Hi folks,
I just ported this MOD from Galaxy S2 to our Note: http://forum.xda-developers.com/showthread.php?t=1235212&highlight=
So all credits go to LockeOn
I build a CWM flashable you find here: http://www.multiupload.com/5GCLWHZZ1V
Just flash with CWM App or in Recovery.
Have fun with it
I was waiting for somebody to make this Thanks a lot, but could you please upload modded zip to revert brightness levels back 'to stock' or so...just in case
Thanks again...
eybee1970 said:
Hi folks,
I just ported this MOD from Galaxy S2 to our Note: http://forum.xda-developers.com/showthread.php?t=1235212&highlight=
So all credits go to LockeOn
I build a CWM flashable you find here: http://www.multiupload.com/5GCLWHZZ1V
Just flash with CWM App or in Recovery.
Have fun with it
Click to expand...
Click to collapse
Thank you to both then! I'm now using Total Screen Control, but it's kinda overkill compared to this patch!
I flash it on firmware KK1 and struck with start up screen loop. How to undo?
Hi, i just tried out this mod on my Phone, so far it works good. But in my opinion is the brightness level still to high. Is there an option where i can adjust the brightness by my own ? Not only by the Slider. So maybe is ith possible that i can adjust some values in a line for the minimum and maximum level of brightness?
thx for help
KnutM said:
Hi, i just tried out this mod on my Phone, so far it works good. But in my opinion is the brightness level still to high. Is there an option where i can adjust the brightness by my own ? Not only by the Slider. So maybe is ith possible that i can adjust some values in a line for the minimum and maximum level of brightness?
thx for help
Click to expand...
Click to collapse
You need to decomile the framework-res apk, and adjust values in the arrays.xml
Will installing this CWM flashable zip delete my already modified framework which only has CRT-off?
Sent from my GT-N7000 using xda premium
desztan said:
I flash it on firmware KK1 and struck with start up screen loop. How to undo?
Click to expand...
Click to collapse
Go back to your last CWM/Nandroid backup
will you post one for KK9 too?
thanks
KKA=KK9
Gesendet von meinem GT-N7000 mit Tapatalk
Is this the same mod you included in V7 of rocket rom?
Chris X. said:
KKA=KK9
Gesendet von meinem GT-N7000 mit Tapatalk
Click to expand...
Click to collapse
Where do you base that on?
For example, there are 2 versions of this ROM:
http://forum.xda-developers.com/showthread.php?t=1365246&highlight=kk9
Do you mean it can be flashed on KK9 too?
What exactly are the differences then?
Thank you
I flashed this last night and would like to get back the stock icons... would anyone like to point me in the right direction?
Very useful! Thank you!
Related
Problem description:
Put you phone on flat surface, like table or keep it horizontally with face up and you will see, that auto brightness works as you expect.
Now if you take phone, and move it first to brigh, than to dark place. Screen will increase back light when you moving phone to brighter place, but will not decrease it in darker place (stick on high level), until you completely close the sensor or move it to completely dark place. Then back light will be set to minimum level.
This is by design by Samsung, but it really stupid and inconvinied.
With this fix auto brightness will not depend on phone orientation and timeouts set to:
Increase - 0.5 sec (stock - 3).
Decrease - 5 sec (stock - never, unless you keep it horizontally with face up or moving in completely dark place(back light may set from maximum to minimum level immediatelly)).
Warnings:
Apply to de-odexed ROM's only.
To insert this fix into Jkay or other modified framework:
1. Decompile ext.jar (Jkay) or services.jar (others).
2. Replace file inside with one, attached here.
3. Recompile.
4. Put it back to your ROM (do not use root explorer, make flashable .zip)
reserved
What files and by which order should I install?
Looks promising
Thank you
Sent from my GT-I9300 using xda premium
h20pt said:
What files and by which order should I install?
Looks promising
Thank you
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
If you run de-odexed LL5 just flash puma_update.zip
If you have Jkay framework, modify it yourself using attached file or ask author for implementing.
If you have another modifications altering /framework/services.jar and do not want to loose it - modify services.jar yourself or ask author (ROM/MOD developer) for implementing.
h20pt said:
What files and by which order should I install?
Looks promising
Thank you
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
only pumaupdate.zip
other files for developers or people that know, how to modify system files + one to restore to stock LL5.
Im using completly stock deodexed LL5 rom..whis mod i have to used to change the brightness setting
jothi2lingam said:
Im using completly stock deodexed LL5 rom..whis mod i have to used to change the brightness setting
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1578576&d=1356009447
lets give it a try and see ...
Let me see if I get it...
