Related
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
I have the same issue. I was tryint to load Cognition and it just gets stuck on the ATT screen but I haven't tried a jig yet. I was wondering if I can replace the files on the phone with good files that aren't corrupted and see if it boots up because droid explorere can still pick up the phone and so does Odin but when I do a master reset nothing happens.
@rajasekhar - Have you tried: Removing all parts (battery, sim, sd) let it sit for a few min (my preference is around 10 min to insure no residual power is left in the system) then hold the jig in place and putting the battery back in? Keeping the jig in place, so that as soon as the device gets power it is immediately seeing the jig, before it can try any other processes.
A bit difficult to do with hand made jigs I know. If you still getting nothing then your in for the worst and the phone need a JTAG or service center visit.
Tho it sounds a little odd that it could boot up to seeing the AT&T logo, but does not respond to the jig. Might even be a hardware problem.
@i3oots - Since you say your still getting PC response your safe to try and reflash it or just pick something different altogether. Tho you might wanna let ODIN settle and just sit there doing nothing for a few min, w/o then w/ the phone plugged in. Or learn about Heimdall and go that route.
Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
You have probably Hard Bricked your phone. A JIG will not work to recover the phone. If the phone has any life at all, then the JIG will work. Else, u hard bricked it...you should never remove the usb cable when flashing bootloaders or odin or anything!
the only solution is to get a JTAG which can recover hard bricks OR you can go to a warranty store (don't know about india) and make up a sob story and have them replace it..
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
Does your computer recognize the phone? If odin is open, does the box turn yellow when you connect your phone? Make sure you have the right drivers. I think cm7 and captivate drivers are different. Keep trying with the jig. Just because you can't see anything on the screen doesn't mean the phone is dead.
i3oots said:
Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.
Click to expand...
Click to collapse
If your phone is booting up far enough to send out USB info for ODIN and other PC programs to see it, then your still in a workable condition. This also means you can still get into download mode, but since things arn't working properly it will be harder. Depending on which bootloaders your phone has will direct which methods you'll have to try out to get into download mode.
AFTER you've had a chance to look around the forum and self-educate on the different ways of getting into download mode. If your still having problems give us a lil more info of what you were running before the flash and to which version of Cog you were trying to flash.
Did anything worked for you, if not only a jtag can help you looks like u hard bricked the phone.
Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today
bricked maybe not
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU...... ................................................. I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cant find the original post
rajasekhar19489 said:
Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today
Click to expand...
Click to collapse
rajasekhar19489 said:
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Click to expand...
Click to collapse
If you just wanna know a bit about the process ask this guy. He is pretty much the only person in the US (I know not all to useful to a person in India) that does JTAG for the cappy.
I can tell you this much, it requires a special device called a Riff box and it sends boot info directly to the chip on the main/mother board that is used for the booting process.
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.
malebornin69 said:
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU......
Click to expand...
Click to collapse
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..
DaNaRkI said:
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.
Click to expand...
Click to collapse
Thanx DaNaRkI .. hmm well i would now again start digging the threads for seeing wat u have suggested ..
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
hello brother,,
u can find the Jig here in india... i also purchased... and it worked for me..
Download-Mode-USB-Jig
press thanx if it helps..
rajasekhar19489 said:
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..
Click to expand...
Click to collapse
Hope it helps I wish I could find the original post again to thank the guy that told me how to do it. I had sent that phone back to att and the promptly sent it back and told me the water dammage sticker in the bat compartment was missing and they wanted to charge me 409 bucks for the phone ....long story short it was there when I sent it and I told them to go pound sand up their ass because I wasnt paying them that much and ended up paying 125 bucks for a paper weight.So that is when I decided to have it jtaged but figured I would give it one more shot before mailing it off. That was when I found the post from that person and low and behold it worked........................... I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cat find the original post
malebornin69 said:
Hope it helps
Click to expand...
Click to collapse
Buddy tried it ... Thanx for that..But dint help . Now going for another options i mean in search for other options
But ppl help me with JTAG thing and its users(or developers) availability in india
Forgot to mention
I Missed to explain my flashing procedure i have done this time . Like I never tried flash a boot file along and so was reading some threads about boot loader variations between FROYO and GINGERBREAD so i tried flashing ablong with boot loader and then I got the stock gingerbread file i put the boot loader SBL in heimdall Firstboot loader path .And Boom the first reboot got stuck and i removed the battery and then again when i tried to restart the phone is dead
Thinking this might have where the whole thing went wrong and made the cell dead .
The story so far...
