Related
I made another thread asking about a problem I was having with Odin not recognizing my captivate, but with no solution there I have decided to try and install froyo a different way. It looks like the froyo guide that nbs11 wrote will work for me a lot easier than odin. I am just about to attempt it, but I have a major concern:
With odin not being able to recognize my phone at all when it is in download mode, what would happen if my phone were to become bricked? Is odin the only way to fix it then? I would not want to brick it and then have a program that will never recognize it...
,thanks
I would recommend not flashing froyo until you work out the odin problem. You will be fine the first time you flash most likely but will essentially be stuck with that one rom. Most roms will throw crazy errors and fcs if you don't go back to stock before flashing.
Also if you happen to brick your phone you will be stuck without odin. It might be tempting to flash a rom but there will be no way to go back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
I was afraid of this... Do you know of any other way to flash back to stock without odin? I spent 6 hours trying to get it to work yesterday with no luck...
Oh wait! I would be using clockwork and RomManager in order to flash the phone to Froyo.... Does that mean when I am on Froyo I could use the same procedure to flash back to an older firmware all without the use of Odin?
That's^ exactly what I did, I used Rom Manager (clockwork, they're one and the same) to flash the recovery, backed up the stock Eclair and flashed Axura Froyo.
I also used Titanium to back up all my apps and restore them after switching to Axura. No Odin at all.
Had this phone short of a month. I'm trying to figure out how to flash Odin now.
gunmetaldroid said:
That's^ exactly what I did, I used Rom Manager (clockwork, they're one and the same) to flash the recovery, backed up the stock Eclair and flashed Axura Froyo.
I also used Titanium to back up all my apps and restore them after switching to Axura. No Odin at all.
Had this phone short of a month. I'm trying to figure out how to flash Odin now.
Click to expand...
Click to collapse
So you can confirm that it would be completely possible to flash back to Eclair with just clockwork? If so, it might be worth doing. Well, as long as I don't get bricked... That, im sure, would require odin
totally not worth the risk. figure out ODIN first, or we will be seeing a post in a few weeks from you screaming about bricking your phone.....
Pirateghost said:
totally not worth the risk. figure out ODIN first, or we will be seeing a post in a few weeks from you screaming about bricking your phone.....
Click to expand...
Click to collapse
Thats the thing though... I see no way to get odin to work with my phone. I have tried every thing that I know of.
*sigh* guess Ill have to wait for the official froyo update then...
I prettu much figured out how to recover using Odin, but before my question is now that I've rooted and applied a custom firmware, will using Odin now wipe all of my user data, root and rom?
Thanks.
I think i get it now, Odin IS a way to recover the stock firmware, it's not like clockwork where you backup your original and custom firmware and switch between them.
The fact that I was able to flash a custom firmware without bricking my phone sort of negates the need for me to use Odin.
I took that risk and it worked fine. Now for the OP, it's better to find out that you do have that option of reverting back to stock in case you brick in the middle of flashing. Therein comes the problem that Odin doesn't recognize your phone, hence the hesitation to flash.
I guess it's really up to you if you want to do it anyway without Odin...
I see no reason to risk it... I spent too much money on this thing to brick it without a way to fix it
Sent from my SAMSUNG-SGH-I897 using XDA App
yentlequible said:
I see no reason to risk it... I spent too much money on this thing to brick it without a way to fix it
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Don't you have warranty on it? well everything that goes flashing is always a risk if your going back to stock im prefer using the "odin stock with 3 button combo", it flashes the sbl.bin first which is the 3 button combo in cases it hangs up somewhere you can always unplug the usb then go to download mode again. In cases there is also a "homemade test jig" that can help you go to download mode. The benifits you get from flashing is a lot you can use your phone full potential. Correct me if im wrong as long as you can start your phone with a display you can always fix it. I would suggest to read all those with quote and theres also "ADB" which can help in some cases. just keep in mind before flashing make sure that the 3 button combo is intact first.
Nope, I have no warranty on this... I have t-mobile but didn't want the vibrant because I would need to pay the extra money for a data plan on it. With the captivate, I bypassed the requirement for the plan when I unlocked it.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ok time to re appear in this thread again. I have had a decent amount of flashing experience and want to make sure the right info us being shared.
