alright, ive read dozens of posts and troubleshooting forums and i cant get this working to save my life.
im trying to get CWrecovery going on my Original Droid. Im on a mac, i can get the sbf and recovery to flash and ive tried 2 different sbf's and recovery images.
I had to do a -f to get the img to flash(hence the data[4] thing) but i read that sometimes happens. anyway it seems to flash fine, but then i hold "x" and power to boot into recovery after flashing, i just get the android triangle thingie.
heres a screenshot of my flash process, as you can see it goes through like a champ. ive tried this 3 times and im sure the problem is between the keyboard and the chair, however i cant seem to get it going. any help would be appreciated.
http://imageshack.us/photo/my-images/707/screenshot20111202at734.png/
Solved. I just used RSDlite in a windows partition and everything went smooth. Thanks for the help.
what did you do in windows partition? hadyou rooted in stock via oneclick 1.95?
I had the same issues. I am also on a mac.
I went to rom manager and flashed different versions of CWM until I got one that worked.
For some reason droids don't like Ver. 2.5.0.1. However, Ver 3.1.0.2 has worked for me and I've been using it to flash different ROMS on my phone.
Give it a try and tell me how it works. I'm still a little new and there does not appear to be enough support here for Mac users with droids to help me out if I get in a pickle. I'm always looking for an easier way.
Related
Ok so I have an unlocked Nexus One that I rooted when I first got the phone 6 months ago. I've been running CM6 no problems at all, everything has been great.
Heres where my problem starts I decided to flash the stock frf91 image onto the phone and did not check superuser permissions or whatever option they gave me before i did it. I was doing this because I thought I was selling my phone. Now I'm not and want to go back to CM6.
The problem is I cant get into recovery at all I get the error with the ! in a triangle with android standing next to it. I've searched everywhere and tried everything. Fastboot and ADB gives me errors like waiting for device (even though my drivers are up to date and it recognizes the phone?) or status failed too many links.
I tried doing a backup from my nandroid information through my nandroid backups on my computer (aka pulling system.img etc) I tried going through the terminal but Im getting denied superuser permissions.
Im just not sure where to go from here ive looked through so many articles and threads and posts and im very confused.
After I flashed the stock image I thought i would still be able to boot into recovery but i guess i dont have recovery? I try to flash the recovery but with no avail.
Anyone have any advice or even just somewhere to start I would really appreciate it. Thanks
When u flashed the stock rom it wasnt a rooted version so u have the stock recovery search for how to root the stock Rom once rooted u can put a custom recovery on there hope this helps
The procedures for the different handsets kind of blur together in my memory, so just want to check.
When you booted into recovery and got the "!" screen with the android did you try holding either the volume up, or volume down key <along with the power button> to bring up the menu?
The ! With the Android is the stock recovery image if I remember correctly if u press the power button the menu should pop up
First of all, I have checked around quite a bit on this forum as well as others to try and avoid having to ask a question that's already been answered. Here's my problem/ what happened. I was rooted (one-click with locked bootloader) and had tried out several roms for a couple of months now. A few days ago I reverted back to an old stock 2.2 backup. My phone received two ota updates and I'm pretty sure I lost root. I had just went on using the phone for about two days when I ran into a problem today. After shutting the phone off I have now become "stuck" at the initial "X" screen (not animated). I pulled the battery and tried again several times. I then tried to reboot into recovery from the bootloader/ 3 skateboards screen with no luck. Any time I hit recovery it simply takes me back to my stuck "X" screen. I have an entire backup of my SD card from earlier as well as at least 4 nandroid backups (one of which was the stock 2.2 before the latest ota). I am thinking I need to somehow put clockwork recovery back on my phone so I can restore to one of my backups. I do not know how to do this. Sorry for the lengthy post but I want to provide as much information as possible. Any help at all would be greatly appreciated.
