Related
after lots of efforts i can able to full wipe my NOTE now plz tell me what to do i can format emmc / data / system / cache / sd-ext / sd card /
and after that i can do now full wipe and it is sucessufully full wiped now
plz tell me m i still bricked or i can install the rom now if yes then which rom last time i tried lpf at same stage but stuck at factoryfs... plz help me
edited: problem solved by this thread superbb......
http://forum.xda-developers.com/showthread.php?t=1667886
Recommended to stay on some kind of CM9 build ROM/kernel because it is "safe" from the brick bug. Probably should PC Odin back to a GB rom and start fresh though.
plz tell me in detail what to do now is it clear that phone is in condition to flash now bcoz fulll wipe is successfully done with cwm now
You got hardbricked, see general there is thread on how to fix it. I suggest send for repair at Samsung.
Sent from my GT-N7000 using Tapatalk 2
sun2sunny said:
after lots of efforts i can able to full wipe my NOTE now plz tell me what to do i can format emmc / data / system / cache / sd-ext / sd card /
and after that i can do now full wipe and it is sucessufully full wiped now
plz tell me m i still bricked or i can install the rom now if yes then which rom last time i tried lpf at same stage but stuck at factoryfs... plz help me
Click to expand...
Click to collapse
Download one of the older Roms from here and try to flash it using PC Odin.
If it gets stuck on NAND WRITE! or factoryfs, you have a brick.
Your best bet would be to head to the nearest Samsung service center if you are bricked.
nothing works buddiess... now telll me can a local mobile shop can repair it with jtag device bcoz in my county we hav to facility of samsung service center
sun2sunny said:
nothing works buddiess... now telll me can a local mobile shop can repair it with jtag device bcoz in my county we hav to facility of samsung service center
Click to expand...
Click to collapse
Not even one superbricked Note was revived by JTag AFAIK. We all had to have our motherboards replaced.
the shopkeeper is saying they can do it after opening device and repair it emmc chip with jtag soldering he said no device is totaly dead by software it can b repair by tools
now he is saying i m repairing PDA of galaxy note he said 90% chances are it will b fine after this
What exactly is the pda? That surely means the whole device?
Sent from my GT-N7000 using xda premium
sun2sunny said:
the shopkeeper is saying they can do it after opening device and repair it emmc chip with jtag soldering he said no device is totaly dead by software it can b repair by tools
Click to expand...
Click to collapse
No one has been able to JTAG, but if you want to pay him and take a chance, that is up to you. Tell him if it doesn't work, you don't pay.
i havnt pay him anything for jtag ...............
but i solved my problem with this thread
http://forum.xda-developers.com/showthread.php?t=1667886
my galaxy mini dont have imei.. I made a tutorial to unlock the phone and lost my imei. not to do, I'm desperate
help me please...
i tried flash stock rom, custom rom and nothing... i read that the problem has to do with a file called StL5, but i dont know... i hope you can help me... thanx
you are in a big trouble dude
do you have any backup of your imei partition
I lost my IMEI too, when I installed a custom from. But it's not a big problem if you have signal. Just, you can't install apps from PC through play store and you can't use the anti-theft function. And I think you can't recover your IMEI. I tried all the methods, but not success. And if you return your phone to the Samsung service, they will know that your phone is rooted, etc... Only if you hard brick your phone...There are some methods...
So which means he has to purposely hard brick his phone...
sent from a human's mind.
it means he possibly now have an Apod
I Dont have signal, i dont do nothing, the device reboot very much, Dont have Sound.... I think that is dead x.x
Sent from my GT-I9300 using xda premium
jamesmuking5 said:
So which means he has to purposely hard brick his phone...
sent from a human's mind.
Click to expand...
Click to collapse
Soft Brick, cause OS still running.
Maybe we can call it Phone Brick (no signal, IMEI, etc...)
When Samsung sc changes mobo of the phone, does we get knew IMEI??
maybe, maybe not
bad luck!
bad luck man , i never have see this , but try re-install the stock rom from samsung via odin wipe everything , if this happen with me i made that xp
: Silly:
delgamarco said:
my galaxy mini dont have imei.. I made a tutorial to unlock the phone and lost my imei. not to do, I'm desperate
help me please...
i tried flash stock rom, custom rom and nothing... i read that the problem has to do with a file called StL5, but i dont know... i hope you can help me... thanx
Click to expand...