Bought a new Optimus Black and gave it to my girlfriend for her birthday a couple of days ago. After playing with it for about an hour she put it down, I picked it up and decided to have a tinker. I installed Cyanogen mod 3.5.1 after rooting it with Gingerbreak. So far so good but I didn't really like the look of the ROM and the absence of a Market seemed like hassle so I used ClockworkMod to restore the backed up stock ROM.
It's still working fine but now I see there is an official update from inside the phone. I presume it's the upgrade to Android 2.3 so run it and reboot the phone. That's when it all goes wrong. I'm now stuck in the CWM recovery screen. I try all the options, following any online guides I can find that were supposed to have worked for people. I try restoring the backup, restoring cyanogen, clearing the cache, dalvik, everything but nothing happens and I keep booting back into the CWM recovery screen.
Next day I try the LGUnitedMobileDriver and the phone recovery option but despite trying several times I can get no further. A friend tried to use Odin to restore it but got no success. Finally, we tried restoring with a KDZ file with
KDZ_FW_UPD_EN, Windows Enabler and LG B2CTool and now the phone got stuck in yet another loop - a black screen with 'updating firmware'. The LEDs flash for a minute and it reboots and does the same again.
What's more, the phone will now no longer charge or turn on without being connected to the mains.
What are my options here?
Follow the tutorial given below.
http://forum.xda-developers.com/showthread.php?t=1275315
Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.
pickarooney said:
Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.
Click to expand...
Click to collapse
have you tried the CS_EMERGENCY option in R&D TOOLS? Wait I'll find the link..
Here >>> http://forum.xda-developers.com/showpost.php?p=18841596&postcount=8
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45
The CS_EMERGENCY is the only thing worked, he used a german V10A ROM. If you managed to unbrick it, you can flash it again with your desired KDZ, or use CS_EMERGENCY and flash directly your desired KDZ. TRIAL AND ERROR.
Emergency c-section... nope, I will try that now!
Said that it will get stuck at 4% but it is still flashing. Just wait for the phone to reboot by itself.
It just crashes with a fatal error as soon as it gets to the second tab (downloading) on both PCs I tried it on. I tried several KDZ files with the same result.
Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?
pickarooney said:
Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?
Click to expand...
Click to collapse
Does it have warranty? Why not RMA it, I think it has a hardware problem now since you mentioned it doesn't charge anymore. Also, have you tried a different USB cable?
The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.
pickarooney said:
The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.
Click to expand...
Click to collapse
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.
gabwerkz said:
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.
Click to expand...
Click to collapse
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..
darkzorn said:
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..
Click to expand...
Click to collapse
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
Fingers crossed for you !!!
pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
IT will mostly work..Good luck though and please do reply here and let us know if it worked..
Ok so if the answer to this question is already on this forum I searched for a hour and if you could drop me a link that would be great. Last night I flash v10k onto my LG thrill with no hiccups. The only problem is I want to go back to V20p because it changed to a O3D and all I can get is 2g edge service. So this morning I attempted to flash V20p and everything was kosher until it said there was a connection error. "Disconnect phone remove battery..." So i figured I needed to get the phone back into download mode in order to continue. The phone isnt bricked, however, I cant seem to get it back into Download mode to try again. Ive tried everything (that I can think of). Restarted my computer wipe all my phones data... My end goal is to have either v10e or the v20p. So I'm open to any routes to this end. I've read about doing a nandroid backup but all the links are dead. I've already decided I'm going to get the Galaxy Nexus and sell this phone if I can ever get it back to stock or semi stock. This is the second time I've had this connection error the first time it was during the update to GB and that time it bricked it. At the time I thought it was a faulty data cable, however, this time I was using a gold plated gigawire and it still did it... This coupled with the ghost call issue almost costing me my job(the reason for trying to go back to froyo) My experience has been buggy to say the least. Any help at all will be greatly appreciated.
PROlific666 said:
Ok so if the answer to this question is already on this forum I searched for a hour and if you could drop me a link that would be great. Last night I flash v10k onto my LG thrill with no hiccups. The only problem is I want to go back to V20p because it changed to a O3D and all I can get is 2g edge service. So this morning I attempted to flash V20p and everything was kosher until it said there was a connection error. "Disconnect phone remove battery..." So i figured I needed to get the phone back into download mode in order to continue. The phone isnt bricked, however, I cant seem to get it back into Download mode to try again. Ive tried everything (that I can think of). Restarted my computer wipe all my phones data... My end goal is to have either v10e or the v20p. So I'm open to any routes to this end. I've read about doing a nandroid backup but all the links are dead. I've already decided I'm going to get the Galaxy Nexus and sell this phone if I can ever get it back to stock or semi stock. This is the second time I've had this connection error the first time it was during the update to GB and that time it bricked it. At the time I thought it was a faulty data cable, however, this time I was using a gold plated gigawire and it still did it... This coupled with the ghost call issue almost costing me my job(the reason for trying to go back to froyo) My experience has been buggy to say the least. Any help at all will be greatly appreciated.