Just like you restore to stock 2.2. You should have used recovery.img. use adb fastboot to put the stock or anom recovery. I am not am expert but I have had the same problem few times. Always use adb commands
Sent from my Nexus One using Tapatalk
Does my n1 have to be in usb debugging mode because it's acting like it's not connected or something. I get the message "error: device not found." I'm on the fastboot screen on my n1 and using terminal on a mac. I usually didn't leave debugging mode on
No it doesn't but you have to have the drivers installed as well as the SDK with dependencies.
Whew! Thank God! I ended up getting a FRG33 stock rom onto the sd card and the bootloader detected it. I'm not sure what happened but when I tried recovery after that it took me to the android with an "!" point (meaning no recovery?) and then back to the X. This time however it loaded on through and went right back to the way it was before it was stuck. Again, not sure what happened but thanks for the replies and help.
fastbook oem unlock
install Amon RA recovery
flash new rom.
Caseyp789 said:
Whew! Thank God! I ended up getting a FRG33 stock rom onto the sd card and the bootloader detected it. I'm not sure what happened but when I tried recovery after that it took me to the android with an "!" point (meaning no recovery?) and then back to the X. This time however it loaded on through and went right back to the way it was before it was stuck. Again, not sure what happened but thanks for the replies and help.
Click to expand...
Click to collapse
The exclamation mark is just the stock Android recovery - it was re-installed when you loaded the stock FRG33 ROM.
Performing OTA updates requires you to have the stock recovery installed. Simply reverting to a stock 2.2 nandroid isn't sufficient, so trying to install those OTAs (which should have failed without stock recovery) may have broken something there.
GldRush98 said:
fastbook oem unlock
install Amon RA recovery
flash new rom.
Click to expand...
Click to collapse
This is by far the easiest (and safest) way. Google/HTC provided us an easy and safe method for gaining full access to our phones.... Why so many people refuse to use it is beyond me. If you root it the proper way (with fastboot oem unlock), it will make recovery from any further issues a lot more simple.
From what I can tell, I am having the same symptoms as the topic creator. I believe the problems started during a failed flash of cyanogenmod 6, but I am not sure by what means the flashing took place.
I can't boot the phone normally, it hangs on the X splash screen and the same occurs when trying to enter recovery mode.
I have tried the passimg approach to fix this, it either doesn't recognize my zip or starts loading it and freezes on a loading bar.
Fastboot flashing recovery completes, but doesn't fix the issue.
I can fastboot flash every image partition except system or radio, both hang.
As danger rat and dude random both know, I have posted this problem on the nexus one forums but I thought I'd post here to have some more minds look at it.
Hi,
Full version as a note. Droid 1
Flashed clockworkmod recovery (2.5.0.1), went fine. Made a backup of stock rooted ROM, worked fine. Next flashed bugless beast .6, while clearing data & cache, no problem.
Now i want to flash to cm - trying out different ROMs - trying to reboot into recovery or flash another ROM both fail to get me to a bootloader. Instead i see the motorola boot logo for 30-45 seconds, followed by what looks like a regular boot (motorola M, then Droid eye, & booted.). I have also tried fixing permissions.
If anyone has any idea why this is happening or can direct me to a forum link it would be greatly appreciated. Sorry if this is in the wrong section, and yea I've tried looking through the forums for a while.
Thanks
just a little baby sized pump...
This happened to me too after working perfectly for several months. All of the sudden I just couldn't get to clockwork. I am running CM7 Nightlies. After not being able to fix the issue for several days I decided that a full wipe via the .sbf method was in order. I've got everything up and running again but it was an annoying process. Can anyone out there help us to understand why this happened so we don't have to deal with this again?
Do you have a link for the method you described about? That would be really helpful!
An ever so slightly larger bump
I really am not trying to be lazy, but all the .sbf methods I've read so far seem require you getting to a boot loader. If I could get to a boot loader this wouldn't be a problem, as I made a back up of my stock ROM. I have a functioning bugless beast ROM, just no recovery / boot loader, and no way to flash back to my recovery.
