Database Develop

[Q] Root help.

Hi all.
I am helping a friend who has a i9000. I have done a heap of searching and can not seem to get this to work.
He has
Model GT-I9000
Firmware 2.2
Baseband I9000HVJP3
Kernel 2.6.32.9
Build Froyo.HVJP4
I tried a couple different ways and just get an error in recovery. I am obviously missing something so if anybody could point me in the right direction or give any help it would be greatly appriciated.

You are trying to help him enable root access on his phone, right?
Well, if that's the case, there are more than one ways of doing that.
Flashing a new kernel that has been already modified to provide root access, like CF-Root or Speedmod kernel, using ODIN, will do the trick.
You could also accomplish that by following an “one-click” rooting process, found here.
The latter one uses a method called “rageagainstthecage” which can be used even manually, using adb.
Should you need any directions, let us know
Enjoy!

Thank you. Worked straight away. I searched and searched and all the ones i tried did not work.
Now i have another problem maybe you could help. I was using cwm as that is what i am used to with my dhd and when i flash the recovery it says it has worked but when i do a backup and try to go into cwm i just get the standard recovery.
Anyideas?

I seem to have some issues getting your point...Which recovery are you trying to flash?
And what is the standard one?

Clockwork Mod. this is what i am trying to install. Unless there is a better one for i9000. as i said it is what i am used to with dhd.
The standard one is just the one that you get into with the 3 buttons as it loads. I am using rom manager and trying to make a backup before we install rom and it starts to reboot the phone into recovery like it should but i just get the standard 3 button recovery.

I see. Are you on a stock kernel or used any of the above mentioned?

stock. I used the one click with rageagainstthecage. I have su access now and rom manger is allowed in superuser.

Perfect!
Follow this!

i did see that and was following it. But step 6. It does not start and i do not see the option to reinstall packages.

Which recovery mode do you have installed?
2e or 3e?
If you are on 2e, I have a quick solution to that.

sorry for late reply. I dont have his phone right now but I am sure it is 3e
Swyped from my Desire HD using XDA App

How about flashing Speedmod kernel? You will have CWM installed automatically.

Yes thank you. All sorted now. Will go flash some roms for him now.

Anytime!

[Q] Unable to get Superuser Permission for CWM on Galaxy Note

hie all...
i have done all the steps to root + CWM using the CF-Root method using the 'not-rooted-yet.bat'
manage to get CWM and superuser installed but everytime i go in to CWM. i get this message:
'This version of CWM Manager should be used with CF-Root v5.0 or newer. It appears you are running a different kernel. Various features have been disabled.'
My purpose is to flash to a custom ROM but i cant seem to get past this rooting part. tried most of the method suggested in forums but kept on getting the same error again and again.
Baseband Version: N7000DXKJ3
Kernel Version: 2.6.35.7-N7000ZSKK1
Please help. thx!

What is your build number?
you can see below kernel version in setting - about phone

ok i dont know what i did just did is for the better or worst.
i used kies and it updated my firmware.
Baseband Version: N7000DXKL2
Kernel Version: 2.6.35.7-N7000DXLA1-CL886914
Build Number: GINGERBREAD.DXLA1

I think this shud have solve your issue, it seems, your kernel updated now. But you didn't do it with PC Odin?
otherwise you may have lose Root
Edit : Oh read you have used kies, I think your device no more have Root.

yes i have lost root
but there is only superuser app in the phone but i cant assign root to any app
and the CWM is missing from the applications already
so i assume i have to root + CWM all over again now
please point me to a correct thread. i read a quite a number of your guides and im pretty confused how do i go about it with the newer ROM i am in now which is not directly rootable .
am i correct 2 say so?
sorry for the nooby questions/remarks.

