Database Develop

[Q]Should I use CWM or odin to flash 4.0rom like romow?

I know this is a very stupid question but I just want to make sure flashing with CWM is viable.
For the leaked stock ics 4.0 rom I know I should use odin to flash, but how about custom 4.0 rom like Romow? Should I use CWM to flash the zip file?
Thx~
ps: I am currently running rocketrom v19 with CWM

use CWM n flash zip
Sent from my GT-N7000 using xda premium

You should read in the post how must it be done, you should start in annual kernel 3.9 then install chainfire.repack and so on
Sent from my GT-N7000 using xda premium

There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Also, some ppl claimed that I need to first flash the stock leaked 4.0 rom then have my phone rooted with CWM installed and finally flash custom 4.0 rom with CWM. Is that really necessary?
Sent from my GT-N7000 using XDA App

kelvin fong said:
There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
There are better roms now than ROMOW's one i think, try flashing Rocket Rom, or the new AOSP

From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?

kelvin fong said:
From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?
Click to expand...
Click to collapse
Yes youre right, there is a problem with root a cwm in ics, and you need to da that
Follow carefully the instructiones if not you wont hace fullroot

PROBLEMS!
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?

brooon said:
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?
Click to expand...
Click to collapse
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....

kelvin fong said:
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....
Click to expand...
Click to collapse
Yes, I came directly from GB!

If you can load the boot animation that means ur phone is not bricked. You should try to download a stock gingerbread rom from dr ketan's post and flash it by odin pc.
Sent from my GT-N7000 using XDA App

When going back to GB, i kinda 'restart' the whole process by going back to Stock ROM via Odin, and redo the root and CWM.
Else, there are strange quirky issue ex. CWM just hangs while wiping the phone.

Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
dr.ketan said:
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.
Click to expand...
Click to collapse
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training

brooon said:
Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training
Click to expand...
Click to collapse
Should be this one(http://forum.xda-developers.com/showthread.php?t=1424997).
Firstly, download one of the roms from [Older ROMs (Directly Rootable)].
Secondly, follow the [Installation Guide For Older ROM ], the one using odin pc.
You may see below another flashing method using mobile odin, but that doesn't suit you since that one requires your phone rooted before and will keep your root after flashing. The one with odin pc will wipe out all your data and apps(of course not your SD card) and also unroot your phone. That means your CWM and root will all be gone and you have to follow another post to root it again(now this one:http://forum.xda-developers.com/showthread.php?t=1329360)
this one(http://forum.xda-developers.com/showthread.php?t=1424997)teaches you how to flash a rootable gingerbread rom, but not rooted. This one(http://forum.xda-developers.com/showthread.php?t=1329360)shows you how to root your phone and install CWM. I think these two posts are the best tutorials you are looking for.

I think you should download this >>http://forum.xda-developers.com/attachment.php?attachmentid=907734&d=1329574136
This one is better organized.

Thanks mate! Saved it to my desktop...but finally i was able to manage the problem by simply flashing a *fresh* RocketRom again (?!). I thought it would be worth a try...
Anyway: Thank you very much for your support, it´s good to still meet that friendly kind of people with patience here on the board (it´s getting less these days) hope i´ll be able to return the favor in future

You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.

kelvin fong said:
You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.
Click to expand...
Click to collapse
As far as I remember I made my very first steps with odin after I reveived my note (root, cwm)...rocket has been flashed by using cwm. But yes, my binary counter increased definitely...
...I do have a USB Jig, but in some was I am kind of afraid of going trough this! To fumble around in pure darkness...hmmm i don´t know
Have you tried it yourself?

Actually I've got a yellow triangle together with increased binary counter as I followed another tutorial guide(I should follow dr ketan's guide before).
I think removing the counter with a jig is way too dangerous for me so I don't want to risk it. Simply remove the counter only when you really need to bring your phone to samsung because maybe you don't even have to claim the warranty at all.

