Database Develop

Flashing through USB and NOT SD card Question...

Hi guys, I am having trouble flashing with SD card and want to flash back to my original rom. My X1a is not reading my .nbh file even after hours of trying to read up on it and reformatting etc. Is there a way i can do it through activesynce instead like installing Hardspl? I know its more risky but I have no other choice! Please kindly help me! Thank you!

well ull need to go back to stock SPL FIRST!
then use the RUU UTILITY in the rom forums..
i have never had a problem with it.. works great for me.. are you getting any kind of error?

killerskincanoe said:
well ull need to go back to stock SPL FIRST
Click to expand...
Click to collapse
He must restore stock rom first and restore stock SPL only after!!!
This RUU always works for me:
-extract the folder
-put your nbh file in the folder
-sync your phone
-run RUU

Thanks guys, I'll give it a try!

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...

Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799

drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways

error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck

DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho

error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...

DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl

error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps

DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here

Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.

ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...

Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.

NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server

http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help

error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers

circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks

DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update

error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection

1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL

kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

[Q] I have a question, help me

I have a problem with my device and around the web I can not find much support for it.
Please help me. I have an HTC HD7 t-mobile and I want to update it to NoDo European version. How can I do?
thank you

can someone help me?

up help me please =)

filoman said:
up help me please =)
Click to expand...
Click to collapse
What help do you want??

just install zune sofware on your pc, plug in your mobile phone ,ones your phone is detected. it will take you tru the update and installation.
thats how i got mine, london.

NoDo update
download and run and zune software on you pc, connect your hd7 phone to your pc once the system dictates your phone, it will take you tru the update and installation process. thats how i did mine in london t-mobile....

Guys, I think he has a US T-mobile HD7 and he wants the Euro ROM on it instead of the US one that the Zune might be detecting as soon as he plugs it in.
The only advice I can ask you to try is to first rollback to your previous restore point that Zune allows, and then use the process to debramd the device, via one of the threads in the stickies. Then download the Euro ROM of your choice and flash it via the bootloader mode.
The easiest way is, get a Euro device and sell this. LOL.
Sent from my HD7 using XDA Windows Phone 7 App

Head over to the HD7 Development section. Follow the instruction for unbranding your phone. Once you have the unbranded ROM flashed you can push through the unbranded NoDo ROM.
Beware though, M$ has put out some notices about "jailbroken" devices and their ability to update in the future. Not saying its going to affect anything, just always good to read before jumping in. The more you know...

thanks for the replies, my problem is that I don't also know how unbranding my phone. I only know that my CV is 531.
can you link me please?

[Q] AT&T HD7 update issues

I have an AT&T branded HD7 (it says HTC T9295 in Zune) which I'm trying to update. I think the phone was originally a pre-release handset and the OS version is 7.0.7348. I can copy and paste so perhaps this is pre-NoDo build? Anyway, trying to update to NoDo and beyond - the phone plus Zune is telling me that an update (7392) is available. Zune is allowing me to get right to the last step of the update process before giving me a 80180048 error. I've tried the Windows Phone Support tool but get "The tool cannot recover this phone. Please contact technical support." Any help would be greatly appreciated!

you could 'start from scratch' and just flash the stock Shipped ROM...
the stock Shipped ROM is already NoDo. Shipped ROM link in my signature.
sh4d0w86.

Ah many thanks I'll give it a go now!

dedhandi said:
Ah many thanks I'll give it a go now!
Click to expand...
Click to collapse
welcome.
sh4d0w86.

Worked like a dream, cheers!

question

can i take the built in sd card out of my hd put it in my sd card reader and put nodo or any win7 os onit and then put t in my phone and boot up just wondering isit possible

messdup said:
can i take the built in sd card out of my hd7 put it in my sd card reader and put nodo or any win7 os onit and then put t in my phone and boot up just wondering isit possible
Click to expand...
Click to collapse
edit for typo

no, this wouldn't work. not even sure why one would even want to do this...

sh4d0w86 said:
no, this wouldn't work. not even sure why one would even want to do this...i unlpugged my hd7 during restoring through zune due to lost contacts and it was easier to restore than type them all back in anyway i unplugged it and now it wont boot past htc splash screen
Click to expand...
Click to collapse

looks like you have to start all over again.
put phone into bootloader...check which verision you have ... then reinstall custom rom
cheers
happy new year and have a gr8 day

jhonny said:
looks like you have to start all over again.
put phone into bootloader...check which verision you have ... then reinstall custom rom
cheers
happy new year and have a gr8 day
Click to expand...
Click to collapse
happy new year to u dude but i got spl 5 so the whole problem with that makes things harder any ideas

there is a couple of ways mentioned here.
put phone into bootloader and install stock standard nodo rom. that will downgrade your hspl. there is a thread ....how to downgrade hspl with more detail.
just follow the instructions. once u have downgraded then you can install cotulla hspl and after that the custom rom
cheers

messdup said:
sh4d0w86 said:
i unlpugged my hd7 during restoring through zune due to lost contacts and it was easier to restore than type them all back in anyway
Click to expand...
Click to collapse
add your contacts to your Windows Live account, will sync your contacts to your device automatically.
messdup said:
happy new year to u dude but i got spl 5 so the whole problem with that makes things harder any ideas
Click to expand...
Click to collapse
if you have a Europe device, see here.
if you have a Zune back-up of NoDo, see here.
else try here.
if successfully downgraded Bootloader 5.xx, see here to XSPL.
Click to expand...
Click to collapse

sh4d0w86 said:
messdup said:
add your contacts to your Windows Live account, will sync your contacts to your device automatically.
if you have a Europe device, see here.
if you have a Zune back-up of NoDo, see here.
else try here.
if successfully downgraded Bootloader 5.xx, see here to XSPL.
Click to expand...
Click to collapse
thanks for the help guys but how do i change spl 5 when i cant get past htc logo and bootloader screen doesnt give me serial/usb so how will i install custom roms
Click to expand...
Click to collapse

messdup said:
thanks for the help guys but how do i change spl 5 when i cant get past htc logo and bootloader screen doesnt give me serial/usb so how will i install custom roms
Click to expand...
Click to collapse
jtag would be your guaranteed solution to your problem. here. riffbox is a popular choice.