Click to expand...
Click to collapse
So you want V20P or V10E?
Sent from my Samsung Galaxy S II w/ DUAL BOOT: AOKP / MIUI
I really want V10e if its possible but If not then V20p will work.
I am having similar problems when I try as well. I have tried 5 or six times but tells me something about the b2c not loaded or a connection to the internet. Every time I hit "normal web upgrade test" it throws up a pop up and wont let me proceed any further. It has worked for me twice before, I got the no connection pop up and ignored it, but its not working this time. I set everything up the same from instructions on Acidhazzard rom web site. Please help...
I had to change the port back to 80 and put the orig host file back in the ect file just to download the bc2app then change it all back it worked the first time when i flashed v10k... idk i would delete the lg drivers and everything then start from scratch if i could boot into download mode.
Sent from my LG-P920 using Tapatalk 2
I have been starting...
From scratch. I download the LG flash package and go from there. It does it every time I try. The times I got it to work, I would just hit cancel or OK on the pop up and then hit the OK button I was wanting to hit real fast before the pop up could come back up. I thought it may be a Windows 7 issue (cause I have seen people talk about it) and tried win xp yesterday. Same things happened.
Im running Xp and Im having the same exact thing happen. I got it into download mode finally idk what was going on but now I just keep getting the communications error Ive tried the whole process (each one is like 5 errors) like 3 times now. If it keeps popping up before the update even starts then your probably need to change your small server port from 80 to 9002.
fixed
Somehow after getting the com error 100 times with the flash tool I noticed it had changed my model number back to P925 (I don't know how it did this) I then decided to chance it (after I changed the host file back and changed the port back to 80 and closed the small http server) I went through the LG support tool and clicked start update. After about 20 min of uncertainty during the update and another 5 minutes of self-loathing after getting a bootloop on the at&t screen... I did a hard reset and cleared all data and wah-la... I got it back to V20p. But the flash tool wouldn't flash the v20p for me.. So if I didnt somehow get rid of the P920 model number and back to the P925 model number I don't think it would have worked the way it did.
ok so i was running a devil kernel on jellybean 4.2 and for some strange reason the rom started acting funny and gave me a message saying i had to type in a password ti decrpyt storage even though i have no passwords on my samsung I897. So i decided to flash back to stock and start all over again from scratch using odin one click but in the middle of downloading my phone was disconnected and it gave me the bricked screen shortly after. Now i am unable to do anything on this phone ive tried pushing the volume buttons and taking the battery and sim card out while running odin 3 again trying to force it back into download but so far no progress has been made. If any one can help me it is much apprecitated.
theklxn said:
ok so i was running a devil kernel on jellybean 4.2 and for some strange reason the rom started acting funny and gave me a message saying i had to type in a password ti decrpyt storage even though i have no passwords on my samsung I897. So i decided to flash back to stock and start all over again from scratch using odin one click but in the middle of downloading my phone was disconnected and it gave me the bricked screen shortly after. Now i am unable to do anything on this phone ive tried pushing the volume buttons and taking the battery and sim card out while running odin 3 again trying to force it back into download but so far no progress has been made. If any one can help me it is much apprecitated.
Click to expand...
Click to collapse
Which Odin did you use? When already on JB, you should be using Odin KK4 without bootloaders to avoid hard bricks.
If your Odin was flashing bootloaders when it got interrupted, chances are that it's hard bricked and only JTAG service will bring it back. You can contact Josh at mobiletechvideos.com for it (of course there's a fee for the service).
You can try a jig before going through JTAG service (build or buy one), maybe you'll get lucky and be able to force download mode but know that if it got interrupted while flashing the BLs, only JTAG can bring it back.
i was afriad you might say that didnt think i would have to go that far to bring it back but thank you for the swifty reponse ill get back to you when my problem has updated
Hi I'm trying to set up my lock screen whit finger print but no matter homw many time i try i keep getting an error has occurred whit the fingerprint sensor if this messages appears repeatedly restart you phone i restarted the phone multiple times and same problem tried diffrent roms same problem any one else has this problem ?
COCODRILO45 said:
Hi I'm trying to set up my lock screen whit finger print but no matter homw many time i try i keep getting an error has occurred whit the fingerprint sensor if this messages appears repeatedly restart you phone i restarted the phone multiple times and same problem tried diffrent roms same problem any one else has this problem ?
