Related
New Release... and must try !! This rom..
Rom Download :
http://micmeo.com/BlueAngel/AKU_3.0/BA_WM2005_Logout_5.0.06_AKU3.0.zip
Thanks Logout , Micmeo And All Developers!!
:twisted:
good job!
flash it now
Autorom is wrong?
I've just downloaded the ROM and tried to install it on my BA, but the autorun on the extended rom didn't do anything.
So, I've copied to the autorun.exe from Helmi's rom and it's loading the extended files now.
Up and Running now
After the little autorun problem was fixed, my BA is up & running.
At first look, I would say that it is a little bit faster then Helmi's 1.2 ROM.
The system quickly responds to taps on the screen (menu, buttons etc).
Wireless & Bluetooth are working (Bluetooth via the Comm.Manager and TrayIcon, Wireless only via the TrayIcon).
I had no problems installing some other software (iSilo, BeeLineGPS, AvantGo, SPB Weather, PocketLAN, mNotes) and they seems to be running fine.
Maybe Logout can share with us what is specific about this release and if there are any known problems.
It is 5.04.06 not 5.0.06.
You can see the version 5.04.06 in boot image(The green image of push technology) or in Device Information.
Please correct the name.
anyone know... why my mms always failed to send ....help!!!
some1 plz.. post shutupxp for wm5.0
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Phreakazoidz said:
anyone know... why my mms always failed to send ....help!!!
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Click to expand...
Click to collapse
It's a shame.I never use MMS.
Try configure MMS account but no success yet. :wink:
Phreakazoidz said:
New Release... and must try !! This rom..
Rom Download :
http://micmeo.com/BlueAngel/AKU_3.0/BA_WM2005_Logout_5.0.06_AKU3.0.zip
Thanks Logout , Micmeo And All Developers!!
:twisted:
Click to expand...
Click to collapse
Thanks, downloading right now.
ringing delay
if use mp3 as ringtone, it will be delay about 5-7seconds....but if use midi or wav then it take around 2 or 3 sencond......any solution for this??
thanx
Very fast rom !!!!
But :
If I turn on speakerphone the icon and notification stays on the screen even after the call is ended.
How can I remove this ??
Finnaly Logout ROM is out!!... been waitin for quite some times... congratulation logout.. :wink:
btw, I believe u strip the os part from my rom, cos some part ar not from bepe version, I recommend u remove some drivers that didn't not needed, this is my mistakes, and this is why I release the hotfix logout. that drivers is only usable with iDO device, for our device its only taken resource and no noticable function...
I'm happy with the rom release, so we can have an options, and maybe we can hv a good comparating in the way to find the ROM that we can use in the end, that my goal not popularity...lol...
once again... congratulation logout...
Phreakazoidz said:
anyone know... why my mms always failed to send ....help!!!
some1 plz.. post shutupxp for wm5.0
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Click to expand...
Click to collapse
its seems this problem is ur main problem bro...what setting cab u use? if u use from wm2003 version, u just need to check the setting in Messaging >> MMS Configuration >>Servers>>Choosse ur operator >>and change the connect via dropdown list to ur operator MMS setting, reset maybe needed and then try to send again... btw also look at the preference tab there's a setting for Photo resolution.
@helmi....
i check mms configuration , i change port 3337 to 9201 ,send MMS again my MMS work perfectly !!!
SOLVED!!
Thanks helmi
:twisted:
anyone have a thoroughly tested speed analisys with everything turned on and synced a few times yet? How the speed compared to heli's latest?
Thanks Bebe, Helmi and all for new tesed Rom.
@Helmi: Yes, I replace some your file, module, registry were missing in original AKU3.0 Rom.
I thinks you should build your rom on new core (nk.nba with AKU3.0 Xip file) and some registry add in boot.hv better than default.hv. Boot.rgu on BA WM2005 is not necessary.
@ekapco: I try to add speaker phone in my rom, but It doesn't work, can't turn off it. Pls delete speaker phone in startup folder.
Now I'm very busy in my office, may be I can't edit bugs in my rom in longer time. I believe Helmi will release best rom WM2005 for BA.
logout said:
@ekapco: I try to add speaker phone in my rom, but It doesn't work, can't turn off it. Pls delete speaker phone in startup folder.
Now I'm very busy in my office, may be I can't edit bugs in my rom in longer time. I believe Helmi will release best rom WM2005 for BA.
Click to expand...
Click to collapse
@ Logout : It turns off okay, but just the Icon remains !
Small bug -> Yesterday missed some calls. Red light was flashing. I read the notifications, but red light won't turn off, until soft reset !
Another small bug -> Softkeys are not working like they should.
For example in commanager there should be an exit/done key ??