In latest LL5 all I need to do is flash the puma_update zip file, right?
But if I do this probably something in my UI will change right?
And then I will have to flash my motomoto theme again.... that will change my brightness back to stock...
Is that right?
The stock auto brightness DO bother me.... actually I am looking for something below the minimum in dark places....
Does this mod goes below the minimum?
pride_kr said:
Let me see if I get it...
In latest LL5 all I need to do is flash the puma_update zip file, right?
But if I do this probably something in my UI will change right?
And then I will have to flash my motomoto theme again.... that will change my brightness back to stock...
Is that right?
The stock auto brightness DO bother me.... actually I am looking for something below the minimum in dark places....
Does this mod goes below the minimum?
Click to expand...
Click to collapse
Not sure.
It should not affect UI, but All tasks for multi-view may be affected.
In this case you should re-compile services.jar, replacing PwerManagement.smali with one attached or ask author of the mod for implementing this mod too.
Hey man nice mod. I am on LJ2, what do i exactly do? I'm a bit confused on the installation. Perhaps you can shed more light about it
Sent from my GT-I9300 using xda premium
saywhatt said:
Hey man nice mod. I am on LJ2, what do i exactly do? I'm a bit confused on the installation. Perhaps you can shed more light about it
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Not compatible with LJ2.
Which one should i flash?
GT-I9300 cihazımdan Tapatalk 2 ile gönderildi
furkey said:
Which one should i flash?
GT-I9300 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Same attachments re-uploaded with new file names.
JKay
Thanks for the great work but, Can smbody modify the JKay ext.jar and post it here plz
m4ever007 said:
Thanks for the great work but, Can smbody modify the JKay ext.jar and post it here plz
Click to expand...
Click to collapse
I'm using it.
The problem - Jkay disallow publishing modifications because some people applying it, than ask him for support.
Sometimes issues related to modifications, but not original framework and he truing to reproduce and fix something, that not exist in his framework.
You can use one of attached .rar (there is one for Jkay14.5.x and one for stock based modified ROMs) file to make it yourself.
It really easy.
Just backsmali, replace file, smali.
---
This is file from my phone. WanamLite Stock deodex LL5 + Jkay.
Thanks for the code for adding it in jkay framework.
Will try it soon
Sent from my GT-I9300 using xda app-developers app
awesomeness atleast someone found it out i was notice on the XXELKC, thanks for the fix
Reply from Jkay:
http://forum.xda-developers.com/showpost.php?p=35828235&postcount=3288
just tried on arhd 17.1
works just fine
JamMasterClay has made a universal version of this mod...get it here
Great idea and thanks for this. Really hated the button hovering over my keyboard in chrome. Typing this while able to see the return key of thumb keyboard is fantastic. Nice job.
Very great idea.
it's working perfect thanks.
The GT-8000 after installing this Mod. you lose the phone!
@bjbinc
this mod. you can have for the GT-8000?
ddborello said:
The GT-8000 after installing this Mod. you lose the phone!
@bjbinc
this mod. you can have for the GT-8000?
Click to expand...
Click to collapse
oh dear hope that is fixed, thanks for posting this before I flashed it. Will keep an eye out to see if this is fixed.
ddborello said:
The GT-8000 after installing this Mod. you lose the phone!
@bjbinc
this mod. you can have for the GT-8000?
Click to expand...
Click to collapse
Lol I hope you backed up first
Send me your framework-res.apk file and I'll mod it.
After flashing the milti buttoin zip, It caused my tablet to go into a bootloop Thank god for backups
nnjwy said:
After flashing the milti buttoin zip, It caused my tablet to go into a bootloop Thank god for backups
Click to expand...
Click to collapse
What device/firmware
Great mod,that big multi-window button was a hindrance. Downloaded and flash with no issues. I'm on Something ROM. 4.1.2 with an 8013 Note.
In order to make a 8013 framework work with 8000 you have to go to the res/values/bools.XML and change phone and SMS capable to true so it would show phone
Sent from my GT-N8013 using xda premium
Is there any way to move button in the status bar?
astro cat said:
Is there any way to move button in the status bar?
Click to expand...
Click to collapse
Not for me...all I did was replace a couple images....that would require some serious coding
bjbinc said:
What device/firmware
Click to expand...
Click to collapse
GT-N8013 Android 4.1.2 N8013UEUCMA3
Can somenone confirm it's working on N8000, 4.1.2 ?
Sent from my GT-N8000 using Tapatalk HD
Is it working on the CMA5 build for the N8010?
Here is the framework apk for it: http://db.tt/H0L7tC21
Can you post a tutorial or just the values you've changed?