Once again you can flash to any rom you want a couple of times.however after a few you are not found to be able to do it because what is going on in the phone of more complicated then you see on the phone. Most roms change the kernels and hardware software interaction. This can cause conflict resulting in fcs and excessive battery drain.
With all that being said I would still advise you to jump the bucket as king a you get odin to work. As long as you can figure that out you are golden. Once you have the hand of it you can flash to stock and to a rom in your sleep. I have managed to do it while on the highway.
Sent from my SAMSUNG-SGH-I897 using XDA App
A) You didn't install the driver (or the wrong driver)
B) You don't know what Download Mode is
C) Your phone is broken
D) You need to use a different USB port
Those are the ones that come to mind.
Alternatively, you could give Heimdall a try.
MikeyMike01 said:
A) You didn't install the driver (or the wrong driver)
B) You don't know what Download Mode is
C) Your phone is broken
D) You need to use a different USB port
Those are the ones that come to mind.
Alternatively, you could give Heimdall a try.
Click to expand...
Click to collapse
A) The drivers should be right, I downloaded them twice
B) I know exactly how to get to download mode.
C) Most likely
D) I Tried on 3 separate computers with different USB
Let me know if you have any other suggestions, I have tried everything.
What is Heimdall? Might be worth a shot...
Only idea i have is to pull your battery sim and sd card for a minut or two then flash odin with only your battery in.
Sent from my SAMSUNG-SGH-I897 using XDA App
I bricked my phone with an i9000 firmware. Since I was unlucky enough to have a phone without the 3 button combo, I was screwed.
Now, IF I decide to flash my new phone again, i'll make sure to put together the homemade jig which can put the phone into download mode without the phone needing to be able to do it itself.
crystalhand said:
Only idea i have is to pull your battery sim and sd card for a minut or two then flash odin with only your battery in.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That is what I have been doing actually... I take everything out and enter download mode with just the battery in the phone
Sent from my SAMSUNG-SGH-I897 using XDA App
Moved to Q&A.
Ok i know and have seen that there are many experienced users in this forum, so i give you this!!Pls help sum1!!!
I think i bricked my fone, tried to get cwm 3 on it, then while rebooting, it wont reboot. went into download mode with odin (3 button fix) (i have done this 9-10 times before, not a noob to this), selected pit and tar and hit start. odin stuck on factoryfs and fully orange screen on fone. removed battery, fone, usb, odin restart, tried again, yellow screen. again. red screen. now got frustrated. tried normal odin(not the 3 button fix), again yellow screen.took out battery to try again, but fone wont start/go in dl/recvry mode anymore. tried on 2 different comps with xp/win7. no go.
SCREWED??
BTW, i ordered a jig.should arrive by end of week.
It'll be fine after you get your jig.
Sent from my SAMSUNG-SGH-I897
same thing happened to me...but i just got it replaced..as there was no way i could wake it up...but try Jig..or just get it replaced...every captivate is under warranty...tell them u were doing official Froyo update and lost electricity or something....
yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????
Its a semi uncommon problem.I have had the random colored screens before and had to pull battery. Managed to get odin to work after a couple of times
Sent from my SAMSUNG-SGH-I897 using XDA App
psycho2097 said:
yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????
Click to expand...
Click to collapse
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom
viny2cool said:
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom
Click to expand...
Click to collapse
YEA, I THOT SO 2... JUZ WANTED 2 VERIFY, WAT ABOUT WEN CHANGING ROMS?do i need to flash to stock every time, or can i just take a backup f froyo stock using cwm?(sorry 4 the caps...)
Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App
viny2cool said:
Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
If u flash any zip from stock froyo it gives you sign verification error. So u need to fix that a nd than just flash custom rom as u normally do
Sent from my SGH-I897 using XDA Premium App
Crash N Burn....Owch!
psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-
Liv33viL said:
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-
Click to expand...