Wifi and Bluetooth work fine. Speed is very good
SIM Access Profile
Hello,
doeas anyone know if Bluetooth SIM Access Profile works with Logout's ROM?
I've read SAP work only with Bluetooth 2.0... doeas anyone know wich bluetoothversion the WM5-ROM's use?
What I found
Hoi Logout
The fastest rom I've ever tried.
I flashed it yesterday and found following issiues:
- Speed-Dial-Button in Phone missing
- The Networkcard-list is corrupt - blank lines between and configuration of them will mess up.
Also activesync-error 85002003, when trying passthrough Laptop to Internet and exchangeserver. This happens often like in Helmi's rom after wifi was used. Perhaps it's a timeout-prob or Issiues with the Comm-Mgr. Error never happens, when BA has been softresetted.
Thank you all for your great efforts to get WM5 working on BAs.
Chris from Zurich
Hopping rain will stop when streetparade is going on
Qtek9090
Helmi_c AKU 3.0 1.1b
there is a way to install Speed Dial?
I love this function
Can't we have a ROM overview like we usually do?
Hi,
first of all sorry for my bad english. I've a big issue for me.
When I receive a phone call, I hear only the last ring. Who calls says to me that the telephone rings a lot but I hear only the last ring and I don't succeed to answer to the hone call, someone has the same issue ?
sorry, but this is a big problem for me, because i use the BA for working.
Is there a solution ?
thx
B
(I 've installed the 1.4b helm's rom.)
Bigbest said:
Hi,
first of all sorry for my bad english. I've a big issue for me.
When I receive a phone call, I hear only the last ring. Who calls says to me that the telephone rings a lot but I hear only the last ring and I don't succeed to answer to the hone call, someone has the same issue ?
sorry, but this is a big problem for me, because i use the BA for working.
Is there a solution ?
thx
B
(I 've installed the 1.4b helm's rom.)
Click to expand...
Click to collapse
I had a problem like this only i did not heat the first ring and when i answered it staid quaiet for a fiew seconds and i solved all with a hard reset.
did you define an MP3 file as your ring tune?
if so this may result some delay, use a wav file as a ring tune, just place it in "RINGS" dir. under windows
Try calling yourself with the (PDA on) & with (PDA off). I think you will notice that there is about 3 seconds/rings delay when the PDA is off.
Also, like the previous poster said, MP3 as ringtone might take a bit longer than .wav file. Try using .wav as ringtone instead.
Thank to all,
i'll try thw solution but i have a wav file like ringtone. I'll put it in windows\ring because, now, it is into "storage card\my documents".
If the PDA is off and there is about 3 seconds/rings delay, is the a solution ? can I leave the pda approached permanently? if yes how I can make?
thanks once again
B
mr_ding said:
Try calling yourself with the (PDA on) & with (PDA off). I think you will notice that there is about 3 seconds/rings delay when the PDA is off.
Also, like the previous poster said, MP3 as ringtone might take a bit longer than .wav file. Try using .wav as ringtone instead.
Click to expand...
Click to collapse
hi,
the solutions don't work !! help.......
Bigbest said:
Thank to all,
i'll try thw solution but i have a wav file like ringtone. I'll put it in windows\ring because, now, it is into "storage card\my documents".
If the PDA is off and there is about 3 seconds/rings delay, is the a solution ? can I leave the pda approached permanently? if yes how I can make?
thanks once again
B
Click to expand...
Click to collapse
pLEASEhELP
Dear all i bought a used SPV M2000 with window mobile 2003SE and i am in india. its good but i want to upgrade the ROM version. The current ROM version showin in phone is:
Operator Version : 5.31.1.162
ROM Version: 1.31.00 WWE
ROM Date: 12/13/04
Radio Version: 1.15.00
Protocol Version: 1337.45
ExtROM Version: 1.31.162 WWE
Mates when i tried to register to O2 site to get rom updates. then it refused that my IME no is already registered.
.
i dont know how i will get the rom update.
I AM NOT A DEVELOPER AND I AM A LAYMAN..PLEASE HELP ME ACCORDINGLY.PLEASE PROVIDE WITH ALL STEP BY STEP INFORMATIO FOR THE CONFIGRATION...
please kindly help me. if someone has the proper link. to some site. so i will upgrade the rom.or if someone has an account. then plz. share in my PM. i promise. after getting my rom. i will give u ur account back. just trust me..
or just send me the links so i can download the rom.
i need the english version.
or you can mail me the details...id is [email protected]
Thanks in Advance...
Click here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
And you'll have lots of ROM updates: latest WM2003, WM5, etc... Just read carefully.
you can not register orange imei to a o2 site
(Please dont post to many questions here, lets keep it simple so that we dont get overflowed with questions probably answered 50 times before in other threads)
Ok, I want us to stick to one post if possible, for tips on how to in.ex make the HTC Home to work on our native languages.