And possibly solved..
One: Please pardon my ignorance, doing these things on my Eris was far easier, or at least what I got used to.
Two: Please also ignore the word boot loader in my previous posts, as it was the recovery console that I could not get to load. Sorry Again.
Three: Its magically working. My methods were unscientific to say the least, but the Droid is now in "ClockworkMod's Recovery v2.5.0.1".
Things I finally did:
NOTE - I DO NOT BELIEVE ANY OF THIS TO BE THE PROPER ORDER OF THINGS. PLEASE VERIFY WITH SOMEONE FAR MORE INTELLIGENT THAN ME. THE FOLLOWING REFLECTS THE PROCESS I DID, AND SHOULD PROBABLY NOT BE FOLLOWED UNLESS A MOD ACTUALLY SAYS THIS WAS CORRECT
1. Pulled Battery, hold power button down for a few seconds, and then put back in
2. Hold Up on D-pad while holding the Power Button
3. You see the following
Code:
bootloader 2c.7c
battery ok
ok to program
connect usb
data cable
4. Connect USB data cable to PC running RSD Lite. You will also want a .sbf recovery file from a trusted source.
5. Select the .sbf in RSD Lite. Tell it to start. I used the clockwork recovery only .sbf
*** Where things got officially weird for me ***
6. The .sbf file I told it to load seemed to work, as the progress bar moved. The phone almost instantly rebooted, back to the ROM I was running minutes earlier. Clockwork had not been working previously trying to reboot into recovery, but almost instantly upon trying this time, I was in recovery mode.
NOTE - The USB cable was still plugged in as well. I don't know which combination of things actually got this to work, but it did.
Hope this helps someone else out.
I've been having trouble with my Vibrant and with T-Mobile in limbo I picked up a N1 off ebay to hold me over. This thing is driving me insane!
The phone came with CM7 installed on it, but the person that shipped it to me didn't erase any of there stuff so I figured I would flash a fresh image on the phone to take care of things. I've flashed my Vibrant a dozen or so times and never had an issue. Flashed the N1 and it comes up with an X made of 4 different colored lines and a little lock at the bottom. I know some roms take a while to load so I let it sit for an hour. Nothing.
Since I've been trying everything I can find out how to recover the phone including all of the guides on the wiki. I'm at my wits end at this point. I can't get into clockwork at all on the phone. It gets stuck in the bootloader and if I select recovery it just takes me back.
I've got droid explorer running, and the phone shows up, but it doesn't show anything on the phone, no folders or files and won't let me load anything on to it. (it says it is, but then stays blank) I have no clue what to do at this point short of taking a sledge hammer to it. (obviously I'm posting this as I consider that to be plan B)
I don't need anything special, I just want a working phone. Is that really so much to ask for?
If ur Phone is running( means u can boot) try flashing cwr from rom manager and flash the rom again or try to hard reset the phone and then see ?
Firstly, I would start of by being more specific about what you have tried.
If you really have tried "everything", then there's nothing anyone can do for you.
I suspect you haven't tried "everything"...?
danger-rat said:
Firstly, I would start of by being more specific about what you have tried.
If you really have tried "everything", then there's nothing anyone can do for you.
I suspect you haven't tried "everything"...?
Click to expand...
Click to collapse
I'm sure I haven't, just what I found in the wiki
I tried the PASSIMG.ZIP and it failed
I tried Amon_Ra's Recovery and the only way I can get it to do anything is to tell it to flash in droid explorer and it just reboots and gets stuck. Now nothing is showing up file wise in droid explorer and I can't transfer the image onto the root.
When I could get into clockwork I tried flashing different roms but it would just go to a screen with the clockwork logo and get stuck.
amolji said:
If ur Phone is running( means u can boot) try flashing cwr from rom manager and flash the rom again or try to hard reset the phone and then see ?
Click to expand...