Click to collapse
inncidentally i did do a couple of nandroids before "all the **** hit the fan". and i could use it to restore. but how? my fone simply wont turn on, neither go in2 recv/ dl. so how 2 restore???????
all 2.2 have 3e recovery, custom roms built on 2.2 come pre cracked.
here is the 3e recovery fix. http://forum.xda-developers.com/showthread.php?t=909213
it works on all 2.2 stocks with 3e.
if you are rooted using "one click root 1.7" (NOT ODIN ONE CLICK!!!) you dont need adb commands just root explorer to mount and replace file. or use adb to mount and push file. the instructions in the thread have the 2 methods mixed together.
no offence but ignore Liv33viL on this one
Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
Dude, that's just plain wrong. Let each person decide on their own who's advice to take and who's to ignore. It's an open forum and we all have the right to share our knowledge and experience. The focus here should be helping people get the assistance they need, not to diminish someone's credibility based on a personal opinion.
In short, grow up.
Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
ok, but then do u mean my bootloader is not damaged? can it be still repaired by using jig? can i restore nandroid?? but how 2 do so since my fone wont turn on at all?
What happens when you do turn it on- nothing? Or does it hang on the boot screen?
Sent from my SAMSUNG-SGH-I896 using XDA App
I had the very same problem. Your bootloater is boogered up now. I sent mine to an xda member and he fixed it.
Even with a jig I wasn't able to do anything. My phone would go into d/l mode with it but that was all it would do.
I paid $50 to have mine fixed which in my opinion is well worth it. That doesn't include shipping costs. I had connexion2005 fix it for me. He a great guy and does very fast work. It beats buying a new phone.
Hope this helps.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
All shameless advertising aside, it's worth trying a fix where others give up and pay someone. Through the process of elimination we can determine if you need professional help lol!
Sent from my SAMSUNG-SGH-I896 using XDA App
Thanks guys..will try connexion when the jig fails.
Sent from my SAMSUNG-SGH-I897 using XDA App
N does anybody know what to do, as my newly arrived cappy has a distinctive yellow tint to the screen. Do I call samsung and ask for a new one? Or is there some method to fix it by software?
Sent from my SAMSUNG-SGH-I897 using XDA App
Hey guys I need to send my phone back for warranty replacement and I am afraid to use Odin one click, because I know it bricked a friends phone recently beyond even JIG repair. His was an 11.02 or something and mine is a 10.07.
All I have flashed is DG's Cognition if that helps.
What should I do to go back to factory stock, will oneclick kill mine like his?
I cant afford to brick this one so I just need some confirmation, thanks guys.
Odin back to stock is the preferred method. While there is risk of brick, it generally doesn't happen that often. I have used it countless times.
But Odin will bring you back to stock and wipe any evidence from having a custom ROM.
http://www.megaupload.com/?d=SBSMALFJ
*Also, you could always say you were trying to update via kies and it stopped working (if anything went wrong) They won't ever know and it'll just get flashed stock firmware once they get ahold of it anyway.
I believe you can flash back to stock using OdinOneClick. But just to be sure you can flash this package instead
--> http://forum.xda-developers.com/showthread.php?t=995143
That package flashes everything but the two bootloaders and param.lfs. Meaning if anything goes wrong you still can use the combos or a jig to get back into download mode .
Just to double check you use:
Vol up, Vol down & power key to get into recovery mode?
&
Vol up, Vol down & usb cable to get into download mode?
It doesn't matter at all if you brick it. You're sending it in for a warranty replacement already. If odin one click bricks it tell them some bs about kies doing it.
studacris said:
It doesn't matter at all if you brick it. You're sending it in for a warranty replacement already. If odin one click bricks it tell them some bs about kies doing it.
Click to expand...
Click to collapse
+1
10 char
Sent from my SGH-I897 using XDA Premium App
Another thread for a question easily answered by doing a search first.
Miami_Son said:
Another thread for a question easily answered by doing a search first.
Click to expand...
Click to collapse
Is it really necessary to post a useless post, with no information?
You really think I didn't search these insanely complicated and deep forums?
A friend of mine just ended up with a hard brick after using odinoneclick.
Something about a later build phone. But nobody seems to know much about this issue.
So needless to say I would like to be a bit cautious now.
brannutz said:
Is it really necessary to post a useless post, with no information?
You really think I didn't search these insanely complicated and deep forums?
A friend of mine just ended up with a hard brick after using odinoneclick.
Something about a later build phone. But nobody seems to know much about this issue.
So needless to say I would like to be a bit cautious now.
Click to expand...
