine. There must be a way to fix this.

Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.

Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
nah we can flash one package with pda

How did you fix it?
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?

Here: http://forum.xda-developers.com/showthread.php?t=1853159

bro .. use odin
first switch to download mode then connect ur mob with pc , then use odin and update it with original pda ..

digitz_ said:
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
How did you do it, I cannot install adb drivers for some reason, I went back from CM10.1 to stock but now it just keeps repeating boot animation. Please help.

tom1890 said:
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Click to expand...
Click to collapse
Hi, I had exactly the same problem, flashed the stock firmwire but it gets stuck on samsung logo, flashed few CWMs but nothing. I really didn't know what to do, then my battery became critical so i connected it to the pc and let it charge. While charging, I tried to acces the CWM recovery (home+volume up+volume down + power) and BAM! It opened recovery, I deleted all user data, cache and factory reset, rebooted and it worked.

Try to flash stock rom

Flashing stock rom didn't work.
Sent from my GT-S6500D using Tapatalk 2

digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
how did you fix this? i have exactly the same issue.

polys643 said:
how did you fix this? i have exactly the same issue.
Click to expand...
Click to collapse
Hi All,
I was struggle with bootloop issue for 3 days. I got my problem when I forgot to wipe phone returning ROM 10.2 to stock rom. Before I didn’t have any problems with getting to recovery mode but after I was not able to get to CWM. Also did try (vol+) (vol-) (home) hold while odin reset all I get RUMDAMP ARM9. Same when trying to hold recovery combination while normal boot. I have no problems with getting to Download mode.
Phone show Samsung animation and then vibrate once, pause, vibrate twice.
What work for me.
Recovery Combination = (vol+) + (vol-) + (home) + (pwr)
1. With odin 3.04 (don know if version matters I hade SS_DL.dll in same folder as odin) I install cwm-6.0.3.3-b2-jena.tar.md5
2. It restarted and get boot loop again
3. When I hold recovery combination phone didn’t boot. But what did I remove battery plug it again. Press (pwr) and immediately (maybe 0.5 sec) I hold rest of the recovery combination. Phone boot and show me logo so I release the buttons. To my surprise I did boot to CWM. (don’t know way but I didn’t do wipe immediately but I restart did try it again to be sure if this works – and it did, at least for me)
Rest was easy (WIPE Factory Reset, Cache, Dalvik Cache and just in case fix permission) restart and did boot to Stock ROM. For some unknown reason now I can normally CWM just buy holding combination and releasing as soon as Samsung logo show up.
I hope this will help somebody.
Now im using CM 10.1 07/07
My phone is S6500D no NFC
Cheers,
Maciej

digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
pleeees tell me how u fix it my phone hase the same proplem u had can u

I have heavy problems, please help (topics: phone stuck and triangle)

I have problems that i cant solve by self. So please some help.
FYI, I use custom ROM from samfirmware JB 4.1.2 XXLT6. and philz kernel 5.06.1
the problems:
1. A big problem is my phone is stuct at opening window "Samsung Galaxy Note GT-N7000" and cant even enable to use. I dont know why this happened, it just happened after i pulled the battery out for insert new SIM card. So, what I have to do now?
2. Because of a problem no.#1 happened, I was frustrated and install kernel from odin pc (with tar), i forgot it will show triangle after installing. It was really frustrated. It should be install from recovery with .zip. So that, how can i put away that triangle with bad condition of my note right now.
Please, please.. helm me out this problems.

U mean stock rom from samfirmware? Reflash the rom again and after that go straight to recovery and wipe factory data reset yr phone should bootup ok and the triangle will be gone but yr flash counter in download mode will not be zero.

ndmuni said:
U mean stock rom from samfirmware? Reflash the rom again and after that go straight to recovery and wipe factory data reset yr phone should bootup ok and the triangle will be gone but yr flash counter in download mode will not be zero.
Click to expand...
Click to collapse
yap I meant stock rom.
hmm
how about solving the problem #1?

teukubahran said:
yap I meant stock rom.
hmm
how about solving the problem #1?
Click to expand...
Click to collapse
Are you sure you used the correct Philz kernel?
Sent from my GT-N7000 using xda premium

teukubahran said:
yap I meant stock rom.
hmm
how about solving the problem #1?
Click to expand...
Click to collapse
Incidentally, I solved a somewhat similar problem today. Can you boot into recovery by any chance?