Click to collapse
I can turn it on to the screen with the multicolored X or the bootloader, that's it. How do I do a hard reset?
n25philly said:
I can turn it on to the screen with the multicolored X or the bootloader, that's it. How do I do a hard reset?
Click to expand...
Click to collapse
in the bootloader I think (dont take my rookie rooting words too serious) theres a hard reset menu under recovery. it will take you to another x and press volume up and power for the menu to pop up.
try fastboot a recovery image (either Amon Ra or CWM) and see if you can get back to recovery after that.
Well I'm assuming you already have a custom recovery since it came with CM and you've, as you said, flashed it (what exactly do you mean by that by the way? flashed another rom?). So all I can recommend is that you wipe a few times and try flashing a few different roms and hopefully one will boot. Not the best advice in the world but its always worked for me before and my N1 and my DEXT before hand when I've messed them up!
You still did not say what you flashed to your phone.
Anyways follow the restore to stock guide.
I don't know what this Droid manager thing is but don't use it. Install the sdk.....
OK I purchased a used G flex that was stuck in a constant boot loop. I've followed every guide all over this forum for restoring this phone or even the G2 threads as well. My phone is the ATT D950 version. The phone thinks it's a D959 when trying to flash with the LG Flashtool 1.8.1. I've tried the custom DLL DGUP_8974 with the ATT LGD950AT-01-V20b-310-410-MAR-22-2014+0.tot and the JAN-25-2014+0.tot file too. Neither have worked at all. I fail at the same spot. The one constant thing that I've noticed is. The flash tool doesn't see the phones IMEI#. So I'm thinking it's completely F'ed right now. I use to be able to boot into CWM 6.0.4.8. But now it doesn't boot into anything but download mode. I've tried all of the different methods I could find and I'm at my ends with the phone. If no one has any other idea's to try. I'll just sell it as parts on feebay.
The only other screen I can see is a white screen with what looks to be 3 choices in Korean I believe. I don't know what any of it is so I'm assuming that won't help me either.
For any inquiring minds. I've googled, youtubed, XDA'd, and possibly checked any site that had a reference to fixing this issue. Every guide is fairly similar but an old or newer LG flash tool. I've used the original ATT DLL with the same results. All of the other post I've see are people succeeding pass my point of failure so I think the phone truly is done. And lastly I've tried multiple computers and cables.
Nobody has any idea's on what I could do next?
You could try the trouble kdz to get it booting, download one of the att flash able zips, then use freedom flex to get a recovery and flash the zip you downloaded. Not sure if that'll work, but seems like it should
kintwofan said:
You could try the trouble kdz to get it booting, download one of the att flash able zips, then use freedom flex to get a recovery and flash the zip you downloaded. Not sure if that'll work, but seems like it should
Click to expand...
Click to collapse
Thanks that's one thing I haven't tried and will when I get off work tonight.
By the way forgot my standard disclaimer....so I'm not responsible if this blows your phone up for good, losses the imei (which could possibly be gone already), etc. It's generally not a good idea to flash another versions kdz l, but don't think there's another option with you not having recovery, adb and the build.prop being wrong.
No problem man. I'm not a rookie to the flash game and I do understand the disclaimer lol. The dude I got this phone from who had flashed what looked to be a T-mobile rom and most likely caused this issue. I got it cheap so if it's screwed I'll just sell if on Feebay.
Please close up. I was able to get out my bootloop after discovering my phone still had CWM recovery working. I was able to restore my phone back to an older 4.2.2 rom that I had. If you're stuck and booting into a custom recovery I'd follow one of the recovery boot loop fixes. The one I use I flashed a zipped command that wiped a corrupt partition since I could get into ADB mode to push the files. If you have TWRP, it has an ADB mode that will allow those commands to work. But CWM people will need to sideload the files that will auto push the files needed to correct the corrupt partitions. As always folks, please back up before you flash anything. That's what saved my phone in the end outside of the partition clearing files sideloaded in CWM.