Click to collapse
About as necessary as you starting a new thread for a common issue instead of posting to an existing related thread. And the problem with later build phones (1008 and up) is also well documented in here. Be cautious all you want, but respect the forum by not starting redundant threads.
brannutz said:
Hey guys I need to send my phone back for warranty replacement and I am afraid to use Odin one click, because I know it bricked a friends phone recently beyond even JIG repair. His was an 11.02 or something and mine is a 10.07.
All I have flashed is DG's Cognition if that helps.
What should I do to go back to factory stock, will oneclick kill mine like his?
I cant afford to brick this one so I just need some confirmation, thanks guys.
Click to expand...
Click to collapse
Mine is a 10. 07 and I have flashed to stock with one click plenty of times
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
brannutz said:
Hey guys I need to send my phone back for warranty replacement and I am afraid to use Odin one click, because I know it bricked a friends phone recently beyond even JIG repair. His was an 11.02 or something and mine is a 10.07.
All I have flashed is DG's Cognition if that helps.
What should I do to go back to factory stock, will oneclick kill mine like his?
I cant afford to brick this one so I just need some confirmation, thanks guys.
Click to expand...
Click to collapse
Im trying to get back to stock from GB. Mine is 10.06, OdinOneClick (with 2 bootloaders) wont work, odin3 works but I cant find a stock rom with those 2 bootloaders.
I could tell you to use odin3, but I cant link you a stock rom with 2 bootloader.
xisque said:
Im trying to get back to stock from GB. Mine is 10.06, OdinOneClick (with 2 bootloaders) wont work, odin3 works but I cant find a stock rom with those 2 bootloaders.
I could tell you to use odin3, but I cant link you a stock rom with 2 bootloader.
Click to expand...
Click to collapse
Have you tried the one click from designgears thread it is in development... If you can that is your best bet... You might want to try that
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
leezrd said:
Have you tried the one click from designgears thread it is in development... If you can that is your best bet... You might want to try that
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I tried this one:
http://forum.xda-developers.com/showthread.php?t=731989
xisque said:
I tried this one:
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
And still nothing?
Sent from my SGH-I897 using XDA Premium App
is there a way to go back to stock compleately?
I used odin and it brings it back to stock software, but what about the data on the phones internal memory all that stuff is still there. Like pictures, music, titanium backup files, etc.
Can the internal memory be formated?
Coreym said:
And still nothing?
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
OneClickOdin doesnt work with my phone as I posted before.
usSiR said:
is there a way to go back to stock compleately?
I used odin and it brings it back to stock software, but what about the data on the phones internal memory all that stuff is still there. Like pictures, music, titanium backup files, etc.
Can the internal memory be formated?
Click to expand...
Click to collapse
Yes, search for master clear.
usSiR said:
is there a way to go back to stock compleately?
I used odin and it brings it back to stock software, but what about the data on the phones internal memory all that stuff is still there. Like pictures, music, titanium backup files, etc.
Can the internal memory be formated?
Click to expand...
Click to collapse
Or dial *2767*3855# were you dial numbers (dialer) because master clear with odin lags and hang up sometimes
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Coreym said:
And still nothing?
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
rwaarrrrrrrrr!!!
I got a new computer and new cable and now odin 1 click is working good!
Odin and Windows 7
Just an FYI for all Windows 7 user about Odin3 (oneclick or otherwise) in general. Use Windows XP service pack 2 compatibly mode to make this run without getting locked up as often.
Sigh, i really regret ever getting involved in this rooting business Basically, in installed a stock 2.1 rom, and now i can't get into Download mode any more. I tried using Keis, hoping that maybe i could get back to 2.3 that way, but it's not recognising my hone any more. Can anyone offer me any help here?
OK first and foremost all is not lost. Losing download mode is a common issue with many Eclair stock ROMs.
What you need is a download mode USB jig which can be bought for cheap on eBay. This will let you get into download mode whenever you get stuck in these situations.
Another option is to download an App like SGS toolbox. I haven't used that program in a while (basically haven't since I bought a jig), but I believe that particular program allows you to "reboot into download mode" too...
Sent from my MB860 using xda premium
buy a usb jig and try it
To be fair, that shouldn't be possible at all unless if you messed up the bootloader. Which rom did you flash, and where did you get it from?
snapper.fishes said:
To be fair, that shouldn't be possible at all unless if you messed up the bootloader. Which rom did you flash, and where did you get it from?