N8000 4.1.2 XACMA1-DBT-deodexed framework-res.apk:
https://www.dropbox.com/s/852deuxbndmodl7/framework-res[N8000 Framework].apk
Did a backup in case anything went wrong and so far so good. Appreciate the aesthetic mod.
Is it possible to have this like a Xpose mod?
help for 8010
MaluNoPeleke said:
Is it working on the CMA5 build for the N8010?
Here is the framework apk for it:
Hello!
(sorry for my english...)
For the 8010 , we have to flash after installing the framework.
Is it work for all version of rom in 4.12 for the 8010?
Click to expand...
Click to collapse
BRAAComp said:
Can you post a tutorial or just the values you've changed?
N8000 4.1.2 XACMA1-DBT-deodexed framework-res.apk:
https://www.dropbox.com/s/852deuxbndmodl7/framework-res[N8000 Framework].apk
Click to expand...
Click to collapse
+1, seems like a safe (relatively :laugh option
thanks any ways!
Q&A for [ROM][Unofficial][5.0] CyanogenMod 12.0 builds for I9295
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Unofficial][5.0] CyanogenMod 12.0 builds for I9295. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
[thread deleted]
I'm running mythis latest build, incoming calls aren't working. Seems to have been a problem with jflte as well. apparently has been fixed by now. other than that no bigger problems.
bugs i found :
*cannot hang-up calls.
*no incoming calls while talking with somebody.
I love this stuff! This is a very great work. Thank you!
I am on build from 24.11. and i miss the reboot options by pressing on/off button. I must use a extra app to boot into recovery.
And my 64gb sdcard is not readable.
Something is draining my battery. I will take a look on it, and then I will report.
Greetings from Germany.
Gesendet von meinem GT-I9295 mit Tapatalk
Saalschlacht said:
I love this stuff! This is a very great work. Thank you!
I am on build from 24.11. and i miss the reboot options by pressing on/off button. I must use a extra app to boot into recovery.
And my 64gb sdcard is not readable.
Something is draining my battery. I will take a look on it, and then I will report.
Greetings from Germany.
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Read this and learn how to use hardware buttons to enter recovery mode
http://forum.xda-developers.com/showthread.php?p=56955843
... and download mode
Thanks, but I know this. I mean the comfortable function... Since update to build from 24.11. it works fine.
(edited)
My bugs:
- could not change notification (I could choice others, but it sounds everytime the same standard tone)
- could not change ringtone (same like notification)
- could not access 64gb sd-ext
- IR without function.
- found no cm option for customizing xD
I will change this post, if I find something more.
Gesendet von meinem GT-I9295 mit Tapatalk
f2fs
how do i format the partitions into f2fs?
Bluetooth doesn't work
This is a great ROM, but it doesn't work with bluetooth speakers. It would be great if you can fix this.
Thanks ) Have a nice day
On last build, IR does not work, I can't switch tones and how I can make screenshots?
Gesendet von meinem GT-I9295 mit Tapatalk
Is everything now working? Sms? Call?
Im new on xda. I want to root my active to 5.0 but im not so sure what will happen. Its my first time to do it. Any tips that you can share? Thanks
And lastly how to root this? Im on stock. I dont have the options on the tutorial like cwm? Can i use the one click installer? Or how? Many thanks!
Saalschlacht said:
On last build, IR does not work, I can't switch tones and how I can make screenshots?
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Screenshot as usual in android 4+, Volume down+power.
For IR, mine works (i use app "samsung ir universal" whit my dsl camera )
Switch tones? I use an mp3 like ringtone or nitification sound, no problem at all.
I don't know if it's the problem, but in the original thread of the porting, it's written that from last version it's necessary format system before flash.
I do it, and all works well except mic in handsfree mode
agfyabut said:
Is everything now working? Sms? Call?
Im new on xda. I want to root my active to 5.0 but im not so sure what will happen. Its my first time to do it. Any tips that you can share? Thanks
And lastly how to root this? Im on stock. I dont have the options on the tutorial like cwm? Can i use the one click installer? Or how? Many thanks!
Click to expand...
Click to collapse
To root you have to flash supersu from chainfire. Except for mic in handsfree, all seems to work well for me (oh, i can't use ncf in Italy, so i don't know)
How can I install the latest build? I download it but it is .md5sum, I only managed to install cm-12-20141122-UNOFFICIAL-jactivelte.zip with cwm, it looks great but i can't receive calls.
ThEpLaYeR001 said:
How can I install the latest build? I download it but it is .md5sum, I only managed to install cm-12-20141122-UNOFFICIAL-jactivelte.zip with cwm, it looks great but i can't receive calls.
