Related
Hi everyone!
I would like to know which one of the ROMS for X8 is the best in performance for dailly tasks. Because i have tested 3 ROMs and none of have good battery perfomance on a daily basis.
What ROM should I try? Thanks for all your answers. Take care!
Luescoff said:
Hi everyone!
I would like to know which one of the ROMS for X8 is the best in performance for dailly tasks. Because i have tested 3 ROMs and none of have good battery perfomance on a daily basis.
What ROM should I try? Thanks for all your answers. Take care!
Click to expand...
Click to collapse
I find gdx v20 best for day 2 day use
Sent from my MOLEY_X8 using xda premium
for me..
and hightly recomment is GingerDX v20
and when you know after reading thread by thread you can match with kernel
linuxDX, or Alfs kernel, or nAa kernel...
it can simply make your device faster and smootherst
but beware if you new on kernel
(make sure your know what are U doing when playing with kernel and unlock bootloader)
because it can brick you phone!
and then I sure after this you will screaming here and asking how to save your bricked phone!!
here the answer use SEUS
gingerdxv20 for sure
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
tohno said:
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
Click to expand...
Click to collapse
what apps that keep crash on ur droid?? i had no problem at all with gingerdxv20 rom..
tohno said:
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
Click to expand...
Click to collapse
U have to follow installation properly
make sure install GDX with CWM instead Xrecovery
and fullwipe..
or maybe your device 'special' same like my friend phone
(when I flashing GDX 20 and GDX v19 on his phone)
I found this problem = sdcard no show
but when in recovery = all files and folder prety there
and I have no idea why....
Gx with custom kernal no lag 8 day use
Sent from my E15a using XDA App
CWM? whats that?? i only had xrevocery no CWM ..is it like xrecovery where u click back when you see SE ?
No you need tap on the screen,also you need to have installed.
Sent from my XPERIA X8 using Tapatalk
froyopro incase of daily tasks and battery performance
for me gingerdx v20 is the best rom for x8 super fast and no lag
tohno said:
CWM? whats that?? i only had xrevocery no CWM ..is it like xrecovery where u click back when you see SE ?
Click to expand...
Click to collapse
when u reboot..
press volume down key or/and tap screen (when u see SE white logo)
u'll see CWM recovery and install GDX by this way
or if u can get into CWM th8 mean U don't have CWM
so install dual recovery.zip first (u can use search button)
or install other rom which one have dual recovery pre install
sorry long explaination
and hit thanks button twice!
thanks! (thanked already )
so in summary ...
open xrecovery and find CWM
if CWM is missing then go donwload it...
is cwm same with xrecovery?or is it and extension?
then use cwm and install the mod instead of xrecovery (do i need to system wipe?)
reboot phone then done?
hmmm just wondering will my link2sd apps will stay?
does it have anything to do with busybox? according to dotsen i must not update busybox
Few days ago i've installed gingerxperia v21. the wifi works fine, but today it doesn't find any wifi. What should I do?
Use Alf v005
if still error re install your ginger DX
make sure you will Full wipe
when you still get error after u install your Ginger Dx\
Factory data reset
Is there any ROM better then the Ginger Xperia V21....?
im also using the same....but its so slow....(im using it on STOK KERNEL)...
bishnuchetri25 said:
Is there any ROM better then the Ginger Xperia V21....?
im also using the same....but its so slow....(im using it on STOK KERNEL)...
Click to expand...
Click to collapse
I suggest you the XGin 6.1, tha only bug what i found its the reboot, you cannot reboot to CWM from reboot menu, but if you tap the screen you can enter into it!
:S
neilpatrick0 said:
Use Alf v005
if still error re install your ginger DX
make sure you will Full wipe
when you still get error after u install your Ginger Dx\
Factory data reset
Click to expand...
Click to collapse
The OP can't reinstall his ginger DX because he clearly said GINGERXPERIA
-----------------------------------------------------------------------------------------------------
bishnuchetri25 said:
Is there any ROM better then the Ginger Xperia V21....?
im also using the same....but its so slow....(im using it on STOK KERNEL)...
Click to expand...
Click to collapse
You should try STORMIX V2.2.0 or CM-X V1.1 , this ROMs works great with stock kernel, I tried both and everything is fine, fast, and the framework is most cute than GingerXperia.
If I helped you... HIT THE THANKS BUTTON!
Okay , it's been hours , and I found nothing fruitful.
I just want a stable ROM on my X8 , and get rid of my Eclair.
I want Froyo , not gingerbread.
My device is rooted , Got backups with Xrecovery. I have Stock kernal
Firstly , Gingerdx v021 had a buggy messaging application , and I removed it.