Click to expand...
Click to collapse
Like I said earlier, I've personally have flashed a stock Eclair ROM before on a i9000m and a i9000t and lost the option for download mode. IDK know why, but it was definitely gone.
Got download mode back by the jig and a Froyo stock rom. It may not make "sense" but besides my experience I've seen others talk about the same issues on Stock Eclair and not being able to get into Download Mode...
Sent from my MB860 using xda premium
Hello all,
I have a GTab 8.9 from AT&T. I performed the ICS upgrade last night using Kies and it seemed to load correctly with no errors however the touch screen does not work now. It boots up fine but I cannot do anything with the screen. Power and volume buttons seem to be working fine.
I was able to reboot the device by holding the power button in and then go into download mode and do a factory reset. That went with no errors but the touch screen still does not work.
So, next I thought I would use Odin and try to push the factory rom back to it however Odin never sees the device, (tried multiple usb ports and 2 different pc's Win7 32b and 64b) However if I go ahead and let the GTab boot on up Odin does see it at that point. I can also get to the internal sdcard via my computer.
I also tried to copy the 7300_cwmr files to the sdcard and rebooted back to download mode. I selected apply update from sdcard and went into each of the directories but the device does not see any files in the directories, just the directories themselves.
So.... at this point I'm at a loss what to try next and I'm hoping someone on this forum can give me a nudge in the right direction.
I did reinstall the usb driver
Odin sucessfully recognized this device in download mode 'before' the ICS upgdate, not after.
I am using the factory usb cable and I did try a second one.
I was running version 3.2 before the upgrade.
Not ever rooted
Kies recognizes the device as well, can kies be used to flash my device? (sorry if that's a stupid question)
Thanks ahead
Are you sure you're in download mode, not recovery, when you try Odin. If kies recognizes the device I can't believe Odin won't.
Is the stock rom file you're trying to flash a zip file or a .tar.md5? The recovery is looking for a zip file and that may be why you didn't see it in any folder. Odin uses the tar file.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Thanks for the reply.
Yes I am in download mode. As I mentioned, Odin was able to see my GT before I upgraded to ICS, but not after. At least not in DL mode. If I let the GT go ahead and boot up Odin recognizes it with the port showing up in it's normal amber color.
It boots up fine, the touch screen is not working though so I can't use the GT. Once it boots up I can see it in my computer and place files on on it.
Thanks
Have you tried fixing permissions when you're in recovery mode? Do you have a custom recovery installed our the stock recovery, and if custom which one?
Sent from my SGH-I727 using xda app-developers app
I apologize, I'm not sure what you mean by fixing permissions while in recovery mode. I do not see that option on the screen. Everything is factory on the GT. I have not installed a custom recovery. The only change to the device from stock was the ICS upgrade that I just performed via Kies.
Is there a way that I can recover the device back to 3.2 using either Kies or while in DL/recovery mode? When the device boots I can see it and add files via my computer. Can I place the stock rom that I have downloaded from sammobile on the devices sdcard and reboot into DL mode and do a restore from sdcard? Is there a different way to do this without Odin?
Odin... I am not sure why it is not recognizing it while in DL mode. Odin will recognize it after the device boots. Actually Odin recognizes it just after the "Samsung" logo displays... while the AT&T "Rethink Possible" startup video is playing Odin will see it at that point. Not before. Quite frustrating actually. (I have tried multiple pc's and usb ports)
Thanks again for the help and apologies if I am asking stupid questions.
With the device off, hold down the power and both volume keys. When you see the Samsung logo release the power key but continue to hold down the volume keys for 2 seconds then release them. That should get you into down load mode. It'll say something about pressing the volume up key to continue. Have Odin running and then plug on the usb cable. Have you done something like that?
Sent from my SGH-I727 using xda app-developers app
ok... so I found an old "XP" laptop here at my office and downloaded the usb driver and Odin again and wnet into DL mode and for whatever reason Odin sees it on the XP machine. (whatever) grrr
Anyway... I downloaded and tried pushing both of the roms I found on sammobile.com for AT&T ( i957UCKJ7 and i957UCLK4) to my GT8.9, both times they completed successfully and when rebooting the touch screen would not work.