Click to expand...
Click to collapse
Can you post a screenshot? Im so excited to the official release. I cant wait to see it in my phone. Im a fan of s4 active but i want android 5.0 on it
ThEpLaYeR001 said:
How can I install the latest build? I download it but it is .md5sum, I only managed to install cm-12-20141122-UNOFFICIAL-jactivelte.zip with cwm, it looks great but i can't receive calls.
Click to expand...
Click to collapse
Sorry but at this link (https://drive.google.com/folderview?id=0BzJzDM42pkRvZWtXWG5Gams0QU0&usp=sharing#list) i can see every build , as a zip and whit md5 check. In fact i has now latest build installed.
I'll post some screen
I clicked the same link but downloaded the other file, I don't know how I didn't see the zip one.
I feel so stupid right now...
No problem, happens to me too Whit Pac links some week ago ?
Some screnshot
sartana said:
No problem, happens to me too Whit Pac links some week ago ?
Some screnshot
Click to expand...
Click to collapse
it looks awesome on s4 active. can you help me how to do it? im newbie on rooting on android. can you help me? also is the sms and calls working now?
All working. except for bluethoot in car (some lags) and speakermode (there's a way to fix but only for user whit experience in android)
I assume you're on stock Rom, right? And you have int version i9295 (nor i537)
There are some passages to do:
1)download and install CWM recovery
2)download and install Rom
just follow this guide to understand Recovery mode and download mode
http://forum.xda-developers.com/gal...to-start-recovery-mode-download-mode-t2949209
to flash recovery follow this
http://forum.xda-developers.com/showthread.php?t=2752469
To flash Rom, simply download Rom and Gapps from thread, and grab supersu from this link
http://download.chainfire.eu/636/SuperSU/UPDATE-SuperSU-v2.37.zip?retrieve_file=1
Then copy all file on sd, go in recovery mode and do
1)Wipe Data / Factory Reset
2) Flash Rom
3)flash gapps
4)flash supersu
5)reboot and if recovery ask to fix root, tap NO
Enjoy (and don't forget to thanks all people in thread above, and me of course )
How is the battery life compared to the stock?
Hello..
I made a Stereo Mod with Headphone Boost for Lolipop 5.0.2 base on Z2 build number 23.1.A.0.690
and for CM12.1.
Test it by myself and it working..so I'm sharing it with all..
Please make sure you choose the correct zip file for you rom.
Hope you like it..
What is this?
With this mod you'll get notification and ringtone sound with both speaker. I also adjust the volume to make it more louder. Try and feel it yourself..
- How to install -
Flashable zip :
1. Reboot into recovery
2. Flash the zip file
3. Reboot
Download file :
Latest :
Stock Base ROM (23.1.A.0.690)
1. Flashable Stereo Mod with Headphone Boost V2
CM 12.1 (Tested on Resurrection Remix v5.4.1)
1. Z2_StereoMod for CM12.1
Older file :
Restore for Stock Base ROM (23.1.A.0.690)
1.. Flashable Restore Original mixer_paths
Restore for CM12.1
1. Restore Original Mixer Patch for CM12.1
the flashable zip has been removed...can you provide other link.?
edit: sorry...downloaded successfully
Links are broken!
zaryab360 said:
Links are broken!
Click to expand...
Click to collapse
Try again..it should be ok..
kumbangdesa said:
Try again..it should be ok..
Click to expand...
Click to collapse
Thanks!
PS: Working perfectly, both speakers sound equally and perfect! ?
Thanks once again!
can someone help me.. by mistakenly i deleted the original mixer_paths.xml file nd after flashing this mod everything went wrong and now there are no navigation keys, no notification showing. i also tried to flash the original mixer_path file but nothing helped me
deepu28792 said:
can someone help me.. by mistakenly i deleted the original mixer_paths.xml file nd after flashing this mod everything went wrong and now there are no navigation keys, no notification showing. i also tried to flash the original mixer_path file but nothing helped me
Click to expand...
Click to collapse
If you using preroot lolipop rom try to flash it back.
Or extract the original mixer_path and replace it into system/etc. Don't forget change the permission before reboot.
zaryab360 said:
Thanks!
PS: Working perfectly, both speakers sound equally and perfect! ?
Thanks once again!
Click to expand...
Click to collapse
Glad to hear that.
kumbangdesa said:
If you using preroot lolipop rom try to flash it back.
Or extract the original mixer_path and replace it into system/etc. Don't forget change the permission before reboot.
Click to expand...