[Q] Installing CWM on Galaxy POP GT S 5570

My friend want to upgrade his phone,
and asking me to do so.
I know few things and not a noob but also not a dev or a pro.
Thus i want to ask a question:
He is having an unrooted Galaxy POP GT S 5570 with stock 2.2 froyo
Question is that
Can i directly flash CWM recovery 4.0.0.5 using odin
that is just flashing tass.ops and tass-recovery-cwm.tar ???
Because somewhere i read that CWM requires GingerBread on GT S 5570 to work?
And i know that it is very difficult to unbrick for users like me and sometimes impossible for noobs.
I'm having Xperia X8
And sony ericcson devices are very easy to unbrick using official SONY UPDATE SERVICE SOFTWARE.
If there is something like the above one, for SAMSUNG,
Please tell me?
I tried to OC his phone once and phone strucked in bootloops.
Then somehow I managed to install Stock Firmware of Galaxy MINI
Then we go to the CUSTOMER Care and asked them to reinstall the firmware
And again he is on stock 2.2 only.

vinmac said:
My friend want to upgrade his phone,
and asking me to do so.
I know few things and not a noob but also not a dev or a pro.
Thus i want to ask a question:
He is having an unrooted Galaxy POP GT S 5570 with stock 2.2 froyo
Question is that
Can i directly flash CWM recovery 4.0.0.5 using odin
that is just flashing tass.ops and tass-recovery-cwm.tar ???
Because somewhere i read that CWM requires GingerBread on GT S 5570 to work?
And i know that it is very difficult to unbrick for users like me and sometimes impossible for noobs.
I'm having Xperia X8
And sony ericcson devices are very easy to unbrick using official SONY UPDATE SERVICE SOFTWARE.
If there is something like the above one, for SAMSUNG,
Please tell me?
I tried to OC his phone once and phone strucked in bootloops.
Then somehow I managed to install Stock Firmware of Galaxy MINI
Then we go to the CUSTOMER Care and asked them to reinstall the firmware
And again he is on stock 2.2 only.
Click to expand...
Click to collapse
well, I think cwm 4.0.0.5 will not work on froyo.. there was once a CWM made specially for froyo and you can get it from here:
http://forum.xda-developers.com/showpost.php?p=16147687&postcount=1
Problem is that there is no more development for froyo.. so for any questions and issues that you may encounter, you will have to figure it out yourself..
Why not upgrade the phone to GB? It would a lot easier and developement is concentrated on this version. you can flash with Odin tool to upgrade the phone to GB. flash cwm 4.0.0.5 from there and you can start installing custom roms on it. you can choose to update cwm as well since current one is 5.0.2.6..

vinmac said:
My friend want to upgrade his phone,
and asking me to do so.
I know few things and not a noob but also not a dev or a pro.
Thus i want to ask a question:
He is having an unrooted Galaxy POP GT S 5570 with stock 2.2 froyo
Question is that
Can i directly flash CWM recovery 4.0.0.5 using odin
that is just flashing tass.ops and tass-recovery-cwm.tar ???
Because somewhere i read that CWM requires GingerBread on GT S 5570 to work?
And i know that it is very difficult to unbrick for users like me and sometimes impossible for noobs.
I'm having Xperia X8
And sony ericcson devices are very easy to unbrick using official SONY UPDATE SERVICE SOFTWARE.
If there is something like the above one, for SAMSUNG,
Please tell me?
I tried to OC his phone once and phone strucked in bootloops.
Then somehow I managed to install Stock Firmware of Galaxy MINI
Then we go to the CUSTOMER Care and asked them to reinstall the firmware
And again he is on stock 2.2 only.
Click to expand...
Click to collapse
if you want to upgrade to latest Indian gingerbread ddkq7 here is the link:- http://androidadvices.com/update-samsung-galaxy-pop-s5570-ddkq7-gingerbread-236-firmware/
video tutorial to install cwm link:- http://www.youtube.com/watch?v=79PqHiCm-3E
cwm link froyo gb link:- http://forum.xda-developers.com/showthread.php?t=1342190

Thanks for your support and help.
I'm reading and searching on these things.
Now the actual thing that i want is
A backup of the current state.
But if is 100 % sure that GT-S5570_INU_S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7.rar
file will upgrade to GB and works well, then no need of backup.
Ok i had understood all the things .
I would surely upgrade my friends phone and install CWM and provide him with a big list of CUSTOM ROMS which devs are developing at our beloved XDA FORUMS.
XDA ROCKS
THANKS A LOT for the assistance.

vinmac said:
Thanks for your support and help.
I'm reading and searching on these things.
Now the actual thing that i want is
A backup of the current state.
But if is 100 % sure that GT-S5570_INU_S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7.rar
file will upgrade to GB and works well, then no need of backup.
Ok i had understood all the things .
I would surely upgrade my friends phone and install CWM and provide him with a big list of CUSTOM ROMS which devs are developing at our beloved XDA FORUMS.
XDA ROCKS
THANKS A LOT for the assistance.
Click to expand...
Click to collapse
Stock roms can't be backed up. only custom roms can be backed up.

you have to flash tass recovery via odin

Tab GT-P1000 Which version of Clockworkmod do I install?