cs2000 said:
yes i have lost root
but there is only superuser app in the phone but i cant assign root to any app
and the CWM is missing from the applications already
so i assume i have to root + CWM all over again now
please point me to a correct thread. i read a quite a number of your guides and im pretty confused how do i go about it with the newer ROM i am in now which is not directly rootable .
am i correct 2 say so?
sorry for the nooby questions/remarks.
Click to expand...
Click to collapse
Yes you are on nonrootable rom.
I giving u guideline here follow it.
1. If you have already any older rom on your hand, then just flash it with pc odin
Then get root + cwm,
After that, you can update to newer rom with cwm.
2. If you dont hav older rom handy, just find last link on my signature 'when other method fail.....' Follow that link, then you will have rooted rom.
After that u can get cwm/ mobile odin and update newr rom with it.
Sent from my GT-N7000 using xda premium

cs2000 said:
yes i have lost root
but there is only superuser app in the phone but i cant assign root to any app
and the CWM is missing from the applications already
so i assume i have to root + CWM all over again now
please point me to a correct thread. i read a quite a number of your guides and im pretty confused how do i go about it with the newer ROM i am in now which is not directly rootable .
am i correct 2 say so?
sorry for the nooby questions/remarks.
Click to expand...
Click to collapse
Flash Rootable Stock ROM KL3
After flashing Enable USB debugging in Device (Settings>Applications>Development)
Download "CF-Root-SGN_XX_ODD_KL3-v5.0-CWM5.rar"
Extract it and Run "not-rooted-yet.bat"
wait for reboot.
This will roots your device and installs CWM recovery.
Download links
http://forum.xda-developers.com/showthread.php?t=1329360

Tab GT-P1000 Which version of Clockworkmod do I install?

Hi
I have a non branded GT-P1000 Tab. Trying to follow instructions at http://www.androidauthority.com/galaxy-tab-gt-p1000-android-4-0-4-ics-aokp-rom-97483/ to install AKOP.40 ROM
Need Clockworkmod installed.
Installed Rom Manager then attempted to install Clockworkmod - It asks me to choose my phone type. Closest options are: Galaxy Tab - ATT, Samsung Galaxy Tab - T-Mobile, Samsung galaxy tab - VZW.
What do I install, or is there another version of Clockworkmod for non Branded TAB somewhere?
Thanks ColinK

From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app

priyana said:
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi
Thanks for your prompt reply. The instructions for flashing overcome seems to have multiple steps and "IF's", with multiple opportunities to go wrong.
The android authority guide seems straightforward, and I have gone through some of it - except the guide makes no mention of how to get CWM.
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
If not, were exactly does the install part start and do I also have to install Odin?
Sorry for so many questions / uncertainty.
ColinK

As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.

colink said:
Hi
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
ColinK
Click to expand...
Click to collapse
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar filehttp://forum.xda-developers.com/editpost.php?do=editpost&p=29235809
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Actually you can flash a CWM.zip update without installing a kernel after you root your device.
But again, installing kernel with CWM included just like Priyana said would be a lot easier and simpler.

priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK

Hi ColinK,
Unfortunately there is no straight way to install AOKP.
I am afraid you have to follow the guide to the letter, sort of.
This is why.
Some froyo from for our tab has locked bootloader.
So if you are on froyo there is a small chance you had a locked one.
You need to root your tab then run an app to check and to patch.
(I forgot by now whether you need root to check... to patch definitely yes)
Now, that is why Overcome guide said if froyo you need to root.
It is not strickly necessary.
Now, let's assume you don't have locked bootloader.
You only need to use Odin and flash GB stock safe v5 (which is actually Gingerbread Samsung version JQ1 Italian rom)
So, you need Odin.
Unpack the gb stock safe and you find Odin and USB driver.
Install USB driver first, then plug in your tab and your PC will detect the new device.
Unplug your device.
Install Odin.
Launch Odin, put your device to download mode and plug your device in to PC.
I am not a big user of Odin. I use heimdall in Linux which is simple and just work, so my memory is sketchy.
Odin will detect your device. There will be messages on screen.
Line up the files according to the guide and flash.
If no error your tab rebooted and you have GB ROM.
that of course isn't the end because you need cwm.
So continue with the guide.
It asks you to use Odin to flash overcome kernel tar.
Do it and you will end up having cwm recovery.
That is the end of guide.
You don't need to flash overcome rom.
Just follow my other thread reply to get AOKP.
Sent from my GT-P1000 using xda app-developers app

Addition info: The easiest way to check if you are rooted or not:
Download and install 'root check' or 'got root?' from google play store.
If the rooting failed, you can try the doomslords rooting script. It was my favorite root script up to GB2.3.3
Once you succesfully rooted, continue download the bootloader patch for froyo.