Click to expand...
Click to collapse
Interesting, this happened to me as well yesterday along with some incredible lag with keyboard and scrolling pages. Like the phone is doing something, ive Odin flashed stock fw 4 times with full wipes. seems something just suddenly defected my phone..
EDIT: BTW this happened after trying to flash a custom rom to my phone, phone was running great when i got it.
i got it working i had to flash back to stock via odin that's the only way it works for me as soon as i flash a custom rom it will stop working if you figure out how to get it working whit a custom rom let me now pls
COCODRILO45 said:
i got it working i had to flash back to stock via odin that's the only way it works for me as soon as i flash a custom rom it will stop working if you figure out how to get it working whit a custom rom let me now pls
Click to expand...
Click to collapse
Really? flashing back to stock worked for you? hmm wonder if my stock fw from sammy is damaged, but usually if it was it wouldn't flash via Odin it fail.
yea that worked for me im about to flash it back to stock again i just cant get it to work on any rom I keep getting that error i guess ill go stock rooted for now
COCODRILO45 said:
yea that worked for me im about to flash it back to stock again i just cant get it to work on any rom I keep getting that error i guess ill go stock rooted for now
Click to expand...
Click to collapse
Now when you got that fingerprint error, did you experience and hard core lag in scrolling or in the keyboard? like every 3 seconds it pause like it's doing something?
not really im using nova launcher and for keyboard swiftkey running preety smooth im on firekat rom
Having the same issue with Hyperdrive. Restore my stock rooted backup and it works fine. Really looking forward to an answer on this one.
Must setup first time before rooting and flashing roms. This has been discussed in other threads.
Did that, still didn't work.
Diablohtr said:
Having the same issue with Hyperdrive. Restore my stock rooted backup and it works fine. Really looking forward to an answer on this one.
Click to expand...
Click to collapse
Is it just Hyperdrive or have you tried one of the other ROMs? I am Dynamic Kat and do not have the issue although other people do, ones that did not setup before flashing that ROM.
keitht said:
Is it just Hyperdrive or have you tried one of the other ROMs? I am Dynamic Kat and do not have the issue although other people do, ones that did not setup before flashing that ROM.
Click to expand...
Click to collapse
Haven't tried any others yet. Going to wait it out a few days and hopefully we will have a solution.
COCODRILO45 said:
Hi I'm trying to set up my lock screen whit finger print but no matter homw many time i try i keep getting an error has occurred whit the fingerprint sensor if this messages appears repeatedly restart you phone i restarted the phone multiple times and same problem tried diffrent roms same problem any one else has this problem ?
Click to expand...
Click to collapse
I have your same problem but even worse, not going to solve it stock still gives the same result I am losing faith
CapitanFantasma said:
I have your same problem but even worse, not going to solve it stock still gives the same result I am losing faith
Click to expand...
Click to collapse
I tried using odin, I was on NIH firmware with no luck... and then flashed odin with NJ7 with no luck from that, I must of flashed the firmwares over 8 times,
I went and replaced my white note 4 at a corporate near me, with a black note 4.. no one had them in stock, dialing 611 was no help, they said since u bought it at a store, I had to go there, I found a corp store that had 2 left, I rushed over cause they don't hold it for anyone. employee wanted to charge a $50 restocking fee, I told them the phone is defective, and the manager override the sale..
I am having the same problem of the fingerprint scanner not working after flashing a custom ROM. I followed everything to a T & it didn't install (& yes, it is for my N4). I went back to stock using Odin, several times & have not resolved it yet. I do not want to take it back but I do like having the fingerprint scanner. Luckily, I have another N4 cause I bought 2 when they came out cause I planned on trying to turn a profit on 1 of them, but I'll be damned if everybody didn't make it easy as hell for anyone to get one. I guess I can use the 1 that doesn't work right for flashing & playing around on & then when I find "THE" ROM that I'm happiest with, I can flash it on the good 1. IDK. This is BS though. Somebody has to know how to get it back working right. I know that people that helped create this phablet, are members of this site, so I hope that they or someone else that has fixed this problem replies to our question. I flashed this ROM... http://forum.xda-developers.com/note-4-sprint/development/rom-alpha-semper-fi-t2926682 & the fingerprint scanner still worked, but after flashing this ROM... http://forum.xda-developers.com/note-4/snapdragon-dev/25-october-2014-n4-echoe-rom-1-t2917941 it no longer worked & hasn't since. I am going back to stock (again) & hoping this will work. I'll update if it works.