Hi
I have a non branded GT-P1000 Tab. Trying to follow instructions at http://www.androidauthority.com/galaxy-tab-gt-p1000-android-4-0-4-ics-aokp-rom-97483/ to install AKOP.40 ROM
Need Clockworkmod installed.
Installed Rom Manager then attempted to install Clockworkmod - It asks me to choose my phone type. Closest options are: Galaxy Tab - ATT, Samsung Galaxy Tab - T-Mobile, Samsung galaxy tab - VZW.
What do I install, or is there another version of Clockworkmod for non Branded TAB somewhere?
Thanks ColinK

From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app

priyana said:
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi
Thanks for your prompt reply. The instructions for flashing overcome seems to have multiple steps and "IF's", with multiple opportunities to go wrong.
The android authority guide seems straightforward, and I have gone through some of it - except the guide makes no mention of how to get CWM.
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
If not, were exactly does the install part start and do I also have to install Odin?
Sorry for so many questions / uncertainty.
ColinK

As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.

colink said:
Hi
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
ColinK
Click to expand...
Click to collapse
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar filehttp://forum.xda-developers.com/editpost.php?do=editpost&p=29235809
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Actually you can flash a CWM.zip update without installing a kernel after you root your device.
But again, installing kernel with CWM included just like Priyana said would be a lot easier and simpler.

priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK

Hi ColinK,
Unfortunately there is no straight way to install AOKP.
I am afraid you have to follow the guide to the letter, sort of.
This is why.
Some froyo from for our tab has locked bootloader.
So if you are on froyo there is a small chance you had a locked one.
You need to root your tab then run an app to check and to patch.
(I forgot by now whether you need root to check... to patch definitely yes)
Now, that is why Overcome guide said if froyo you need to root.
It is not strickly necessary.
Now, let's assume you don't have locked bootloader.
You only need to use Odin and flash GB stock safe v5 (which is actually Gingerbread Samsung version JQ1 Italian rom)
So, you need Odin.
Unpack the gb stock safe and you find Odin and USB driver.
Install USB driver first, then plug in your tab and your PC will detect the new device.
Unplug your device.
Install Odin.
Launch Odin, put your device to download mode and plug your device in to PC.
I am not a big user of Odin. I use heimdall in Linux which is simple and just work, so my memory is sketchy.
Odin will detect your device. There will be messages on screen.
Line up the files according to the guide and flash.
If no error your tab rebooted and you have GB ROM.
that of course isn't the end because you need cwm.
So continue with the guide.
It asks you to use Odin to flash overcome kernel tar.
Do it and you will end up having cwm recovery.
That is the end of guide.
You don't need to flash overcome rom.
Just follow my other thread reply to get AOKP.
Sent from my GT-P1000 using xda app-developers app

Addition info: The easiest way to check if you are rooted or not:
Download and install 'root check' or 'got root?' from google play store.
If the rooting failed, you can try the doomslords rooting script. It was my favorite root script up to GB2.3.3
Once you succesfully rooted, continue download the bootloader patch for froyo.

I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.

priyana said:
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
Click to expand...
Click to collapse
I can feel you. I can't even 100% remember if gb-stock-safe is pre-rooted or overvcome kernel gives root access for it.

colink said:
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Click to expand...
Click to collapse
Well Colink, I must say.....priyana's guides are one of the best ones for installing roms ...it's just perfect...I flashed my tab with aokp without even getting a single error....read the overcome guide perfectly ...I know it's a bit confusing but read it ten times and u will be just fine
Sent from my GT-P1000 using xda app-developers app

Overcome links are all down.
Overcome links are all down. Any alternatives? (Rooted gt-p1000 2.3.3 Gingerbread DXJPI

Come on,
a little search in overcome thread and should spot it.
Here is the spoiler
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/

I too am trying to get the Tab up to ICS via the overcome procedure, links are down on overcome and not all the links on the tabfirmware are working, specifically the Overcome_Kernel_v4.0.0.zip doesn't work, with a nice <This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.> message.
There's also the link to the full overcome site as a screen capture or something in this post http://forum.xda-developers.com/showthread.php?p=20974872, but it's now giving a 404, so my confidence level for doing this is now low ;-(
Any help appreciated. pls, pls, pretty pls.
Don't want a bricked Tab would make me sad

Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1

I recommend first upgrading to 2.3.3, then flashing chainfire's modded cwm via odin:
http://www.4shared.com/zip/vsN8JA6x/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
and then flashing overcome via cwm:
http://www.ravishare.com/1fragzl971e6/Overcome_7_Series_v4.1.0_NoWipe.zip.html
then you can flash any aokp or cyanogenmod mtd build.