Click to collapse
you still got the imei at the back of your phone after you put out the battery xD
anyway how to fix my baseband of XXXX? maybe its the reason why i cant upgrade 19070 2.3.6GB to 4.1.2JB any help pls...
ianmcgui said:
anyway how to fix my baseband of XXXX? maybe its the reason why i cant upgrade 19070 2.3.6GB to 4.1.2JB any help pls...
Click to expand...
Click to collapse
There is a whole new Galaxy S Advance I9070 Q&A, Help & Troubleshooting section. Try posting there and you maybe get an answer.
ianmcgui said:
anyway how to fix my baseband of XXXX? maybe its the reason why i cant upgrade 19070 2.3.6GB to 4.1.2JB any help pls...
Click to expand...
Click to collapse
Hard brick... go back to warranty.
yup i dud just send it to sam custumer service in my place... im worried coz my bin count is 11... lolz
ianmcgui said:
yup i dud just send it to sam custumer service in my place... im worried coz my bin count is 11... lolz
Click to expand...
Click to collapse
I had the same problem with my phone and couneter 3... LINK replaced motherboard in warranty
i saw your link and have the same prob... sam cervice center had my cp for 1 week and im wating hor it to be finished hopefully the XXXX will be gone with an accurate modem details or phone details... its still under warranty...
@vazz so the detail on you phone was ok for now? or still XXXX... and
what did the center told you? a hardware problem??
ianmcgui said:
i saw your link and have the same prob... sam cervice center had my cp for 1 week and im wating hor it to be finished hopefully the XXXX will be gone with an accurate modem details or phone details... its still under warranty...
@vazz so the detail on you phone was ok for now? or still XXXX... and
what did the center told you? a hardware problem??
Click to expand...
Click to collapse
After replacing the motherboard baseband good.
Service did not say anything...
flash the Official Firmware
ralts said:
flash the Official Firmware
Click to expand...
Click to collapse
LOL:laugh:
does not help anything, just replace the motherboard, or the JTAG
yes even official firmware does not help... im just waiting now for the cervce center for my unit... hopefully fixed that prob...
ianmcgui said:
yup i dud just send it to sam custumer service in my place... im worried coz my bin count is 11... lolz
Click to expand...
Click to collapse
vazzz said:
I had the same problem with my phone and couneter 3... LINK replaced motherboard in warranty
Click to expand...
Click to collapse
How you guys know what is the number of flash you have done? (binary counter)
Is there any software to check it?
[]'s
Одг: how to FIX BASEBAND XXXX?
navossoc said:
How you guys know what is the number of flash you have done? (binary counter)
Is there any software to check it?
[]'s
Click to expand...
Click to collapse
Go to download node, it will be shown there.
Sent from Galaxy S Advance
i received my phone now but still the same the tech said nothing, but i ask on phone/about/ why i have XXX in baseband? but he said they cant flash it because they only have pda and csc... tried inserting sim and it has network. but its normal for that unit, and showed me no problem on my network
ianmcgui said:
i received my phone now but still the same the tech said nothing, but i ask on phone/about/ why i have XXX in baseband? but he said they cant flash it because they only have pda and csc... tried inserting sim and it has network. but its normal for that unit, and showed me no problem on my network
Click to expand...
Click to collapse
Have you tried resetting your binary counter?
Sent from someone's mobile!
did everything then reflash Y" Z" and the latest Q" version again but no luck! im on GB again using the downgrade method, but still XXXX problem... i think thats the main reason why i have popup error "com.process.gapps has stopped" in the JB4.1.2 initial setup??? idk?
navossoc said:
How you guys know what is the number of flash you have done? (binary counter)
Is there any software to check it?
[]'s
Click to expand...