See this post/thread, it worked for me....
http://forum.xda-developers.com/showpost.php?p=56896357&postcount=85
http://forum.xda-developers.com/not...ure-fingerprint-scanner-t2919478/post56896357
Looks like these are for T-Mobile. What about Sprint? N910P
Sent from my SM-N910P
JoeBear1975 said:
I am having the same problem of the fingerprint scanner not working after flashing a custom ROM. I followed everything to a T & it didn't install (& yes, it is for my N4). I went back to stock using Odin, several times & have not resolved it yet. I do not want to take it back but I do like having the fingerprint scanner. Luckily, I have another N4 cause I bought 2 when they came out cause I planned on trying to turn a profit on 1 of them, but I'll be damned if everybody didn't make it easy as hell for anyone to get one. I guess I can use the 1 that doesn't work right for flashing & playing around on & then when I find "THE" ROM that I'm happiest with, I can flash it on the good 1. IDK. This is BS though. Somebody has to know how to get it back working right. I know that people that helped create this phablet, are members of this site, so I hope that they or someone else that has fixed this problem replies to our question. I flashed this ROM... http://forum.xda-developers.com/note-4-sprint/development/rom-alpha-semper-fi-t2926682 & the fingerprint scanner still worked, but after flashing this ROM... http://forum.xda-developers.com/note-4/snapdragon-dev/25-october-2014-n4-echoe-rom-1-t2917941 it no longer worked & hasn't since. I am going back to stock (again) & hoping this will work. I'll update if it works.
Click to expand...
Click to collapse
sorry dude, I don't know what it was, but when it happened to me, I was on NIH, and had the fingerprint saved, i tried everything, and when i deleted the saved fingerprint, it didn't want to work, nothing worked, i tried for 2 days searching and trying out my own stock odex roms and the firmware, it did not work.. sucks i know...
i had to return it to tmobile corporate store, if u have insurance on it, just play stupid and return it, if u have someone you know on tmobile, just let them put it on their account with put the $8 insurance, have them wait 1 week, call 611 and just say the fingerprint sensor went bad, and just pay $5 and have a replacement sent out,
lucky for me it happened less than a week for me, and went to a tmobile corporate store and they gave me a new phone in a box, but a replacement is still good it is not a refurbished phone...
I got it figured out & will post a file once it finally uploads, but in the mean time. If you have registered at SamMobile.com go there, click on the firmware tab, scroll halfway down to where it says FIRMWARE on the left side of the column & search device here on the right side. Type in your model number & it will show up right below the search area. Click & download the newest file. Here is the link for the Firmware site with search field filled in with N910 http://www.sammobile.com/firmwares/ While that is downloading, do a factory reset on your phone, DO NOT backup your info, you will need to restart it, but it's worth it. Once the reset is done, your phone will reboot, don't worry about going into setup, just turn the phone off & go into download mode (while phone is completely off, hold, in this order, VOLUME DOWN, HOME & POWER, press VOLUME UP when prompted. Connect your phone to computer. After the file downloads, open Odin (I'm assuming you already have Odin installed on your computer, if not you can find the link here http://odindownload.com/ I didn't have luck with Odin 3.09, but the 3.07 version works great. Your Firmware file should be done downloading by now, if it is, put it in your Note 4 folder (or whatever folder you have designated for your N910-) & extract it to there. Open Odin & click on the PDA button (& DO NOT CLICK ANYTHING ELSE), click on the file you just extracted & then click Start. Once that loads, your phone will reboot & be just like it was from the factory. Hope this helps everybody. Once the file uploads to my Dropbox, I'll post it on here to save you some time.
Here's the link for N910P https://www.dropbox.com/s/f5f63rb4d8ybsm3/N910PVPU1ANK2_N910PSPT1ANK2_XAS.zip?dl=0
If this was helpful, please hit thanks.
mdiaz33685 said:
sorry dude, I don't know what it was, but when it happened to me, I was on NIH, and had the fingerprint saved, i tried everything, and when i deleted the saved fingerprint, it didn't want to work, nothing worked, i tried for 2 days searching and trying out my own stock odex roms and the firmware, it did not work.. sucks i know...
i had to return it to tmobile corporate store, if u have insurance on it, just play stupid and return it, if u have someone you know on tmobile, just let them put it on their account with put the $8 insurance, have them wait 1 week, call 611 and just say the fingerprint sensor went bad, and just pay $5 and have a replacement sent out,
lucky for me it happened less than a week for me, and went to a tmobile corporate store and they gave me a new phone in a box, but a replacement is still good it is not a refurbished phone...
Click to expand...
Click to collapse
I stuck with it & fianlly got it figured out. What a pain in the a$$ that was, lol