Upgraded to ICS and thanks
Ok so thanks to all who helped out with links to roms and guides.
I now have a lovely Galaxy Tab with ICS from AOKP.
And for anyone who would like to try but hasn't yet it really is surprisingly easy, just take your time and make sure to do it right, you won't regret the upgrade to ICS
I stood on the shoulders of giants to do this :good:.

So you use the method I posted or what Gogol posted?
Sent from my GT-P1000 using xda app-developers app

ha ha

guyz i need help in installing cwm in my rooted galaxy tab p1000 running 2.2 froyo

[Q] Changing ROM plus rooting plus other apps

Good day. My name is Renoux. I have a South African Samsung Galaxy Note GT-N7000 on the MTN network but currently using Vodacom Simcard.
I am so new to flashing and rooting and there is just TOO much info to go through on this site and also any other. I am even more clueless now than I was before after reading about it.
I would like to do the following:
1) Backup everything on my phone (will the app I'm going to use still be on my phone after reset? do I need to download again and my backup file will automatically be added? Will I lose some data?)
2) I want to use a ROM called Paranoid Android. the one I have is pa_n7000-3.60-11JUN2013-053741.zip
3) How do I uninstall my current OS? I am using Ice Cream Sandwich version 4.0.4 with Baseband version N7000XXLRB.
PDA: N7000XXLRI
PHONE: N7000XXLRB
CSC: N7000OJVLR3
Build info: Wed Jul 11 19:41:13 KST 2012
4) What are the programs that I need to download? for both my PC and the phone to get this done? could you maybe include links please?
5) Do I root after or before installing the new ROM? using what? how?
basically, delete everything on my phone, after backing up the most important stuff, delete ICS, install paranoid android and then root it for full use.
Thanks.

If you want to backup everything like app+data then you can use titanium backup pro but you need root for that.. I usually provide links but as you are too lazy to read what already exists and will be there till next year for sure (just saying).. Search for philz kernel on google for n7000 and download .zip for kernel corresponding to your rom.. Put it on ext sd.. Press volume up+power+home button and you will get stock recovery from there use the volume down key to choose install zip from ext sd and press power button to select. Once done you will have brickbug safe kernel and root. Now you can install titanium backup pro and backup all the apps+data (only non system apps recommended). Now once you are done go to paranoid rom thread and read the instructions there for how to install.. If you want to install ics or even jb for any other country you can do that using pc odin or mobile odin.. Search for dr ketans stock rom n7000 in google and you will get all the stock rom to download with how to.. If you ever install stock rom again you will have to root again using the same method as mentioned above to be able to use tbp and restore apps with or without data..
Sent from my GT-N7000 using xda app-developers app

Here is how to do it.
Root your phone. There are a lot off info on YouTube on hire to do. Here is one example: http://goo.gl/UWgl6
When rooting, you do not lose any information on you phone, by when changing rom you do. Therefore, use titanium backup pro (yes, buy the pro version) to backup your data.
When rooted, it is also very easy to install a new rom. My suggestion is the Stunner rom. How to install a rom is also very simple. Here is a video to show you hire to do it: http://goo.gl/Df72h
Good luck!
Sent by Tapatalk from my Samsung Galaxy Note.

treacherous_hawk said:
If you want to backup everything like app+data then you can use titanium backup pro but you need root for that.. I usually provide links but as you are too lazy to read what already exists and will be there till next year for sure (just saying).. Search for philz kernel on google for n7000 and download .zip for kernel corresponding to your rom.. Put it on ext sd.. Press volume up+power+home button and you will get stock recovery from there use the volume down key to choose install zip from ext sd and press power button to select. Once done you will have brickbug safe kernel and root. Now you can install titanium backup pro and backup all the apps+data (only non system apps recommended). Now once you are done go to paranoid rom thread and read the instructions there for how to install.. If you want to install ics or even jb for any other country you can do that using pc odin or mobile odin.. Search for dr ketans stock rom n7000 in google and you will get all the stock rom to download with how to.. If you ever install stock rom again you will have to root again using the same method as mentioned above to be able to use tbp and restore apps with or without data..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your help. But i want to know, which one do i download? There is more than one philz kernel and im not sure which to download for my phone? Sorry for being an idiot.