I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.

priyana said:
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
Click to expand...
Click to collapse
I can feel you. I can't even 100% remember if gb-stock-safe is pre-rooted or overvcome kernel gives root access for it.

colink said:
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Click to expand...
Click to collapse
Well Colink, I must say.....priyana's guides are one of the best ones for installing roms ...it's just perfect...I flashed my tab with aokp without even getting a single error....read the overcome guide perfectly ...I know it's a bit confusing but read it ten times and u will be just fine
Sent from my GT-P1000 using xda app-developers app

Overcome links are all down.
Overcome links are all down. Any alternatives? (Rooted gt-p1000 2.3.3 Gingerbread DXJPI

Come on,
a little search in overcome thread and should spot it.
Here is the spoiler
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/

I too am trying to get the Tab up to ICS via the overcome procedure, links are down on overcome and not all the links on the tabfirmware are working, specifically the Overcome_Kernel_v4.0.0.zip doesn't work, with a nice <This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.> message.
There's also the link to the full overcome site as a screen capture or something in this post http://forum.xda-developers.com/showthread.php?p=20974872, but it's now giving a 404, so my confidence level for doing this is now low ;-(
Any help appreciated. pls, pls, pretty pls.
Don't want a bricked Tab would make me sad

Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1

I recommend first upgrading to 2.3.3, then flashing chainfire's modded cwm via odin:
http://www.4shared.com/zip/vsN8JA6x/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
and then flashing overcome via cwm:
http://www.ravishare.com/1fragzl971e6/Overcome_7_Series_v4.1.0_NoWipe.zip.html
then you can flash any aokp or cyanogenmod mtd build.

Upgraded to ICS and thanks
Ok so thanks to all who helped out with links to roms and guides.
I now have a lovely Galaxy Tab with ICS from AOKP.
And for anyone who would like to try but hasn't yet it really is surprisingly easy, just take your time and make sure to do it right, you won't regret the upgrade to ICS
I stood on the shoulders of giants to do this :good:.

So you use the method I posted or what Gogol posted?
Sent from my GT-P1000 using xda app-developers app

ha ha

guyz i need help in installing cwm in my rooted galaxy tab p1000 running 2.2 froyo

Cannot enter CWM recovery although it's flashed

Hi guys,
First of all, I apologize in advance if this isn't the correct place and/or thread title for my question. I've rarely posted in this forum as I'm usually able to find what I'm looking for.
I'll try to describe the issue fully so bear with me. If you're not patient, skip the next two paragraphs and go to the problem.
I bought my Galaxy S more than two years ago; back then it had Android 2.1 and I believe I also flashed to 2.1.1 via Samsung Kies.
I later flashed Froyo via Odin, rooted with 1ClickLagFix and installed a ton of apps. I haven't updated anything for more than a year, perhaps year and a half. I recently uninstalled many applications I wasn't using, including the lag fix, unrooted and began preparing to flash something newer. I didn't have the time though, so I dropped the project, and besides, the phone is working much smoother without all the unnecessary crap I had before.
Yesterday I decided to finish the job and flash DarkyROM 11 Black Edition. I rooted the phone again using Z4root, installed CWM ROM Manager and flashed CW recovery. I need the recovery in order to flash CM9 and then the ROM per the installation instructions for DarkyROM.
At this point I might as well wait for v.12, but I'll still need the CW recovery I guess. Or I may flash v.11 as planned; I still haven't decided.
The problem: CW recovery is flashed, but when I reboot I go to 3e recovery instead (tried with the 3 buttons or boot to recovery from ROM Manager, same result). I then copied the CW recovery file directly on the SD card and renamed it update.zip (it was recovery-update.zip) and tried to apply it. Didn't work. As far as I remember it said it couldn't verify file integrity or something. I can check for sure if you'd like.
Here's what I'm running (I'll put what I see, let me know if you need more):
GT-I9000
Firmware: 2.2
Baseband version: I9000XXJPP
Kernel version: 2.6.32.9
[email protected] #1
Build number: FROYO.XFJP7
ROM Manager (installed v. 5.5.1.4 yesterday) says current recovery is ClockworkMod 2.5.1.2.
I'd appreciate any insight. I don't have much experience flashing my phone, so if you have a solution, it would be best to include not only links to relevant threads but also an explanation as to what steps I should follow in my specific case.
Thanks in advance!