If you have sollutions that works, post it here. (If you find the sollution in another post, give credits, and link to the post)
I found this
http://forum.xda-developers.com/showthread.php?t=316107
Here it explains how to rename the mui files in windows so that the HTC home will work:
I did following
Installed Total commander
I went to windows folder, I selected all files and folders, then properties, unchecked "read only"
Then I renamed
HTCHome.dll.0409.mui -> HTCHome.dll.0414.mui
HTC HDlg.exe.0409.mui ->HTC HDlg.exe.0414.mui
HH_0409_WeatherCities.xml -> HH_0414_WeatherCities.xml
htcbtql.dll.0409.mui -> htcbtql.dll.0414.mui
(0414 is the norwegian countrycode)
then voila, HTC Home on my norwegian wm6
New 26.08 The mfrazzz_CommManager_8button_wizard.cab
This commManager works great and I have no problems at all with it
New 26.08 Tips from fultotop regarding problems with installing the touch dialer in wm6 :
To Install reTouched Dialer you need to :
1. Delete delete this registry key : HKEY_LOCAL_MACHINE\Software\HTC\PhoneCanvas
2. Install Wizard_reTOUCHed_Dialer2.cab
New 26.08 Fultotop have provided a reg fix.
fultotop said:
Import this Registry file in the attached zip & it will fix the black dialer numbers.
Click to expand...
Click to collapse
just import to your registry with a reg edit program (total commander, link provided further up in this post)(see attachments for the reg file)
Great work Fultotop
I will post more about things as I go along..
All the files im posting here are tested and working on my norwegian wm6 HTC P4350
where do i find these codes? for the country?
mm, Its on microsofts website
I dont have the link, but I suppose you can find it by using google
or searching this forum
what country are you from?
Netherlands, Dutch.
I can't find it with Google?
Omg tnx!!! Its working!
I have just downloaded the 10 button comm manager, but my wireless isnt working. Can some post the right device code from the following registry key?
[HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN] = " \\ Windows \\ WLanMgr.exe " "DeviceName" = " {98C5250D-C29A-4985-AE5F-AFE5367E5006} \\ TNETW12511 "
I would be really gratefull!
bio88 said:
Omg tnx!!! Its working!
Click to expand...
Click to collapse
What is the dutch country code?
0413. Good luck!
bio88 said:
0413. Good luck!
Click to expand...
Click to collapse
Thank you!
bio88 said:
I have just downloaded the 10 button comm manager, but my wireless isnt working. Can some post the right device code from the following registry key?
[HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN] = " \\ Windows \\ WLanMgr.exe " "DeviceName" = " {98C5250D-C29A-4985-AE5F-AFE5367E5006} \\ TNETW12511 "
I would be really gratefull!
Click to expand...
Click to collapse
I can't even install the 10 button comm manager, not enough rights?
Anything I can do about that?
Now, thats weird. I could install it without any problems. Just accept any security warning and install it to the device. Don't know any more ways to "fix" it?
Which one did you install?
Do you have a link to it?
http://forum.xda-developers.com/showthread.php?t=320239
that one
Doh!
I forgot i had my cable attached to my Herald, thus enabling comm manager, thus not installing.
With no cable attached installed perfectly.
Could you please please please look at that registry entry for me? I need it for my WiFi button to work
I installed this and changed the codes to 041D (Swedish) and my Herald wouldnt boot again.. I had to reflash it with the Wm6 RUU.
RSkillz said:
I can't even install the 10 button comm manager, not enough rights?
Anything I can do about that?
Click to expand...
Click to collapse
u need to kill Comm Manager before u install it. If Comm Manager is still running in the background, itll give u that error. Close it properly first.
Btw the 9 button with 3g comm manager seems to be working fine. Wlan works on my herald (htc wm6)
8 Button Comm Manager with working wifi
If you don't want the Comm Manager with 3G use this one here.
Updating my first post
I'm using these cabs for HTC home on my P4350.
Five Tab HTC Home
HTC.Kaiser.Home.Eng.0409.5Tab.schen.N2A_WeatherPatched.cab
Six Tab HTC Home
HTC.Kaiser.Home.Eng.0409.6Tab.schen.N2A_WeatherPatched.cab
More info here.
I've tried the Wizard_reTOUCHed_Dialer2.cab for the new dialer, but could get it to display correctly, but it uninstalled fine.
I have searched for list of registry keys in the manila folder . Somehow I accidentally deleted some of them .The ones I need are the ones having to do with the weather. Any help would be appreciated.
