Hi guys,
I trying to help a freind out, who have messed up hes 2x. He triede to flash a new kernel (he cant rember what he did). Now the problem is:
The phone is stuck in recovery boot loop, and when he/we tries to flash a new rom from sd, the phone cant find the sd-card.
One more thing is, when we connects the phone to a computer, nothing happens.
I had the same problem problem with my Desire S, and it was fixed (after some tried) with a RUU.
I new to the 2x, and coudnt find a threat that combined my 2 (i hope the connection problem will be fixed, when the firste 2 is solved) problems.
Hope you guys can help, or point me to the right place.
Regards,
Safi
Safidk said:
Hi guys,
I trying to help a freind out, who have messed up hes 2x. He triede to flash a new kernel (he cant rember what he did). Now the problem is:
The phone is stuck in recovery boot loop, and when he/we tries to flash a new rom from sd, the phone cant find the sd-card.
One more thing is, when we connects the phone to a computer, nothing happens.
I had the same problem problem with my Desire S, and it was fixed (after some tried) with a RUU.
I new to the 2x, and coudnt find a threat that combined my 2 (i hope the connection problem will be fixed, when the firste 2 is solved) problems.
Hope you guys can help, or point me to the right place.
Regards,
Safi
Click to expand...
Click to collapse
From what i understand, his device is rooted...so try going to the recovery mode...
switch off the mobile phone, then hold the power and volume button...both at the same time, until u see the LG screen and then u can enter the clockworkmod mode....go to the factory reset by using the volume up/down key and use the power key to select...u will lose all the data...after it is done...reboot using the same combination.
I hope it helps
if it was only that simple!
Yes the phone is rooted.. as i said in the first post, the problem is that i cant flash another room to solv the problem. When i try to flash from zip, the phone cant find the sd card.. and i cant put a rom on the phone, cause windows cant find the phone...
He should try to install this:
http://forum.xda-developers.com/showthread.php?t=1098745
Through ADB, choosing external install.
Related
Hi everyone.
Ive got a MAJOR Problem here.
My Cell Phone doesnt start at all.
If i put it one the USB Cable it can Start up like 5 Seconds.
Then it Reboots and Reboots again and again by 5 Seconds.
If I Disconnect the Phone from USB screen turns Black Immediately...
I thought it could be the Batterie... but.. it worked just fine yesterday..
(have i Mentioned that this weird Sticker on it turned red..? Some kind of sign saying me it got wet?)
All this started as i got a Coloured screnn with saying ´´Serial´´ @ the bottom of the Screnn... just exact like the Flash Screen
I Flashed the Rom which is on the Internal Storage i put bevor. To bad it aint the Stock ROM!
Then i also tried Hard Reset.
But everytime i boot... i only get as far as 5 Seconds.
Is there any Chance to Flash this Baby with original ROM (Stock ROM, RADIO and SPL)
I want to send that Baby in... but if they find out i Flashed it... i wont get any Warranty... ;(
So PLEASE GIVE ME ANY ADVICES!!!!!
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
krisztian b said:
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
Click to expand...
Click to collapse
You only can Flash if u got a Active Sync connection.
So ... Cell cant boot... i cant flash...
HELP
Just go into bootloader mode (you have Hard SPL installed right?) by booting up the phone while holding down the volume down key. Then connect it to the pc with the USB cable and run the CustomRUU to flash another rom. Should work! Else you should try to MTTY (that solves the resetting stuff right?).
I was just about to say to try to get Diamond into bootloader mode manually. http://forum.xda-developers.com/showthread.php?t=405659
MTTY wont work... cause i cant boot at all
But THX for your help flashing it back to Original...
This Thread can be closed
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
the 200 dpi setting does not work on the Thrill, which is why you are stuck in "bootloop"
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Well looks like you're kinda screwed since you don't have clockwork installed, I'm not sure if you can install a new ROM... but have you tried EVERYTHING in android recovery?