Froyobread resulted into a boot loop on my device (Recovered now using PCC)
And , I'm not able to find a clean version of Floyo 1.0 . I downloaded from two sources , and got different errors. (once a missing file , and second time a MD5 error).
Is there any genuine file for Floyo 1.0 , which is 100%working, if you suggest that ? Or is there anything much better ? Download links for those will be appreciated.
I dont wish to change my kernal , and want a very stable/smooth ROM , and highly preferable choice is froyo , since it would be more stable.
Somebody Please Help !!
Well . I'm using Minicm6 , which is 2.2.1 froyo, and I like it very much. Very responsive touchscreen, nice performance, good battery life, and... STABILITY! I've never experienced force close with this rom.
-Sentrax.
Mayank77 said:
Okay , it's been hours , and I found nothing fruitful.
I just want a stable ROM on my X8 , and get rid of my Eclair.
I want Froyo , not gingerbread.
My device is rooted , Got backups with Xrecovery. I have Stock kernal
Firstly , Gingerdx v021 had a buggy messaging application , and I removed it.
Froyobread resulted into a boot loop on my device (Recovered now using PCC)
And , I'm not able to find a clean version of Floyo 1.0 . I downloaded from two sources , and got different errors. (once a missing file , and second time a MD5 error).
Is there any genuine file for Floyo 1.0 , which is 100%working, if you suggest that ? Or is there anything much better ? Download links for those will be appreciated.
I dont wish to change my kernal , and want a very stable/smooth ROM , and highly preferable choice is froyo , since it would be more stable.
Somebody Please Help !!
Click to expand...
Click to collapse
try froyopro v1.1 http://forum.xda-developers.com/showthread.php?t=1332836
proved stable for me
now i must test all froyo roms on stock kernel and ill tell you which is better
Sent from my E15i using xda premium
Try Froyopro 1.1 by Xda-rk its very stable and good rom for battery and performance...
but if you dont want unlock bootloader and you want gingerbread rom (stabble/smooth) try gingerxperia v21 on stock kernel
Sent from my E15i using xda premium
dsaklein said:
Try Froyopro 1.1 by Xda-rk its very stable and good rom for battery and performance...
Click to expand...
Click to collapse
+1 v1.1's better
Froyopro 1.1 using Xrecovery
kirmada said:
try froyopro v1.1 http://forum.xda-developers.com/showthread.php?t=1332836
proved stable for me
Click to expand...
Click to collapse
Can I install Froyopro 1.1 via Xrecovery ? Or do I necessarily need clockworkmmod recovery ?
Any known bugs (except auto-brightness) which you faced ?
kirmada said:
+1 v1.1's better
Click to expand...
Click to collapse
its a great rom im using it since it released and im more than satisfied with it, althought there is FroyoPro 2.2 but from different developer (he based his rom on v1.1)but i havent try it alot so ican tell you for sure about it
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
Mayank77 said:
Can I install Froyopro 1.1 via Xrecovery ? Or do I necessarily need clockworkmmod recovery ?
Any known bugs (except auto-brightness) which you faced ?
Click to expand...
Click to collapse
Yes you can and you should, because if you install via cwm you will get some errors....brightness is not bug its just dont work..., but everithing else work great
Mayank77 said:
Can I install Froyopro 1.1 via Xrecovery ? Or do I necessarily need clockworkmmod recovery ?
Any known bugs (except auto-brightness) which you faced ?
Click to expand...
Click to collapse
yes use xrecovery,well in froyopro i didnt find any bug which wud frustrate the hell outta me
and frankly auto brightness whether works or not is not a problem to cos why set auto when i can set it manually according to my need
besides dat i find it ok for daily use
Thanks Everyone
Froyo Pro v1.1 Works Great on my device.
Thanks to everyone for their valuable views.
Mayank77 said:
Froyo Pro v1.1 Works Great on my device.
Thanks to everyone for their valuable views.
Click to expand...
Click to collapse
glad u liked it,enjoy
i rooted my xperia x8 and install link2sd after i setup x recovery and make sure it's installed i reeboted my phone but it's not responding it stops wroking after sony erricson welcome message not the white which u began to press back button but after it
It's a soft brick. Use PCC/SEUS
You should press the back button before the logo multiple time until the logo come out.
Then after you got to the recovery .
Do a full wipe or factory reset using recovery.