Could you please elaborate a bit more, like for instance list the registry hive you refering to and which version manila / rom. I could make you an export of my registry if you say which hive but without more info it's hard to provide much help.
wmh said:
Could you please elaborate a bit more, like for instance list the registry hive you refering to and which version manila / rom. I could make you an export of my registry if you say which hive but without more info it's hard to provide much help.
Click to expand...
Click to collapse
HKEY_Current_User\Software\HTC\Manila\ ? Everything that is listed for weather. Some how is was deleted
Okies then,
Here's an export of the mentioned key of my registry, it indeed contains some settings related to weather:
Code:
"Weather_Focus"="United Kingdom"
"Weather.PostFirstRun"=dword:00000001
"Weather.CurrentCity"=dword:00000000
"Weather.CityList"="ASI|TW|TW018|TAIPEI,EUR|ES|SP008|BARCELONA,EUR|UK|UK001|LONDON,NAM|US|WA|SEATTLE,EUR|FR|FR012|PARIS,ASI|JP|JA041|TOKYO"
I'm currently running Dutty's WinMo 6.5 R4 rom so you might wanna check if you can directly import my reg file. It would be savest to delete the lines you dont want to import. To import download the attached manila.txt and rename to manila.reg, then import with an app that can like registry editor or total commander. Obviously you can edit the values in a text editor before importing if you want, this is the default this rom comes with.
Good Luck, hope this helps fix your problem.
/WMH
Thanks for the reply ,but I think the registry is different from rom to rom . Im running Duttys 3.9 turbo . It has an extra line starting with barcelona , london , seattle , paris , tokyo
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
1st pack (Dialer and deps) http://www.multiupload.com/YQGEDIMWJD
HTCScroll_2_0_19221326_00
Video_Telephony_2_5_35575_0
Shared_Modules_1_01_19221333_00
HTCFramework_1_5_19223320_00
Volume_Control_2_2_20113221_00
Contact_Picker_1_0_20113132_00
HTCFont_Link_1_0_19132133_1
Contact_Utility_Engine_1_2_20113727_00
Concurrence_Mgr_1_5_19221227_00
Resource_Proxy_1_0_19221124_00
SharedResource_1_0_20111720_00
Phone_Canvas_Enhancement_4_2_51720111829_0
New_Contact_Card_1_1_20113729_0
2'nd pack http://www.multiupload.com/1D9Z6NCUJK
Manila_2_1_19193517_0
3'rd pack http://www.multiupload.com/R1BXPVJFQV
Album_3_2_20113921_0
CommManager_2_9_U_0 with 12 functios
INSTALATION INSTRUCTIONS
1.Copy files to windows folder
2.import registry with your preferate reg editor
3.REBOOT AFTER INSTALL
you can also delete panel manager and stop slideview to get sime speed
go...go...go...jer.
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I've got a X2 fromm vodafone and is unsoportable. We're waiting for your work.
jerpelea said:
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
Click to expand...
Click to collapse
The best news recently!
I have "tasted" the 6.5.2 update of X2 in some phase, I really liked it. I'm sure the 6.5.3 update combined with manila will make X2 to become the most comfortable gadget for my personal needs.
Many thanks for your efforts jerpela!
Great news, highly appreciated!
phone dialer ported
i will upload it tomorow
uploaded manila with split languages
copy only manila and your language to windows folder
inport registry with your favourite reg editor
landscape is enabled
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Giland said:
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Click to expand...
Click to collapse
for any other file than english you need to rename all 409 files to your country code
this will display english mesages !!!
if you want native language you have to translate yourself
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
bazsikar said:
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
Click to expand...
Click to collapse
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
jerpelea said:
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
Click to expand...
Click to collapse
2nd option worked, thanks! Now testing.
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
ndjorovic said:
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
Click to expand...
Click to collapse
Try to install these.
The bkinking still occurs after pushing slide view key once or twice.
I have other issues also but before sharing them maybe I should try patch.reg but it doesn't work.
Error message comes "line 302 - unsupported DirID 1" (HKCR) and line 234 in HKLM.
Besides it's very good feeling to have manila on X2. Now I won't feel to change back to X1 every now and then.
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
marcuchinonis said:
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
Click to expand...
Click to collapse
First I had to uninstall some apps when i tried it before hard reset. I don't know if you use SE User Guide (it's 4-5MB) or pixel city panels.
I am not an expert at all either, only trying to discover registry things, just managed to make the attached 2 cabs of jerpelea's all.reg and manila.reg and manila works after installing them.
I encountered some problems in the People tab.
When I click the All People button Manila restarts, the same thing happened when I click Updates & Events in a contact...
Is there any way to solve this?
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
ndjorovic said:
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
Click to expand...
Click to collapse
you need to copy all packages and install regs
not just 2