Filkolev said:
Hi guys,
First of all, I apologize in advance if this isn't the correct place and/or thread title for my question. I've rarely posted in this forum as I'm usually able to find what I'm looking for.
I'll try to describe the issue fully so bear with me. If you're not patient, skip the next two paragraphs and go to the problem.
I bought my Galaxy S more than two years ago; back then it had Android 2.1 and I believe I also flashed to 2.1.1 via Samsung Kies.
I later flashed Froyo via Odin, rooted with 1ClickLagFix and installed a ton of apps. I haven't updated anything for more than a year, perhaps year and a half. I recently uninstalled many applications I wasn't using, including the lag fix, unrooted and began preparing to flash something newer. I didn't have the time though, so I dropped the project, and besides, the phone is working much smoother without all the unnecessary crap I had before.
Yesterday I decided to finish the job and flash DarkyROM 11 Black Edition. I rooted the phone again using Z4root, installed CWM ROM Manager and flashed CW recovery. I need the recovery in order to flash CM9 and then the ROM per the installation instructions for DarkyROM.
At this point I might as well wait for v.12, but I'll still need the CW recovery I guess. Or I may flash v.11 as planned; I still haven't decided.
The problem: CW recovery is flashed, but when I reboot I go to 3e recovery instead (tried with the 3 buttons or boot to recovery from ROM Manager, same result). I then copied the CW recovery file directly on the SD card and renamed it update.zip (it was recovery-update.zip) and tried to apply it. Didn't work. As far as I remember it said it couldn't verify file integrity or something. I can check for sure if you'd like.
Here's what I'm running (I'll put what I see, let me know if you need more):
GT-I9000
Firmware: 2.2
Baseband version: I9000XXJPP
Kernel version: 2.6.32.9
[email protected] #1
Build number: FROYO.XFJP7
ROM Manager (installed v. 5.5.1.4 yesterday) says current recovery is ClockworkMod 2.5.1.2.
I'd appreciate any insight. I don't have much experience flashing my phone, so if you have a solution, it would be best to include not only links to relevant threads but also an explanation as to what steps I should follow in my specific case.
Thanks in advance!
Click to expand...
Click to collapse
clockworkmod 2.... really ? because cwm 5 or 6 is the actual version .. maybe rom manager cannot flash the recovery in froyo, try to connect phone .with kies and update to gingerbread
Sent from my GT-I9001 using xda premium

Jonboy2011 said:
clockworkmod 2.... really ? because cwm 5 or 6 is the actual version .. maybe rom manager cannot flash the recovery in froyo, try to connect phone .with kies and update to gingerbread
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Can't do... Kies cannot upgrade the firmware since I'm on a custom ROM (or because it didn't match my country, I don't quite remember the reason).
I was following the installation instructions for DarkyROM for Froyo; it says I should have it rooted with CWM and use the recovery to flash CM9 and the ROM itself afterwards, so I believe Froyo isn't the issue. The kernel perhaps? Have no idea, I'm a novice more or less. I do know how to follow instructions though, so I'm not a complete idiot
Besides geting a newer ROM with newer Adnroid version I'd also like to clean up the mess I've been creating for the past year and a half. Maybe flashing a stock ROM and then DarkyROM would be easier. I'm looking for the most time-efficient method.