Pls. press thanks if I helped!
froyo 2.2
thanks i managed to use xrecovery and i have installed froyo 2.2 v1 and it works ok but when i log onto internet through wifi android market updated became oogle play store and everytime i used appear with a message force close and even any prog i update show with a message force close what is the issue or what is the best rom for my experia x8... anyone help plllllz
I think PrimeHD 6.0 With alfs 8 is the best
PrimeHD 6.0 works with stock nAa alfs and LinuxDX kernel
Sent from my E15i using xda premium
?
how i can install it on phone
Using Cwn or xrecovery
Sent from my E15i using xda premium
Minicm7
love_story99000 said:
thanks i managed to use xrecovery and i have installed froyo 2.2 v1 and it works ok but when i log onto internet through wifi android market updated became oogle play store and everytime i used appear with a message force close and even any prog i update show with a message force close what is the issue or what is the best rom for my experia x8... anyone help plllllz
Click to expand...
Click to collapse
Minicm7 With nAa-11 Kernel is the best. Before Fully Working CM9 Release From Paul-xxx. Check it out here. Minicm7-nobodyAtall.
And Here Thread For All ROMs, Kernels, Modules, Basebands, Recoveries, Tools, Mods, Thanks to Lucastan96.
miui gb is better,i think the link is in my signature.rom is stable,and everything works(only video recorder needs to be fixed)
Sent from my E15a using XDA
Hello there, i have a problem with gingerDx v29, im using v28 atm with alfs v09a, so far so good, but when i instal v29 i get a com.android.phone error as soon as i put the ping and then the error keeps looping. i tryed re-instal, wipe data, (wipe everything that i could with CMW actualy) but it still doesnt work, i read the forum in order to find an answer but didnt find it with this SO, (also tryed a solution that seams to work in others so like fix permisions). How do i solve this?
I really hate to bother but its been 5 days and i can make it work.
Thanks in advance!
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
update Ginger DX v29
Hello i am a new user asking about the update of DX v29. i recently purchased X8 having
Configuration .
Model no E15i ,
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
it worked!
playjun said:
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
Click to expand...
Click to collapse
thanks man, that was the problem, i cant belive i didnt saw that, thanks a lot
And for the guy asking a guide this is what i did:
download the alfs v09a kernel right in the rom page
download the rom
download the libsensor patch
download the addon
put the rom, the libsensor patch and the addon in ur sd card
flash the kernel
start in cwm
go to instal zip option, instal the rom, the libsensor and the addon
restart
enjoy
i just did it and its working fine but im finding a strange bug though, my screen seams to be moving a little bit to the left everytime :X
when i fix it i let you know how xD
Thanks again to playjun _o_
(Q) overclock in GingerDX V29 dont work?
Hi, I was trying to place GingerDX v29 overclock and does not work, any suggestions?
sorry my english,
problem
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Answer
terrordroid said:
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Click to expand...
Click to collapse
open it by touching the screen on the Sony Ericsson logo.
GingerDX v029 version selection help
First of all thanx to all
by reading a lot of stuff in this forum .successfully root the phone and install xrecovery and its working .
but i have some confusion about the
[
1 .GingerDX-v029-shakira-stock.zip GingerDX v029 nAa/alfs
2. GingerDX-v029-robyn.zip GingerDX v029 for robyn
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
The confusion is which one is for my xperia X8 .
Please help me for this My xperia configuration is
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
Hey man... ur x8 also knwn as shakira... use that rom
Sent from my X8 using xda app-developers app
stone009 said:
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
Click to expand...
Click to collapse
get the number 3 (i think your still in lock bootloader) and dont forget the addons.and read the standard procedure.goodluck
sent from my x8™ using gingerDX®
The diferent versions are for diferent kernels, for example im using Alfs kernel so i instal the number 1, i think u still using stock kernel so instal the stock one, the number 3
if you have any problems you can allways find the default rom and flash it back or try another one
Good luck
need help
(3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2 is for my x8 .
do i need the update Kernel version ?
or its work on my original configuration as below
My xperia X8 configuration is
Rooted by Superoneclick.
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
get that number 3
and addon( standard settings for stock and superuser ) and read some fix in the thread...
opps your on 11w22?
read a bit about unlocking bootloader.
sent from my x8™ using gingerDX®
alfs v9a
im having a little screen moving problem, i think its the kernel alfs v9a, i'll try v8 and let you know
Edit; Alfs v8a solves the problem
Hey guys i'm having the same problem with the screen moving bug, it moves to the right a little bit. I tried alfs v8 and it solved the problem but I still don't think it's the best answer since the combo gdx v29 and alfs v8 has A LOT of battery drain on 3g and sync on (in 8 hours it drains 90 percent of the battery just in standby).
Is there any other thing I can do to fix this screen problem? If not i'll just go back to stock kernel
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
cascabel said:
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
Click to expand...
Click to collapse
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Sorry. I meant 691.
Sent from my rooted tomato using xda app
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Try other frequencies
Sent from my X8 using xda premium