RenouxMarais said:
Thanks for your help. But i want to know, which one do i download? There is more than one philz kernel and im not sure which to download for my phone? Sorry for being an idiot.
Click to expand...
Click to collapse
Your PDA: N7000XXLRI
Philz ICS kernels: http://www.mediafire.com/?3ale6m9q6b6a3
Original topic: http://forum.xda-developers.com/showthread.php?t=1901191
Find the one with LRI at the end.

thank you all for your help. got my phone rooted using cwm adn everything is backed up so this weekend im going to install a nice custom rom for myself.
and for the final question, how do i close this thread?

RenouxMarais said:
thank you all for your help. got my phone rooted using cwm adn everything is backed up so this weekend im going to install a nice custom rom for myself.
and for the final question, how do i close this thread?
Click to expand...
Click to collapse
:good:
Ask the moderator or just leave it be.

[Q] Flashing & Upgradation of SGS I9000

Hi All,
A very good morning to all.
As the title suggests, I am requesting guidance in step by step manner. Since there is so much information that I am confused & hence creating this thread.
Below are the complete info of the phone:
Model Number: GT-I9000
Firmware Version: 2.3.6
Baseband Version: I9000DDJV7
Kernel Version: [email protected]#2
Build Number: GINGERBREAD.DDJVB
My phone is a stock phone & has been never flashed before.
As per my research, its said that I should have a custom recovery in place & Clockworkmod recovery is the one of the best. I want to install the same using ROM Manager rather than using ODIN. I have got it from Google Store. But after clicking on install/upgrade "Clockworkmod recovery" then confirming my phone model. Then when I click Flash Clockworkmod Recovery I get this error - "An error occured while flashing your recovery".
I am not using ODIN as I can't delete update.zip file from my SD Card. Hence I am avoiding that approach so that I don't have any issues with accidental deletion of update.zip.
Requesting guidance.
Regards
Sudhir

Now, I have found an app called root checker. It is giving me the below info:
SU - Not Found.
Root Access - No Access.
Please guide me on what should I do next.
Regards
Sudhir

Hey there,
So the reason why ROM manager isn't working for you is precisely the thing you discovered using Root Checker. You're not rooted, and ROM Manager needs root access to work. (ROM Manager doesn't install Clockworkmod properly either, so you may want to refrain from using that).
So you need to root your device first.
The easiest and safest way of doing this is
1.) Flashing XXJW4 using Odin (if you're unable to use Odin for whatever reason this step isn't easily done).
Then
2.) Flashing Cf-Root made for XXJW4 (the thread is in these forums) through Odin.
This will root your device and install CWM onto it, so you can flash away.
Sent from my GT-P7510 using Tapatalk HD

Soryuu said:
Hey there,
So the reason why ROM manager isn't working for you is precisely the thing you discovered using Root Checker. You're not rooted, and ROM Manager needs root access to work. (ROM Manager doesn't install Clockworkmod properly either, so you may want to refrain from using that).
So you need to root your device first.
The easiest and safest way of doing this is
1.) Flashing XXJW4 using Odin (if you're unable to use Odin for whatever reason this step isn't easily done).
Then
2.) Flashing Cf-Root made for XXJW4 (the thread is in these forums) through Odin.
This will root your device and install CWM onto it, so you can flash away.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks Soryuu.. for the guidance.I wanted to know if CF-Root made for XXJW4 will work for DDJV7.
Regards
Sudhir

It may but I do not recommend it. I have done that a couple times but with xxjvk and I think xxjvo. If you gona try it do it at your own risk. Rather download the cf root for ddjv7

Hmmm, I don't think one was made for DDVJ7. Chainfire stopped making them after JW4 so a lot of newer firmwares are missing.
I wouldn't recommend trying, but you SHOULD be able to flash in a stock rom or stock kernel again should something go wrong.
But as I said, I wouldn't try it for the sake of safety.
Easier to flash XXJW4 instead because at least you know that the CF-Root made for it will obviously work
Sent from my GT-P7510 using Tapatalk HD

Soryuu said:
Hmmm, I don't think one was made for DDVJ7. Chainfire stopped making them after JW4 so a lot of newer firmwares are missing.
I wouldn't recommend trying, but you SHOULD be able to flash in a stock rom or stock kernel again should something go wrong.
But as I said, I wouldn't try it for the sake of safety.
Easier to flash XXJW4 instead because at least you know that the CF-Root made for it will obviously work
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks Soryuu & Blase Zero for your time & guidance.
I got a link - http[://]cmformini[dot]blogspot[dot]in
Just wanted to know whether the procedure is so simple & straight forward....????
Can I follow the same..??
Regards
Sudhir