Click to collapse
turn off your phone completely...
press still volume down+home+power
wait for green android warning...read
press up to continue
there bc count (11) mine:/
ianmcgui said:
did everything then reflash Y" Z" and the latest Q" version again but no luck! im on GB again using the downgrade method, but still XXXX problem... i think thats the main reason why i have popup error "com.process.gapps has stopped" in the JB4.1.2 initial setup??? idk?
Click to expand...
Click to collapse
Because it will not work (JB) is not good for the baseband... Just restore the phone to Samsung service, or replace motherboard in other repair center... or wait to official JB, reset binary counter and send it back for repair to samsung, it can not be updated to jb... or cause a short circuit with a screwdriver :angel:, or ... no other to fix.
ianmcgui said:
turn off your phone completely...
press still volume down+home+power
wait for green android warning...read
press up to continue
there bc count (11) mine:/
Click to expand...
Click to collapse
We have way to reset it now. Look in Developer section.
yup, when i get my unit i asked why my baseband is XXXX? then the tech said its normal... bc is now 0... do they have the same odin methed like we do here on xda-d for upgrading and downgrading?? or different? cause i hear them 2 techs talking: did you "download it? no JB"? still GB? blahblah whispering to each other. i noticed that when i get my phone they didnt do anything in my cp, because all my free apps and games are still there, my settings are still the same. and msgs are all there. logs etc :/
so if i go back to sam service, what should i tell? sir i want my cellphn to be reset, maybe hell ask why so what should i tell if its running ok for GB?
Odp: how to FIX BASEBAND XXXX?
ianmcgui said:
yup, when i get my unit i asked why my baseband is XXXX? then the tech said its normal... bc is now 0... do they have the same odin methed like we do here on xda-d for upgrading and downgrading?? or different? cause i hear them 2 techs talking: did you "download it? no JB"? still GB? blahblah whispering to each other. i noticed that when i get my phone they didnt do anything in my cp, because all my free apps and games are still there, my settings are still the same. and msgs are all there. logs etc :/
so if i go back to sam service, what should i tell? sir i want my cellphn to be reset, maybe hell ask why so what should i tell if its running ok for GB?
Click to expand...
Click to collapse
Tell them it HAS TO HAVE proper baseband for your android version ...
tapatalked
Dear friends I am not able to reply in the developers forum so I am sorry if this post is not adequate.
I have install in my Galaxy S I9000 the new SlimBean Rom and everything seems to work great but I cant get Network acces or my contacts in my sim for that matter....
any Idea? please help... I got a nice tablet now with no phone usage
thanks
Did you go from GB to JB? Check if you have an IMEI number still, if not I guess you have damaged the efs folder...
FirmShark said:
Did you go from GB to JB? Check if you have an IMEI number still, if not I guess you have damaged the efs folder...
Click to expand...
Click to collapse
is there anything to be done?
If you do a search there are various ways to get it back.
you must be having a backup folder in your sdcard
S3 Mini not starting
hi
i have a problem
my phone was always starting into recovery when i tried to boot it normally into the system
so ive tried to reflash maclaws recovery with heimdall
and now phone isnt starting at all
not even splash where it says Galaxy s3 mini
screen is just black
when i try to load it i dont get a battery icon
can someone pls pls pls help me?
Lefl said:
S3 Mini not starting
hi
i have a problem
my phone was always starting into recovery when i tried to boot it normally into the system
so ive tried to reflash maclaws recovery with heimdall
and now phone isnt starting at all
not even splash where it says Galaxy s3 mini
screen is just black
when i try to load it i dont get a battery icon
can someone pls pls pls help me?
Click to expand...
Click to collapse
On which partition you flashed recovery.did you changed partition option to kernel2? Cause in s3 mini recovery should be flashed at kernel2
qasim799 said:
On which partition you flashed recovery.did you changed partition option to kernel2? Cause in s3 mini recovery should be flashed at kernel2
Click to expand...
Click to collapse
i did it with heimdall-cleanui, i think it was on GBT or GRT or GPT or something like that
i guess that was a huge mistake,
I found something intresting were some people can get into Download mode with a 301k Ohm resistance and a micro usb cable, but that was for the S3 and im not sure if that can work.
i would put the instructions here but i dont know if you understand german
Look here: http://www.android-hilfe.de/showthread.php?p=7249762
Hit me with the thanks button
Lefl said:
I found something intresting were some people can get into Download mode with a 301k Ohm resistance and a micro usb cable, but that was for the S3 and im not sure if that can work.