Is the rom still available for 3.2? Can I revert back to what came with it when it was originally released?
Thanks again for the assistance.
It sounds like you have a bigger problem than putting the stock Rom on it is going to fix. If you're still under warranty I'd take it in.
Sent from my SGH-I727 using xda app-developers app
Yeah I called them up and can toss it back at them, which I will do if I cant find an original factory rom to try and push to it.
I'm still searching for one though I have not been able to find one yet. Can anyone point me to a factory rom for this device?
I'd like to try and flash it back to stock before I send it back to them (if possible) as the touch screen was working just fine before I pushed out the update via kies the other day. Once the update finished and it rebooted, the touch screen did not work after that.
Thanks!
Go to sammobile.com for the stock roms. You'll have to sign-up but it's free.
Sent from my SGH-I727 using xda app-developers app
Yeah I've been to that site, that's where I got the 2 I mentioned above (i957UCKJ7 and i957UCLK4). I believe the UCLK4 file is ICS, correct? I'm not sure what version the UCKJ7 file is. I did try both. Those were the only 2 roms I could find there for the 8.9 ATT GT. I'll go back and look again. Maybe I missed it.
Thanks for your help
I'm sure those are the only two. The other one is honeycomb. They are the official Samsung roms. I think you've done what you can.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
This is the second reported occurrence of this happening. Weird
Sent from my SAMSUNG-SGH-I727 using xda premium
orlandoxpolice said:
This is the second reported occurrence of this happening. Weird
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Make that three ?? .. any resolution so far ?
orlandoxpolice said:
This is the second reported occurrence of this happening. Weird
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Yea, noticed that too. I used the rom from Sammy but didn't have an issue. I wonder if they got the wrong tab version.
OP, can you post what rom you flashed? And do you have an i957?
Sent from my SAMSUNG-SGH-I957
---------- Post added at 07:43 PM ---------- Previous post was at 07:23 PM ----------
wamaOnline said:
Make that three ?? .. any resolution so far ?
Click to expand...
Click to collapse
You're the second. Weird that a couple of you have had the same problem.
Sent from my SAMSUNG-SGH-I957
Regretfully my tab is not under warranty, and I don't know what to try next? Do you have any ideas
In a small way I'm glad to see that others are experiencing this also.
I wonder if anyone out there has a completely stock rom or knows where I can pick one up? I have tried the 2 over at sammobile and neither brought my touch screen back. I have searched and searched online and can't find anything.
I was reading on a different site while researching this issue and he said he reverted back to his original factory image and the touch screen functionality came back. I'd really just like to get my GT back up and running somehow until this ICS touch screen problem gets figured out.
Thanks ahead for any help.
Sammobile is the stock roms. Use the oldest one, honeycomb. The download is a zip file. To use Odin you'll need to extract the .tar.md5 file out of the zip. Use 7-zip to do that.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Yeah I've tried both of the roms on sammobile. Didn't work.
Well, thanks very much for the help. I'll keep checking here through tomorrow to see if anyone else has a suggestion to try and if not I will just mail it back to Samsing on Monday. I hate doing that because I need it for a trip on the 15th. Grrr
Very frustrating.
EraserX33 said:
Yeah I've tried both of the roms on sammobile. Didn't work.
Well, thanks very much for the help. I'll keep checking here through tomorrow to see if anyone else has a suggestion to try and if not I will just mail it back to Samsing on Monday. I hate doing that because I need it for a trip on the 15th. Grrr
Very frustrating.
Click to expand...
Click to collapse
Any updates ? A question, did you try to use a non ATT card ?
Sent from my A500 using xda app-developers app
---------- Post added at 01:50 AM ---------- Previous post was at 01:43 AM ----------
EraserX33 said:
Yeah I've tried both of the roms on sammobile. Didn't work.
Well, thanks very much for the help. I'll keep checking here through tomorrow to see if anyone else has a suggestion to try and if not I will just mail it back to Samsing on Monday. I hate doing that because I need it for a trip on the 15th. Grrr
Very frustrating.
Click to expand...
Click to collapse
One more thing , can you please tell us where did you get your tablet from ? In case it is a he issue from the seller
Sent from my A500 using xda app-developers app