If you don't know how to get to recovery... it's Hold down volume key + 3d + power, until it vibrates then use arrow keys to move around and 3d to select if you dont have clockwork...
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Do you havet the emergency mode like most LG smartphones?Here is how you check pull out the battery and the plug it in(so your phone turns off) and then hold down the volume up +voulume down and power button if it worked you should see a yellow screen and a "Emergency mode!!" title.Then google for a kdz update tool and a kdz firmware for YOUR phone.You will also need the LG mobile united drivers.If you are on windows go to control panel and disable the lg modem.Then connect your phone(in emergency mode) to the computer open the update tool then click on select KDZ and navigate to your KDZ then in phone mode select emergency_something iys the only one.Than click flash KDZ and after about 5min your phone should reboot and it wilk work.Its importiant to note that you will lose everything on your phones memory its like you flash a rom you start out fresh you also loose root.Good luck!
Sent from my LG-P350 using XDA premium
faresr said:
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
About the ADB it shows "device not found" because you didn't enable usb debugging.
Sent from my LG-P350 using XDA premium
Your gonna need to flash the .bin file for the thill
Thrill 4g on O3D
https://rapidshare.com/#!download|2...391931|R~E48599C3AAD1D44505C904C6E6A52A13|0|0
Thrill 4g on O3D
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
hoskopico said:
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
Click to expand...
Click to collapse
Ok thx I didn't know that it was different sorry if i made any confusion
Sent from my LG-P350 using XDA premium
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Try the installing gingerbread and back to stock thread i think its in the mediafire download on there
Thrill 4g on O3D
I don't think i have the emergency download mode... I tried the button combination but it didn't work... so I still can't get my computer to recognize my phone to do anything...
Or try flashing a kdz for p920 then do the bin flash to get it back to stock froyo cuz you have to install the driver with phone pluged in and recognized
Thrill 4g on O3D
hoskopico said:
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Click to expand...
Click to collapse
I know what you mean LG doesn't really care about mine device too.It's like they are nice untill you buy their phone.After that they don't care.
Sent from my LG-P350 using XDA premium
http://www.danasoft.com/ sig/****yeah287168.jpg
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
tbcxfallen said:
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
Click to expand...
Click to collapse
You don't have clockwork then.That is your stock recovery.I had this problem too.I flashed the wrong recovery and i got stuck on the LG logo.I fixed it using fastboot flasher idk is it the same combination but on my phone it is volume up+call+power button.Uf it is correct you should see a sign saying fastboot mode udc_start or something like that then use the fastboot flasher to flash a recovery image for your phone.After the flash is complete reboot your phone but first do a NORMAL boot so you can see if the problem is solved.If it worked then you can safely boot into recovery.
Sent from my LG-P350 using XDA premium
Thank you for your support guys, but as it was to difficult, I just got a new one from at&t
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
cwburns32 said:
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
Click to expand...
Click to collapse
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
nerot said:
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
Click to expand...
Click to collapse
I rooted phone, everything fine. I flashed CWM, everything fine. When I rebooted system from CWM then phone booted but hung at the LG logo. Now only thing I can do is boot into recovery or boot to the LG logo for hours... Don't even know how this could have happened as I haven't flashed anything, just root and CWM...
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
If u can access download mode than its not bricked download a stock rom flash it.....
sent from my GT-I9000 using xda premium
this is where I get stuck
http ://img706[DOT]imageshack[DOT]us/img706/8782/30950752[DOT]jpeg , sorry for the lame link I can't post outgoing links yet.
i have no idea what odin version to use or which one works, what ROM to use , all those files are from different sources i dont tink that's right
dualzo said:
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
Click to expand...