[Q] First attempt at rooting (4.0.4)

I have been reading this website and several others over the last few days and last night decided to give rooting a go. Trouble is - I am not sure where to begin.
Last night I tried downloading Philz kernel - PhilZ-cwm6-DXLR5-OLB-v2.7 since my kernel version is 3.0.15-n7000dxlr5-cl968032.
I then followed these instructions:
Download xxx-signed.zip kernel matching your ROM
Put the previously downloaded xxx-signed.zip file on your external sd card
Boot into stock recovery (volume up+home+power)
Select "apply update from external storage".
Now select the xxx-signed.zip file you copied in previous step
You are rooted + new PhilZ-cwm6 kernel with CWM6
What I got was a message like - signature authorization failed.
Not sure what to do next and would appreciate some guidance.
I am doing this basically because Ive decided to keep this phone a little longer, learn about rooting and try my hand at experimenting some of the custom roms.
Again appreciate any assistance / guidance anyone might be willing to provide
thank you

Is this the one you tried?
http://d-h.st/o9X

yes... i think that is it

download using phone browser. the move it to ext sd and try again..

case sensitive link.... my bad

Obviously Not. The link i posted links to the kernel. It should be downloading the kernel.

same result..... signature verification failed

The otherday I use PhilZ 3.99 for LR5 from his thread in ori dev. It works fine.
http://www.mediafire.com/?3ale6m9q6b6a3
Sent from my phone.

Like I said... im new to this, but the instructions seem simple enough (as above). Wish I could get it to work for me....

I saw you are using ver 2.7. On the PhilZ he has 3.99 for lr5. It worked for me.
Sent from my phone.

i am downloading the 3.99 version now - see how it goes

tried 3.99 and get the same result -- signature verification failed

Strange. Maybe check if there a box in the stock recovery that can be ticked or unticked? Otherwise, check other root method from dr.ketan sticky at android dev thread. Many easy method, even an apk that root.
Sent from my phone.

dont know if this is relevant to the issue, but here it goes
About a month ago, I let the phone update some software - didnt really pay attention what it was updating as i was working.
Later that day i noticed my company email was not coming through. I raised a ticket with IT and received a response after looking into my case stating that the company does not allow rooted devices to access the email system. I found this strange because I had never tried to root the device. Is it possible that somehow an update occurred that rooted my phone?
Im aware that there are several ways to root, but again, im new to this would appreciate further guidance that might help me get this phone rooted.
thanks again

I would try method 0 and 1B from dr.ketan thread below.
http://forum.xda-developers.com/showthread.php?p=18978158
Let us know how it goes.
Sent from my phone.

willing to try these methods - if i start with method 0, how do i go about flashing with a safe kernel?
i have read quite a bit about kernel issues for 4.0.4 so just dont want to create a serious issue

newman330 said:
if i start with method 0, how do i go about flashing with a safe kernel?
Click to expand...
Click to collapse
once rooted, use mobile odin to flash tar.md5 version of philz kernel, not zip

ok.... im rooted - thanks to both of you for the assistance.
now.... im rooted at 4.0.4. If i want to install a custom rom say for 4.2 or 4.3, I guess I need to root to the appropriate operating system. how does this process work? do i need to first flash to a safe kernel?
bear with me.... this is very complicated for my non-IT brain : )

The most reliable roms now are still stockbased custom roms 4.12. Other newer roms are still experimental. I like Sweet rom 10.5. You need to read instructions for rom flashing from the rom thread.
Sent from my phone.

i have downloaded the following files to computer and getting ready to place them on my phone:
PhilZ-cwm6-DXLR5-OLB-3.99.tar.md5
MobileODIN_FlashKernel_N7000-v3.0
MobileODINLite-v3.85.apk
Is there any special instructions i need to be aware of for mobile odin? I assume i just run the apk program and follow instructions from there to get my safe kernel flashed?