Click to expand...
Click to collapse
If I understand it correctly, this 300k resistor trick is the same as a USB jig, and should work on the S3 mini. It may be worth a try building one is you can find instructions. Nothing to lose!
Maris
Lefl said:
i did it with heimdall-cleanui, i think it was on GBT or GRT or GPT or something like that
i guess that was a huge mistake,
I found something intresting were some people can get into Download mode with a 301k Ohm resistance and a micro usb cable, but that was for the S3 and im not sure if that can work.
i would put the instructions here but i dont know if you understand german
Click to expand...
Click to collapse
Oh that is same which I did you flashed it on mbr, gpt now your phone is completely dead .if you unbrick it you will get other problems like no imei etc the best solution I suggest is to take it to samsung and claim it in warranty.DON'NT DO ANY THING BY YOUR SELF BECAUSE WARRANTY WILL AVOID AND SAMSUNG WOULD NOT ACCEPT IT.
qasim799 said:
Oh that is same which I did you flashed it on mbr, gpt now your phone is completely dead .if you unbrick it you will get other problems like no imei etc the best solution I suggest is to take it to samsung and claim it in warranty.DON'NT DO ANY THING BY YOUR SELF BECAUSE WARRANTY WILL AVOID AND SAMSUNG WOULD NOT ACCEPT IT.
Click to expand...
Click to collapse
If i can get it to work with the resistance (ill try tomorrow) and my imei is really lost and i can recover it without wiping the internal storage then im fine, ive got a backup of my efs there
Lefl said:
If i can get it to work with the resistance (ill try tomorrow) and my imei is really lost and i can recover it without wiping the internal storage then im fine, ive got a backup of my efs there
Click to expand...
Click to collapse
Restoring you efs would not restore your imei because novathor phones don't save their imei in efs I restored it many times but my imei doesn't came back so give to samsung they would give a new phone for free .don't tell them anything you did just say it was running fine and suddenly bricked.
ok ive tried the resistance, didnt worked
qasim799 said:
Restoring you efs would not restore your imei because novathor phones don't save their imei in efs I restored it many times but my imei doesn't came back so give to samsung they would give a new phone for free .don't tell them anything you did just say it was running fine and suddenly bricked.
Click to expand...
Click to collapse
dude i dont think theyll give me a new one my warranty is expired for 2 month now AND its rooted.
If anyone can tell me a good (and not too expensive) service in Europe (good) or better in germany it would be very helpfull.
Lefl said:
ok ive tried the resistance, didnt worked
dude i dont think theyll give me a new one my warranty is expired for 2 month now AND its rooted.
If anyone can tell me a good (and not too expensive) service in Europe (good) or better in germany it would be very helpfull.
Click to expand...
Click to collapse
ok i found w-support.com but they say it a standard-repair would cost 112€ but thats not a real standard repair is it?
Lefl said:
ok ive tried the resistance, didnt worked
dude i dont think theyll give me a new one my warranty is expired for 2 month now AND its rooted.
If anyone can tell me a good (and not too expensive) service in Europe (good) or better in germany it would be very helpfull.
Click to expand...
Click to collapse
go to any good phone repair center and he would unbrick it using jtag riff box and then you would get other problems likr internal storage 0 b and some yellow text on screen and factory mode then come back here ask me i have best solutions
qasim799 said:
go to any good phone repair center and he would unbrick it using jtag riff box and then you would get other problems likr internal storage 0 b and some yellow text on screen and factory mode then come back here ask me i have best solutions
Click to expand...
Click to collapse
aha found a guy who jtag it and flashes the Stock rom, if i have any problems then ill ask.
ok found out that
Code:
dmesg | tail
detects it,
but im still going to send this to someone who can JTAG it
I have s3 mini that is completely dead. Tried to fix it with usb jig, but nothing happened. Any suggestions?