Click to collapse
use Kies recovery procedure http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
Flash a i9001 rom using odin
so I've been trying for 5 hours to fix my semi-bricked phone and I can't do anything .... I've tried with odin 4.43 and some stock ROM-s ... but it gets stuck ... god damn it what should I do , i have no warranty ... GSM service , do they know how to fix things like these? it seems complicated
http[dots]//img18[dot]imageshack.us/img18/6763/96005243[dot]jpg ---> i get stuck with odin here
L.E
So I finally managed to fix it with AiresVE.ops , MultiLoader Odin v.4.43 and an official ROM from sammobile , it took 8 minutes but I had to do it on my laptop. Thanks for everything guys.
Hi,
some time ago i got the same problem But don't worry it's easy to solve..
Just download this one:
http://forum.xda-developers.com/showthread.php?t=1694617
and download this one to get a stock rom:
http://forum.xda-developers.com/showthread.php?t=1032437
or i recommend the broodrom which is based on the valuepack an works just flawless on my i9001
http://forum.xda-developers.com/showthread.php?t=1696381
then copy both .zips to your external sd and then boot into recovery (press vol+ and power button.. wait 3-5sec and release.. when the android thing & a box appears press and hold the home button (the left touchbutton))
if you're now in the recovery mode, click on "install update via zip" or something like that..
then you navigate to your external sd where the 2 files are
then you install the teamwinrecovery (zip file) after that you shutdown your system (pull the battery^^)
then boot again into recovery and you will see a new recovery (it's the teamwinrecovery)
this can be controlled with your touchscreen
now you click again on "install update via zip" or something like that an navigate again to your external sd..
for that you should navigate on the tip level and open a folder called "emmc"
There you install the other zip (it's your rom) an wait until it's finished
it will reboot automatically
If you get stuck in a recovery loop you should flash the bootloader with odin.. (instructions are given in the teamwinrecovery thread)
Good Luck and sorry for my horrible English
You can send me a pm if you have questions
hi,
im new here and i hope im not breaking any rules
i got htc sxl with android 2.3.5 and i see many 4.x.x roms here for this phone.
but i cant understand how to flash it.
most of them say to put the ROM on the sd card and boot the phone in recovery mode and start it. and so on..
BUT i dont have an SD CARD slot.
is there any program that i can flash my phone via pc? like theres RKbactch tool for rk cpus, livesuit for allwinner, etc..
*cuz my power button is broken, im asking i can flash a rom via pc, and configure, lets say vol button to wake phone up.*
thanx in advance!
Jenezio said:
hi,
im new here and i hope im not breaking any rules
i got htc sxl with android 2.3.5 and i see many 4.x.x roms here for this phone.
but i cant understand how to flash it.
most of them say to put the ROM on the sd card and boot the phone in recovery mode and start it. and so on..
BUT i dont have an SD CARD slot.
is there any program that i can flash my phone via pc? like theres RKbactch tool for rk cpus, livesuit for allwinner, etc..
*cuz my power button is broken, im asking i can flash a rom via pc, and configure, lets say vol button to wake phone up.*
thanx in advance!
Click to expand...
Click to collapse
i managed to overcome this problem myself. since no1 wanna help ?
but i got another and more serious problem: i think i bricked my phone
ill open a new thread
Jenezio said:
i managed to overcome this problem myself. since no1 wanna help ?
but i got another and more serious problem: i think i bricked my phone
ill open a new thread
Click to expand...
Click to collapse
Hi,
You mentioned your power button is broken and you bricked your phone. please tell me how you fixed it?
I have broken volume down key so I can't boot bootloader.
Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english
Tix0mir said:
Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english
Click to expand...
Click to collapse
Sadly, you are not alone with this problem. My experience was similar to yours. I solved it by throwing the phone away and buying another. Unfortunately, my second P7 has faulty flash memory and is almost useless. I'm now awaiting the delivery of my third P7. I suggest you buy another and avoid EMUI 3.0. Good luck!
arthios said:
Sadly, you are not alone with this problem. My experience was similar to yours. I solved it by throwing the phone away and buying another. Unfortunately, my second P7 has faulty flash memory and is almost useless. I'm now awaiting the delivery of my third P7. I suggest you buy another and avoid EMUI 3.0. Good luck!