Click to collapse
can you provide me original mixer_path file..i tried everything but nothing helped me...yes i did changed the permission but nothing happened
deepu28792 said:
can you provide me original mixer_path file..i tried everything but nothing helped me...yes i did changed the permission but nothing happened
Click to expand...
Click to collapse
I think reflash the rom again without wipe data can solve the problem.
can u explain us what is the difference compared to the stock one??
cotrec said:
can u explain us what is the difference compared to the stock one??
Click to expand...
Click to collapse
You'll get notification and ringing tone sound with both speaker. Also i had adjust the volume sound louder.
kumbangdesa said:
You'll get notification and ringing tone sound with both speaker. Also i had adjust the volume sound louder.
Click to expand...
Click to collapse
thanks buddy,,,,gonna try it
Thank you, this mod was my most wanted
Any chance to increase BT-volume ?
regards
Sent from my D6503 using XDA Premium 4 mobile app
@kumbangdesa, thanks for your good work.
Does this boost in-call volume too?
Thanks for this buddy ^^
So many are happy with this but less pressing the thanks for the OP as usual -__-
Given thanks is free people !
Sent From My Z2 On LP 5.0.2 Full Debloated !
bLack_Q said:
Thank you, this mod was my most wanted
Any chance to increase BT-volume ?
regards
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sublinker said:
@kumbangdesa, thanks for your good work.
Does this boost in-call volume too?
Click to expand...
Click to collapse
Pandemic said:
Thanks for this buddy ^^
So many are happy with this but less pressing the thanks for the OP as usual -__-
Given thanks is free people !
Sent From My Z2 On LP 5.0.2 Full Debloated !
Click to expand...
Click to collapse
I just update to V2. Generally it gain all the sound. Please test it friend..
@Pandemic.. Thanks mate.. :good:
kumbangdesa said:
I just update to V2. Generally it gain all the sound. Please test it friend..
@Pandemic.. Thanks mate.. :good:
Click to expand...
Click to collapse
@kumbangdesa
Anytime my friend
Sent From My Z2 On LP 5.0.2 Full Debloated !
Keep it up bro... :thumbup:
Works great my xperia z2 .
Beautiful sound but too loud ...
- flashed "2. Flashable Stereo Mod with Headphone Boost V2"
[MOD] S6_Volume_BoostHeadset+6.0.1_aTerminator_620F
[MOD] S6 Volume Boost 5.1.1 by AlexMailOne
Modified file for a nice boost to the audio fo S6.
Increasing the volume of the internal speaker and headphone during a telephone conversation and listening to music, increasing the sensitivity of the microphone, as well as in VoIP.
Flash zip of recovery.
MOD
Test
Well works okay on 5.1.1 stock. The calls volume don't make crackling sounds unlike in other volume mods which is good. Btw could you tell what values are changed?
Thank you for the mod
Boost
n.praveen13 said:
Well works okay on 5.1.1 stock. The calls volume don't make crackling sounds unlike in other volume mods which is good. Btw could you tell what values are changed?
Thank you for the mod
Click to expand...
Click to collapse
You find it easier to compare with the source files to see the changes.
Nice mod, Approved.
works good thanks
Can I flash this on s6 edge?
[MOD]
silvercat said:
Can I flash this on s6 edge?
Click to expand...
Click to collapse
Yes.
thanks you
worked on my G920I
do i need to intall all 3 zips or .... can some one explain to me what to install and how plz
morostep said:
do i need to intall all 3 zips or .... can some one explain to me what to install and how plz
Click to expand...
Click to collapse
No. Or the first or even more the second volume of the headphones. The third - a return to the stock settings.
What's the difference between the first and second zip? Thanks!
headphones+
JoeFCaputo113 said:
What's the difference between the first and second zip? Thanks!
Click to expand...
Click to collapse
In the second volume of the headphones is increased even more.
plz your help will it increase the incall sound of the speaker?
Can i use it together with Viper4android fx???
Gesendet von meinem SM-G920F mit Tapatalk
alfo2004 said:
Can i use it together with Viper4android fx???
Gesendet von meinem SM-G920F mit Tapatalk
Click to expand...
Click to collapse
I have not tested compatibility, but MOD does not make additions to the firmware and my MOD work and makes stock replacement as the configuration file. I think that will work.
bubu23 said:
plz your help will it increase the incall sound of the speaker?
Click to expand...
Click to collapse
Yes.
By how much does this increase the loudspeaker and headphone output over and above stock?
hpsauce37 said:
By how much does this increase the loudspeaker and headphone output over and above stock?
Click to expand...
Click to collapse
23-24%%
Do I need to be rooted to use this or how do I install?