Click to expand...
Click to collapse
Most easily to buy another ... but its not a solution The phone working good, but the problem means i forever must be with those beta emui 3 rom Before i had p6 and i re-flash it may be 20 times and there was no problem ,a those .. p7 full rubbish )) Thanks for your answer
Tix0mir said:
Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english
Click to expand...
Click to collapse
A question? How can you do factory reset through settings when you have a bricked phone? I find this very strange!
If by any chance you still can load the OS, get the quickboot app in the market. It will get you to fastboot and than maybe you can install recovery.
All in all, I still don't understand, is your device bricked (can't load OS, just constant reboots - loops), or you just can' downgrade to EMUI 2.3!
Good luck
ibeqa said:
A question? How can you do factory reset through settings when you have a bricked phone? I find this very strange!
If by any chance you still can load the OS, get the quickboot app in the market. It will get you to fastboot and than maybe you can install recovery.
All in all, I still don't understand, is your device bricked (can't load OS, just constant reboots - loops), or you just can' downgrade to EMUI 2.3!
Good luck
Click to expand...
Click to collapse
Probably "brick" is not the exact word, but everything which i wrote in first post is true .. cant do a factory reset from settings and via 3 buttons and cant flash again emui 3 not only 2.3 and the phone just restarts or stuck on first huawei logo when i try to do that and cant charging when is turn off ..etc .. )) When i get quickboot from market what i have to do with it ? Thanks !
Tix0mir said:
When i get quickboot from market what i have to do with it ? Thanks !
Click to expand...
Click to collapse
To install quickboot you need to load OS which you apparently cannot at the moment. Did you try this: http://forum.xda-developers.com/ascend-p7/help/stock-recovery-stuck-bootloop-t2875935
ibeqa said:
To install quickboot you need to load OS which you apparently cannot at the moment. Did you try this: http://forum.xda-developers.com/ascend-p7/help/stock-recovery-stuck-bootloop-t2875935
Click to expand...
Click to collapse
I totally bricked the phone ... i wrote in fastboot "fastboot flash boot boot.img" and after that the ph0ne begin to restart in timeless circle .. and still do it ... please help emergency ))
Try the method on the first post: http://forum.xda-developers.com/ascend-p7/general/reverting-emui-3-0-to-2-3-t2934277
I fix it ... turned out i was installed wrong boot.img .. may be of huawei p6 and the stock recovery which installed doesnt work .. now instaled working and everything is ok Thanks 4 wish to help me !
I have a similar/the same issue as some people above described.
I reverted from CWM recovery to stock recovery (same stock recovery img as I used before succesfully). Now the phone can only boot to stock recovery (Reboot system now, Wipe data, Wipe cache, are the only options.
The phone is not detected by adb on that screen, so I can't try to reboot to bootloader using ADB. I also can't get into bootloader from volume button + power, because the phone boots immediately to recovery after I turn it off.
Fortunately I managed to solve it, so for reference:
Remove SD card
Place full (no incremental update) update.APP file on external sd card in /dload folder (B609: https://mega.co.nz/#!akcBCZBJ!4jLhlNsH54H-3DHeK3xPkzT3fWIHBR6QtbOllubdz5Q) using a different device (computer)
insert SD card
turn the phone off from the recovery loop by holding all three buttons (VOL+POW) at the same time. It's a bit tricky, but keep trying until the phone is off
Insert the USB cable in your phone and connect it with your computer (haven't tested if it simply needs power, or an ADB enabled computer)
Then immediately press all three buttons again
You should enter recovery again now, but the phone will immediately start flashing the update.APP ROM.
You will lose all user data though!
same problem here
Hello to all,
I had the same problem that my phone doesn't go on and time after time boot fails,
i read this solution and it works great i am updating my phone.
only i take the power + vol down and when the logo came switch vol down to vol up.
thx for youre help and sorry for my bad english
grts rob